How To Make 12V Rechargeable Battery From PVC Pipe At Home

[@kartikverma8415]

Hey bro.. Where is BMS ( battery management system ) ??? This is very important for rechargeable batteries.

[@01Hudesohn]

In addition, these 3 battery cells generate more than 12V since one of them has a maximum voltage from 4.1 to 4.2 Volts at 100% charge.

[@maximelorenzetti8014]

I was wondering the same question... Linked to a drone without safety it can burn... Except if he works under low voltage compared to those 12V

[@01Hudesohn]

Right..That´s why i use a special chager that has an integrated balance charging system.. Like IMAX B6 or someting like that.. Is the safest way to load..

[@01Hudesohn]

Since i use used cells, i quickly had to learn that a special charger should be used for this..

[@adgstech8263]

BMS IS IN CHARGER

[@Bornintheshadow]

How to make a 12v charger pls

[@mr.bangladeshihacker7932]

Bro can I drive a brushless motor with this battery?

[@mrhkexperiment]

super

[@musicaluniverse1676]

(you can find it on old dvd player) thanks for the information 👍

[@chandrakalanagaraj1126]

Very use full channal

[@pilotmTheConjurer]

This is not a safe device! Handle with carefully! It doesn't have any protective mechanism

[@sarthakgoswami391]

Super se bhe uper

[@gobikumararun8705]

Add bms for long life 👍

[@triggmonstergamer]

Nice good

[@-vishwjeetsirsat8330]

What is the name of background music... Plzz reply 🙏🙏

[@technicalninja711]

Link in description

[@albertjoseph5808]

@@technicalninja711 music name please replay

[@RuinedCraft]

Bro battery bohat easy hey kuch aur banao 😯😯😯🙏🙏🙄🙄🙄

[@technicalninja711]

Lead acid battery banata jald hi

[@swatirahman1640]

Please make the lead acid battery

[@sonukashyap4365]

Bhai setup box bana ke dikhao bhai pvc pipe ka

[@shreyanshjain6753]

Kya hum connecting wires ki jgh USB use Kar skte hai

[@hirendutta5047]

Haa yaar

[@bharatsaroopa1014]

Congratulations for 200K subscribers 😘😘😘

[@bharatsaroopa1014]

Thankz for highlighting 😘😘😘

[@santhoshm.v6994]

Do we need bms...for this ?

[@codingideas3355]

Awesome!!!🌈

[@ramiro14041991]

Amazing work!!! Were can i find the connection diagram!?

[@lacajadecarton4822]

Well imagine havings 3 batteries from an xbox control. But+ from one and - from other are connected. All this inside a box with the free conections you left as the pins

[@glasseffect]

Looks dangerous: 1. No cell balancing while charging. 2. Did you check battery state before adding them to the pack? 3. The 12v is not stable, it will begin to fall continously as there is no booster circuit to maintain voltage. What exactly is the target application of this? If it's 12v, it won't be for long. If it's anything less, this thing will burn it to begin with.

[@ffb2198]

If you look at rc car/boat etc. It has a same wiring... its not use bms for maximum power output... about the charger, that type of connector is for charge using imax b3/b6 By the way... If you search "2s/3s-6s," its has the same wiring like this... only the battery type is not same... if you watch RC youtube channel, they will charge using the same charger (b3/b6 and supported charger). So, if u saw people wiring like this, dont comment "its dangerous/no bms"

[@HPSVLOG-gl1jx]

How to charge this battery with li-ion battery charger module plz tal me ok 🙏🙏🙏🙏🙏🙏🙏🙏

[@HPSVLOG-gl1jx]

Because I have no li-po battery charger

[@gbfrm9456]

Can I know how do you charge this battery?

[@luckyyt5558]

yes

[@Iploac]

A charging module maybe required to charge the lithium ion batteries

[@ffb2198]

I wonder, why people say its was dangerous? Its actually no because If you look at rc car/boat etc. It has a same wiring... its not use bms for maximum power output... about the charger, that type of connector is for charge using imax b3/b6 By the way... If you search "2s/3s-6s," its has the same wiring like this... only the battery type is not same... if you watch RC youtube channel, they will charge using the same charger (b3/b6 and supported charger). So, if u saw people wiring like this, dont comment "its dangerous/no bms" Sorry for my bad english Edit* This is an example of charging kzbin.info/www/bejne/oHe5iYmVbrZgj9E

[@chordscrushervamsi]

He has a sanitary shop or his neighbors

[@tiktokmeera6421]

how

[@chordscrushervamsi]

Because ihave a sanitary shop at our house which sells PVC and othrs and i uses PVC for my crafts for free

[@tiktokmeera6421]

@@chordscrushervamsi oooooo😑😑😑😑

[@senthilsenthil7045]

@@tiktokmeera6421 டணோவுமெ

[@mohitcreative2678]

@@chordscrushervamsi hy

[@الباشمدرب]

The cnction again

[@GotaSir911]

Next time check the batteries that they are the same voltage. You don't want a loa charged one and add a bms. Good project comrade!

[@__-hh3gt]

Make your video in English language so everyone can understand. Greetings from Saudi Arabia. Thanks

[@technicalninja711]

Sure

[@kumarpalbokriaoffice5338]

What about over discharge,over charge and short circuit protection... where is the protection circuit?

[@swapnamoyhazra6036]

The charger used in this video is the lithium ion battery charger. It itself has overcharge protection. If you want to protect over discharge and short circuit ,then you have to add bms

[@amitabhade8728]

Yes

[@omkarkhade4602]

@@swapnamoyhazra6036 Yes,the charger will take care of that stuff while charging. But when the battery is discharging when connected to a load it is good to have a bms for the battery pack. If the battery is accidentally shorted while using then it may get damage.

[@henrygonzalez806]

@@swapnamoyhazra6036 it does not. Short circuit and over discharge can happend while not charging the battery.

[@swapnamoyhazra6036]

@@omkarkhade4602 yes, it has only overcharge protection because the output of the lithium ion battery charger of 3s is 12.6 volt, it can not charge over that. Also it has indicator to show whether it is fully charged or not, but if we want to add overload, short circuit and over discharge protection, we can use 3s bms

[@shashikantbidiyasar1324]

First View First like

[@-vishwjeetsirsat8330]

Your projects are so nice and your creativity is also nice... 👌👌👌

[@ultrongaming1177]

Nice but there is no protection 🙂🙂

[@technicalninja711]

Battery charger is there so it balances the battery voltage

[@audiepineda2878]

The balance charger is ok for charging. However , there is no protection for ovet discharge

[@syedpulak54]

Hello dear can you please help me about how I can charge 12 volt, please 🥺

[@souvikroy9331]

I will surely try this thank you very much for the great idea❤️

[@pranavk6052]

Bro how to charge this battery

[@chandradive393]

12V Battery Charger price how see

[@mohdyousuf7142]

Wow i like this because this vedio is great

[@saqlainrauf2442]

Agar 4 cells lagana hon to kitna cm ka pipe lga ga

[@lakkhigupta5892]

Thanks bro,you made it.it will help me a lot 😀😀😎😎

[@rajaramanspuvairaju9246]

Instead of connecting wire (released from old DVD player) can we use charging port? What will happen if balancing wires are not connected to battery?

[@ffb2198]

Every battery charged capacity will not balanced and it could damage cell 1 and cell 3 because overcharge

[@deftsketches458]

Amazing idea very neat project

[@antresia.9723]

I want to make a 50v lion rechargible battery I have like 3 laptop batteries. 11.1 v, 10.8v and another the same voltage 10.8v. I think.

[@tiborberenyi643]

WARNING! TLDR Batteries are no toys! Never build your own batteries without complete knowledge on electricity and batteries! This project can seriously harm you, your family and your property! Lithium-ion batteries are very flammable. /TLDR Voltage is used to measure battery charge level. There are different types of cells, with different voltage ranges. Typically a 12V battery made of 18650 cells will be fully charged at 12.6V and fully discharged at 10.5V, but always check the cell's voltage chart! Never mix different cells in a battery! Even if they are all 18650 but made by a different company. The battery housing should not be damaged, and a short circuit must be prevented inside and outside the housing. A good Battery Management System (BMS) is ALWAYS required with these batteries, even if the charger has one! It's 4 main protections mechanisms are: -Overvoltage: In case the charger fails to regulate voltage either because of grid problems, or in case an incompatible charger is used. The charger has to provide no more the battery's fully charged Voltage. Otherwise the battery will be damaged and can catch on fire! -Undervoltage: This one is to protect the battery itself. If the battery would discharge below the minimum charge voltage, it would die. -Overcurrent: In case of a short circuit, or under higher load the battery will drain more current than it can handle and it will overheat, expand and possibly explode/catch on fire. -Battery Balancing: It ensures that cells are equally drained to avoid and overcome wear differences between them. Batteries are always getting warmer when charged or discharged, so they should not be used in too hot environments or places were passive cooling in not possible (i.e under a blanket). A lithium-ion battery fire is harsh with much heat and much larger flames then you would possibly expect. It can basically only be put out under constantly cooled large amounts of water. Also it's smoke is wild, highly toxic and cancerous. @Technical Ninja You may have put on this tutorial with good intentions, but the lack of such disclaimers in the video can harm people. You are responsible for what you share, especially because you have many subscribers and you can reach out to thousands of people.

[@deewanarecardingstudio3149]

Hand blendar plz भैया बनाइये ok

[@AethesticPro]

Please make a 12v solar panel 🙏🙏

[@nparu5893]

kzbin.info/www/bejne/bYKXY6mIi8tjj8k❤️❤️❤️❤️❤️❤️❤️🔥7🔥🔥🔥🔥🔥

[@borishondas9424]

Glad to find out this channel . The contents are epic !

[@vinayindra0927]

abhi tak chutiyapai hi dekh rhe the tech channel ke naam par, but this channel is worth tech channel thankyou.❤️

[@ELECTRONICS_EVERYTHING]

Where to get this type of charger?plz tell me

[@xyz-iz2kf]

search b3 balance charger

[@mahendrabanani9030]

Brilliant idea I m making now this one with battery management system (BMS)

[@tihomirkolovic4910]

PP šđ

[@abhiverma1557]

Bhai please aap is baittry ka giveaway kariye please

[@srinuch1035]

Please make a battery charger like b3 pro

[@anamikakeshri4338]

Bhai mera 18650 ka 12v batter pack backup nhi deta ha suru me 40-50 second 775 motor high speed pe chalta ha phir slow ho jata ha pls koi solution batao do😞🙏

[@arjit12thc19]

Title: how to make a 12v battery from pvc pipe.. Reality: fixed 3 lithium batteries inside it😂

[@bhaskersharma2268]

The video is good but title is ambiguous. Battery isn't made up of PVC. Its the case of battery which is made up of PVC

[@RuinedCraft]

CPU fan se kuch banao 😯😯😯🤔🤔🤔🤔🤔 PVC pipe wala CPU fan se ❓❓❓😑😑🙄🙄🙄😂🤣

[@technicalninja711]

Okk

[@nischalsinghchauhan8244]

इस बैटरी को motercycle में भी प्रयोग कर सकते है। टेस्ट करके बताओ।

[@khudiramkisku]

Solar se charge ho sakta hai kya..? (10w, 12v)

[@martinomarletta2419]

Molto interessante ma elimina quella musica fastidiosa o almeno abbassa il volume. Comunque grazie per l'idea

[@funnyhicha2248]

wow bro.................................

[@suneeramoidu4722]

Wow,what a powerful rechargeble battery bai😍😍❤️

[@sheikhsarmad4868]

Hayyye

[@sheikhsarmad4868]

@@TechBots_yt oki

[@sheikhsarmad4868]

@@TechBots_yt mera bhi yahi haal hai

[@invanto0076]

Super se bhi upper.👌👍

[@sumreshbhansali4514]

Can we make a power bank with the above battery connection and what power bank module I can use do let me know ji

[@GamingGurujisp]

Mast🤠

[@technicalninja711]

Thanks bro😊

[@albertjoseph5808]

Super video

[@legitfnayt1235]

Now I use car audio inside

[@rajaramanspuvairaju9246]

how to make cordless drilling machine using the above 12v battery

[@bhupendergola1660]

Sir kya old dvd player ki jhagah data cable use Kar sakte hai kya

[@roderickthulani9979]

That's 3.9V stop lying to people 🤣...a 12V needs 9 cells.

[@fastgamer_9756]

Ab rc car banao please.

[@thegamerchannel9565]

This is actually a good DIY channel

[@masalammahmud5809]

Motor dc12 volt 775mm nite chai jogajog korben plase phone [phone]

[@ricardoahid]

Para que as baterias durem e necessário uma placa controladora para a quantidade de baterias usadas no projeto. Desta forma que está no vídeo qualquer voltagem elevada ou uma carga muito baixa na bateria elas irão danificar

[@craft-to4gu]

Can we use normal battery aspect lithium- ion batteries

[@krithiki6200]

How much mah is the battery? And how much ampere? Pls tell.

[@STORY4YOU_13]

Bhai ye charger bahut mehnga hai ye kaise bnau bta do Bhai .plz...🙏😅

[@ammikhan2676]

Bro can you make psp 3000 battery i need to make it

[@rudro3417]

Bhai mere pas 12v battery charger nahi hain, main kya karu? Kiya use karke charge kar sakta hun?

[@neoncity491]

I am Inspired with his neatness of his work ..... your every videos are ownsome ......

[@TuberEver]

How can you Recharge the 18650 Lithium Battery with B3 Impact Charger? my Frd!

[@Trader.0234]

एक बैटरी कितना valt ka hai

[@srajanbg9601]

12 volt

[@SahilGupta-nb7mg]

Use BMS(battery management system) otherwise its a bomb.

[@tomandjerry3260]

Thum eak badaa ninja

[@reenachahar1621]

Bhai mast 💣 bomb bnaya hai aap ne kisi ko marna hai kya view ke liye keu krte ho yr reply jarur krna

[@kofi8259]

Without betray protection this project is not good. You might burn your home

[@Amgamerz450]

Kia is ko 12v 1A ky adopter sa chrag kar saktay hain

[@Gambiarte]

How to make a rechargeable battery using rechargeable batteries... omg...

[@Black_Screen_Song_]

Bro 20 voltage dc adjustable power supply bno pleaseeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

[@__unknown._]

Congrats for 2lakh subscribers

[@jaymcquillen]

More people need to call you on your bullshit. This is dangerous.

[@sanjayvasava2262]

Simple remot control receiver ko cemara lagao.

[@nparu5893]

kzbin.info/www/bejne/bYKXY6mIi8tjj8k❤️❤️❤️❤️❤️❤️❤️🔥7🔥🔥🔥🔥🔥

[@-mose191]

Awesome! Say... What charger did you use sir?...

[@krishnatrivedi2004]

How to make a 12 volt battries with normal cell plz

[@sukhensaha3298]

Charge diya to battery blast hagi na kharap hogi??

[@ankitgondwal1943]

Bhai circuit diagram banaa karke dikhao Aise samajh Nahin a Raha Kuchh Jarur banana bhai

[@rupshihighschoolrupshihigh7707]

gggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggg

[@ggyun]

Where is the protection circuit?!!!! Where is the protection circuit?!!! Where is the protection circuit?!!!

[@SuchByte]

Dude... don't solder to 18650 cells and use a bms...

[@-vishwjeetsirsat8330]

Sir, Ap video me apna avaj daliye

[@technicalninja711]

Jald hi 1-2 months me setup hone ke bad

[@iansena6852]

Sorry kid, you lose my like, becuse you ignored the BMS

[@kavyasingh4621]

Sir adi experiment has copied your idea....

[@omkarkhade4602]

Very nice video 👍 Connecting a bms will add more value to this project.

[@yulodede]

Is it fine to series a different capacity battery together?

[@firepiecegamer8819]

Tum muje sasta vala drill machine banakar dikhao chargebal

[@misterzaboyny607]

Бред, зачем было на выходной контакт наращивать тонкой проволокой?

[@kundansolanki5645]

Bro bro bro please ek budget power bank price of 100 rupee

[@shamkantpatil5748]

What is the price of battery?

[@shamkantpatil5748]

Please reply me