🥰 How to Layer Heat Transfer Vinyl for Beginners

[@DesignBundles]

Watch Next 😎👇 🥰 How To layer sublimation and HTV kzbin.info/www/bejne/aaevfHmHjp50ipo ❤ How To Layer HTV With Your Cricut Easypress kzbin.info/www/bejne/jKKXl4WZjL13oLs 📱 Multiple layer SVG Cricut Design Space App On The Ipad kzbin.info/www/bejne/mJjKdoeabrqJhrM

[@debellis9338]

I have had my Cricut for several years now and been intimidated by layering more than a few layers. after watching your informative and helpful video, I just layered 6 layers and it is a beautiful shirt! I am ready to tackle anything now! Thank you so much! Have a wonderful Holiday Season!

[@amyeethomas2495]

Thats awesome!! Ive had my air2 a few months now. I've done mannyyy single layer. I make my son a shirt a week lol but I've never done more than 1 layer. I'm going to after this . I have a bunch of pokemon svg I bought off etsy that I want to use.

[@crystalshappynails3982]

I just opened up my Cricut today. I have been watching tutorial video's for the last 5+ hours. This by far, has been the easiest, and best video for layering! Thank you!

[@DesignBundles]

Glad it was helpful!

[@GNLZN]

I’m glad to hear I’m not the only one that spend hours just watching videos before actually trying my first trial cut

[@montsegarcia4526]

@@GNLZN how did it go? I’m still watching videos 😭 meanwhile my maker3 is collecting dust (not literally) in its box 😂

[@rebeccayepez3651]

Thank you!! Your video is so helpful. I have been working with HTV for about a year and it still intimidates me!!

[@katherinemccord9643]

I have been pulling my hair out with a design thinking I couldn’t layer htv on top of each other. Back to the drawing board with great skills now. Thank you!

[@jennifers9634]

This was fantastic! I’ve only layered one project and after washing, all my layers peeled. I totally over-pressed!! Because of this I never attempted another laying project. Gonna try another one after watching this!

[@DesignBundles]

Oh no, we're so glad we could help! Hopefully the next project is a success!

[@cynthiacameron9157]

This was a great tutorial. I just attempted my first layering following your instructions and my T-shirt is amazing!!! Thank you so much for sharing this information.

[@deannawalden3431]

I find this video better than another video I watched from someone else. You explained more better on the layering the vinyls and why in each steps. Thank you. Hopefully my next layering project will be better.

[@jessicaguzman6024]

Thank you lots for your advice, I’m making 60+ t shirts and I thought I had messed up but watching this tutorial helped me get the hang of it all,specially heat pressing!

[@christijones7814]

Thank you so much for this video! I bartered some work for a Scan N Cut from a lady who didn’t want to take the time to learn how to use it. I’ve had it for about 3 yrs and just recently started trying to use it for HTV. There is almost zero videos on how to use that brand, but this video is so helpful I think I can knock out some Christmas gifts. Also, I think I’m going to put a Cricut on my wish list!

[@DesignBundles]

Thank you so much for your feedback, Christi!! ⭐️⭐️☃️☃️🎄🎄

[@bridgetb5928]

OMG!!! I've been layering so wrong! I'm glad you posted this video. Now I won't get all the crease lines from over heating! Thanks for the advice

[@DesignBundles]

Glad it was helpful Bridget!

[@iosfangirl]

Thank you for the video! My Circut will be here tomorrow

[@DesignBundles]

Best of luck and happy crafting! - Dawn

[@GirlArmy21]

Exactly what I needed today. I didn't know that the Cricut separated the colours. I was using the "hide eye" buttons. This is so much easier. New Cricuter. XO

[@DesignBundles]

Hey there!! Welcome and we're glad you found us! We have a helpful Facebook group as well: facebook.com/groups/1930716583871665 If you have any questions, just shout! We are here if you need us! -Dawn 🙂

[@beverleyhatton3041]

This tutorial gave me more confidence to get started! Thank you as you made it seem simple!

[@shannonmorton7544]

You are AWESOME… finally someone made it make sense … Thank you!

[@DesignBundles]

Glad it helped!

[@mariahoff5546]

Thanks soooo much it helped me a great deal. My daughter asked me if I am surprised how good it came out and I said I am always surprised when doing things with the Cricut. Thanks for the video.

[@DesignBundles]

I'm so glad!

[@andreacole7065]

Thank you so much for this break down! This was extremely comprehensive, I appreciate you!

[@DesignBundles]

Glad it was helpful!

[@sabrogers]

I finally can try layering vinyl. Thank you so much!

[@maritadutoit7316]

Cute doughnut 😂🤣

[@vbelenpe]

I love your explanations. You're very clear.

[@DesignBundles]

Glad you think so!

[@jordanbailey6670]

Great tutorial!!!

[@PrettyMess92]

This was the most helpful video I’ve watched so far. Thank you!

[@DesignBundles]

We're so glad to hear this video was helpful!

[@yvonnetaylor6187]

Thank you explaining this. I feel more confident now with trying layering.

[@verdajbastian4157]

Hi Becky, thank you for this! I just started using my Cricut and my next task is a t-shirt. This will help me a great deal. Thanks again...Have a great day!

[@DesignBundles]

Hey Verda! I'm so happy that this video helped! I'm sure you'll be great at layering and I'd love to see how your project comes out! Best of luck! ---Becky

[@star10589]

Great video. Thanks. I was having trouble finding a good one.

[@DesignBundles]

Glad we could help!

[@designwithkeisha2073]

Awesome video! I was having issues with lines on my design when doing layers. This video really helped solve my issue.

[@DesignBundles]

We're so glad we could help! - Dawn

[@gailloski7954]

I have been putting off layering a Christmas apron for my husband. Your video was great and I feel like I can do it, just in time for Christmas! Thanks!

[@savagemusket6318]

Great tip, thank you! pressed well the first time I tried it.

[@DesignBundles]

Hi there! We're so glad you found us and that your project came out perfectly! If you have any other Heat Transfer Vinyl questions, let us know. We are here to help!

[@TBruce1380]

Thank You! Great Explanation!😀

[@DesignBundles]

Glad it was helpful!

[@honeyyeyes]

what a cute design! great, detailed tutorial. thank you

[@DesignBundles]

You’re welcome 😊

[@Lvssa_b0o]

Thanks you so much! This really helps me! I’m business beginner. I have mess few things with htv but Omg. KZbin makes so much easier.

[@DesignBundles]

You're very welcome! I'm glad I could help! :)

[@ChingVillaflores79]

Wow amazing I'm excited to try. I'm just wondering cuz I do have only 1 mat

[@lethi3585]

just wanted to say that I just love watching these tutorial video with you Mz Becky you make it so easy to understand especially for me a newbie to this craft and for my new business Thank you so much for all you do, I'mma keep watch'n

[@DesignBundles]

Thank you Lethi, I am so glad you enjoy the videos. Best of luck with your crafting, be sure to let me know if you have any questions! ---Becky

[@stacypaxton3782]

I’m getting ready to may some bags and they are 10% cotton so sublimation won’t work so thanks for the tips!! 💕💕

[@pamgrat5126]

Awesome video

[@DesignBundles]

Glad you enjoyed it

[@felizonya]

Great tutorial. Thank you so much!

[@DesignBundles]

You're welcome! 😊 Thank you for watching!

[@nuyork77]

This is a great tutorial - thanks so much for sharing the technique involved.

[@DesignBundles]

You are very welcome!

[@lauriefilatoff9514]

Super cute! Great video!

[@DesignBundles]

Thank you 🤗

[@kingfiona3344]

THANK YOU

[@DesignBundles]

You're welcome, happy to help!

[@sabrinakod]

on another note, your nails are absolutely beautiful!

[@DesignBundles]

Thanks for watching! 😊

[@jeterisb10]

Thanks!

[@DesignBundles]

You're welcome! 😊

[@bkgoldoverseernana1291]

I like it! I'm nervous about it but I'm going to try it!

[@DesignBundles]

You can do it! 😍

[@stephanieprice5780]

Thank you Becky!!🦋

[@DesignBundles]

You're welcome, we're always happy to help!

[@kellyhayes634]

Thanks for the video. Super easy to follow! Can't wait to try this out!

[@deyanapichardo5986]

Thank you so much for this tutorial, it has given me an extra tip that I didn't know. Blessings

[@DesignBundles]

You are so welcome! 😊

[@webwarren]

Before I cut a multilayer design, I'm careful to slice away underlayers (e.g., cut the sprinkles out from the donut, the white irises out from the eyes, etc. This provides exact placement for every layer, without the extra bulk of multiple vinyl layers

[@DesignBundles]

Yes, definitely a good suggestion Brenda! I do that most times also, but that can be intimidating for beginners. We have a follow up video planned for more extensive layering techniques. Thanks for watching! -Becky

[@76artsychic]

Are the pieces on transfer tape? I. Confused what they are on to layer.

[@webwarren]

@@76artsychic HTV comes with its own transfer tape, but it's not one that you can remove the pieces from one carrier and put it on another. One of my process steps is to cut a paper stencil for placement. (This is done by attaching/welding all pieces to make them cut as a single layer, single color, and cutting that on light cardstock.) I'll then layer my weeded HTV on top of each other for placement. Then I'll position the stencil on the garment and, from the lowest layer (largest pieces) up, tack down my HTV (5-10 seconds), peel the carrier sheet, and apply the next layer. Once I have enough placement to be sure of my other pieces, I'll remove the stencil. After the last layer, I'll put a Teflon sheet over the entire design and press it for the entire length of time for the design. riffingoffcrafttrends.blogspot.com/search/label/delayering riffingoffcrafttrends.blogspot.com/2019/01/working-with-vinyl-scraps.html

[@frobbsy27]

THANKYOU!! Ur tutorial was so simple,straight to the point & defs leaves me feeling much more confident about the whole process🙌Great job girl! U got a new subscriber for sure❤

[@DesignBundles]

Glad it was helpful! Thanks for subscribing :)

[@v.dickson]

Thank you for making this simple. Question, for your vinyl cutout pieces, did you cut them individually through cricut?

[@janemoyle72765]

I get my HTV from Amazon. Can you tell me what the brand name of your htv is for layering? I'm new at this and want to do cool layering bags and T-shirts. Thanks!

[@DesignBundles]

Hi there! We recommend Siser HTV! - Dawn 🙂

[@ChaunaCasteel]

What is the difference between a transfer sheet and a carrier sheet? Can transfer tape be used on HTV?

[@itsRozeyBoo]

Wow! Literally the first video that has talked about the shrinkage issue!! Thank you! Also the temperature you used is 320 and the Cricut heat press guide says 315… i feel like when I layer w 315 degrees I have to press for at least 15 sec to get it to stick… I’ll try your temperature next press! Thanks again

[@DidiAnn1]

Great job!!

[@ashleymckenna1934]

This video was so well done and easy to follow. Thank you!

[@DesignBundles]

You're welcome, glad it was helpful!

[@Scrapin2012Designs]

Thank you for this video I found out what I was doing wrong.

[@DaysOfSodaAndLantana]

What were you doing wrong?

[@aprilhenson7257]

Thank you SO much for this video!!! Was incredibly helpful!!

[@DesignBundles]

Glad it was helpful! 😊

[@any92708]

I had a question regarding the actual step of transferring the image to the actual paper. The actual vinyl can you go over that part how to do the design in the cricket after you created after you make it how to put the vinyl in the cricket thank you so much.

[@ashleyparker989]

Any tips on how to know what size to make the designs for each size shirts? Is there a video or anything to help?

[@DesignBundles]

You will want to measure your shirt, for each shirt size you will want to adjust your design accordingly. For instance, a design size that would be great for a kids shirt would not fill the space on an adult shirt.

[@joshuajames9224]

Great explanation.

[@DesignBundles]

Thank you for watching!

[@marisagarcia9277]

Thank you so much for this tutorial. I love your videos.

[@MrCharliesangel]

Watching this video could’ve saved me a whole lot of heart ache. 😂

[@DesignBundles]

We're always happy to help!

[@anitra7747]

Very thorough tutorial! Thank you.

[@DesignBundles]

Glad it was helpful!😊

[@tammyfisher9809]

Great tutorial! You make it look so easy. I'm still scared to try it 😩

[@DesignBundles]

You can do it!

[@dallaswalker750]

Why oh why ... do I not listen and watch carefully !! ... I have wasted an abundance of vinyl ! ... Thank you for this wonderful video :)

[@xvalleygal]

LOVE your shirt!

[@DesignBundles]

Thank you!

[@battonjoyce]

You have cleared up.layrering tremendously! If only you know how much. JOYCIE in Park Forest

[@DesignBundles]

I'm glad this video helped! :)

[@1freedom_baby]

Do you need a cricket to do layers or can you with a different machine is it the software that lets you cut layers.

[@michellen9241]

This was so helpful!! Thank you!

[@DesignBundles]

Glad it was helpful! - Brittany

[@danitigges6105]

very helpful! Thank you!

[@DesignBundles]

You're welcome! Thanks for watching! 😊

[@diannashton4787]

This was great tutorial easy to follow.

[@DesignBundles]

Thank you Diann! I'm glad you enjoyed! ---Becky

[@amandajungkuntz]

what is the difference of attaching and welding? What is the deciding factor to do one over the other?

[@DesignBundles]

Hi Amanda! The Attach tool keeps your shapes in the same arrangement when you send the design to the mat to cut. The shapes are still separate pieces, but their layout is frozen in place. The Weld tool unites two or more separate shapes into one single shape. Hope it was helpful - Agata

[@Avrilhandler]

Is there a video with the beginning steps somewhere? like how to upload the actual image to get it to show the layers in design space?

[@AbbyDee1015]

If your HTV is meant to be a cool peel (I.e. the paper studio brand I have), would you still warm peel as you layer?

[@DesignBundles]

I would follow the recommendations of your HTV. If it is meant for a cool peel, I would just cool peel each time. 😊

[@tammympearce]

How do you not get marks from the carrier sheet for layers. In experiencing these pressing marks on lower layers

[@katejohnson7019]

I'm doing a cotton apron. Should I prewash/ shrink it first?

[@mayravega6481]

Thank you so much ❤️

[@karenmckenzie8465]

Amazing thank you.

[@user-fz7ms9ds6y]

Very helpful and an easy watch. I always use you guys when purchasing my svg files. I am wondering are there certain days of the week that you upload free designs? Or is it just at random? I feel there is only camping designs that are the newest. Wondering if we could switch it up to Halloween or Fall? Thanks for all the free designs. Eagerly waiting to see what’s next. Hope you all know how amazing you are! Have a great day! ☀️

[@DesignBundles]

Free designs are normally released on Fridays!

[@PateKimberly]

Thank you!

[@DesignBundles]

Thank you for watching Kimberly! -Becky

[@EllaRoseOji]

You explained this process very well! Thank you.

[@DesignBundles]

Thank you so much !

[@genettebrumley969]

Hey Becky I have queation! Can u put criuit glitter iron vinyl on a 100% plush velvet. I need your help please and if so do u have a tutorial of it.

[@ChaunaCasteel]

Becky, do you have a layering tutorial for the Silhouette?

[@DesignBundles]

Hi Chauna! Yes, we have a tutorial here for you: kzbin.info/www/bejne/faO5Z39olt-DfqM - Dawn 😊

[@qeva_]

Thanks a lot

[@DesignBundles]

You are welcome, thanks for watching! -Becky

[@ishmorris9888]

How did you bring all the layers into design space like that tho? Was it a vector?

[@karenkatuls9995]

I’m so glad I came across this video. Your explanation was awesome!

[@83LaDollyVita]

I love your shirt!! 🖤

[@DesignBundles]

Yay, thank you! :)

[@mfprice45]

How well does this hold up on a tshirt?

[@tatianaquintero4355]

Hi! Great video, Just curious did you have your circuit design space on a laptop, desktop, or tablet? I want to make sure I buy the right computer to fully use the design space. I want to try to layer on 3 colors an only 2 will be on top of each other so this video is perfect. Thank you!

[@DesignBundles]

Hey Tatiana! I prefer to use a laptop for a mix of function and portability. Hope this helps! ---Becky

[@andreamikova7854]

C. Cc ok. LK

[@EVOxROCKS]

shrinkesh also happens when is really cold

[@wickiedamgaard5791]

The shirt you have on in the video, did you make that? and what materials did you use?

[@MAHWL]

how many layers can you layer? and can you layer a portion of a vinyl on vinyl and the rest onto the fabric or project?

[@kristenpark2450]

When I layer like this the layers not adhered to the shirt peel off after just a few washes. Any advice?

[@jacobsimpson347]

How can I make one of those files?

[@xxsecretdreamerzxx]

Are you using the highest temp the htv goes so you can do only short sec burst? Like if the vinyl temp is 305-320 for 15 secs, you do 330 for 5 secs or 305 for 5 secs?

[@DesignBundles]

Following Crystals advice I always check what is recommended by the producer and just do this temperature. It takes some trial and error because for say Siser easyweed I only do tack down for 2 seconds and for Cricut I found it needs 5 seconds to stick - Agata

[@jacobsimpson347]

Can I use cricut design space to my cameo?

[@DesignBundles]

Unfortunately not but the cameo does have silhouette studio

[@daisycakes101]

If I don’t have Teflon does parchment paper work too!

[@DesignBundles]

It sure does!

[@sandeebarndoordesignsstudi4254]

How the heck were you able to separate the colors from each other? Thanks.

[@DesignBundles]

Hey Sandee, I was able to just ungroup the design in the software before cutting. Hope this helps! ---Becky

[@loveforthegame915]

Teflon sheet...can I use butcher paper in place of this?

[@reviewsbymich]

Good tutorial though I wish you also had a silhouette software one!

[@DesignBundles]

It's on the list just for you Michelle! ---Becky

[@reviewsbymich]

@@DesignBundles oh thank you!!

[@melk.9425]

How many layers of vinyl can go on top of one another? I want to do a project but there’s about 7 colors all layered on top of one another. I’m new and don’t want to mess it up by making the vinyl too thick.

[@latashamcmican6748]

hi! so im new to everthing and ive been trying to watch different tutorials but i have one question, when layering how to you cut each piece all at once or seperatley ?

[@DesignBundles]

It depends on your cut area and the size of the pieces. You can put multiple different colors on your cutting mat (in different places) to cut at the same time. However many times you will need to load in the individual colored sheet on the mat, one at a time.