How To Jump Car Starter Relay - Bypass Computer

[@Bay_Trekker]

I've been sitting in a customer's driveway for quite a while with a work van that wouldn't start. It's now 11pm and you just got me on the road and on my way home! THANK YOU!!! 😁

[@goodnewsrecovery5209]

Wow is this

[@leoatrulionking7772]

What kind of wire do I need, in a jam right now!

[@samspianos]

@@leoatrulionking7772 fencing wire will doit

[@andrewpropes3646]

Simple and sweet: Jump pins 30 & 87 on the Starter Relay. They are a standard configuration. Load side power and feed to starter.

[@hailshy]

Quick and to the point...thanks

[@WILLSHIP916]

Same 30 & 87 on all makes?

[@reliableweasel]

Man, I can't thank you enough for this excellent knowledge. Saving me a HUGE amount of knuckle busting and heart ache.

[@earlehunter7579]

I was about to add a new starter to my car I saw your video spent $15 and replaced the fuse car work perfect thanks you save me a couple hundred bucks

[@redingtonbee]

You rock dude. 3 and 5 are the ones you need for Toyotas. I just started my 2001 Toyota Avalon using a wire that I soldered a fuse spade to each and to better fit the relay interface. The kicker is that the immobilzer is now reset, and the car starts as usual.

[@doughboiblakhustle6950]

Hey bro I don’t know you you don’t know me but that Toyota’s 3 to 5 comment saved my life today💪🏿🐐

[@69saverok]

What this man said.

[@johnnybing91]

What about an 2002 pathfinder ?

[@narutogokumode]

@@doughboiblakhustle6950FACTS

[@richardjacques1731]

@@johnnybing91 To find out which pins work in a relay you need to do homework ahead of time. Pull a relay, then using a 9volt battery or even a cordless drill battery, energize 2 of the pins. When you hit 2 pins that make the relay click, you have found the low amp side. The other 2 will be the ones you need to jump. Of course this only works on a working relay so if you can't get one to click, use another one. The pattern should be the same on all relays in each car.

[@markizzo3919]

Simple and easy explanation. That was great.

[@Liberallez]

OUTSTANDING!!!! I've been trying to figure out how to do this without the "old fashioned" start relay mounted in the engine compartment. THANK YOU!!!

[@HenrysHowTos]

Your welcome brother!! No worries

[@wallace2157]

what if you don't have your keys

[@wallace2157]

what is that you used to start it is that a pair of tweezers ?

[@joemish4540]

​@@wallace2157I know it's old, but you use a piece of wire

[@stephenguerrero2934]

Wow, so no more climbing under the car and arcing the starter Excellent

[@reavesmo8060]

Dude. You just saved my damn ass. Holy shit. I can't believe this worked. '01 Impala with probably ignition switch and/or bcm problems. My intermittent starting car started with a paperclip. Holy shit. I had been stuck at work for 2 hours trying to start my car.

[@reavesmo8060]

@johnny Macon if you have a similar car to mine, maybe an early 2000s GM, or honestly any car that's old enough you can do some repairs yourself, do yourself a favor and replace the ignition switch. That thing was fucking up EVERYTHING. Turn signals, warning lamps, stuff you couldn't imagine having anything to do with an ignition switch. I replaced the part for 28 bucks off eBay.

[@reavesmo8060]

@johnny Macon I would say if you think you can do the repair definitely change that ignition switch. The parts you can get dirt cheap online are a lot of times just as good as the AutoZone stuff that's 5 times more. It's kind of a pain in the ass popping the dash and crap off but it doesn't take any real skill, just time. And my car was throwing tons of codes too (they actually sell really good diagnostic tools now for under 100 bucks that Bluetooth to your phone), a lot of them related to that stupid switch. It had some kind of short in it and the way everything is wired together it ended up causing major problems before I fixed it. I was hesitant at first because I didn't want to get in some situation where I screwed up the antitheft system and had to have it towed to a dealer and pay a grand. But it ended up being a 28 dollar fix and not hard.

[@petermorton2869]

Thanks Very Much Appreciated my son saw your video clip & started the 2003 PT Cruiser for me with a piece of wire & instead of getting a trailer or tow truck as my Transponder on the key wouldn't start at all & later my wife is going to get another Key & then getting it programmed in & will cost money to I wanted to wire up the Starter Relay with a push button switch & it would be very easy to do that & a hell a lot cheaper to do it this way but no she wants to have a another key & have it programmed in you can't with women they want it their way & cost more money oh well that's life I suppose Kind Regards Peter PS Thanks Again For The Info solved my problem in getting the PT Cruiser home

[@CathaxisDragonheart]

Going to try this on my 2000 Mercury Grand Marquis when I get home!!!! Gear range sensor went out, leaving it stranded in my driveway. This could be a lifesaver!!!

[@marwarashid8401]

Same happened to me today 2003 grand marquis

[@bseries8826]

@@marwarashid8401 did it work?

[@admk69]

When one does this they may need to, as was the case with myself; rev the engine. You can do this by yourself: At the right side toward back of engine there is a throttle cable. There you can rev the engine to help it start up... thanxs 4 the VID XD

[@h22greg]

Short and to the point. And it works every time!

[@OldStyleGarage]

Thankyou!! Was stranded on the side of the road nothing around me and was starting to get windy and raining definitely seemed like a scene from a horror movie thankgod now I'm on the road again!!

[@LMXD4L]

WILL THIS WORK ON A 2000 VOLVO S40 TO GO AROUND HAVING A NEW TRANSPONDER MADE FOR THE TIME BEING?

[@daniellelara3020]

Is this for when your starter relay goes bad?

[@kimberlyelder6753]

If the numbers are different how do i know which ones to jump between? I have a 2014 Kia Soul.

[@ace241030709]

I found that after you start it from the relay with a pin put it in neutral then drive then back to park, then cut it off. This resets the computer because sometimes the starter and ignition won't engage if the computer thinks the car is in neutral, and that sometimes happens after youve changed your relay. Now it should crank with the key providing you have replaced the needed parts0 (starter, relay, etc).

[@D_Rell8]

Wonder will this work for a 2008 Saturn Aura XE? No crank no start good battery

[@ace241030709]

@@D_Rell8 yeah it's probably your starter or either the starter relay in your fuse box

[@ramonjosegarcia8812]

Wow. That was a fast direct to the point video. Excellent!

[@gogocube3924]

I got a 89 vanden plas and I'm about to see if I can't bypass the weird security that just started to give me hiccups Edit: it worked!!! I just have one question, if your gonna wire in a push button what size wire would you recommend?

[@fonz1anddone713]

will this work if car isnt cranking from bad starter? Just making clack sound when turning key to start it. my starter works occasionally lately.

[@MCurtis-vc7ov]

Thank you. Great video. Needed a bypass after reversing jumper cables

[@FKBUSH1]

What? Henry helps with cars too??? I'm so used to seeing u cook! Looking for info on jumping relays, and u pop up!? Nice. My problem is that my start relay has no numbers on it. What now??? Lol

[@jayglass9504]

Mine had it on them for a 2004 Kio Rio Cinco, maybe google the make/model of the relay?

[@herbgarratt]

___WARNING___ This works EVERY time Even when the car is in gear. Kapiche!? MAKE SURE THE CAR IS IN D OR P __BEFORE__ DOING THIS, or it'll rundown whoever/whatever is standing in line with it. For extra safety, try to put a competent person in the driver's seat BEFORE doing it, and tell them NOT to touch anything unless the car starts to move immediately its cranked.

[@paulpurcell3865]

Good comment Herbert.Not everyone knows a vehicle,automatic or manual could jump forward if not in neutral.

[@mrslibra9115]

Where do you get the little wire you used to start it

[@danielm94437]

two screwdriver trick would just fine... bridge them

[@richardjacques1731]

At the wire store.

[@paulklt]

You are a life saver man...

[@jayglass9504]

Worked for me, 2005 Kia Rio Cinco Manual, think I still have some other slight issues but better than keeping on cranking key and holding clutch and brake in! Thanks man!

[@aarontart52]

jay glass same thing happens with my 2002 Kia Rio cinco automatic

[@angiezarrelli4482]

Is it a wire? Lol what did he use to touch it witj

[@ssgusa]

@@angiezarrelli4482 just a 12 gauge wire

[@AmolPatil-qg6gm]

Is the same Number 30 and 87 in all starter ralay?? Great explanation👍👍👍

[@HenrysHowTos]

Yes correct

[@Doggsbody1]

It depends on the model mine was 1-5 but what a brilliant idea to come across l tried another relay the same lay out just before this, the relay didn't work l just tried this straight after n bam it was trying to start, I've stripped everything including the original relay what looked good inside but obviously wasn't. I can't say it started just yet as it's a bit too late to give it revs to pump the fuel through as my neighbors would complain, but l will certainly try again tomorrow n comment if it runs or not 👍

[@Doggsbody1]

But as l did look at the points Henry used look at yours n match them up.

[@derekcrymble9085]

Great ! But what if there is no picture of the location under the cover ? My 2002 xk8 does not show it . I can't find any info on which one it is. Can you help? Many thanks.

[@MathieuTechMoto]

Very helpful information, i have a Smart fortwo that for whatever reason refuses to turn over from time to time, that's a lot better than getting under the car with a screwdriver

[@2kjOU3oZxbiox82]

my car does this, it will only start by using bypassing starter relay. i've gotten new starter relay, when using a multimeter the old and new one still work but whenever i plug them in, it wont start unless i short it. Any ideas what it could be?

[@shanezahirski7917]

What was it doing before you decided to do this my Mrs commy will every now and then give a single click when she tries to start it I've done battery and starter motor,?

[@thecabindoctor2024]

Worked on my 2008 Santa Fe. Thanks a bunch

[@canadapainter658]

How to start it up without ignations keys,., Can it be done as well? using started relay removal?

[@liveuntetheredmusepodcast4832]

Nice job! Thanks for sharing the video and taking the time to make it!

[@honchohoudini3747]

IMO..You can also buy an aftermarket relay and take the cover off of it and tap the side of the relay, works the same instead of sticking something in the fuse box..

[@richarddubie5945]

Will it work if my transmission range sensor is malfunctioning on a ford transit 250

[@carlclancy3675]

How I start a 04 mercury grand Marquis without the relay box?

[@underalions2023]

My mates VT Commodore. Has no crank no start. I put all new fuses and relays in . His starter motor is almost new. When I do this bridging pin 87 and 30 . I get it to crank it's starts . But don't keep running. After it starts it runs for a few seconds . Then just switches off. Could this be because he has virtually no fuel in his petrol tank. 5 KMs to empty . His computer fuel reading is pretty spot on. If anyone could give me the answer to what issue is . Id be very grateful

[@wow-nn3tu]

Yo I think I did the same thing but in fg falcon about to test this tomorrow because I think it's my ignition barrel it's got nothing on the last turn. I had about 30kms left so I thought it was fuel as well

[@elduende367]

Crankshaft Position Sensor or ? ...

[@poKey_Poke]

What are you using to stick in the relay holes to start the engine? Can it just be any metal tools?

[@HenrysHowTos]

I’m just using a wire, in an emergency and conducting metal will do the job

[@dalsenov]

There is an interruption in your video exactly when you could explain how you chose 30 and 87 out of the for numbers. Maybe this is valid for a certain car model but this it's not a general rule.So can you explain?

[@anon3948]

jumping 30 and 87 is applicable to all vehicle makes & models

[@calebpancione1818]

Hey I've got a vz that has the wires hooked up to this with the button hooked up under my steering wheel does it have to be connected to the wires under the starter relay? Because it won't crank over at all just a clicking sound

[@jakkpotts6239]

I have a question I was wondering if you could help me with I have a 96 cougar V8 I changed the spark plugs it ran before that now all of a sudden everything works the horn works but it will not crank start turn over anything in the only thing it does behind my front passenger headlight is the relay control module and it just clicks do you think that could be the problem

[@leapers124]

Will this work if the immobilizer isn't working

[@HenrysHowTos]

Yes it should

[@mikerichardson7074]

Cheers mate got the car going

[@Uri-s7p]

Does this work if the car is no longer recognizing the key?

[@eTheDrug]

What are the dangers of doing this too many times to your vehicle? Please respond

[@jessemichel7073]

Some guy did it for 2years now the car wont start.

[@HardWhereHero]

Okay so my 03 Silverado needs to do this in order to start but the relay is good. What causes this?

[@187th]

If I hook up the push button into the car does the relay have to stay in?

[@187th]

Can someone reply

[@brenthudsonphotographyvlog8450]

yes i have done that to mine never had problem

[@brenthudsonphotographyvlog8450]

but put relay back in with wires in 30 and 87

[@brenthudsonphotographyvlog8450]

with push button switch

[@brenthudsonphotographyvlog8450]

some relays run other things with the starter relay like my 2006 holden like the svs

[@Sas_Kat]

Did it, worked, turned it off and started it again with just the key and it worked. Is that it now, will it keep on working with the key?

[@tammyjohnson4429]

shmoopywoopy is this option still working for you and also did you leave the wire there? Please answer thanks

[@JodBronson]

+Tammy Johnson - DO NOT LEAVE THE WIRE IN THERE AFTER DONE !!! TAKE OUT ASAP !!!

[@JodBronson]

See my Video here... Maybe you will understand more :) LINK: kzbin.info/www/bejne/rarGnYx8aqhmp5I

[@Apathymiller]

Can you do this with a manual with 1 person?

[@Jaikleparis]

Do you think this would work on a 2001 Camaro????

[@josephcottone9613]

That’s funny. I’m trying to diagnose my GTO no start. I was pretty sure the pins I wanted were 30 and 87. I googled “jump 30 and 87”. First thing I clicked on brought me to another effin Holden lmao!

[@stefanielawrence4231]

Will it Work on Push to Start Cars?

[@HenrysHowTos]

I’m taking a guess that it should as it would use the same concept to start the car

[@jayglass9504]

Worked on my Kio Rio Cinco - a manual (push to start(if need be))

[@jakkpotts6239]

How did you know it would be 30 and 87 is there something that tells you that how would I know on my 96 cougar cuz I'm having a problem with it starting and I can't tell if it's that or the relay control module

[@HenrysHowTos]

It’s the same on all relays

[@jakkpotts6239]

@@HenrysHowTos thank you so much for the quick reply hey let me ask you a question I have a 96 cougar and as a good battery every time I turn on the key nothing starts it won't crank it won't do anything except the relay control module behind the front passenger headlight clicks do you think that that could be the problem

[@EddieKavna]

Thanks mate! Is it normal for the powertrain warning icon to stay on? Mine's a VZ Commo. I started it again and the warning came back...had no powertrain warning before.

[@HenrysHowTos]

It would really depend on what issues you have. I’d use a scan tool to see what error codes come up

[@EddieKavna]

@@HenrysHowTos Having the same model, I just wondered if it had happened to you. Probably fix itself when the ecu is repaired.

[@nellybones7]

Great video bro 👍🏾 thanks

[@_g35foelife_26]

Does someone els need to turn the key while you put the wire or does it turn on just by having it on the on position?

[@barlogdark]

i got my passat b6 with immo active error. how do i start ignition not turn on engine cuz when key goes in nothing happenes except errro immo active?

[@tonycarl465]

What if stater is no good ...dose this still help

[@bobbythomas2782]

You helped me out as well. Thank you!!

[@johnnybing91]

What numbers for a 2002 nissan pathfinder ? I don't have double digits on my relay.

[@Andrea-ly5op]

Tried your suggestion and it tries to start but won't crank. What could be the issue?

[@TexasPete762]

Probably needs new starter

[@shepheardadi4329]

What is that wire that you used?

[@theydontknow806]

Looked like a #12 stranded Copper wire to me. I did this same thing to mine with a #12 solid Copper wire.

[@sigmatricky8582]

@@theydontknow806Did you put the wire on 87 or 30? or either one is fine?

[@msaintjo]

@@sigmatricky8582 you have to put on both for it to work. Some people use a paperclip.

[@Yvnggoonxl]

What was that wire you stuck in the plug in ?

[@HenrysHowTos]

Just a wire I had laying around, any piece of wire will do the job

[@sunnymoe6235]

Thank you sir that's video very helpful

[@JuiceWRLD99969]

I have got a vz with this exact problem there is a wire coming out from the fuse box you have to have in on the battery to start it then remove it how do I fix this problem???? Need help

[@CJ-ss6wk]

Didn't work on 06 GTO. I thought there the same as Holden?

[@baileynicholas797]

Thansk mate this really helped👍

[@marsievlog1965]

Hi! Will it work in Ford escape?

[@HenrysHowTos]

Sure will

[@Jowdeeroww]

Ran out fuel and starter wouldnt run long enough for it to start! This Solved everything. Thanks bro! PS love the food how tos!

[@gnomecano687]

what happens if you imobilize it lol, tried this and didnt start and seems to have made it worse. 2006 dodge charger 3.5v6 for ref.

[@crystalramirez1686]

Will this work if you have a buy here pay here car gps thing in it and they shut it off??

[@HenrysHowTos]

I doubt that

[@TargetedTV2025]

I have a 1996 Toyota Avalon and I'm trying to jump-start it because when I turn the key nothing happens. I was told it was my starter. When I try it your way it doesn't work or I'm doing it wrong. Can you please help ASAP?

[@shamikajustice9668]

Wat is the wire he using??

[@TargetedTV2025]

@@shamikajustice9668 just a piece of wire. Nothing special

[@shamikajustice9668]

It didnt work for my jeep either just the fan came on

[@Maggie-Gardener-Maker]

EXCELLENT! BRILLIANT! THANK YOU!

[@MrKontiya]

awesome video, helped out alot. thanks mate

[@ThePerpetualStudent]

Help: I did this on my 3rd Gen 4runner to see where my issue was at. Now I have lost all electronics. Did I blow a fuse?

[@realwilky]

man i just did this on my 98 ford ranger and have no electronics either now. what happened with your car? were you able to fix it? any help would be appreciated lol

[@ThePerpetualStudent]

@@realwilky I am so sorry for the wait. I realized that it did not send. It was just the battery. I tried the procedure in the video muyltiple times and it just sucked the battery dry. Replaced the battery and all back to normal

[@realwilky]

@@ThePerpetualStudent hey no worries, figured out my battery was done for too so it’s all good now

[@kerwinmason4406]

You're the man👍👍

[@brenthudsonphotographyvlog8450]

many thanks for the the tec on how to start car with out relay i put a push button in line as the computer in my holden will not start car and the computer for the car is worth $800 cheers for that

[@normmak2493]

Brent Hudson are you able to post a picture or video of your push button as I would like to do that to my vz but not sure how to go about it

[@brenthudsonphotographyvlog8450]

run the 2 wires to the relay to push button switch to 87 and 30 then put relay back in with wires still in where relay gose because on the holdens the svs will come up if you dont do that as relay runs other things i have not had any problems

[@normmak2493]

Brent Hudson thanks for replying mate I appreciate the information and that sounds like the best idea right now as I don't have the money to diagnose and fix it just yet and people look at me like I stole it when I pop the bonnet and start it at the relay in public lol

[@gerlandkent6377]

[thank, you for you're helpful info.]👍

[@KKCUSTOMS12]

Where do I get that spark piece

[@paulsoutbackgardenaustrali7674]

Henry I did this trick but the new inhibitor switch does not correspond to the gear I want..like drive is neutral and 3 is reverse...I installed it when it was in neutral...other thing now the power seat fuse is making a clicking sound...any idea..it's on a commodore vt 97 mod...thought I can fix it rather than driving 80ks to get it looked at plus starting it when unsure how it will go..maybe in a gear.pls help.thnx

[@HenrysHowTos]

That’s really strange! They shouldn’t even have anything to do with each other so it’s quite puzzling! Wish I could help but I wouldn’t even know without seeing it in person

[@paulsoutbackgardenaustrali7674]

@@HenrysHowTos thnx but a frnd got me onto someone but I need to risk driving to town..I think reverse is drive or N and others watever gear...middle of nowhere but at least it starts...going on Tues get it fixed.thnx anyway

[@electronicaautomotriz]

chido my henrys saludos desde mexico

[@bradgrube4374]

Do you know what would be very helpful with this video? If you were to explain where the pins 30 and the pin 87 are coming from or going to. The reason is because on my starter relay, I don’t have a pin number 30 or a pin number 87 however if you were to explain which one is coming from the battery which one is coming from the ignition and which one is going to the solenoid and which one is going to the ground. If I had to guess you’re pin number 30 is coming from the battery, and of course your pin number 87 raised to the solenoid. Just a suggestion, and only because you can’t ever assume that any little or big part may be the same. All that being said, this is a great hack, great video, I hope I don’t blow up my car! Lol

[@HenrysHowTos]

Great question! Ill add it below 30: Positive coming from battery terminal 87: Positive going to the device 86: Positive from trigger/switch 85: ground/negative

[@vickykenny1328]

@@HenrysHowTos if the numbers 30 n 87 are on the relay will it always be 30 n 87 or is it all different for every car

[@HenrysHowTos]

@@vickykenny1328 Yes, all relays operate the same whether in a car or something else

[@vrilthisc368]

Thank you,that was a great video👍🌴

[@normmak2493]

Hey Henry I have been starting my vz commodore like this for the past 2 years I hooked up a wire and ran it into the car and connected a button so I just turn the key and flick the switch and it's been working fine up until today I went to start it and nothing I turn the key on and nothing doesn't crank or anything dash lights come up but that's it windows wind down and all but it wont start would you have any idea of what I could do?

[@MC-ox1un]

toosuspicious. So did you do this because the starter has gone bad?

[@jessemichel7073]

In 2years couldnt save up to fix it geez wow.

[@teriqherring3326]

Does this work on a Nissan Sentra 2017?

[@6980869]

Hey man, thanks for sharing. I have one question though, after you took out the relay, the video cuts out, and then it starts up again, at what seems to be right in the middle of you explaining how you got to the two numbers 30 and 87. I'd like to know - why were those numbers used to determine what terminals were needed to be connected for it to start the car? Thanks in advance, & thanks again for sharing this video. Have a great day. Aloha... Hanu

[@joshualawson7604]

Those numbers are standard. Not sure of why but regardless of the make of your vehicle this should work.

[@Easton21]

Yep, this is true. Not just a starter either. Fuel pump relays are the same. They're like this on Chevy, Ford, Toyota, Mercedes, and I'm sure others.

[@strider5119]

I think it's because that's the positive and negative, the other 2 might be a fuse or a switch of some form

[@queenkea2554]

@@Easton21 what kind of wire can I use plz help

[@porkrub2191]

What if I can't turn my key I got a key replaced and it won't turn my ignition I know it's the right VAT code it had wind previews owner and she had all the paperwork from what she had replaced ignition was never replaced and I got this key from the dealer but they said sometimes when they cut it it doesn't work

[@HenrysHowTos]

This actually happened to me once! They cut the key, but they didnt cut it properly and it would not work!! Get the key checked, or you would need to get the ignition barrel replaced which would include new keys

[@brianramirez932]

Hope all is well. I tried jumping the starter relay and it just cranked and didn’t turn over. Any ideas why?

[@HenrysHowTos]

If it doesn’t turn over next thing I’d check is your fuel pump, fuel pump relay etc

[@brianramirez932]

@@HenrysHowTos sounds good thank you so much!

[@Sas_Kat]

Awesome!!! It worked!!

[@micthegreasemonkey2918]

Hay man good vid ! Ive got a commodore aswell (vx) my a/c. isnt working & wanted to jump it @ the a./c. relay ! Any idea what pins i need 2 join. Thought i would ask u science u would know what relay i am referring 2 as it is a bit smaller than the other relays in the fuse box..

[@HenrysHowTos]

It would be the same principle. But you’d need to diagnose and see why it’s not working. There’s a lot of components in a cars A.C. system

[@bribailey8894]

I’ve done this for a while now, what happens when it no longer works, can I just replace the relay?

[@j.rjunior5584]

If the breach works, than yes replace the relay. Super easy too do.

[@ravenia26]

What is that plastic piece used

[@JodBronson]

+Ravenia Robinson - It's just a Wire Stripped and the Plastic is the Coating of the Wire to prevent Shock! You can actually use a Paper Clip too :)

[@vibuy9231]

Why isn’t this working in my manual , it only keeps cranking ?

[@Runitup9992]

You think this will work on a Chevrolet Corvette if the bus lines are open

[@qasimrasool9118]

if you connect 85 and 86 together, wouldnt that also work?? (assuming there's nothing wrong with the relay)

[@757ShadowLoon]

I accidentally did 30 and 86 and got spark.Does that definitely mean I fried my computer?

[@pjwill1077]

What did you use to push down in the starter relay plug? Can I use something around the house to do that?

[@solidg3649]

That’s what I’m trying to find out lol

[@tinytim9453]

Small wire, paper clip etc.. might get shocked with paper clip.

[@ssgusa]

12 gauge wire is best

[@victorVQ]

Thanks great video 👍

[@jakkpotts6239]

Do you know where a starter relay switch on a 96 Cougar with no alarm system is the car is a v8 I cannot find it anywhere and there's no information on Google or KZbin and I even called the Mercury dealership service and parts department and I cannot get an answer I need your help please

[@HenrysHowTos]

It would have to be either under the hood or inside the car somewhere The manual should give info about where the fuse boxes are