How to Make a Bandsaw at Home

[@tarmac245]

A well made video. No wasted talkathon . There are faults in the design but the presentation itself is a good example of how to put a video together.

[@gnillut]

What about bearings for the wheels? What about blade wear from too tight bend radius? What about blade tension?

[@thuglviz]

what about the blade tension.

[@DonJohn87_YT]

Yeah this just shows the basic principle (as many other videos) but blade tension is imo also a part of the basic, and wouldn't be that hard to achieve

[@simonbrown3943]

you could add a simple blade tension system on the middle wheel if you put the bushing the the wheel blank and have the spindle spinning free. Two horizontal slots with springs or strong elastic bands pulling the spindle back in the slots..

[@timebender_]

off you want a more in depth video check out matthias wandels channel

[@lokkko1248]

So dangerous...

[@TheBlakemt]

Not really

[@majidalamri5328]

Simplicity is good but blade tension is required and blade guard for safety Overall, well done

[@franciscomunoz8991]

Como idea esta bien ,pero te falto hacer un sistema para tenzar la sierra de cinta

[@rustywoodpecker8191]

Cool. Can you now make a machine to sow my fingers back on. Thanks 🤔

[@buddhichampika5823]

most of the bandsaws are like this if you cut your fingers with something like this you shouldn't be using power tools

[@chrishayes5755]

@@buddhichampika5823 that blade is flopping all over the place lol

[@drawinaminutewithdr.rajasa8861]

Just use superglue

[@cristianopachecoluiz7376]

Ficou muito legal da para se notar muita criatividade, principalmente por ver essa parafusadora caseira, porém essa Serra fita precisa de mais segurança. Já trabalhei em lugares que tinham Serra fita profissional e que mesmo esticadas as vezes escapavam. E se tratando de Serra todo cuidado ainda e pouco, um erro pode lhe custar um dedo ou algo ainda mais grave. Desde já essa é uma crítica construtiva para sua própria segurança. Tens um futuro brilhante e uma inteligência incrível.

[@marcosalazar5339]

I never liked my fingers anyway, ill take 2.

[@BarBarian-sy5xz]

Excellent job man! I’m gonna attempt this build.✌️

[@simonbrown3943]

love the idea rough and ready but it works shows design does not have to be too complicated... One question how do you track the blade have you had any problems with it wondering and cutting into the side pieces?

[@melrosehawkins8294]

I think he installs the guides at the 5:40 mark, I believe. Interesting build but I question how it is going to hold up over even a short period of time.

[@MultiTom1956]

yes, the same question :-) how do u tighten the blade?

[@wrosebrock]

Make it tighter

[@MalenasBazaArte]

Very easy....I'll make one in my next life!!

[@Wood_and_metall.]

Задумка не плохая 👍 но я бы установил натяжитель для ленты☝

[@oenieke]

Awesome simple design. Kudos to you for thinking it out. I love the simplicity

[@frankdeegan8974]

So wrong in so many ways but, it is a working machine. Now how long does the operator keep all 10 fingers. I like machines and I just might make one close to what this one is. I don't think I would use it very long the way it was presented here. I am all about research and development but don't exceed the limitations of my medicines.

[@KBBAKTHA]

wheels are having plain shaft of 6mm or so and you put hex nuts for mounting,how does a plain shaft rotate smoothly inside a threaded nuts?

[@rahilshaikhelectronic131]

Where to buy the blade? Links

[@GoldCobra487]

Grizzly tools (Google them) sells pretty good blades for a competitive price, the really good ones are under the brand name Timberwolf.

[@wolleytoons]

what do you call that machine you use to cut the wood?

[@Thunder-dd6js]

how are u holding that hammer?

[@banjoesnongbet8303]

Where can I get this blade?

[@piotrnapieraa5422]

👍👍👍Super 👏👏👏

[@pakcom-vl9kd]

How about coming up with an idea for this saw, (Taurus 3 Diamond Ring Saw)

[@raulvaldieguez6534]

where do you buy the motors?

[@matteedstrom]

It's a fucking drill that powers it!!!! Did you even watch the video?

[@mdftrasher]

Dangerous, but if you dont care about your finger, its great!

[@luislist1564]

Very good project maybe try stabilizing the blade for a steadier cut

[@DonJohn87_YT]

I think the main issue is that the blade isn't under enough tension

[@powderriver2424]

I give this guy credit I seen good homemade bandsaws but this would work in a pinch accuracy appears a bit off but that can be overcome that old drill is getting a workout..Lol

[@kamaruddinkamaruddinmamat7691]

Simple and not bad, can do the improvement for a batter user. Thanks for your ideas

[@hazemfatehy2260]

Hmmm, what can go wrong?

[@greasysteve5671]

Hazem Ali what cant go wrong?

[@jimmesser4412]

Tensioner would be be good, and changing the blade will mean taking a lot of that apart. But still like the fact that it's a working band saw for the price of the blade and wood.

[@noahsduck4109]

That's so smart but yeah maybe add some ball bearings and blade tension cause that's a little scetchey

[@uncletoy774]

Not bad dude but got to have tension and not use a 3 wheel design as they have a tendency of snapping blaades. Discovered this the hard way having bought a delta version of a 3 wheeler

[@imanamal5522]

Nice idea..how about a dimension blade you use?can you mention the width,length,thickness and the teeth of that blade.. thanks :)

[@nitinpavaskar3851]

Where to get the blade?what is the price?

[@mogbaba]

Very interesting. I clicked on the link to your site and felt I am in heaven. many good ideas and perhaps many hours works on me, thank you.

[@martinpanev6651]

Well, it looks like somebody has not been watching matthias wandel

[@allysilver7048]

So true lol

[@arturodelosangeles]

where to get the materials?

[@ehzia7596]

where to buy the band saw band\blade??

[@matteedstrom]

You forgot the blade tensioner!!!

[@manuelolea3057]

Buena tu idea pero poco segura

[@sureshkumar4140]

where is the adjustment for blade tension

[@luthfimebel2678]

Nice.. 👍👍👍

[@roltol7539]

this is not usable belt woble is so bad... wtf..

[@rfhero71]

Blade needs more tension. I think. BUT, incredible!

[@mohammadesmael8900]

Nice work Sir, but a little I observe that the blade is loose. By the way Sir where is your address? Thank you.

[@inalarajesh6086]

Tell me the blade details

[@bhupendradesai3402]

Nice can u sale or make for me where r u. I have drill machen.price without drill machen.please reply if any yes or no.

[@swamiramula2089]

Hi. Can you think low RPM and make this as fish cutting machine.. I searched for fish cutting machine but all are waste..

[@joewoodchuck3824]

Too much criticism. I'm so gonna make one - with a few changes.

[@ronaldherbert9098]

How to tighten the blade

[@TheWeirdSide1]

Blade will slip like crazy...changing blade takes a day and a half...still better than nothing I guess.

[@edizonpinelapibaque5155]

Hermoso paisaje muy lindo el canto de los pajaro el sonido del Río la naturaleza es bellísima

[@luisfernandob9798]

solo faltó el ajustador que sería en la tercera rueda pero muy bueno😃👍👍

[@ledmarcos88]

só não ficou mais perfeito por que você não colocou um esticador para a fita

[@thenightwhisper2872]

very good idea,i hope i could make it

[@mazinhomattosfreire3832]

Perigo, não faça isso em casa. Segurança zero. Perigo 100%

[@tarsemsinghrana9716]

Good job sir

[@SimonBarnsley]

Making tools from a shipwreck. I love it!

[@upenrabha8464]

how to shoping your blade nice idea

[@hidgik]

where did you buy the saw blade?

[@severinadaguiasilvia6300]

Boa tarde vc poderia dar as medidas de tudo que vc corta e a distância dos furos um do outro

[@adolfotapiagallardo]

excelente solo falta la guía de cinta en la parte del corte

[@Freakopac]

safety is number 10 priority

[@WaheedRafiq]

I like it well done

[@marksullivan5563]

Have you contacted Dewalt to see if they want to patent your plans ?

[@Rampalsainika9410]

Wow very good

[@LuisFernandez-zb2gf]

Buena idea, para perfeccionar la tensión

[@EliteSniperFMJ]

tension, tracking, upper blade guide???

[@mikhailkonstantin9927]

you must make it balanced man ! take care of your hands !

[@vdsmade]

Great 👽👍

[@tefiri]

Matias Wandel should watch this.

[@yspark5930]

아재요 솜씨가 대단합니다. 한국에 오시면 막걸리 일잔해요.

[@mekiiw7587]

very very good idea thank you

[@marccarre7525]

Pas de guide pour la lame sa doit pas être terrible les coupe

[@mkkn3240]

Very nice machine

[@كمالالدين-ث9و]

فنان وربي بس اكو بعض الاشياء انشالله توضحها اكثر

[@Baywatch318]

the blade wobbles a "little"

[@imwhatim7259]

*Little*. Hahahahah. ....

[@marcospulti817]

DONDE ESTAN LAS MEDIDAS

[@syedsabeerahmed4107]

how to make mini TV please tall me

[@jamessmith409]

very raw design,great so simple and functional tho,,,great job

[@АлександрС-н2м]

Много что можно доработать,но главное что просто и работает(а регулировку натяжитель и тд кто дофига инженер может сам добавить

[@ebikebatteryrepair]

that does not look safe sorry

[@anuragdey3455]

blade not running smoothly,can cause accident.

[@angelopezz]

Skiller band saw... Lol great idea but safety require...

[@renemarroquin4233]

Very good

[@carlosdainese830]

Parabéns muito bom.

[@costabraga3954]

Fantástico meu irmão, gratidão pôr compartilhar!

[@000000009373]

Muito bom......parabéns pela criatividade.

[@JCARLOSDECSILVA]

Danger. Muito perigoso. A serra vibra muito.

[@joseantoniobarrocama]

o gaijo estava bebado

[@linderulisesbocanegralopez5857]

asi es mucho vibra..mucho chicotea es peligroso..

[@ShayanQuanta]

Can’t find any video “Build a bandsaw without any tools!”

[@JorgeRodriguez-jn2ww]

Hola Tamaño de la cinta, es: ?

[@MCsCreations]

Fantastic work, bro! :)

[@juancarlosreyesalbert8154]

hola buenas tus ideas me gusto tu diseño felicidades

[@cescaunbeton8774]

Perfect If You feel like you have to many fingers

[@HorstramWieljentic]

Put simply, you are saying to buy an entire woodworking shop to build a small saw? 🤣🤣🤣

[@abdeljalilpr2033]

Thank you nice work..Please do videos without music..just talk and explane :)

[@violetartem1034]

abdeljalil pr *explain

[@ellobosolitariovaldivia7369]

Espectacular hermano

[@joaquimlemesdealmeida1474]

Muito criativo, isto sim que se faz.

[@AndysOutdoorAdventures]

There's no safety aspect at all, technically its very badly done, no bearings means quick wear out and no blade tension definitely results in less blade stability.

[@ravebrave8866]

man the blade is wobbling

[@mardakworkshop4450]

i will build one it’s good you give me some ideas 👍🏻👍🏻

[@metalmecanica8948]

Está bien lo felicito ,la voy a hacer en metal, gracias

[@afzalbodiat9538]

Hi.navin please give me contract no.i want to meet u.