I show how to make your own chain link steering wheel
Пікірлер: 22
@hanger67404 жыл бұрын
Just waiting for the first comment about welding on the bottle could explode 🤣🤣🤣
@epicspecialz60594 жыл бұрын
Mee to. Hopfully people realise its an inert gas...
@ryanward14384 жыл бұрын
@@epicspecialz6059 inert but still pressurised. Heating it will only create more pressure and could blow the top off surely ?
@epicspecialz60594 жыл бұрын
The walls are the cylinder will be about 5mm thick. You would have to heat it continuously for a long period of time for any heat to penitrate, also the cylinder will rated to at least double the pressure of the gas currently inside. So would take heating for hours to raise the pressure inside for it to fail. Plus im not applying heat directly to to the cylinder, my welds are away from the cylinder, so any heat transfer is radiated (there is an air gap) and pretty impossible to pose any risk to the gas inside.
@malsfisher35482 жыл бұрын
I knew it was going down hill from working on the floor to the traffic Cone then on to the old 200bar pressurised argon bottle jig “note the heat transfer through the highly heat conducting brass regulator that is only 2.3 mm thick 😅 slice an pry your chain link open also then close it in the vice one or 2 tacks will keep it closed ✌🏻
@RisingSonSpacelicker Жыл бұрын
I've worked in boilers where the boiler three down was still on (540°C) to do a quick repair and the one I was in was say 60°C outside temp was far hotter but was safe and got the job done that little bitty welding ain't shit don't worry KZbin comment engineers
@kevinfromdevon4 жыл бұрын
Nice one mate, love the cars that you build. Definitely subscribing, I hope this channel goes far. I have a fair few rwd micra build vids on my channel, I put very little effort into making the vids though 😬
@epicspecialz60594 жыл бұрын
Thanks man, awesome i will check them out as im loving your micra build.
@gerlandkent6377 Жыл бұрын
thank, you for you're video. Random vanners. east coast of virginia. 2%
@theMajTahal2 ай бұрын
I came here for the music!!
@DEATHMETALCYCLE2 жыл бұрын
I’m here for the welding on the bottle comments
@chris_purves4 жыл бұрын
Hope your sunny has power steering otherwise that's going to be a mission to steer! Great video keep up the good content
@epicspecialz60594 жыл бұрын
No it hasent lol. It used to but i removed it years ago as the rack leaked. Il just have to work out 😂. Thanks dude.
@chris_purves4 жыл бұрын
Haha ye when I was using my bluebird daily I had a daft wee wheel on it my arms were built like popeye's. Might give one a go alot simpler to make than I thought they would be
@Glatzomaniac2 жыл бұрын
It got the right size to drive with a pair of handcuffs on your wrists 🙂
@chevycamaro75456 ай бұрын
👍🏻👍🏻
@devilskullBEL4 жыл бұрын
Geez Bobbin, how will you turn your car with such small steering wheel? :p