How to Maintain Your BALISONG!! - Butterfly Knife Care 101

[@WillHirsch]

SUPPORT ME ON PATREON: www.patreon.com/TheWillHirsch Hey everybody, hope you learned something today and if there's anything you think I missed, reply here and we'll start a thread of Balisong Care tips!

[@ivanpreston1911]

Could you respond to my dm on Instagram it’s from @senorivan5 and I also have other questions to ask because flipping is a little different for me

[@addisontrue8769]

where can i buy just a ton of new washers like you have?

[@WillHirsch]

@@addisontrue8769 Knifekits.com

[@addisontrue8769]

@@WillHirsch thanks

[@chotaadam]

Can I use honing oil to lubricate my pivots?

[@TheHilo623]

Man has 420k subscribe button on screen, smh. Giving him a whole like.

[@TheHilo623]

HOLY SHIT WILLHIRSCH.GAY I'm buying when I get paid tomorrow. This channel has become a fav

[@WillHirsch]

Yo thank you so much!

[@set2860]

@@TheHilo623 If you love it, then you should join the public side of the Discord! We've got an active community and lots of gays :P

[@TheHilo623]

@@set2860 I have done it. Do I win a prize

[@barrymcockiner2674]

@@set2860 is will hirsch gay?

[@meisteryoda7598]

I got a few headphone cleaning tools cuz u recommended them in a other video and i love them!

[@WillHirsch]

So glad to hear it!

[@nebulus48]

I have like a 25 year old balisong that my dad used. He must’ve took care of it because it works amazingly.

[@zacthefishy6036]

nice

[@blazingrage1427]

I am just getting into balisongs and the tricks you pulled off when you pulled it out completely just blew my mind! You've earned a subscriber.

[@MoeHound]

2:08 for those wondering, fucking flawless :)

[@awesome_johnathan]

I can’t wait to get my Atropos for Christmas Edit: as of the 11th I received my Atropos kirat 2 it flips gloriously and I really like it

[@someimmature12yearold81]

I can’t wait to get my pro v2!

[@j.dockss4390]

can't wait to get my demon!

[@ballistoliusgaming5456]

I get my kirat in Birthday 😊😊😊

[@huntersearles1674]

I bought a Damascus Demon for my birthday this year... and this is EASILY the best, and most beautiful knife ive ever owned

[@michaeljcaboosem.j.c7046]

My Demon got confiscated by my school lmao

[@addisontrue8769]

yay! your videos are looking and getting better every time!

[@WillHirsch]

Thank you Addison!

[@someimmature12yearold81]

I love your vids!

[@Fantastic_Mr_Fox]

@@WillHirsch I have a question: is there a risk if you don't oil your Bali, and also do squiddys have any difference because they're plastic? Like not having to oil the blade?

[@WillHirsch]

@@Fantastic_Mr_Fox usually you don't need to worry about oiling your squiddy, and some oils can hurt the plastic too

[@Fantastic_Mr_Fox]

@@WillHirsch What about the bushings though? They don't need oiling? No KPL needed? Just checking because I really don't want to misinterpret that ^^. Also how effective is loctite? Because he squiddy-B is supposed to come loctited but after one day of use the screws need tightening. So I'm wondering if either that's normal and loctite does something else, or if it doesn't last too long, or it didn't hold. Or perhaps they didn't use loctite?

[@pvthon]

I love watching your videos I can see the time and passion that you and Brandon put into these videos

[@thejudgefrom69]

Ok.. I’m spending soooommmee cash for Christmas.. on a quality long lasting benchmade 62 so I’m gonna listen to this video AND you just gained a subscriber

[@thriftstoregucci3978]

For lubing a bearing knife, try using yoyo lube. There's thin and thick yoyo lube and they're pretty cheap

[@zacthefishy6036]

interesting i have a baring knife i might use this

[@scottg7321]

I cannot agree with more “Using windex to clean handles”. Has saved me a ton of times when selling a knife that had a greasy handle from flipping after eating a burger and fries. My only grief with windex is that it may have slightly hurt the PVD coating on my HOM specter, but since that is the only bali I can think of with a pvd coating atm, I HIGHLY recommend using windex (or generic glass cleaner brand) for balisong handles

[@lightning_roundz0075]

i needed this i want to keep my balis in better condition and stuffff also epic vid

[@LushiFlipz]

Why fors this say 2 days ago

[@jr-lr5ld]

@@LushiFlipz patreon

[@drex5160]

I legit misread that as balls

[@milez7431]

Time traveler

[@LushiFlipz]

@@jr-lr5ld oh ok gotta go buy the tier then

[@NatFreeman666]

My best friend made the cue you used at 1:24. It always makes me smile when one pops out of nowhere.

[@honk3e]

I'm just getting into balisongs and the only tricks I know I learned from your video's and I'm currently using a $10 balisong off of Amazon and it's not great but it's the best I can afford tysm for making these videos, you inspired me to get into Balisongs so thank you

[@sumi3909]

that's cool, if you are learning maybe you should try saving up some money to invest in a better balisong, you could get a good one off of amazon or if you really save up enough you could buy a low budget good flipper like the Squid Industries Mako for example.

[@honk3e]

I'm only 12 and my parents say that if I want one I have to buy it myself so the best I can even try to afford is a cheap one☹️

[@sumi3909]

@@honk3e you could try to save up for a squiddy or really save up for a really good balisong at a cheap price: the mako v4.5

[@Ivan-se5ge]

I love this video! Recently I was gifted a $50 knife, and am hoping to keep it nice and fresh :)

[@zacthefishy6036]

nice

[@LushiFlipz]

Hey welcome back will its sad but it worked on my 5 dollar flipper sorry i cant afford expensive knives

[@oveson88]

Hey you gotta start somewhere. You'll get a higher quality bali some day.

[@LushiFlipz]

@@oveson88 thanks

[@LushiFlipz]

Almost every one in this community hate me for having this knife

[@kaliumnitraat]

@@LushiFlipz if you hate someone because he has a lesser cuality knife your a stupid

[@LushiFlipz]

@@kaliumnitraat right

[@TKO_Horticulture420]

I keep a 3cc 26g hypodermic needle filmed with blue loctite. It's a real loctite game changer frfr You just have to make sure after you use it every time you pull back until it's definitely got the needle cleared or else it'll plug up

[@nexxtho6537]

I just bought the Maintenance kit using ur code. Thx for the vid Will it really helped since I’m just getting into the hobby and I didn’t know how to take care of my triton:)

[@supersoaker7]

i always lose it when i see willhirsch.gay

[@VersedYT]

Recently got into the balisong community, so far really liking the people and your videos really help! Plus, you're really underrated, keep it up :D

[@aranwaterhouse7212]

i love your videos and you inspired me to buy my first balisong, i have been flipping for a month and have learnd a few tricks, keep up the good work and thanks for the inspiration

[@nobody8739]

Lmao

[@AshOfSound]

lets go a will hirsch upload makes the week better

[@balisongjihad4108]

Greetings Will, Great video production as usual. You have a great personality for this and I love watching. I feel like you may have gotten a few things unnecessary in this that I wanted to point out from someone who tunes knives for pay. if you have to adjust your screws every time you flip unless u use loctit I’m guessing your bushings are not good. Also I would say you’re giving a bit of half information in Miss truth when it comes to fitting ““ washers because if it’s a bushing knife odds are it’s the bushings not the washers, The physics of how a knife works unless it’s a channel balisong washers really don’t affect how it is tuned all that much you hear people say that all the time when they sell their knives because they want to make it easy for someone who is looking to buy it to fix the tolerance issues but when I get knives in it’s almost never just the washers that need to be replaced.This is coming from tuning almost 100 knives. The orange Kraken trainer for example you should be able to keep that thing cranked all the way down without it exhibiting any kind of binding. Now squid isn’t known for having very great tolerances on their version one Kraken‘s so you can send it back to them and they will take care of that for you that way you won’t have to use any more Loctite on it. That means the bushings are too short by just a touch and you’re basically running only on washers that’s why you’re forced to use Loctite. I personally have never you used Loctite on any bushing Bali after I get done tuning it. it will have barely any play at all if any, and no tap with the ability to crank down on the pivots as hard as possible. So when you say that you have to adjust your pivots daily without LoctiteI feel bad for the tuning health of ur collection. Now if you have a washer Driven knife and by that I mean only washers, you have to use some kind of a Loctite but I prefer using some thing like para cord or Teflon tape because it holds justice tight and instantaneous. The nice thing about Squid And BRS is they use the same inner and outer diameter of bushings on all of their bushing driven models. So for someone who tunes knives I keep a lot of that size bushing and I just cut them down and use my bushing a lap tool to do final sizing. If you have any of those knives that you’d like tuned up feel free to hit me up otherwise for the Kraken all you need to do is mail it back to squid and they will take care of it for you for freeThe version to Kraken is much better I just got my first one a few days ago and I didn’t need to touch the bushings unlike my four other v1 krakens. Now for your audience I doubt this is going to cause any issues and you may know all this but I just wanted to let you know that you shouldn’t have to use that much Loctite I don’t even remember where mine is. Respectfully @relapse_kid_a

[@jingli3919]

my god that was long

[@bramlord42069]

Thepacertestisanevergonnagiveuup

[@mrED123]

Liked half the comment till my head, eyes, and brain started hurting. I’d recommend formatting a long paragraph and using more periods.

[@noon0389]

Huh

[@Shacksabers]

That was longer than any essay I’ve ever I mean ever written in school lmao

[@graysonackerland2420]

I'm glad you're better from the surgery that took a while congrats brother

[@ryanbutcavage4813]

I used The inner strands of para cord instead of lock tight. The nylon strings have enough friction inside the pivot to keep it from backing out. Burn off the extra.

[@balisongjihad4108]

That is a good trick but if you have bushings you really shouldn’t have to use any kind of Loctite that’s the whole point of bushings should be able to take them down literally as hard as you can possibly go without having your handles bind. But for any knife that only uses washers para cord is a great easy way to do it don’t have to wait a day

[@balisongjihad4108]

Has anyone ever called you Ryan but cleavage LOL I’m not trying to give you a hard time I just thought it was immature and silly

[@AlStotz]

Wait 12 hours? Uhg, now I need another balisong. I can see where collecting becomes addicting. 10/10 would flip again.

[@ezgtaiko]

Brandon's Texan hat dude is seriously a blast

[@robbyrodriguezjr.5201]

Dude, uhm, ...Honestly, I have owned KPL for some time now, and only JUST NOW, because of this video, I've learned that it literally stands for "Knife Pivot Lube".

[@sziph_burlap]

Just rediscovered this hobby and this channel! Gonna need to get some more lubricant.

[@Person-di4fc]

Just got my first balisong. Thanks for the video!

[@uprising1557]

3:25 "you can't go squirting oil all over your balisong like it's an anime figurine" 💀💀

[@jakemiller9795]

thanks i recently bought a marcolo knife and cant wait to get it this really helps thanks man!

[@sheepledog3573]

Felo bits are awesome drivers as well. Both wiha & felo are made over in Germany good stuff.

[@DemonTime27546]

Thank you with all my heart for this. I lost my tool that came with the trainer and this relieved my by 100%. Your vids are never unhelpful! :D Edit: I'm not very experienced with knives, but does the knife fall apart if you keep using it if it gets too loose?

[@X3GoldenOfficial]

It does not fall apart but it does get looser as you use it more and more.

[@ethanowen159]

high quality as always 😊

[@haneulcho3759]

Yep

[@forreststandley3529]

Necropotence in da wild

[@brokcen2748]

How was this comment posted 2 days ago

[@ethanowen159]

I transcend time and space

[@raiden168]

This channel is so underrated its a war crime

[@deathstarter4242]

I don’t exactly know why you don’t have 100k subs yet, but you’re still awesome!

[@jordanstewart3466]

Another good brand I have found is Wera. On Amazon, you can buy single torx drivers, which is what I prefer over bits.

[@ea4443]

I finnaly got the choker fan after watching your tutorial. The best for the choker fan, I have seen. But still I wait for the mighty palm stand with my 30$ balisong

[@Lagoon7]

Comes out the same moment I ordered a spooky triton 👻

[@Flxkzz]

I got one of the nauts, congrats on the triton :D

[@Biblicalgiants]

Great video! Will, what if I have Glidr pivots that have T10 torx screw heads on the ends of each pivot? Should I apply loctite to both ends of each pivot? Thanks for your time!

[@WillHirsch]

Loctite in one end should slightly affect both, so I wouldn't over do it. But, if the other screw starts to come loose at a later point, then do it!

[@Biblicalgiants]

@@WillHirschOh cool, that makes sense. I'll try that for sure! Thanks again.

[@longerneck3216]

Nice video man I was watching this vid while tuning my triton

[@cameronpannell2694]

Even tho I don’t have a Bali song that has bolts or what ever. this video still helped. my Balisong sounded really rusted so I am going to get the kpl when ever I have enough money. And hopefully it doesn’t sound like a cats nails on a chock board

[@trigger796]

I suggest ditching blue loctite for red 262, it’s way higher strength and does not, I repeat, does NOT require heat to remove or clean. It’s fussy but acetone breaks it down and shouldn’t harm your bali. Unless it has like dye or something in the G10 so then maybe. I guess I’m speaking in terms of titanium or steel or aluminum handles

[@set2860]

*aggressive merch plug*

[@WillHirsch]

AGRESSIVE

[@cdubb155]

WillHirsch.gay

[@jr-lr5ld]

paracord and teflon tape work just as good if not better, and you don't have to wait.

[@balisongjihad4108]

Yeppers

[@balisongjihad4108]

He needs to get help with the new jive

[@Zrox-u1v]

0:14 I have sinus surgery as well

[@eowynrodriguez4435]

I LOVE your knifes

[@nexif4454]

i got a balisong yesturday, still learning tricks

[@roadmonkeyx8409]

I have a question to anyone who is experienced, if I am getting a cheap ten dollar knife just to start do I need to do all of this as soon as I get it or can I not do anything until I get a better knife?

[@3point8iscoolyes27]

That depends man, it’s probably gonna break very fast

[@obivaughn11]

Good to know I have been doing it right for the last 2 years. Thanks Will!

[@J4ckkn1fe_12]

I feel like I was watching a dank pods video when you pulled out the IEM lmao

[@Luke-vk4lq]

Man gotta love living in New Zealand. I went onto the KPL website the oil was 13 dollars and the shipping was 58 DOLLARS!!!!!!

[@laylow31010]

If ever get one those china Bali songs with the blade with holes and the small screws are starting to fall out put some long setting super glue in there then take a flat head and tighten it works for both sides

[@FrogsRobloxLab]

Thabk you for the awesome tutorial! I can't wait to do it :) Now I only need a balisong

[@erikspyderco5273]

Silicone treated cloth on DLC coated blades and handles for that new look.... also armor all works on dull finishes like DLC aswell... but just dab a micro fiber cloth in it.

[@jam3swang]

Subtitles: Today we’re going to be taking things [Music]

[@kalordalknl1806]

3:25 WHAT A QUOTE LMAO

[@goodatsolitaire]

Good stuff man, never heard of using Windex for cleaning, but I'll keep that in mind. Every Loctite tutorial I've seen, they're applying the Loctite directly to the screw instead of putting it inside the pivot, as you did - any thoughts on that? Your way sure looks easier, I ended up having to magnetize my driver and keep the screw on the tip while I applied Loctite with a toothpick, it was kind of a pain. Looking forward to your Serpent Striker review, I got one recently and I'm mostly happy with it. It's my first bearing pivot knife and it's very smooth. Thing is, I don't especially care for the material they use on the outside of the handles (carbon fiber, I think?) It feels weirdly bouncy, if that makes any sense? Like when I'm finishing an open or close, the handles momentarily strike and bounce off of each other. And for some reason I often end up pinching my thumb between them when I do closes, never had that problem with other knives. Might just be my own sloppiness. Anyway, I'll keep an eye out for the review. Peace brother

[@MarsOneBeatz]

Will is the only person I've seen on KZbin that applies the loctite correctly, at least for balisongs that use sex-bolt fasteners. A sex-bolt fastener is what is called a blind-hole assembly- air cannot escape from the bottom of the female end as it is closed off. Thread lockers should always be applied to the threads of the female portion of the blind-hole assembly. You should only ever apply threadlocker to the male screw part of the fastener when said fastener is a thru-assembly- where air can escape through the female end of the fastener because it is open allowing the air to freely travel through. I don't get why all of these other big balisong KZbin channels (Squid Industries for example) get this wrong... A simple search of instructions from any thread lockers manufacturer will clearly state the same as I have here.

[@jasonsnagel]

@@MarsOneBeatz thanks for sharing that, That’s great information 👍

[@austinwood629]

That mudbug shirt is sick!

[@sox9629]

THIS VIDEO I HAVE BEEN WAITING FOR!!!!!!!!! THANKY OU!!

[@goransolheim8772]

Make a vid about the differences in tuning balisongs because some people think that means tightening the screws some people would say tuning is redoing or fitting bushings or washers

[@thebrandonbakerclone]

This is a good idea!

[@milez7431]

Ok so I just got into balisongs and this vid will help me a lot but it’s a little confusing so can you make a step by step vid on this? Plz it will help me a lot!

[@harmonyspangler6373]

Another thing you could use instead of windex is isopropyl alcohol

[@balisongjihad4108]

Yeah I thought he would say alcohol I thought that was pretty much the standard plus it’s a hell of a lot more effective

[@colerein1098]

Please review the cold steel balisongs please. They make other quality knives I am very curious to see if their lower price tag on the balisongs they produce are a sign of lower quality

[@nikkonaa]

I'd like to add that blue Loctite 243 is a more oil resistant formula ✌️

[@matthewprior3762]

I knew this was the one stop shop for my needs. You guys are awesome!!

[@SolaireFlair]

I'd like to vouch for iFixit kits for working on your balis as well. With as many hobbies that I have that require screwdrivers, it was a no-brainer to pick up an iFixit and hot damn that thing can breakdown a bali like nothing else.

[@dippy9156]

Thanks will

[@vanmalsawmachawngthu6154]

OMGGGG YESSSSS NEW VIDEO FROM WILL

[@jonasjensen8217]

YAAAAY NEW VIDEO!!!!

[@bokgriessel1247]

Man your vids are amazing and I love the vibe you guys have!! keep them coming!!! Thanks from a Bali noobie

[@thebrandonbakerclone]

Thank you so much!!

[@giacomopretto1150]

Best channel ever!

[@JoeyMRDK]

I FINALLY GOT BEHIND THE 8 BALL

[@hamsterlover2864]

Been waiting for daddy to post

[@thebrandonbakerclone]

Hello son

[@corduroyyy379]

can u do a tutorial for tuning bushings?

[@balisongjihad4108]

I’ve only ever had to Loctite knives that don’t have bushings but if they’re not tuned well and the bushings are too short I can see how you need it. But at that point you should really just send it to have the bushings re-done

[@nikkonaa]

Thanks Will, this is the most informative bali care vid I've seen yet!

[@torgomax]

Trying to decide if I should get into this hobby..

[@greal230]

Almost fell off my chair by laughing at 5:30

[@jameswitcraft7038]

You tired is more energetic than me at most excited state

[@ezra_rosco3]

IM DEF GONNA GET A SHARK COMING SOMETHINGGGG

[@this_dood_1244]

Hey! Thanks for the new video. Hope your recovery goes well!

[@goob753]

I’m completely new and I need a recommendation for the best beginner training thingie

[@essenkillerthezombiektz5026]

Ok so I’m typing this after the rest of it basically in short Boker plus trainer $30-50 (you can get it on bladeHQ and a few other places) Andux trainer off amazon $26 And if you need cheaper the lofri BTFLKNS Amazon trainer is another you can go for $10 And I’ll edit in the links here if I can find this comment agin www.bladehq.com/?search=Boker+plus+balisong That’s the bokers $30-50 This is the Lovfri one $10 BTFLKNS Practice Butterfly Knife, Unsharpened Butterfly Knife for Training, Safe Dull Without Danger with Spring Lock, Made of Reinforced 18/8 Stainless Steel for Training Enhancement Skills(Orange) www.amazon.com/dp/B086S7Y7YJ/ref=cm_sw_r_cp_api_i_0UkOFb5372FHD?_encoding=UTF8&psc=1 Much long link holy crap And this is the one he recommended for $26 (also it comes in red and black too) Andux Land Folding Stainless Steel Flip Player Lightweight CS/HDD45 (Orange) www.amazon.com/dp/B07PJY251J/ref=cm_sw_r_cp_api_i_fZkOFbEMSMY39?_encoding=UTF8&psc=1 Ok why does amazon feel the need to make the links so long?? And here’s the ones I have that I can half recommend but I’d say go for the boker or Andux Fecedy 2pcs Butterfly Knife Trainning Practice Comb Unsharpened Blade for Practicing flipping tricks www.amazon.com/dp/B014ZHGYCQ/ref=cm_sw_r_cp_api_i_G1kOFbKNKHPWE?_encoding=UTF8&psc=1 Anyways I’d say go for boker or andux and I’m STRONGLY recommending that And here’s what I wrote originally that I cover in other stuff lol He made a video on this where he recommended one that’s like $26 dollars in amazon so you can ether buy that or boker plus has a few good trainers under $50 too But if you don’t wanna spend much money at all I have the $10 2 pack of “fecedy practice butterfly knife...” and I will say it’s cheap and one of them keeps falling apart but it’s ok if you just want something you can beat up and lose But I HIGHLY recommend you start with one of the other two I don’t know for sure how bad these trainers are I’ve never flipped anything else but I can tell that their bad so I’d say go for boker plus or the andux balisong trainer off amazon There’s also the “BTFLKNS practice butterfly knife...” that’s a MUCH better trainer he’s talked about that I forgot about before And I would just like to add sorry this was so long and disorganized I was kinda jumping around I hope this helps!

[@essenkillerthezombiektz5026]

OH I just remembered you could also do the squiddy for $40 but it will be hard to go from that to a real blade sense it’s so light www.bladehq.com/item--Squid-Industries-Squiddy-Butterfly--83793

[@someimmature12yearold81]

You should get a pro v3 for Christmas, it’s a really good flipper and has perfectly tuned bushings , washers, and zen pins, it has a bunch of pros (hence its name) and like two cons, if that’s to expensive you should get a bbarfly og2, it has bushings but there aren’t perfectly tuned they still have bushings and no washers but there are TANKS, and they will definitely last you, both of these options are great though

[@doanerific9908]

I can’t wait to get my first Rep!

[@pkmist186]

nice, ive got my new bali coming in today

[@saltyfox1321]

Can I use speedcubing lube on a balisong? They are silicon based.(Martian/ weight 5)

[@alph4be4st19]

Can’t wait for a 2020 collection vid

[@itswubbaidk4589]

Lol this helps cause you got me into flipping and now im glad i know how to actually care for them lmao

[@kusboo2220]

Any tips for maintaining the squiddy?

[@peaup6014]

I just learned how to do like a giraffe but Instead of the ring finger Chaplin you through it and catch ice pick Chaplin😁also sup, glad to learn how to take care of my shi

[@balisongjihad4108]

The Men in black girafter me

[@izzypray3028]

Can you do a video talking about the difference in bearings / bushings?

[@dahomiecril7962]

Great video! Hope the surgery went well

[@nathanpk4822]

How in the world does he not have more subscribers?!

[@DopeNinjaGaming_]

Been waiting for this banger!!! Thanks Will 👍🏻

[@lev388]

Love the vid Will! just wondering, do you recommend the Nautilus from Squid? was thinking of getting one, wanted to know your opinion.

[@whitedayblade1656]

I got one and it's great. Only negative thing: i'm not a fan of the pin system. Sometimes when youre doing rollovers or sth it bites youre skin. But Everthing else is great, seriously. The quality, the play, the balance, it's very quiet and sounds satisfying, the weight (it's a very light knife, i like that). And of course the color 😍 I got the one with silver blade and golden handles and it looks amazing!

[@lev388]

@@whitedayblade1656 Yeah, that's awesome! I was actually planning to get the golden handles as well. Thanks for your input!

[@balisongjihad4108]

Krake Raken or Nautilus

[@balisongjihad4108]

@@whitedayblade1656 Dude if you’re getting bit by a tang pen then your form need some practice Zen pen nerves so really the only thing people ever get that from and even from those it’s resulted from not starting With enough handle before the pivots at the start of the trick with your thumb. But maybe you’re thinking of this and nipple on a different knife Because the Nautilis has tang pins which should never touch your fingers on any trick. Hit me up for help if u want @relapse_kid_a. On IG

[@whitedayblade1656]

@@balisongjihad4108 I'm a beginner and sometimes my technique is not perfect. So sometimes it doese happen that it bites me.

[@gloriavargas8112]

I used olive oil and it was super good

[@TKO593]

One of my Balis is really well tuned, but one bearing has a squeak. I really don’t want to take it apart until I really have to though. I chalk it up to a unique bali sound.

[@bhood1757]

@Will Hirsch, in the beginning of the video it looks like you have bladed version of the artisan cutlery kinetic tool, I have been looking for a replacement to make mine have a live blade and have not found one yet. If I am correct and that is what you have can tell me where you got it. Thanks

[@duncanrampen]

Took apart my bali last night specifically for this video so it can tell me what I did know last time lol

[@kxi]

gay

[@duncanrampen]

@@kxi thanks