How to make a 8X8X8 RGB LED cube using Arduino

[@ElectronicsDemon]

Please subscribe and support for gaming videos kzbin.info/door/hso26jPwvEbGbts5WPpmoQ

[@alirezaojifard4368]

It was beautiful, but very time consuming, economically unreasonable, and consumes a lot of elements. It takes up a lot of space, and it's a very common and unnecessary thing to do.

[@s.c.4363]

@@alirezaojifard4368 Other People would call it "Hobby"!

[@nainoshah3594]

Arey bhai pehly english course karlo please. Warna urdu mein boloo Q sub ko irriated karty hon. Please waiver ki taraf sey request hai. App ko Nahi atii english. Doing good job but please english ki mah behan 1 mat karlo...

[@jodhvirsburner7288]

@@alirezaojifard4368 its called a hobby. people have those

[@danparden8103]

I absolutely loved it. I am definitely going to do this… Thank you!!

[@yertelt5570]

I applaud your patience and tenacity. This is the type of project you tend to find unfinished in the corner of somebody's work shop. I probably would have got the leads on the 512 LED's bent and called it quits, lol.

[@SaachBolo]

Most complicated, most confusing, most amazing, most spectacular, most entertaining, most beautiful thing I have seen on KZbin. Really like your patience

[@ElectronicsDemon]

Glad you liked it!

[@kychemclass5850]

Well done! I so admire people that do projects like this. It would be great if you could sell the wooden jigs - or indeed all components as part of a kit.

[@bozotheclown935]

I wonder if there is a commercial Jig you can get to do this. I see the 16^3 arrays out there looking pretty impressive. If they sold these already prepped, I bet people would buy it...

[@lubbnetobb]

ok i have decided to go with your guide for building my RGB LED cube. i have som experience with electronics and soldering, i have made some tesla coils and other projects but this is on another level. thank you for making this guide, i have ordered the parts ^^

[@TolgaMirmirik]

That is a perfectly done project. Congrats. Very informative and detailed explanations and really great patience, sir. I've saved that project for my time in retirement and I'll make it in a couple of months. Bravo.

[@thomasengelhardt7940]

Impressive patience! It is a great example for trading cost with time. I would rather replace those breadboard circuits with custom made PCBs, it would greatly reduce the tedious wiring need/time at the cost of the PCBs and the less tedious PCB CAD design.

[@aberateklehaimanot9804]

your solder ability,circuit designing and explanation step by step till completion is just superb,thanks for sharing.keep it up.

[@ElectronicsDemon]

Thanks 😊

[@dg-hobbymad9898]

You have Patience from other dimensional world🙏🏻

[@Xhhynn1168]

Wow! This is the best led cube I've seen. I wish there's a pcb layout for etching method and for easier way of making it. Thank you for this wonderful video sir!

[@9662951947]

Yes if there is a pcb layout then we can just send it to online pcb makers so it would take less space and we can put all into the wooden box

[@theesportslover593]

9:42 awesome jugaad 😀😀

[@AlienWacker]

Love the soldering Jigs.... I have tried soldering LEDs in a row, I never thought of this... 👍

[@philiprowney]

I agree, I worked in electronics in the 90's and these are the sort of jigs clever folk came up with all the time. Great jig work I say 😁

[@roshanchathuranga1380]

You have done extremely good job, and can you please upload the anode & shift register board test code and schematic which you have used. Thanks

[@sebastian19745]

Great project, I might try to replicate. However, few toughts: I would try to fit 4/8 channels on one board (maybe one/two boards for each color?) and make a backplane to fit the boards (with the node controller and power lines) . Do not fear to play with the placement of components and maybe try to use the components leads (resistors mainly) to save some wired connections. That way leave less room to errors. Nice layout of the boards, but in my opinion, could fit more circuits on one board.

[@bearspan8549]

Hello I come from Vietnam . I find the things you do really fascinating

[@bdh8889]

Sir very complicated project but looking so good 👍

[@dalewpit]

Excellent video Sir! A very labor intensive project that you were able to make each step very clear. Outstanding and thank you for sharing your expertise !!! WELL DONE!

[@stefanstefanvarga5924]

experiența își spune cuvântul, această lucrare , merită toate laudele plus toate felicitările, în plus îi doresc mult succes și numai bine.

[@naseerahmedattar2401]

Excellent great very good experience nice job. God bless you and your family .Thankyou 💐💐💐💐💐 👍👍👍👍👍👍👍👍👍👍👍👍👍

[@afelar3818]

Pure genious I wouldn't even dare to try this by myself... Dunno if it is harder to create the code or the electric part... Sir, this is art. I mean THIS IS FUCKING ART, CONGRATULATIONS SIR YOU DID IT

[@bozotheclown935]

Pretty good kid. You got you electronic "Organized" stuff happening.

[@matthiasjakob8833]

What a projekt. I'm a absolute beginner, but i see what 4 skills you need to do something like that, respekt 😎👍👍

[@trentjackson4816]

You are a prototyping expert my friend.

[@akashedits6579]

You are very talented bhai

[@electronicslibrary7413]

Great work done by you, full support from Electronics Library

[@ElectronicsDemon]

Thank you! Cheers!

[@manojbhaskar122]

അനിയാ സംഭവം സൂപ്പർബ് ആണ് കലക്കി.. You are brilliant 👌.. Background music വല്ലാതെ ഡിസ്റ്റർബ് ആണ്.. Anyways all the best

[@ElectronicsDemon]

Thanks bro,

[@TechSan1]

As per schematic drawing there is no vcc and gnd to transistor circuit of individual 595 ic. But in yt vdo u have given power supply to all Is VCC and gnd to be connected to all 24 transistor circuits ? further all shift resistor are required to be connected to 5v of aurdino board? Pl respond and Co operate I had requested to provide schematic and code for testing of boards. Pl upload it

[@andymouse]

Stunning work my friend.

[@ElectronicsDemon]

Thank you! Cheers!

[@TechSan1]

Dear I have recently completed building RBG cube after inspiring from ur video. I have assembled boards also. Before putting them on circuit I want to test it. Kindly share code of test program for board

[@medienmond]

If you play this video at 1x speed, you can hear your plants grow. I just fell asleep nearly 40 times over the length of this video, but i finally made it to the end. Never mind, i would not do it again...

[@zwqcv3jc]

Impressive -- thanks for the step-by-step. I'd love to build one of those. Can you tell us more about the programming for the display activities?

[@DigiconSchoolBell]

we learned! every best result take time, very good work and explanation ! keep it up.

[@orfyreus1961]

Respect for patience!

[@markuscloot452]

Very nice made video...Light is changing alltime...How many days you needed to finish the welding ?!?

[@mohamedishan1150]

Well explained project. I'm new to electronics. I really like to build system like this. Can you guide me to a tutorial or a book which is for complete beginners?

[@ps_abhishek]

മലയാളി ആണല്ലേ😁😁 Sound കേട്ടപ്പോ തോന്നി..😁 എന്തായാലും project പൊളിച്ചു ട്ടാ..😍😍😍 നല്ല effort എടുത്തിട്ടുണ്ടല്ലേ.. കൊള്ളാം സംഭവം😍😍

[@floris1200]

Nice project That was a lot of work !

[@ElectronicsDemon]

thanks

[@wmjwell]

Fantastic project! An amazing amount of wiring! Why didn’t you make etched boards? Wouldn’t that reduce the soldering errors? I am amazed about the skills you have shown by making, troubleshooting, programming and finishing this cube! Great job!!!!!!

[@Badomenyt]

After seeing this video....I'll drop tha idea of making led metric🙄🙄😂😂

[@ElectronicsDemon]

😂

[@kanly5065]

Lavoro ben fatto, pulito ed elegante. Complimenti!

[@laurentmarion165]

hello, on the cathodes circuit diagram, the emitter of 2n3904 is not connected to the gnd, is this an oversight? is that normal? thank you.

[@ernandofranco8448]

Best tutorial the word!!Tanks!!!

[@gerrymcerlean8432]

Excellent. Will all those boards fit inside the base of the cube?

[@dhruvsharma8315]

Great Project Buddy, Can i do this for common Cathode Leds as well?? If yes then what would be the changes. Please respond.

[@chrislewis2262]

The cube was always a great project but dude you could have saved more time and headache if you did each colour on 1 circuit board each, preferably "new" ones not used. All 8 channels would fit nicely on 1 board. So instead of having 7/8 boards you would have like 4. It would of saved you time and troubleshooting. Just watching the soldering of them gave me a stroke and I'm a electronics major. Overall good job.

[@1tonygunalan]

Very intelligent work preparation.

[@nacerpaul]

what are the measurements for the jig?

[@sanketthakur2297]

You make it harder by using common anode LED.. common cathode will make your circuit much simpler and easier to program..

[@SkyriderDragoon]

Someone get this man a JLC PCB sponsorship, my head hurts!

[@AlainLafond]

I'm a beginner in electronic. But for me, looks like a good project to learn soldering.... Hahahahaha! Thanks...

[@ElectronicsDemon]

You can do it!

[@kaoshavoc]

Subscribed and will be using this tutorial. Thanks mate.

[@ElectronicsDemon]

ThAnks

[@carlospeguero1143]

Hi, In your schematic the pin 9 on IC1 is disconnected and also pin 14 on IC2. Is that correct? or must connect pin 9 on IC1 to pin 14 on IC2. Thanks for the video.

[@gordonhope9219]

I am trying to figure the exact same thing out. I just built the ANODE board, but the schematic does not buss the arduino read pin down to the first Blue board.. If anybody gets an answer to this it would be really appreciated

[@goaway73]

Wow this has got the craziest example ever certainly there must be a simpler way and one that's not got a hundred wires just laying around 😳

[@Najamg4]

Hi nice peace of work, good job

[@tugrulklc2824]

Hello Good health, but why do you say the card information is missing? We would appreciate it if you made a more explanatory video. We want to do it too. thanks

[@gordonhope9219]

Can you please clarify if ALL shift registers (including the one on the ANODE board) feed their signal from Pin-9 to the following shift register? The reason I ask is that the schematic does NOT show the shift register on the ANODE board as being connected to the first BLUE cathode board. Also, the Arduino data pin shown on the schematic is NOT being bussed down to the first BLUE board so how does data get to the first BLUE board???

[@mehmetsafak1157]

Öğrendiyseniz benide bilgilendirirmisiniz?

[@lo0nyk]

enormous work. Well done

[@laurentmarion165]

Hello, the transistor of the video is not a 2n3904? you connect the 1k resistances from the base of the transistor to the source of the mosfet and the collector at 74 hc?

[@xrbr]

Hello. I am a beginner in electronics and would like to confirm that pins 11 and 13 of CIS U1 and U2 are correctly connected to the arduino. Because of all the other CIS, 11 is inverted by 13.

[@TechSan1]

Dear hello good observation I have also made this cube but facing some issue like u I’m also not an electronic Engr but after seeing number of time his vids I noticed that As per schematic drawing there is no vcc and gnd to transistor circuit of individual 595 ic. But in yt vdo power supply is given to all Is VCC and gnd to be connected to all 24 transistor circuits ? further whether all shift resistor are required to be connected to 5v of aurdino board? Pl respond and Co operate I had also requested to provide schematic and code for testing of boards.

[@fredziegler]

what work! magnificent! well done!

[@s.bgaming3042]

Hii sir please reply😢😢 mera pass ak rgb led cube code hai use code mein error hai kya thik kar paoge..

[@rosrobotics]

Bro Cathode control Boardil Transistors onnum Power ilek connect cheythitillalo circuitil.. GNd or +5v ilek Kodukano?

[@rosrobotics]

Bro Pinne Anode control Ic nu Serial Output Eduthit Cathode IC lek Serial Inputilek Kodukande?

[@mehmetsafak1157]

Yazınızı biraz daha açıklayacı yazarmisiniz acaba?

[@keymaster2108]

A++ for effort and result and good video

[@ronamedee2475]

Upon compiling "TCCR1A" was not declared in the scope ?

[@donaldhenke2750]

looks good.nice and straight.

[@rajukanna309]

super sir ,I saw u r video many times do like this many more projects

[@ElectronicsDemon]

i am trying but busy with work

[@semeehamaksub3722]

@@ElectronicsDemon can we programme some illusions ? Like showing some alphabets or logos

[@VE3DAL]

I like your work! In your schematic diagram you have on the Anode board Shift register Pin 13 connected on the Arduino Pin 04 and the Blue layer 1 as well, but after that all the others Shift register Pin 13 is connected on the Arduino Pin 13. Can you verify please, thank you.

[@r.m.m.pchandrasiri5902]

hi, i am working on 8*8*8 normal led cube. can you tell me how to write "sine wave function"(ripple effect ) function .

[@DhruvSharma-s9b]

Can I use common cathode RGB LEDs??

[@AndeanMusicinMoscow]

Super

[@jack-bjorn]

Wow, this is really so well done and easy to follow. Thank you for making this video.

[@kkumar-kkr7727]

Excellent project bro.

[@stevewalker9888]

Very therapeutic watching. Music annoying. Great project but how do you hide all of the pcb’s to make it all look awesome ?

[@ElectronicsDemon]

small wooden box on bottom😀

[@varruntinku]

Hi sir, Can we use the same method for 16×16×16.

[@ghh4445]

anode is positive and cathode is negative lead?

[@jackhope45]

Nice project... Did you know how many hours you worked on this?

[@ElectronicsDemon]

A lot

[@FardinAmiriSF]

bro can you give us the test code for the first finished pcb

[@andrenewcomb3708]

I actually have no idea what I'm seeing. I recycle and have torn a lot of things apart for the copper. Would this be considered 'primitive' considering what's being done with chips, shelacque, wafering, etc.? Could we be looking at development of 3-D television? Throw some spun fiberglass, cotton candy, crystals in there and use auras to create ghosts? I'm guessing that the programming is another matter entirely in how to get these crossovers to function for desired effects (Microsoft)? Reminds me of that movie about Steve Jobs and they spun a few moments of him swimming through numbers & concepts . . . and then Wozniak accusing him of not even being on board. Interesting stuff. Thanks.

[@JohniStein]

💖👍🔥 thank you for sharing the method

[@mitheshjain6228]

Bro your project is really good I am also making one with your project as reference . In the transistor circuit you had made a different connection in the circuit picture and on the board there is some other connection . Please let me know which one to follow. Love you bro

[@ElectronicsDemon]

i bought same part number transistor from two places.but they both have diffrent pinout so i changed that in pcb circuit is same

[@mitheshjain6228]

@@ElectronicsDemon thanks buddy for your help

[@aabb-zz9uw]

I wish the cube wiring part would be available as a ready made unit. I can't wire up the whole thing due to weak health

[@komokaziboschetti]

Ebay is your friend. Auracube

[@1e1g1i1s1]

Hi where you put yellows wire to arduino or other suply

[@solongu]

the power u use is from the usb ?

[@sampath2418]

I have common cathode rgb. How to make led cube.

[@pepeveraz927]

Que madera usas para hacer las plantillas

[@samyecheverria4388]

WTF !!! Well done, man!!!

[@aungchooo2411]

I am doing like this at the moment.I wish i saw it earlier❤️❤️❤️. Do you have adjustment code for 2D? Cube is expensive and i don't have soldering skills like you.

[@3dledcube-lawrence460]

u don't need soldering skills: How do u think of :kzbin.info/door/sXl6ZlUhcbpQDTV49XPROQ

[@3dledcube-lawrence460]

u don't need soldering skills

[@AnilArya51]

I hope you are from South India 😁 That too from Kerala.. am i right Sir

[@ElectronicsDemon]

Ya

[@AnilArya51]

@@ElectronicsDemon I am also from Kerala.....( Palakkad )

[@pranavspillai1241]

kerala power big fan sir

[@arduinotech1374]

what if i use COMMON cathode leds

[@albertmetts134]

can someone explain why it was okay for his different components to all be combined in a single line of solder. I thought that would mess up the circuit.

[@OrigamiMarie]

It's because of the way the neutrals work. The colors are each vertical, with the neutrals horizontal. Only one level at a time is activated by the neutrals, so while the whole cube has current for a single layer at a time, only one layer is active. It flickers a little because it flips between layers in a sequence.

[@sknrp]

Wonderful Project, thanks for explaining so nicely, brother please provide details of power supply rating, if available online please share link.

[@ElectronicsDemon]

i used pc smps ,5v 5a enogh

[@renepina5474]

Cool I like it I would buy it

[@haroldfamor3331]

Thank you so much buddy, deserve d a subscribe

[@allinone-tech2471]

Hello sir can I am reduce spacing between led cube

[@sauravgupta0879]

Can u please provide thr gabber file for the project

[@zueiradotempo8856]

Gostei do Projeto . Very good . From Brazil .

[@TheMahe244]

Excellent, can you please upload the jigs dimensions

[@madugulasankararao7409]

Really super

[@ElectronicsDemon]

Thank you so much

[@ulisesdiaz1821]

a query if I want to replace the transistor 2n3904 (of the platelets of the catados) with a transistor 2n 2222 could only change it or I also have to change the resistance of 1k and 100 ohms?