How to Lower a Lexus IS300 (On RS*R Lowering Springs)

[@buddhabeast3508]

I just got mine ,getting shipped ,will be calling you to set up an appointment. Great share 👍

[@BreakersStereo]

Awesome. Ok let us know!!

[@buddhabeast3508]

@@BreakersStereo Are you guys available on Saturday early as possible morning to do RSR springs for 2020is350? and please let me know what it will run me Thanks

[@chrissaffell668]

Great video, so many people removing so many unnecessary things

[@pituq129]

Very nice. So technically you can just change the spring to lower. I have a 2017 RX. Just got new set of wheels. Can I just change spring to lower ?

[@djsthemetereman]

Very clean, looks good

[@jourdan__]

What are the torquing specs for the suspension?

[@etherealwrld5617]

lmk

[@euripidesroques6648]

HI, great video, can this be used in IS 500?

[@RaulGarcia46]

Will the install be the same for an AWD with the f sport package? I heard mine had the electronic suspension and only the Lexus dealer was able to swap out the struts

[@N1sm0NIC]

You're only swapping the springs, not the strut. It should work just fine, just be careful with the electronic suspension (AVS)

[@88SILVERADO1]

Hi I have a stock 2018 IS 300 i want to level it out out. What do you recommend?

[@MrSlavic23]

Without parts how much should a job like this cost in labor? I'm looking to do my 2021 lexus es300h.

[@ramadonscamaro]

Thank you .

[@roymarin7995]

Nice set of wheels! What are they ?

[@bz3549]

How much does a job like that cost if I already have tyne coils?

[@MK3JU]

Followed your vid, but after installing, I noticed these like a knocking sound coming from my right side of my suspension. The car rides straight and all so I’m cutting down to me not installing the springs on the correct way, or something wasn’t installed correctly. You think you guys could give me an idea on what it is?

[@matthewpelayo4003]

Hey bro ever figure out what was the problem?

[@MK3JU]

@@matthewpelayo4003 top bolt for the strut assembly wasn’t in all the way 😂

[@Jn831h]

Is it the same thing on FWD Is200t?

[@ray4hunniddoe925]

I have a 2018 it’s my daily driver thinking of doing this same set up Do you recommend? Or is the ride to low?

[@crxsir69]

Will this springs work for a 2017 rc300 AWD?

[@Luvnap]

Are these super down or just down?

[@BreakersStereo]

Super downs

[@tinahaidara9642]

Can I use these on my IS 350 f sport 2022

[@BreakersStereo]

Yes

[@chardtkdog8340]

is this thesame thing to a 2015 Luxus i250?

[@BreakersStereo]

It takes the same parts and the install is very similar.

[@luismagana4912]

What's the drop in this?

[@rickysavala4316]

Got a question bro. I just lowered my 2015 is250 rwd and I installed the Down rsr springs and now it sits higher on rear right and lower on the rear left. Any suggestions??

[@kentpozorski8374]

I know this is late reply but my 2015 AWD250 does the same thing in factory springs. I haven’t tested my theory but I believe the gas tank is on the left rear side and I notice with a full tank the left rear side sits 3/4 of an inch lower. I replaced the shocks thinking the rear left was bad but have the same results.

[@jdmcivicsi90]

No alignment?

[@oscarrubiojeep1805]

Would it be the same for the nx300

[@BreakersStereo]

I don’t believe so. That’s a different vehicle all together.

[@etet4736]

I bought the Super Downs for my 2015 RC 350. No cambers needed just like in the video you did, correct?

[@fuckused7735]

Was the install bad? I just ordered some plan on doing myself

[@etet4736]

@@fuckused7735 I installed them on just the front and they are so good. Evened out the car on 20's 10.5 on rear and 9.5 on the front.

[@etet4736]

@@fuckused7735 Had shop do them. Don't have room to work where I live at.

[@mazilerocky]

How do you remove the sway bar end link bolt ?

[@ThatLexusISGuy]

Alan key and a hand wrench

[@javis350fsport2]

Where u guys located?

[@BreakersStereo]

Oxnard CA

[@EARDRUMASSASSIN]

How long did this job take from start to finish ? Great video . Very informative.

[@BreakersStereo]

From start to finish it takes us about 2-2.5 hours. If someone is to do it themselves with not as much experience I would suspect about 4 hours.

[@BreakersStereo]

And thanks!

[@markg.1935]

What's the wheel specs?

[@scorpio_9810]

he did mention in the video. 19x9.5 +35 rear and 19x8.5 +30 front.

[@ThatLexusISGuy]

What’s the torque specs or where can I find them

[@badass1g]

20’s woulda looked better don’t you think? Not bad though! Easy install 👍

[@jpizel1070]

Those stock struts will need replacement in a few months. They won't handle the load. Should of gone with coilovers or half downs.

[@LUISMARTINEZ-fy9wx]

how will coil overs handle more of a load? assuming your dropping it the same amount as the springs in this video. I purchased koni shocks and struts with h/r springs on my Bmw after blowing ny stuck struts from aggressive lowering ....I'm looking at dropping Lexus isf but I'm concerned about the camber and toe . Nobody talks about this but you will be eating up tires no doubt if not lowered properly. some videos show camber adjustments but haven't seen a solid perfect fix for this issue .. what's the ultimate Combo for lowering with 19 wheels , professionaly 0 camber or toe issues ????????anyone ???