How to Make a Carbon Fiber Car Bonnet/Hood - Part 1/3 : Making the Mould

Project page and complete shipping list at:
www.easycompos...
Incredible series of advanced composites video tutorials showing exactly how to make a professional carbon fibre (fiber) car bonnet/hood. In Part 1 of the series we demonstrate the process of making moulds for the inner and outer skin by using the original steel part.
Full details of this project including links to buy all products at:
www.easycompos...
Starter kit containing all of the mould making materials:
www.easycompos...

[@henrycollins2478]

I have work due in an hour, and I’m watching this. Nice work self!

[@howacarworks]

Best quality video from 2012 I've ever seen! Great explanation. Clear, detailed. Spot on.

[@invictusaeternum]

would've never looked when this video was uploaded until you pointed it out. you are so right tho. this video is quality.

[@gtronin2631]

Calculating how much time this takes, price to be paid for ignoring wife and family. How many shifts of overtime it would take to buy this.......looks like I'll pick up a few shifts of overtime and have this delivered when my wife is gone to visit family.

[@habib1971]

If you can put it on a separate card. One she can't see so you don't get caught.

[@MovingToMnPro]

Definitely a project better saved for items that aren't commercially available

[@charleswhitfield8915]

On that basis you’d never find a lawyer mowing the lawn!

[@CarsCatAliens]

And the price of possible failure.. not worth it.. fiberglass on the other hand, cheap, easy

[@xlrationmarine]

😂😂😂😂😂😂😂😂😂

[@AyrtonsLoafers]

I recently started working in composites after working with metallics the majority of my career and these videos are invaluable. I just wish I had a big enough garage to do this at home. Thanks

[@easycompositestv]

Thanks very much, it's great to hear we're helping people.

[@BOY_NAME_]

Hello i know it has been 7 months but i just want to say

[@ohnobo14]

Worth saving 1,500 dollars to make my own

[@unclereeko8447]

I must say, I'm so impressed by the professional process used. I guess that's why you end up with the immaculate finish. Cant wait to see how the final product turns out!

[@shawnfoxfirth9684]

I would like to do as much of my car as possible , I have a '67 Toronado - nearly 5000lbs ! This video series has really inspired me to Replicate all the front end metal -Hood Fenders in and out - Rad support and the valences , Doors deck lid and I even would like to attempt to do the Body Shell ..

[@xnadave]

I really wish I'd watched this $200 (in materials) ago. :) Great series - thanks for taking the time to make these videos. I used hot glue to attach flange forms to my plug, but didn't put tape down beforehand. Because, hey, how hard can it be to remove hot glue? (ProTip: It's not difficult, but super time-consuming. Use the tape.) Also, filleting wax is freaking impossible to find in the US. I've found that a sulfur-free oil-based modeling clay works very well. It doesn't dry out, PVA will stick to it, and it's easy to remove from the plug once the mold is complete. (I'm not an expert - just making this stuff up as I go along.)

[@yelp1000]

The four videos you have on your channel are BY FAR the most intelligent, concise and in-depth I've found on youtube for how to work with carbon fiber. Thank you very much for all the effort you put into this series.

[@easycompositestv]

You're welcome. Please just spread the word about our company; we do these videos to share our passion for carbon fibre and composites and to raise our profile around the world. If the 100hrs+ we put into filming and editting this series helps a few people to make some really amazing parts (or even start a business) and gets us one or two links on forums and blogs then it's all worthwhile.

[@jdmwest4402]

Off course sir I will share your work. I'm trying to get out of poverty with this skill. Long story but I have a trade under me and I will rise again..I will help you also along the way.

[@easycompositestv]

Depends on the engine bay temperatures. A engine with good heat shielding will generally not be a problem as the air temp under the bonnet will not likely reach more than 60C. Some high powered cars may be higher so you need to check.

[@easycompositestv]

Yes, the mould can be reused dozens if not hundreds of times. We use Uni-Mould based moulds in our own workshop for some of our production parts and they wear very well. The more you look after them the better they will last. By having a good gelcoat finish you can also at occasional intervals re-polish the mould to take out any scratches or dulling that has occured with regular use.

[@crossbreedperformance]

What if I wanted to make an air vent, for example, like on a Subaru WRX ?

[@easycompositestv]

@@crossbreedperformance Do you mean at the same time as moulding the rest of the hood/bonnet or do you mean as a separate piece to bond on after?

[@crossbreedperformance]

@easycompositestv when I initially asked, I meant at the same time as moulding the rest of the hood, but now that you mentioned doing it separately I'm curious about that as well. My question on the second one how would I bond and blend it if I did it separately? Any shared knowledge on both ways would be greatly appreciated.

[@bigpower7777]

Lots of patience required to do this line of work. I could see why CF hoods and other parts are pricy because of the skill set and labor behind it. Good job dude! 👍🏽 keep up the good work you do. 😎

[@luciusirving5926]

Pricy but doesn't bend in the long run when collision happens.

[@xnadave]

@@luciusirving5926 Sure. It just cracks and shatters in much the same way as fiberglass or FRP.

[@Sgt_Rage]

@easycomposites these videos are a godsend. Never thought I'd be able to make my own carbon fiber parts. Thanks to you guys I'm halfway through a new intake manifold. Your in depth videos are easy to follow and saved me a ton of time and potentially expensive mistakes.

[@wilborth5th]

The human mind at its best, magic, I absolutely love it, wowwwww

[@easycompositestv]

You're welcome! We're working on some more pretty exciting professional carbon fibre tutorials so keep an eye on our site and this channel!

[@affenjunge1615]

Have you ever tried using a ball stylus tool to smooth the clay/wax to a smooth an even fill? Comes out looking like brick mortar and you can match the ball size to the curve needed to prevent locking.

[@easycompositestv]

@@affenjunge1615 Yes, in fact we now stock and supply Ball-End Wax Filleting Tools.

[@footballera-i2p]

Look mate i guess ppl need your whatsapp number. Well i need it anyway

[@Mikej1592]

I love the video, it gives me a new appreciation into why carbon fiber parts are so bloody expensive. I wanted to make parts for my old 82 LeSabre, Buick, just to be different and improve it's economy but had to sell the car. I was slightly regretting it when I read the title to this video then I thought, holy hell you used up like 8 sheets of fiberglass matting, chopmat, and you haven't even made the part yet. I would have rather just stripped the parts off the car, sent them to you and have you do it because to quote another American, "ain't nobody got time fo dat (Kimberly "Sweet Brown" Wilkins)"

[@easycompositestv]

It is a time consuming process but as you have seen, the results can be stunning. For many individuals, the "cost" of their own personal time is well worth it, versus the cost of buying or commissioning someone else to make the parts.

[@Mikej1592]

I know the feeling, when I would tear down and rebuild the top half of my own engine then to hear it fire up on the first try was quite the experience, dropping off a broke down car then picking up at a shop running again just isn't the same.

[@boulders32]

9 no NJ moo y bl ki6

[@mightyeagle]

I watch this a couple times, but after you get your head around it, it’s really not as tough as you think you have to watch a couple times and you can understand all the aspects very easily

[@easycompositestv]

absolutely; if you break it down into the separate stages/tasks, it isn't so daunting.

[@dcaonoek]

"the most ambitious we are ever likely to take on" - After watching your recent videos! lol not likely... You guys are awesome!

[@easycompositestv]

Yes, looking back on our humble beginnings (check out the CarbonMods channel for our very earliest videos), we've come a long way. We're trying to get the balance though so expect some more home builder/DIY videos alongside the more complex ones moving forwards, especially as technology and equipment change and become more accessible :)

[@dcaonoek]

@@easycompositestv I genuinely can't wait I've got a couple of ideas I'd love to try.

[@stoweby]

Old video but you're doing a fantastic job as a teacher and this has aged very well. The methods are pretty much identical when it comes to aircraft composites. You could probably take this video and teach new aircrafts structures guys how to do the basics of composites with this.

[@easycompositestv]

Thanks Stoweby, I reckon there are quite a few composites professions that use this video (and several of our other ones) to introduce apprentices to composites processes! We’ve done an updated infusion video very recently and we’ll probably be doing some more soon as well.

[@stoweby]

@@easycompositestv Excellent! I'm always interested in seeing how composites technology has evolved over time. I have you guys saved now that you've come across my feed. I wish more people knew how fun it can be to do this with a little practice and patience.

[@easycompositestv]

That about sums it up! So long as you have the information in this video then every step is perfectly achievable and should work just like it does in the video, there are just a LOT of steps to make a top class carbon fibre bonnet/hood like this but it's an amazing project to undertake and the finished product would be better than almost any carbon fibre bonnet/hood on the market (bulk manufacturers cut LOTS of corners).

[@ilikefishing7858]

how much would it cost to produce a pair of moulds to create a pair of carbon fiber front wings for a car? something I'm interested in doing. or a cnc mould?

[@easycompositestv]

@@ilikefishing7858 The mould cost can vary greatly depending upon size, shape and materials/process used to make the moulds from.

[@ilikefishing7858]

@@easycompositestv best suggestion?

[@easycompositestv]

@@ilikefishing7858 Depends on size of the wings, moulding materials used eg a traditional composite mould may only be a few hundred pounds, CNC billet tooling could be thousands

[@stevensprague2148]

One of the best instructional I've seen across all subject matters, thank you for taking the time to do this!

[@easycompositestv]

Thank you Steven, we enjoy making these tutorials a lot.

[@ovalwingnut]

Knocked it out of the park! By far the most detailed, professional, well thought out and executed training video on producing (complex) parts I've seen on KZbin to date.. Thoroughly inspiring. And this is from a "supplier"? Builders take note.. This is how you do it, IMHO. String a few of these vids together on DVD and the only question I would have is "where do I send the money?" :o) Companies like this deserve our business. I'm in the US but will be looking to Easy C. (in the UK) to "help" me get started. This is not the type of process where you want to skimp on price or talent. GR8T job guys (and gals). Really appreciate it. p.s. Thank God there was no music :o]

[@jibmediaconcepts8827]

I Must agree... i was well educated and informed about the process... hoping that one day i can make some Carbon parts for my 2017 Elantra!

[@guyrodges244]

That looks like it takes a lot of patience, but still looks pretty easy watching him do it. We'll see what making the actual part looks like. Well done and using proper clear and concise English. I'm just glad the guy is not from India.

[@flowerchild777]

@@guyrodges244 I know what you mean. I don't dislike people from India, the accent, I'm sorry to say, is too thick for me too

[@skakpedersen]

OvalWingNut While watching this video, I was planning my comments, but you took the words right out of my mouth. Well spoken and good luck to your business.

[@raffhelm4635]

Nice , my old work...i work long time ago with production yachts , spoilers for cars , sand box for winter time..🇵🇱🏴󠁧󠁢󠁷󠁬󠁳󠁿👍

[@VforValenti]

You completely nail it! I wish I had someone like your company in my area...

[@geoffreymills9932]

Anywhere that builds boats could help you

[@geoffreymills9932]

Anywhere that builds boats could help you

[@user-njyzcip]

That pop when he released the mould was so satisfying

[@DawidNiespodzianski]

Now I know where to buy my materials for boat building. ... perfect

[@liamhollin8265]

Thank you for sharing this knowledge. I do alot of concreting and shuttering, this is mostly the same principles. I fully understand. Thank you very much👍👍👍👍👍👍

[@CineGui]

man is this hard work . awesome instructional video!

[@ANDREWCH1LLS]

The most complete mold making tute I have ever viewed. Thanx-a-million.

[@Neudezign]

Thank you so much for creating this video series. I've always wanted to see a simple straight forward explanation of how this process is done. This has really got me excited to try this myself someday.

[@skmt432]

It is a way of explaining how to make corbon fiber cor bonnet molds as a step by step process. If possible, I would like to ask for more, explaining the components first and the mixture of chemicals mixed before the lecture. If possible, all brands of chemicals used to do this. Finally, the summary of this cost

[@easycompositestv]

The video covers all the process you mention. If you watch the video series through our Easy Composites website, we have a product list next to each video showing you what was used. You can find the first video here: www.easycomposites.co.uk/#!/composites-tutorials/make-a-carbon-fibre-bonnet-hood-part1

[@debeerpaul]

19:30 When you hear that sound in a staff meeting don't move.

[@the_3rdKind]

Hilarious 😆

[@dustinjefferies8482]

Came here for this

[@PLK123]

lmao

[@AboutComposites]

carbon is future, strong and lightweight, thanks easycomposites team for sharing their knowledge!

[@unclestephendtech154]

You know what kind of material for making fiver plastic

[@easycompositestv]

When watched through our website, we have a shopping list of materials next to the video.

[@martinoporto8676]

The list is not working. Please, check it out! Thanks! 💪🏻

[@nicholasbehan]

Helped me significantly with my IYRS capstone project!

[@easycompositestv]

The mould making process (as shown in this video) does produce fumes, you need good ventilation and you could also wear a mask. At normal low levels it's not dangerous. Making the part itself (the resin infusion) is low risk; good ventilation should be adequate. Trimming the part requires (video 3) requires a good mask because you're generating lots of fine dust. Take a look at our new cutting safety video if you want to learn more about masks.

[@easycompositestv]

Yes, that's what I was talking about. The original hood will certainly come out of the new mould no problem but because I ground off the latch and hinge-pins then the original steel part cannot be fitted back on the car (it was only £50 off eBay anyway!). If you want to keep the original in a condition where it can be put back on your car then you would have to work around any bolts or catches which is perfectly do-able but a little more awkward.

[@jakobv8]

Fascinating film, but I was totally confused when I saw him laying fibreglass sheets on the part until realised that they were only building the mold :-) Well, off to part 2 then...

[@A-DUBCLUB]

Man i like how this guy work. Hes generous with everything.. its never too much

[@GauseyYT]

insane how an 8 (going on 9) year old video series can make me better than newer videos. Videos like this make me happy that i don't have to go to college.

[@martinoporto8676]

For real.

[@easycompositestv]

In this video we're using a 200g 2/2 twill 3k carbon fibre for the visible layers. We use a Lantor Soric SF2 core material on the top skin and for the inner skin we use the 2/2 twill 200g fibre again backed-up with a 650g 12k carbon. When you're laying reinforcement into the mould dry it should be quite easy to keep the weave nicely aligned. It normally gets distorted in a wet-lay process when you're pushing it around with a brush or roller. You don't have that problem with resin infusion.

[@salemcolina4170]

i like the English accent,might help with my IELTS exam :) but i agree great workmanship !thumbs up

[@PaijoUtomofarm1778]

Harry pother

[@easycompositestv]

Good laminating procedure mostly. The fact you are using the coupling coat and the fine CSm will help ensure the coupling layer conforms tightly to the gel thus limiting chance of air voids. Also copious use of the roller helps get air out as you laminate.

[@KamarulAzlanAhlengChai]

please do some difficult parts like front bumper.. thanks

[@gariG2]

Fantastic! Professionally presented, clear and precise. I wish all KZbin tutorials were as good as this (no naf music or egotistical waffling host). I’ve subscribed and I will be buying the products. 👍👏🏻

[@johnslagel1015]

well said! I couldn't agree more!

[@easycompositestv]

You won't have to wait long, they're all uploading to KZbin right now... Part 2 is already online!

[@DrPeppa]

Last night I some used JB Weld to seal a crack on one of our taillights, so now I know all the ins and outs of epoxy and resin for car applications just like this guy! 😂

[@DjRjSolarStar]

Very interesting, though I'd personally use vacuum forging to get the shape and would only make one mould, while creating my own structural reinforcement for the other side instead of using the stock one.

[@craighepworth7353]

DjKinetec great if you're using it once but this is deffo the way to go to ensure the structure of both your bonnets and the mould for further use.

[@easycompositestv]

In total we used about 20kgs of the Uni-Mould resin, 7kgs of chopped strand mat, 5kgs of the coupling coat and 5kgs of the tooling gelcoat however this is a small part (a FIAT 500) and a larger part would require more resins and glass. Remember that we made an inside mould and an outside mould.

[@davidhenderson6748]

Excellent video, kept being drawn away by your sign maker's misspelling of "Highly competAtive pricing." I guess he's trying to make you stand out from your "competation".

[@easycompositestv]

Great, that's what we want to do. In times like these it's great that we can be involved in getting some great businesses off the ground. We supply lots of people who have done the same thing and are now making some great parts which is good news for the whole scene.

[@ΖησηςΤουρτσινη-θ3ο]

Γειά

[@prk5339]

Someone tag B is for build in this video

[@franciscomartingallardoboc6945]

Gracias por la demostración de cómo hacer un molde, incluyendo la corrección de errores. Didáctico!

[@VacFink]

Very informative and well presented.

[@bertfriedman]

I think this video is awesome and has helped further my carbon fiber understanding.

[@easycompositestv]

You're very unlikely to get bubbles in your gelcoat; I can't think I've ever seen this. In this video we spray the gelcoat; if done right that can put it down very smoothly and bubble free. The time you wait before infusing the resin through would depend on the gelcoat you're using (remember, you can use NO gelcoat and it will work just fine). For the GC50 we used in this video the correct delay would be between 3 and 24hrs.

[@SALTYDATTO]

INFUSION!...Don't worry, that's not the only thing I took from the video. I found it extremely informative and helpful!

[@danielsolce3448]

How much would all the parts used here (excluding the steel hood) cost?

[@guitariste47]

i guess a lot.... I am going to make a glass fiber bonnet, but in a much more simple way.... i hope it is going to work....

[@Porthin]

Daniel Solce use ur own steel hood

[@DaniellaB1977]

+altheeb - 100% Agreed! Time, $$$, Labor = NOT WORTH IT !!! LOL

[@MrDragonfly]

A roll of CF sheet can cost ovee 16k dollars

[@MegaMuthatrucka]

you can get 3k carbon twill weave for $16 a linear yard. you could make the hood with about 6 yards. not that bad...

[@ekanurhairi9493]

hi..I'm from Indonesia,I really like your videos,very useful..success for your channel

[@TATTIEPICKER]

Who is here because it was recommended after watching b is for build 😜

[@camarocharger8180]

Just watched that video and the very first comment recommended these guys. And now I'm here like you.

[@chrisfinkbohner]

@@camarocharger8180 but B is for build is doing it wrong. I told him about this place.

[@stegoeggo]

Ayeee

[@Teamotoring]

Here 😂😂😂

[@Teamotoring]

Chris Finkbohner I realized I’m 17 hours late are recommending this link 😂

[@easycompositestv]

@PatruDragos I'm not sure I understand the question, if you want to make a fibreglass copy of your bumper then you will need to make a mould first (like we do in this video) and then you can make your fibreglass bumper using traditional fibreglass materials. Lots of curves should not really make much difference.

[@midwest4416]

why polish the wax if the purpose is just a release barrier?

[@easycompositestv]

Why polish the wax on the part or polish the wax on the barriers? - We polish the wax on the part to improve the release (shiny surfaces release better than less shiny ones) and also because the quality of the finish of the wax will be the quality of the finish on the part. If the wax isn't shiny then the surface of our part won't be shiny.

[@alejandrooreggioni5335]

Easy Composites Ltd

[@ahmedoufkir8235]

I'm a specialized technician in the transformation of composite materials and i' m looking for a job , please if you have any information to help me contact me ; [e-mail]

[@jamesb4555]

And if you don’t remove all the wax it can stick to it

[@gregwebster8784]

James B no, it'll just leave streaks or haze in the mold. The resin can't stick to the wax.

[@nasraqcoffeehub4723]

It's so wonderful en done in a confined space

[@michaelkowalski4831]

loved the video and thanks for posting. good coverage of detail shots too. also, because I sometimes channel an ancestral spelling nazi, I gotta cringe when i see professional marketing that overlooks misspelled words. (on your marketing board behind you, under "buying made easy" the word competitive is misspelled.) makes your marketing team look sophomoric. seems a small complaint in light of the artistry in the molding work, but... devil in the details, i guess. thanks again for posting.

[@easycompositestv]

@Fieldpaint haha! It is the same white polo, for the messy stuff (like the trimming at the end) I do the first bit then step out and let someone else finish it!. The rest is all pretty clean.

[@gmax876]

Isn't this more like fiber glass though?

[@easycompositestv]

Some of the basic techniques such as mouldmaking are very similar to what you would use in "traditional" fibreglassing. However, resin infusion is not such a traditional technique. It could be used quite successfully with woven fibreglass as well as carbon fibres.

[@williamduffield4964]

Yes fiber glass moles to build a carbon part in to get the shape. Epoxy resins are so easy to use with glass and carbon.

[@AudioTones67]

I think this was the first EC video I ever watched, and now it's 10 years old!

[@easycompositestv]

There were actually a few videos prior to this one as well; only one on the EC page but a few more over on our CarbonMods days. We've come a long way in the 13 or so years we've been producing these tutorials and there have been some wildly changing hair styles!!

[@dominicandawg3455]

Do u guys ship to the US?

[@ideas66]

Very instructional and a good presenter, thanks.

[@hiquality_distraction4084]

@ 19:30

[@hiquality_distraction4084]

***** lol i forgot about this lol

[@anzachawkins2697]

Awesome making light wait molds step by step

[@glendooer6211]

Only job were the sound of something cracking is good.

[@thelazycat_]

What about producing crack

[@robc3056]

Yes i can now understand why its so important to wax the flange so well....All aside superb videos guys very well put together

[@easycompositestv]

Glad you enjoyed the video Rob :)

[@MrCosmo4life]

Looks like a new shape fiat 500 bonnet, probably wrong though

[@easycompositestv]

***** Yes you are correct!

[@TechGaming]

+Easy Composites Ltd what are you poring in with the gelcot and the other 2

[@McGyver777ATGMAIL]

For what this is, it is exceptionally well done.

[@bertoche]

19:31 lovely

[@Jesus-yz5iu]

19:31

[@RCrider185]

Great video and amazing mold work, u guys are 2nd to none. You blow Seibon out of the water with your attention to detail

[@joewontwice]

Who makes cf fenders for a b6 audi

[@chrisg4799]

where are u from ?

[@DJCallitquits]

Obviously these guys!! Haha

[@dons1932]

A fucking badass. That's who.

[@dons1932]

"Who makes a Lamborghini out of a tractor? ... oh wait."

[@timsigmon1177]

Me

[@kiplindsay8413]

Very nice. On to part two

[@easycompositestv]

Which is why we use a specialist catalyst dispenser bottle which has accurate measurements on the pouring spout.

[@easycompositestv]

@samedwards884 That's a Plastic Finned Laminating Roller. They've sort of replaced the old metal rollers used for laminating because the reason doesn't stick to them (they're PTFE) and the plastic roller won't scratch the mould if you touch it accidentally.

[@jdmwest4402]

Watching these videos makes me keep my workspace clean and wear nice clothes. It's simple to do this fibreglass work. All you need to do is be as nice and patience and well spoken like a 3M technician. Sign me up please. I'm from the GHETTOoooool!!!!!

[@easycompositestv]

Haha, well, yes, thanks, We do a lot of cleaning up in the background whenever the camera isn't rolling!

[@jdmwest4402]

@@easycompositestv beleive that anyday. Keep up the good work

[@easycompositestv]

@danthman123 if you're only making one and you need to make the moulds and buy all of the equipment (I.e. starting from scratch) then it will work out more expensive, not cheaper. The materials alone used in making this bonnet are around £450 and remember that's for a 100% carbon bonnet so once you have the equipment and moulds it will work out cheaper.

[@khm-projectsaltyfrog9231]

Fantastic series of videos!!!

[@easycompositestv]

Thank you, glad you like them!

[@R34RACR]

I always felt that making the mold was the hardest part, thanks for the tips.

[@mrfodi2]

its deserve the five star with out any comment really big thank i really like it-- going to watch parts 2

[@easycompositestv]

The mould is made from fibreglass using our Uni-Mould system. Thanh Tran, it depends how much you want to pay for someone else to make you a bonnet. If the design is not already moulded then you will get a shock at the moulding cost if you ask a business to make it for you. The advantage of DIY making a carbon part is your overheads are much smaller and your time is free.

[@vicentepons5301]

Wow, what a masterclass!!!

[@EricVWgolf]

Holy cow... im never doing this. take my money please you guys can do it for me LOL. Amazing video and really enjoyed watching the class. A+ content

[@easycompositestv]

Glad you enjoyed the video, appreciate the comment :)

[@easycompositestv]

You can in theory make most body panels using the same technique. More complicated parts may need multipart moulds or be made in several stages, but the principals are the same.

[@superart01]

LOL, Pam is a product we have in the states. It's basically vegetable oil in a spray can :-D. It's kind of like a release agent. It keeps your chicken from sticking to your pan :-D. Works very well for that. I don't know if it would be the ideal solution for composites though. Thanks so much for the videos, VERY informative.

[@iraira7467]

This gives me the idea to make so many different parts. Great job on Video #1. Now onto Video #2

[@Michael-xl8dz]

Wow, 10 year's ago we did not have blue tape?? Great vlog 👍

[@shanebeaudrot777]

Impressive mold production

[@easycompositestv]

Thank you for your comment!

[@unavailable8681]

Absolutely fantastic! I'll have to try this out once I'm done dealing with rust!

[@easycompositestv]

I wouldn't recommend spraying the resin during the tooling phase because it's very thick and would not spray well, by the time you've set up all the gear (and purchased it!) and then cleaned it all down after it would have been quicker and cheaper to just brush it on. The resin would still need to be stippled into the chopped strand mat and rollered after too anyway. If you're making something huge (like a boat hull) then spraying might be worth considering.

[@elpinchevicks]

the best HowTo video Ive ever seen

[@easycompositestv]

The rolled edge was a function of the moulding process. By careful placement of the flange and use of the wax, you can achieve the neat edge.

[@FragBenitez]

This is the best instructional video on KZbin, really really good!!!