How To Link Faders And Knobs To Your Midi Keyboard In FL Studio

[@michaelamanahu2134]

your the only one that has actually explained this shit everyone else just be acting stupid

[@anonymalias]

already found it out on myself earlier. One thing is new to me is that the FL is able remember the modulation. So thank you!

[@andrereid7752]

this man is a national treasure

[@maximize8078]

Holly Sht Do you know how long ive been searching for exactly how to do this!??? BRO now i can use my midi instrument! finally after 2 years of not being able to use it!!

[@OmoiSenpai]

Glad that I can help ^_^

[@maximize8078]

@@OmoiSenpai Thx so much

[@Beatsbymellow_]

This will help me a lot for live performances in fl studio Thanks a lot man🎉

[@ledifanamu]

exactly what i was hoping for 😅

[@bsbiker109]

you got the best content for this fl studio shit, and i never thought of connecting the knobs. I am happy i subscribed to you, its like a lesson everyday. you have great content your channel will blow up keep up the good work

[@OmoiSenpai]

I'm glad you like it and benefit from it! ^_^ Thanks for watching and sticking along! Trust me next week I'mma be able to kick myself up to be able to make videos like every day ( except Sunday maybe )

[@886Beatz]

Do you know why it can't work with the FPC! I mean for each individual pad's pitch knob?

[@OmoiSenpai]

It's probably a different Midi CC each time. So you might have to adjust each pitch manually or something like that.

[@886Beatz]

Justin Omoi thanks man!

[@AmarnathTej]

U made my day bro ...I thought my knobs are fuckikg useless and literally going to depression but u are amazing ....Don't know how to thank but subscribed ur channel and share this channel to most of my music buddies to subscribed.... thanks a lot again

[@officialsylt]

But how to have the settings saved ? Like everytime I open fl studio I always have to re-map them. Anyway to have a setting to be saved and no need to re-map it ?

[@PatsiicK]

brooo i love you. ive just been using all my midis without the knobs and stuff forever lmaooooooooooo

[@OmoiSenpai]

I see ya! ^_^ The new age of using the knobs and stuff right changes TODAY!

[@lukelindenmuth6494]

after a year of having an akai mpk261 and fl12 finally found this video. Bless up

[@TimothyTCB]

you sir have made my life a billion times easier. thank you so much!

[@markraphaelmorales4427]

I tried but it says "You didn't tweak any control (!)"

[@pablomarrero6604]

same bro, did you solve it?

[@djmurcielagobeat]

So... you solved it??

[@patricknguyen5161]

Finally I've found a video like this. It really helped me a lot, so thank you very much! However I still have a few questions: - How do I assign the transport buttons (mine are not working, i habe a novation 61 sl mkii btw.)? - How can you use e.g. knobs to scroll through patterns and tracks? - When you're in the mixer, how do you control more than 9 mixer channels (e.g. from 10-19) if you only have 9 faders? I'd be very grateful if you could help me. Have an awesome day!

[@75hilmar]

This was quite helpful since these informations showed me a lot concerning work flow in FL Studio. I was wondering if you could set up multiple banks of assignment to quickly switch between many different functions. So I have the same question as the poster above me

[@kizkrash4164]

Ik this is old, but I’ve done everything you said, and yet, it still seems to not work. When I tweek the knob after selecting multilink, and after pressing over ride generic link, when I twist the knob on my controller, the knob on screen just instantly goes down or up, there’s no control

[@Kryptospotted]

Am I missing something? How did you get to that screen to change the faders?

[@amanbeniwal8668]

Would we have to link the faders and knobs again if we close fl studio and start a new project?

[@SammyCinatra]

if u override generic links no

[@88xyzzyx]

Hi! maybe you can help me with small problem. I have midi controller notation impulse 61 and I know how to link the knobs and faders in FL Studio but my issue is: When I’ve linked some knobs in some VSTi and use the same knobs in different VSTi and for example in one window I will set one knob on 50% ‘volume’ and then I will jump into second window with other VSTi and touch the same knob to control that the value jumping straight up to 50% to the same position what I’ve been left on the other VSTi. Is there is any way to fix that? I’ve already looked into to both manuals fl and impulse and nothing found 😑

[@YoutubeparisnewsBlogspotFr]

Hi. I want RECORD MIDI NOTES within pattern when performance mode playing...it would be truly and finally real live looping. pleeeease !

[@francescoromano]

Would this be possible for assigning octave changes on a midi keyboard? I can't seem to find an answer anywhere!

[@egzon44]

saved my life bro thank u fr

[@dop3boii6o4]

Axiom gen 2 is actually on the list of Fl studio list for keyboard.

[@mrshorty7]

Do you know if there is any way of using the faders on the next channels (e.g. channel 10, channel 11 etc) just like there are arrows to use the piano keys octaves up or down?

[@ledifanamu]

Awesome video bro

[@OmoiSenpai]

Thanks :D

[@naashimdovi2272]

Very helpful ...can you do for Ableton please

[@daneguitarist1]

hey man, thanks I literally just got a midi keyboard and this helped out. ive learned a lot from you in the past as well, im a composer thanks for the great stuff man

[@OmoiSenpai]

Ah. Composer ^_^ That is cool! Not a lot of people are composing on sheet music lately. Feels good to see a lot of peeps are still keeping it alive!

[@daneguitarist1]

Justin Omoi haha, i definitely dont use sheet music nor i can i read sheet music like.. i compose for film haha

[@TheIguipop]

Bro I love you so much. This just saved my life

[@theradicalradish5791]

fr the most helpful video for me

[@Pepperoni290]

Perfect video couldnt have done it any better love you man

[@sarthaktrivedi1415]

Thanks, But can anyone help me with assigning knobs to multiple instances of same library in kontakt (Having same CC's and different channels and ports in BRSO Articulate)?

[@breznotraphouse3191]

Man this really helped me so much !!!! thank you

[@StevieNickXX]

This is a gem, good shit

[@ajoizainal]

Thanks! very helpful!

[@tenkin5105]

I'm trying to link fruity scratcher to the modulation or pitch knob (because I think it may be easier to make a more "natural" performance with the knob than a mouse) but the way you show it doesn't seem to work with the scratcher. My midi keyboard is a keystation 49. Could you explain or show how to proceed?

[@blackhole-oy2xd]

dashies brother

[@cancio157]

Thank you this was very helpful. I forget how stuff suppose to work sometimes

[@angelocast]

Thank you so much, Justin, here mastering the FL and midi keys! One question: I use key lab essential 49, I just started to map the faders and also have a MASTER fader. So I link to the controller, IT WORKS! BUUUUTTTT when I move the fader on the keyboard... is not showing the movement on the DAW. The sound goes up or down, all great. But doesn't show it moves. Weird. Another thing, it affects the overall sound perception. If I have my midi key master fader in 100%, but in the DAW is at 50%, will listen to a lower volume. Does not shows the real value. Any suggestions welcome. is a little weird, but anyway..will keep trying to find the way!

[@OmoiSenpai]

Hey! If you've linked the Mixer's Fader with the keyboard's fader, it should show up as movement in the Mixer window. This new Update for FL Studio has quite some bugs in it. That could be the reason why at the moment. Just make sure that you are linking the Fader volume, and not the sample's volume. Just in case! :P For the 2nd Question, If the fader on the keyboard is set to 100 ( all the way up ) while the loaded project shows 50 ( last point before saving) It will stay at 50% until you move the fader around. I believe that if the faders were "motorized faders," the faders on the keyboard/ device would automatically snap into the right places. Along with that, there is 2 "master volume" values within FL Studio. One Located at the top, near the "master pitch" knob. It is a knob. Adjusting that knob WILL NOT EFFECT THE FINAL EXPORT. The only difference is the level that you'll be listening to the whole project with. This is something ideal for those who do not have easy access to their headphone amp (or don't like to adjust them over and over) The Second One is located in the Mixer Window. Adjusting that one WILL adjust the final outcome of the song. I hope this helps! ^_^

[@davebeats2073]

Hellyeah buddie! Subscribed!°!

[@norfsyq9660]

Any time I try to link a dial on my midi to a setting in FL studio it just turns everything up to 100 without letting me adjust it is there a way to fix this?

[@santiagomarquez]

Hi! Do you have any video about mapping the channel rack to the controller (specifically drumpads)? I have been trying to map for example a Kick from the channel rack with the first pad of my drum pad, snare with the second pad and so on but is not letting me, only works with FPC but is not the way I would like to make it, can you help me please? I am triying to map a Nord Drum 3p and a Novation launchkey MK2 49. Would be great If you can help me with this. I´m going crazy. :/

[@OmoiSenpai]

Hey! Yeah for sure I can actually make a video on that if anything! But pretty much, you would have to add a Layer into the Channel Rack. Set the different sounds in the channel rack as children in the Layer. And set the Zone of the sounds so that each of them are on a key of your choice. I'll make a video on this for you some time on Sunday, or maybe even Saturday if I have the time!

[@unnimusic007]

can you please explaine me how to link a transport controller to that of fl studio

[@tinchojacobsen]

I have a problem, when I exit the fl studio and open it again, the software does not detect the knobs and faders, why is that? It's all good until I restart fl, then I have to set up all over again. Please help.

[@christopherdarapper5487]

how to do key bind mute solo and record though ?

[@gargolanecro]

i work with different vst, how do you change between them with the keyboard? my keyboard its not a midi controller, its a regular keyboard used like a midi, it only has buttons to change instruments, and when i play live i dont want to change it with the mouse

[@omarelkholy9303]

Can we link solo/mute buttons from the mixer ?

[@mcdayveed_]

After one links a knob or fader to their conroller, let's say you wanted to unlink a fader or knob from a particular insert, is it possible?

[@ispablito]

..I just got a NEKTAR keyboard, why when I play the keys on it the velocity is not good ,when I press it hard the volume is loud and when I press it slow the volume is low??

[@OmoiSenpai]

That is what's called weighted keys. The Velocity ( speed of hitting the note ) is what controls the strength of the sound. If you play softly/ slowly, the notes will record with a low velocity. Very great to perform what you record.

[@_notducky]

omg this helped so much

[@OmoiSenpai]

Thanks for watching! I am glad it helped! =]

[@nicholasbrown9785]

I'm using a QuNeo controller and when I link fader/ knobs to sliders in my controller, it will stay in the down position and when I move the slider slightly it jumps up to full volume, then back to the bottom when I take my hand off it any suggestions? mapping formula maybe?

[@nonametrackz7887]

Hey Bro I Was Linking My Midi To a Attack Knob on a VST but during the process i accidentally pressed one of the keyboard keys . now that key controls all attacks on each plugin , is there any way to undo this?

[@Emit_The_Great]

Great video man it was very helpful !!! Keep up the good work 👍

[@thecyclopsguy4106]

I read that FL has a mode called pickup (same as abletons soft midi takeover) does anyone know how to enable that setting?

[@bugsdoeproductions4265]

I have a quick question. When you link faders on your controller to Fl Studio mixer is it possible in any way to link the mute mixer track light to the buttons under the faders on my controller?

[@OmoiSenpai]

I don't believe that you are able to link the Mute/Solo buttons. You can link a mute effect in the insert and perhaps activate that if anything. Or Latch the Fader.

[@daniels7657]

how can I link the playbutton?

[@charlesdubroots817]

Thanks mate! Very simple and handy!!!!

[@westsidevicious]

Love your vibe had to sub

[@djdippa1]

Sick, so clean, clear and helpful, cheers G

[@sribal5111]

What midi keyboard do you use , can you suggest some good and in budget midi keyboards pleaseeeeeee

[@LEVRAN]

man when i tweak my knobs it works but it trhows me to inserts 60 plus why it says i linked it to insert 1 what should i do

[@IdolizeNoOne]

Really good video Straight to the point

[@franktaku9121]

So this applies to any midi keyboard correct? I'm getting an Arturia minilab mk2

[@ripsandyjlopez8328]

Franktaku yup

[@surendranshanmugam4446]

bro love you this helped me a lot .!!!!!

[@these63]

I understood the fader part but How do I assign fl studio transport panel from my midi keyboard? Thanks.

[@OmoiSenpai]

Hey! If you go into your Midi Option, under the output ( bottom half of the window ) Click on your keyboard, and under the keyboard type option ( where it should say generic controller ) Click it, and find your brand keyboard. It doesn't have to be the exact keyboard model. But click on that, close the window, and test the transport tools out. If it doesn't work after scrolling through the keyboard types, you may have to look into your keyboard's manual under the Midi CC Area to see how to set those up accordingly.

[@eoyuridj]

i am brazilian and you help a lot! Tank you bro!

[@rolkess]

Hay Justin, I recently activated the "link to controller function in my mixer(FL 12). Whats happening is that after a minute in my project the volume drops atomically. looking at it in the mixer, at the same point , the master made will drop. How can i undo.. Im clicking the dame thing but it dissent deactivate link

[@whiteguy7597]

WHAT UPPP ITS DAASHIIIEE!!!

[@francisflores35]

I messed up linking my faders. Is there a way to reset everything? Thank you.

[@TheRealCalijokes01]

Got to The controller tabs to delete on left Collum

[@gunbrawlog5469]

Yo justin how do u get the drums, snares and claps to play on different pads on the midi keyboard

[@OmoiSenpai]

Hey! That has to do with using an MPC plugin in your music program. In FL Studio, there is one called FPC! Check that up! If you are wondering no how to map the notes to it, check the video I did on the Akai MPD232 since I believe I showed that there!

[@caehum]

Thanks so much, got my midi working instantly

[@nicholascartagena814]

Is their any way to bank or group the faders to use the faders more than 9 times? Example First 9 group A, Second 9 to group B ect.

[@OmoiSenpai]

To my knowledge, sadly not. If your keyboard has a bank strip, similar to a Behringer B-Control BCF2000, it can possibly work!

[@TheDude-vx6wn]

Awesome! Very helpful, thank you for posting! One issue I am facing is that when I link my MPK mini to FL Studio 20 the knobs will work but my external mouse (I have a Mac) will stop working. Any idea why/solution?

[@morinabeats]

You helped me a lot, thank you!!! =subbed

[@raquancosta6068]

hey Justin could u pls upload a vid tut for the performance mode on Fl studio something like how to setup ur devices to Performance mode. Thx for all the great tuts they helped me alot

[@jasonthomas2252]

Thanks bro.....this definitely helped out!!!!

[@paulaxa1]

dude i cant link arp paremeters from albino 3. For instance the arp speed (1/2, 1.16 and stuff). In ableton the can i dont know if it's fl problem or hte plugin itself, since it is pirated because u cant buy it anymore it is discontinued. Any idea?

[@OmoiSenpai]

Make an editor thumbnail on the vst. Then find the arp function and create an automation clip on it.

[@shyun800219]

dude you the best !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[@jaduuuhum9763]

This video really helped me ,thx bro

[@blackhollywoodbizness7269]

Why do I have to link the faders and knobs every time I log off and back on fl studio?????

[@gloryboyant]

Are auralex pads for studio monitors necessary? Do you know if it would really make a huge difference in the quality of the music if use them or no?

[@OmoiSenpai]

I was looking at those yesterday actually. What they will do will help reduce the rumbles from the monitor speakers. Apparently the rumble can mess with your hearing of the frequencies. For me. I just used the white foam padding that came with the speakers lol. Haven't tried the monitors without them on yet thou.

[@sadafkhan3821]

hy plss help me .. my midi not showing in midi settings? ? what can I do

[@OmoiSenpai]

Select the brand closest to what you have.

[@manjsinghmj]

Thank you so much justin, this is so helpful!!

[@OmoiSenpai]

You're welcome ^_^

[@prodbydramatic]

always been lazy to do this idk why I was thinking it was complicated. now im going midi crazy with all equipment thanks my ninja! @^_^@

[@OmoiSenpai]

No problem yo =P The time for being lazy is OVER!

[@tommyhili6805]

Hello. Do you know how to map the play, pause, direction, and record buttons. Thanks for any response.

[@OmoiSenpai]

Hey! Mapping the transport functions ( play stop loop rec etc ) has to deal with the CC Functions in your Midi Controller. The first thing to try however is to select a controller type in the Midi Options and see if that helps decide the transport tools functions. If none of the controller types worked, you will have to refer to your Keyboard's manual on the CC Functions for the Play Stop Rec Etc and have them enabled.

[@tommyhili6805]

Thanks man.

[@juicymaymeandmargodreamsqu434]

I'm a artist for mayme and Margo dream squad and this was verry helpful.

[@luisangelo77]

What if i wanted to switch patterns or vsts? How do i do that?

[@DjArabinho]

thanks bro and keep going

[@markdougherty9917]

what if nothing happens when you tweak the manual controls

[@hosenknopf1234]

so if you tweak a knob during Recording will it create an automation clip?

[@OmoiSenpai]

It will actually create what is known as an Event clip, which you will be able to convert into an Automation clip afterwards. I made a vid on that. search the channel for automation and you'll see it!

[@no0bbbb]

great video bud.

[@AlaBamaSlamaBeats]

everything worked out for me but when i close flstudio and load it back up, i click the mixer but it wont work so i have to link every time i close fl.. any suggestions?

[@OmoiSenpai]

Are you sure that you're using the Override generic link option?

[@AlaBamaSlamaBeats]

Justin Omoi no I didn't use that option lol I'm sure thats the source of the problem. thanks man!!

[@OmoiSenpai]

Alabama Slama No problem yo! ^_^

[@AlaBamaSlamaBeats]

Justin Omoi works perfect! thanks again man, your videos are great

[@OmoiSenpai]

Alabama Slama No problem yo ^_^

[@Rishikeshkatke]

hey bro thanks for this video

[@TheRealSonix]

This has been really helpfull, thanks a lot!

[@rocca717]

Thanks for this! now my arturia keylab 61 was well worth the money lol

[@tobedemaro2505]

how do you do it in fl studio 11 producer edition :( :( :(

[@fabio4805]

How do you record while using the knob?

[@OmoiSenpai]

You can record while adjusting the knobs by right clicking the record button at the top, and make sure that all the options are checked! once you do that, make sure your snap is off, and you're in a new playlist. Hit record, and adjust the knobs when you want to. In the end it should become an event, that you can convert into an Automation Clip. I made a video about that on my channel. search that up and you'll be set!

[@charlyperez6614]

Hey bro do you know how I can set my MIDI drum pads

[@OmoiSenpai]

In FL Studio using the FPC? There's an option in the FPC that says "map notes for entire bank" check that up!

[@nathanfitzfitzgerald7904]

whats the difference of fl studio 12 producers edition and fl studio signature edition

[@OmoiSenpai]

Signature bundle has some more plugins to work with, like Gross Beat. In Image Line's website, they show you a list of what each version has.

[@marcelwajar7487]

Hey Justin .. Can you please do a new Partynextdoor tutorial referencing some of the stuff his done on P3 like harmonic layering panning and the auto tune settings as well the constant filter type work done on his voice

[@jeez6635]

my pitch wheel and mod wheel dont work on fl. help please on how to fix this. i have a m audio keystation 49.

[@OmoiSenpai]

Did you select the right keyboard controller? If so, and it doesn't work still, see if it reads it in Fl Studio. If not, you will have to reset your Keyboard. Most keyboards have that function done by holding Octave + and - at the same time when powering up the keyboard. If that doesn't reset it, refer to your keyboard's manual on how to reset the keyboard, or how to activate the CC for pitch and mod wheels. Good luck with that!

[@jeez6635]

which keyboard controller would it be? There's no option for the keystation.

[@OmoiSenpai]

Jesus Zavala Pick one around the M Audio List. Test it out!

[@raudi42]

Thank you, man. That helped me a lot!!