How to load a label roll in a DYMO LabelWriter

This video was created by the DYMO helpdesk representatives to help you out. We hope you find it helpful! If you have questions or would like to learn more, visit www.dymo.com.

[@djeng420]

*Love the **Bestt.Digital** Label Printer! It was easy to set up and prints super fast which makes it so fun to use. I uproot to make Shipping labels but I’m having fun making sticker also!*

[@kirawedderburn]

Thank you DYMO. I just watched this to replace the labels in our machine for our school.

[@t76d777f6d]

I've noticed that there are three places you can insert the label, and only one works. If you look in you can see a black drum. Point the end of the label almost straight down and slide it between the drum and the front of the printer. Now push the button on the front. This works 100% of the time for me.

[@nightlady2001]

/thank you , video did not work for me, your tip did!!!!!!!!!!!!!!!!!!!!

[@blackbird0313]

Thank you!! This was the very important last step they don't tell you. Push the button on the front. I did not even realize this was a button. :(

[@renegademax]

Brilliant. Thanks.

[@sandranoel6496]

Thank you also for the tip to push the button, and I found I really had to press and hold for it to feed it through! Much obliged.

[@outletdastintasosasco]

Sou aqui do Brasil, estava desesperado pois um funcionario havia derrubado a impressora e não sabiamos consertar. Seu video nos salvou !

[@julianreischl]

How do you make sure the label gets transported to the start position?

[@user936]

Literally helping a customer over the phone parroting this video 🙄👍🏼

[@javonjabonsoaps1261]

Thanks so much for sharing. Very helpful step by step.

[@Marc.H99]

Thank you, this helped me today!

[@user936]

I just send this video to customers now.

[@melaniefodera7158]

Very helpful, thank you!

[@JasonTDolan]

How to reverse the label spool back inside? I pressed the front button and three blank labels came out. I want the motor to go in reverse so the labels go back onto the spool. How is that done?

[@VincentAu-un6nq]

Something DYMO can’t do. Sad

[@AllisLife]

My label writer just keeps trying to feed but won't actually suck in the labels. PLEASE HELP!!

[@536767676533766]

it s true what they say about blond woman ;) lol you really don't know it pfffff i am not gone tell it you figure it out girl

[@nerdygirljen]

Since a reload it won't line up correctly, prints in the middle of 2 labels & then feeds through like 3 more blank ones. Wastes so many labels & no matter how many times you reload it it keeps positioning the labels wrong, it tears off at wrong spot, prints at wrong spot, even if you manually place it in at the right tear position, what the actual fck?! I need this thing to work correctly again, I use it every day.

[@VincentAu-un6nq]

Same here. Actually the machine is pretty poorly designed and badly tested.

[@jasonyarzagaray64]

This piece of junk stops working after the first change of paper load. Tried all those troubleshooting guides that are available online, the thing still keeps giving me the same empty paper error.

[@HappyHedgeHog88]

how do i get the old label out of the labelwriter. You are only showing how to load, but not to uload a roll. My labelwriter won't release the old label roll.

[@dianalayseca4330]

Super! Thank you it was very helpful - I would have not have the confidence to do it without your guidence

[@jenwombatexcelsior]

Psst.....sell the replacement spools somewhere. Anywhere. I'm beggin ya!

[@meredithanderson975]

I can see where you feed the labels on the spool into the printer. It takes almost an hour to get it working again - lots of trial and error - when I load a new roll of labels.

[@ngovietduy]

works and looks wonderful

[@Bryan14220]

Does it Print Waterproof labels?

[@FirebrandF5]

can the 450 print out shipping labels for packages?

[@vibesreadthecards222]

Super helpful thank you!!

[@angelinah427]

Will this help with alignment issues?

[@pureacelllithiumbatteries9607]

my 550 keeps blinking after last sticker ?

[@margaretgoldie436]

Cleared my paper jam but now the blue light does not come on..........any ideas?

[@MrMrSaldana]

thank you,,for the people that like to see it done,,you da man !!!,,lol,

[@kimvanadelberg4299]

Can someone help me? My Dymo 4XL label printer keeps saying it's out of paper, but it isnt and it won't print..

[@SR-sx4uz]

Very helpful thanks

[@Jimbob-zv5zr]

Hmmmm it's best to turn it on before the last step so it takes the labels in to start position me thinks...

[@gayofpeace9618]

thank you soo much quick and to the point!

[@anjlndadark29]

Thank you!!!

[@TateBreswick]

Dymo printers no longer come with Software CDs.... all software must be downloaded.

[@russl6006]

You have to push a button, u didnt show that in the video

[@SkotJervis]

Thanks much!

[@01worldguy01]

my 400 just printed one label and there is message OUT OF PAPER ...what a joke

[@andreasjacovides4800]

Thank you

[@01worldguy01]

haha I do NOT have THE GUIDE ... what did they shipped to me ??!!??

[@mella8296]

This video would be better with sound

[@joegilbert5017]

thanks for nothing :)

[@TheWarieh]

I’ve been wanting to get a label printer for my small business for the longest time and finally pulled the trigger. I’m glad I did ! This machine is great kzbin.infoUgkxw55tQTywUAAOsbrlwxONZULry77sFF1Q and the blue/green color matches the rest of the accents in my office. My favorite part is how small the footprint is. It’s less than 1/4 the size of my regular printer.Set up was fairly easy. Seller will email you a link with video instructions Which I found to be more helpful than the written instructions. I use a Mac and had no issues. They even included an adaptor for USB to USB-c which is great because I’m always losing mine! I had a few issues getting the labels to print properly and wasted quite a few sheets. You need to play around with the settings to get everything adjusted just right. If you have the wrong settings, it’ll crop off the edges or feed through blank labels. These aren’t issues with the machine though, just user error.

[@karlykar21]

I cant even unscrew the plastic thing lol

[@j.davidsemple6988]

Just give it a pull !

[@theunknown4570]

I ENJOY wasting 5-7 blank labels everytime i reload. YEA. i am made of money. no problem.

[@xandror]

Next do a video on how to waste $170.00. Step one.. buy a Dymo LabelWriter. There is no step 2.

[@kussebekele750]

This has been the worst item I ever bought in my entire adult life. Most printer took me an 10 minutes to half an hour max to set up. For Dymo labelwriter 450, I spent five days flipping, watching KZbin video's and rereading the instruction. All this, it completely failed. I recommend no one to buy this piece of shit

[@jgratias]

Except I have to fight with it every time, it's such a piece of junk!