HOW TO LIFT YOUR TRUCK 2"-3" INCHES FOR FREE... With Basic Tools at Home!

[@TheWotteringHole]

*Get's rear ended once* Now I gotta make sure i'm high enough that the car will pass underneath me and hit the car in front of me.

[@jamesrichard448]

That would actually be pretty hilarious 😂😂😂

[@tacticalnite6184]

Lmfao

[@tylerotero4285]

I would love to see that

[@connorunruh6573]

Better be a lifted Honda Civic

[@fear_dies_i_dont]

Like in Tom an jerry where they’re in the space station and the robot Tom extends his legs and raises upwards.

[@turtlemotonation]

13:10 for lift, you're welcome!

[@adventureusa6049]

Thanks buddy

[@texanerection492]

Thanks😂

[@heckyeah3537]

thanks bro

[@mr.dr3161]

👍

[@ronkush69]

Thanks bro

[@jaskanwarrandhawa6577]

cut out the rust hole and have the exhaust come out from there

[@yitzhakbahar7408]

That's a sick idea

[@dhruvpahwa5724]

That would be sick

[@garrettbigbear7299]

Agreed.

[@4dak88]

no actually he should cut out the exhaust and re run the pipe to go inside the cabin from underneath the floor from a hole, i'm sure mike would love the smell and taste of that while he drives, seeing as he is a car guy and all haha

[@johnranieri7247]

Right through the frame? Or under the frame then back up to hole? Lol

[@yesimbigwes]

My security system has 30 rounds of .223 in the magazine

[@bestrustfarmer3003]

Facts lmao i died when i seen tht

[@FastLanePros]

I got the 40 cal plan lol

[@No-km6zr]

I’ve got the 9mm plan, I love it!

[@StreetSpeed717]

That's for after the security system warns you there's a problem ;)

[@yesimbigwes]

Street Speed 717 ahh ok maybe I should buy that security system and say you sent me 😂

[@toybox5576]

You can always count on Mike to be your last KZbin notification of the day.

[@megacharzard10gameing79]

Right

[@cohendeweese3942]

It’s always my time for bed video video

[@loganjohnson4645]

ToyBox Car Club so true 😂👌

[@v8extreme]

Yeah I am loving working on the west coast LA area from NC uploads come in right at three hours earlier! LOL

[@ussindianapolis9137]

Yep

[@fordsmobile1672]

I get my home security from Smith and Wesson

[@FastLanePros]

Glock here😂

[@jakecook8354]

12ga 00 here

[@wyattmac9701]

@@jakecook8354 12 gauge slugs here

[@406Steven]

German Shepherd alarm with FN PS90 physical security, 50 round deployment teams of T6Bs.

[@ExRev79]

Secret Services got my back...or well maybe its just a guy in a black van

[@drewmaples5172]

Every kid 16-19 cutting the exhaust off their cars because of you mike 😂😂

[@nicholaspap7197]

drew maples I did it to mine first lol then put hollowed out glass packs under it and a diesel tip lol 😂

[@boostedkidproductions9719]

I cut my muffler and got a borla welded on

[@infernotogo8133]

I'm going to cut off the exhaust off my Honda then put a butterfly valve that way I can still have a stock exhaust but it can be loud if I want to

[@benvicks]

My brother in law convinced me too a couple months back 😂 it was worth it honestly to broke to get anything ran right now parents won’t pay for it and I’m in high school lol

[@anthonytomb8857]

i live in commiefornia so i cant

[@AliYassinToma]

2:53 to skip the ad

[@BERTRAND85O]

SEMA ready painting over the rust

[@greenbean9385]

So true😂😂

[@towlife270]

Your supposed to jack up the front end of the vehicle before messing with the torsion bolts to keep from stripping them out or breaking them.

[@paul_omalley]

What ever happened to continuing the wall of license plates?!

[@StreetSpeed717]

I still have em! Need to get them up

[@alonzohall9561]

The old apartment... you mean where you had the license plate wall?!?!? Bring it back!!!!!!

[@ismailhossing7697]

Alonzo Hall

[@chasejones3456]

The rear ending he received inspired him to lift himself to new heights. Psalm 717. 😂😂😂😂😂

[@joshuagooden4212]

That's what I call a 20 foot paint job. From 20 feet away it looks great. Can't wait to see a lift kit and put better tires on it

[@FixItNick]

Would be sweet to make it into a Baja Style prerunner long travel suspension Raptor Killer!!

[@johnranieri7247]

Yeah that fits the cheap build theme.. roflmao Go to a pro prerunner channel to watch real mechanics do those kind of skilled builds

[@FixItNick]

John Ranieri long travel suspension is not hard to install it would be epic to get all the 717 crew back together and three stooges their way through the build, don’t we miss those days?? Lol

[@budtackett8347]

max vids can get his ranger

[@SDRacing88]

not many LT kits for the obs. I say sfa, quicker and cheaper.

[@MaRCoS-pl7ht]

FixItNick I literally said this on the first vid when he bought the truck

[@DukeDevildude]

Wood block body spacers sound sketchy but my dad used to have only a wood spacer kit on his blazer and it worked really well for clearance. He ran 37s without rubbing by buying a 2x4 from lowes. Also its CHEAP.

[@billydunlap4707]

Just don’t spend more on wheels than what you bought the vehicle for😂

[@WopJr]

Bluefox 336 but some sick wheels would be better. Plus he could always just throw them on the Duramax after 😂 even tho I love the wheels the Duramax has

[@santo2831]

I bought one off a family member for $400 so i guess im not getting wheels

[@bonzainews]

I think he finally figured out that people like to see projects that they can afford...

[@hwdcfox]

@@WopJr The Duramax has 8 lug wheels and the Blazer/Tahoe has 6 lug...so he couldn't use them for the Duramax.

[@Weeeeefox]

@@WopJr you can't just put 6 lug rims on an 8 lug truck. You can buy a spacer adapter but that's silly

[@killintimeracing1368]

Crazy how a $1500 blazer can bring way more views than a McLaren.

[@tl5108]

More relatable for more people

[@jungleforeva]

That’s because nobody cares about a McLaren.

[@lilgater1234]

HELL YA BROTHER YOUR ON THE CLE.... wait wrong channel Hey buddy I ment

[@Jack-b5o6r]

david The awesome 😂

[@jasoncarter251]

TWIN TURBSKIES

[@Bentson24v]

BARTLE SKEET🍻

[@jasoncarter251]

FULL PULL

[@Bentson24v]

JAMES GET THE BOTTLE!

[@dakotasmith1746]

I gotta say I love this so much.. i have a 92 full size blazer (way better condition 91k on odo) and its fun seeing what you can do to these bad boys. Specially cause these videos may spark a new idea for me with my blazer!

[@TheGearShots]

I was super shocked today when I thought an Equinox was in front of me at a red light and it said BLAZER

[@Tony__Tone]

Exactly 🤣

[@klassenkustoms9932]

That’s an insult the the equinox 😂

[@keaganguiley7285]

It was an early trail blazer

[@keaganguiley7285]

Not an equanox

[@youtubeaddict437]

They're the same thing anyways...

[@steve-ostandupe7608]

I found your videos and recognized you bc Ive trick-or-treated in your neighborhood. (Im not a creeper. You wont need the security system for me. Lol. It was just neat to see and recognize the area.) Love the vehicles. I like how you DIY many of your mods. Ive been modifying my Ram 1500. I debadged, added a magnaflow exhaust, new cool air intake (tweaked where air enters it) , high performance ignition coils, added camo racing stripes, new rims and all terrain tires, cab spoiler, airtabs, 30” LED bar, and just ordered a new front grille. Its addictive!!!

[@Jack-b5o6r]

Here for the best 1500 investment you ever made SS717

[@elijahmaurer9039]

Considering his background is finance that's unlikely, also, his gopro was probably his best investment

[@BigSalP]

Hey Mike, have you ever heard the expression that a little knowledge is dangerous? Well that saying fits this video perfectly. Let's start with the exhaust. You should never vent your exhaust under a vehicle for a reason. The carbon monoxide fumes can rise up through the floor and dangerously fill the cab.... But you will probably be OK and not run into any issues with that... Now for the suspension. The worst thing you could ever have done was touch those keys. The stock keys are not meant to raise the truck that much. You will destroy the ride characteristics of the vehicle and it will ride extremely harsh. The way you did it was wrong too. You are supposed to put the truck on a lift or use a jack to raise the wheels off the ground to relieve tension on those torsion bars before you start cranking on those bolts. You could have easily stripped the threads and caused yourself a very big headache. You are also supposed to count the revolutions of the bolt and make the same amount of turns on each side to keep it level. You should do a little at a time and then drive the truck a bit to let the torsion bars settle in. There is a limit to how far you can raise the front end, especially on a GM truck. You will notice on some GM trucks, under the upper control arms there is a bump stop that is part of the upper control arm that limits the down travel of the upper control arm. The more you raise the front of the truck, the steeper the upper control arm angles downward, and the closer the control arm gets to the bump stop. if you do not leave enough room between the bump stops your truck will ride like a solid brick. At the very minimum you should be able to get your thumb inbetween the bottom of the upper control arm and the bump stop. Do not decrease that space any less. This way you will still have enough travel to give you a halfway decent ride. While you can decrease this distance even more to lift the truck higher, your ride quality will suffer dramatically. Like I said above, Always do a little at a time and with the wheels raised off the ground. Then measure, adjust, cycle the suspension by driving it, then measure again and repeat until you achieve the max ride height you want while still keeping it level side to side. You will probably notice that even after you are done that over time the suspension will settle even more and you may need to make minor adjustments. One last thing and this is extremely important... Keep a very close eye on all your suspension parts for wear. Especially your half shafts, your ball joints and your wheel bearing... In a regular car it is much easier to detect from driving if these parts are worn. But with large trucks like these it can be very difficult to tell that these parts are worn by just driving. You will need to visually and manually inspect the parts to make sure they are secure and safe to drive. I have seen wheels ready to fall off a truck and the owner either had no clue or only minor indication that something was wrong. And these were people with basic mechanical skills like yourself. If you must, the best way to lift these trucks is by using a good brand name kit that comes with aftermarket control arms to keep the suspension geometry as close to neutral as possible. Good luck, and stay safe.

[@harryconley9557]

Wow my English teacher read this an said this was a 10/10 paper man

[@jwolfe8411]

You sound fun to hang out with.

[@mauricepatterson2901]

He wrong cause I got a GMC yukon and I did the same

[@adamkasper7866]

Hell yeah man I'm really liking this series I'm in highschool and this is giving me some ideas.

[@orangehigh0355]

Me to I want my frist car to be the 1986 blazer

[@nickgg]

I get my license in 2 months and I just bought a 94 gmc stepside

[@garrettbigbear7299]

Kids dont run straight pipes. Shits annoying and sounds horrible. Lol

[@willvaughan5734]

Garrett BigBear it sounds great, what you mean man😂 everything I got is straight piped or has an aftermarket exhaust on it though so that’s my style I guess

[@yo-ge5xm]

Will Vaughan yeah I got an 04 ram and the first thing I did to it was put on a flowmaster 40 series. I actually like the drone in the cab idk why everyone hates it

[@scottydntno]

Skip to 16:00 the first half has NOTHING to do with the lift. thumbs down.

[@miles3521]

MAKE IT BUDGET BUILD THEN RE BUILD IT UN BUDGET

[@StreetSpeed717]

That's what i'm thinkin...

[@WopJr]

Street Speed 717 great idea

[@jacobmoyer8848]

I agree

[@paulhargrave9762]

I agree

[@willvaughan5734]

Street Speed 717 eventually I’d live to see it on a 6” lift and some 35” boggers just because old school😎 it would be sick as hell.

[@motomaxwell4921]

Thats the best sounding V6 i've ever seen

[@Skittlesthefocus]

I love how it went from you trying to take off the valiance properly to you"re saws-all haha

[@tonyp.3683]

I’ve had a SimpliSafe system for 5 years. Love it.

[@SUBI_PaT]

The binford t-shirt is on point

[@superdwarf]

Actually laughed out loud when you took the whole ass piece of wood and started pounding on it 😂. I fully approve of your tactics

[@joecarosella4001]

if mike didn’t sell the “old” duramax wheels he needs to get those on

[@StreetSpeed717]

8 lug sadly buddy-

[@alexyoungberg5232]

@@StreetSpeed717 so many nice 6 lug wheel and tire setups on fb marketplace bro. You could probably find some nice newer silverado wheels for cheap

[@trevorharris7586]

Adaptors

[@clellont2723]

Adapters mike adapters this is a cheap truck project what’s cheaper than adapters and used wheels

[@Weeeeefox]

@@StreetSpeed717 In my opinion you should just buy a rough country 3 inch kit it's still up there on a low budget

[@TylerDClott]

Mike, you should run that exhaust either out the back or out the side on an SUV. I know you’re a smart guy, but you really don’t want exhaust gases in your cabin. I’m excited to see the rest of this build.

[@ginosanchez1569]

Make sure to order a spacer for the rear so it can stick out as much as the front because those years the front stick out like 1 inch or more then the rear

[@patrickblissmusic]

Holy crap...the info you're looking for is at 17:00. You're welcome.

[@charlesjones32787]

This is totally the way i do everything...half assing it for life

[@bucketmouthinc82]

My favorite vehicle I’ve ever owned was my old 2 door “00”Tahoe Z71. It had the vortec 5.7L, 6” lift on 35’s. I added some headers and true duals with race series flow masters. It was so reliable and fun.

[@WelcomeToTheMadness]

Exhaust was installed by a KZbin mechanic. Zip ties, I'm surprised I didn't see any duct tape anywhere. Crackles and pops, no tune required!

[@isaiahwilliams7894]

I was surprised to hear crackles and pops from the truck!

[@NeilEAnlin]

Those down tips are gonna make a big difference. I'm so excited about this.....it's taking me back to High School when a lifted 90's Chevy was the shit!!

[@cutemlooseoutdoors6509]

Thank you mike for doing a build like this my first truck was 94 z71 biggest POS ever but I loved it. It just gives us kids something to relate to because some of us may drive something like that forever and never get to own a McLaren or a Duramax!!!

[@47-TH4TS-R4VN]

This channel content got sweet! Right up my alley 99 k1500 came with 2 in lift and sweet rims n tires

[@TronApostle]

This series is awesome. Thank you Mike for making content that’s super relatable and easy to do!

[@aaronkeehn9990]

Mike i'm glad you took my advice so that no exhaust get's inside the truck,your welcome.

[@No-km6zr]

“Oh yeah, that one we might have to.... well??....” *cuts to mike beating the shit out of it*

[@mclarenjohnf1]

Mike if in doubt using the perfect tool for most jobs a FBH.

[@kyleroconnor3316]

Him and stradman getting that simpli safe ad on the same day

[@jefrey5578]

GM sure does make the best truck for years 1995-2004.

[@desertdieselgang7985]

Drives out of garage breaks teeth on first bump

[@ED--wh8zt]

Lol, we both have clearly tried this !

[@EASTSIDE-313]

Don't forget how fucked the alignment is now lol

[@brandons2336]

I bought my truck like that . Much better once I lowered it again

[@grindersandgears3445]

Seeing you have fun with the Tahoe was the final straw that made me give in to buying a bigger truck. I've been thinking about going bigger for a while now. I love my little S10 Blazer, but I finally came to the conclusion there was just no getting around the fact that I couldn't make it what I wanted it to be even if I threw money at it. Even a v8 swap would have been a pain in the ass, possible, but a big project, and it still wouldn't have been ideal for towing with it's size, weight, axles, and brakes. I just bought a 97 Suburban "1500" 6.5TD, it's a beast, the S10 Blazer looks tiny next to it, especially from the front.

[@eag8999]

Dentside Ford Bronco project? That truck will triple in value in the next 5 years.

[@karlhopkins713]

Looked like an f250 not a bronco

[@eag8999]

@@karlhopkins713 I didn't say it was a bronco. Just that that generation Bronco would make a fantastic investment. Though Mike would ruin it with some 16" wide 33s lol. Mike is actually Mexican guys.

[@archerjames2011]

You're supposed to drive it after messing with the bars to settle them it actually raise another half inch or more after driving it

[@bryandevries7210]

If they don't find you handsome, at least they'll find you handy- Red Green

[@petecolone5125]

"If u stand back and squint your eyes just right the rust is gone". Nice to c u get your hands dirty. Love all the videos kid!

[@jonzidek1218]

Cranking the keys is gonna make it ride like a brick

[@blakeok952]

I know

[@EASTSIDE-313]

And fuck the alignment right up LMAO

[@shortedtoground]

I cant wait to see what it looks like with the bigger tires! Nice looking truck!

[@chasesmith4222]

tazer blazer for the win 🇺🇸🇺🇸🇺🇸

[@Connor_estes69]

Chase Smith 💯

[@conrad463]

Don't rule out sport host Jay Blazer. Get Shane to wrap Jay Glazer on it.

[@ijmodified]

This is Laser, blazer, tazer, gazer, fazer, kazer we go by the purple cobras "you made me bleed my owe blood!"

[@JeffLyle]

All these other shops make it look so hard to fix rust... I like your method best!

[@cameronberschauer]

You should always have the vehicle off the ground when working with the Torsion bar I personally had the bolt snap from to much pressure and the bar came down and slammed into my elbow resulting in a fractured elbow.

[@justinvanwijk716]

Thanks for the heads up

[@mr.bean_btw5076]

Noted

[@GTFab]

Mike, for bigger tires for cheap and with good CV angles, consider cutout flares or an "extra large fender mod" (cut a pie shaped section from behind the wheel opening, bend back and weld).

[@alexsanchez9366]

A 20:00 minute video y’all ready know mike has some fire content when it’s a 20 minute video

[@jdkirane7990]

I did that to my truck in high school but went up 3.5 inches😂 6 months later I was redoing half the front end. Sway bar end links, CV angles, all the good stuff

[@Kevinh23111]

You should of made the exhaust pipes come out of the rust hole

[@ismailhossing7697]

Kevin H

[@jonstobbs4587]

You can fit 285/75R16 tires under it without any lift. I've had them on my '99 K5 for 10+ years. Might just have to crank the bars up a bit. They'll give you a meaner look with them being tucked into the wheel wells and plenty of ground clearance for normal off roading

[@alvinfink589]

If the wood and hammer don't work, just hit it with the wood. 🤣🤣🤣

[@kerrybarber9930]

I guess you probably need all the extra inches you can get mike

[@XBanditXcess]

Mike is so proud of the price he paid for the truck that he put the price on the badges on the side of the truck

[@lukerogers4925]

Jorge Almaguer nice

[@TheUniversalVince]

"We're going to measure and see how much we can get it up" - Mike 2019

[@nicholaspap7197]

I paid 1400 bucks for my high miliage 1996 z71 and I have had the most fun with it best money Ive ever spent ..she will go anywhere I put it

[@douglaswhitfield9111]

Ive heard that you need to jack the truck up to safely adjust those bolts as you could snap them, is that right?

[@hunterdude24]

Douglas Whitfield yes. That’s definitely safer than what he did. The bolts could snap, or the weight of the truck could snap something in the suspension setup if the weight is on the bars while cranking them. Super sketchy what he did. Do not recommend. Jack stands on the frame always.

[@Immoral23]

Not to mention they turn so much easier when there's no load on them.

[@jjrock5]

Douglas Whitfield yes it’s true

[@EASTSIDE-313]

Don't forget how fucked up ur alignment is when ur done LMAO

[@markmorgan5197]

EAST SIDE313 mine are maxed in my 01 2500hd and the alignment is still perfect plus I’m now able to run 35s with out rubbing any

[@JP_EX003]

Awsome now i can do that to my project truck as well.

[@strangekreations299]

Jack the truck up next time you turn the torsion keys,be alot easier,won't fight it as much

[@EASTSIDE-313]

Too bad the alignment will be fucked when ur done lol genius..

[@HAFAT86]

I think this is the 3rd video in a row you used the word “Janky”!! I’ve never heard that word before you said it. Now I’m pretty sure I’m gonna day it all the time cuz it’s in my head now!! Lol

[@mikepoint4983]

Beater 717 channel . The Dakota sounds better than your buddies Craptor . 👍🏼

[@melvinramos1955]

Great vid bro!!! this all I needed for my trucks look

[@LarsonChase01]

Get ready for the comment section to get filled with people crying about how its not a truck, or its not a blazer.

[@WopJr]

Chase Larson I haven’t seen one comment doing that, only comments like this

[@LarsonChase01]

@@WopJr well, I guess they finally figured out that Mike wasn't going to let it go, so they gave up.

[@JustTyIer]

had a 98 silverado that had cranked keys and 33. The front end on that thing is about to be suuuuuuper stiff. Lift keys get the same lift but doesnt make the front near as stiff. Definitely will be able to fit wide 33s now. Watching this makes me miss my truck so bad :((

[@LandonWilks]

A sawzaw in mikes hand is dangerous!!😂

[@leftlanekr2295]

Landon Wilks please god don’t let him get to a Honda 😂😂😂😂

[@tracewallace23]

I'm waiting for Mike to see an old blazer with the top off and "get an idea" 🤣🤣😎

[@LandonWilks]

KW T660 Please nooooo😂

[@LandonWilks]

Trace 23 And claim the roof “fell off in Mexico...”😂

[@tracewallace23]

@@LandonWilks LMAO, probably a low hanging cactus limb

[@ecarasig]

i was able to crank my front keys and add a two in block in the rear to fit 16x8 0 offset 285/75/R16's (basically a 33.) I just need to take off the bumper trim in the corners between the fender and bumper. They were rubbing on full lock. Once I took them off I had no rubbing on road driving or off road crawling. It was only under heavy suspension compression I got a little rubbage. I also added kyb shocks (2" longer) to make things stable. CHEAP AND AWESOME SETUP.

[@wesleytruax2469]

That Dakota sounds like the ford raptor lol

[@caseyblackburn6365]

Dakota sounds better

[@reidharris1059]

I got a 02 Tacoma 4 banger 5 speed 4wd regular cab w 227,857 miles on it and it still runs strong

[@cheesyfries6885]

put a 454SS grille on it

[@WilsonsGarage330]

Sophia Herrera yea baby good idea lol

[@M-.-Jones]

This is definitely my fav vehicle that you own now.

[@Bingbong872]

A real professional would've cover the hole with black duct tape, but that's none of my business...

[@keaganguiley7285]

Nah just need some spray foam and bondo

[@hankersonmedia6134]

If you have less than an inch difference in height between sides, check your tire pressure on both sides.

[@woffordsoverlandjourneys8618]

You're supposed to Jack the vehicle up first and then count the rotations

[@GearHead704]

Was kind of hoping you might mess with us and lower it, but I wouldn't have bet on it. Looks good!

[@JoshuaOverman]

Project Grizzly Wintergreen

[@karlwoles2064]

Love the Blazer, reminds me of driving in a field/snow with my parents beater, an old Chevy Tahoe. Mind this was the car I learned how to drive on.

[@Varedz]

Get a 6inch BDS lift i have a 6inch with a 3inch body zone on 37x13.50R17x9 toyo mts

[@braaaaapp2464]

I got a 92 k2500 single cab lifted 6 inches on 35s tbi life all 194 hp Haha but sounds like it's got more

[@Varedz]

@@braaaaapp2464 i have 6.6 LBZ duramax swap

[@Varedz]

How to get a new trans to went with a suncoast and kept the truck with a manual

[@KimchiTheRicecakke]

Its a 20ft car. Only looks great from 20ft away😂 excited for this series man!

[@jaken20]

simplisafe getting all the car youtubers.. *looks at stradman*

[@miguelgallegos8038]

Jake yeah but the stradman made almost a whole video of sponsorship plug

[@jaken20]

@@miguelgallegos8038 and for some reason i watched the entire thing haha.

[@FastLanePros]

Nah I use a 40 cal protected plan

[@jakeshvng]

Tavarish got hit too

[@406Steven]

@@jakeshvng I had a few car videos lined up to play and every single one of them was plugging Simpli Safe hard. Since Off the Ranch featured them months ago I figured I could skip the next minute or so, hit the dislike button, and keep AdBlock running.

[@shunsato6621]

I’m really glad that you enjoying this project because your enjoyment is totally reflected on your video that we all enjoy watching it genuinely dude! I really enjoyed it and thanks for sharing I think ima get a truck like yours for sure!

[@andrewwilliamson8538]

so is your lease up on the 720 or what?? and where the hell is the "grandpa vette"? Did you have to sell it due to lower views??

[@michaelcole7162]

Andrew Williamson if you follow the videos he said it was still in Texas getting built built over the winter as he can’t drive it nor store it there lol

[@gregdylewski3166]

thanks. I am curious to see what kind of tires you are putting on.

[@RFRacing717]

The bull dog cam!

[@nickdutter1245]

RFRacing 1v1 me in fort

[@stevenskoog]

That “ballsack” plate in the background @3:26 😂😂

[@anthonyholmes1984]

LED headlights would look amazing on the Blazer!!!

[@Randeezy45]

This is my dream truck im anxious to see this build.

[@jdc6927]

That Binford shirt.