HOW TO MAKE A DIY WALL MOUNTED CAT SHELF

In this video, I start a series of wall-mounted cat shelves for my Cousin Jennifer, who asked me to make her several different styles of wall-mounted units for her cats.I have shirts and more
patricksworksho...
This one is the Stair style and has three levels to climb up to their house.
The next part is in the playlist below Cat shelf playlist :
• Cat Shelves And More
check me out and follow me on :
INSTAGRAM: / patricksworkshop
FACEBOOK: / partricksworkshop
TWITTER: / patrickswrkshop
INSTRUCTABLES:www.instructabl...
LUMBERJOCKS:lumberjocks.com...
THANKS FOR WATCHING PLEASE COMMENT AND LIKE
SHARE AND SUBSCRIBE
CHECK OUT MY OLDER VIDEOS AND LEAVE ME A COMMENT
Copyright © 2016 By Patricksworkshop all rights reserved
Music that was used in this video :
Rock Tune by Audionautix is licensed under a Creative Commons Attribution license (creativecommon...)
Artist: audionautix.com
~-~~-~~~-~~-~
check out this awesome vid
"The most awesome chisel rack ever"
➨ • How To /The most aweso...
~-~~-~~~

[@JayBates]

You're stepping it up Patrick....see what I did there.

[@Patricksworkshop]

+Jay Bates thanks Jay i see u climbed up the comment rankings with that one ... u see what i did there

[@kimshirley7014]

Wife wanted me to build some floating cat shelves for out cats. I think this would be a better option! Thanks for the idea Patrick.. We have 7 cats and 2 dogs. We rescued a cat who had 3 kittens. Intention was to give them away but being the animal lovers we are we still have them 3 years later! Our furbies are family! Haven't heard in a while but hope Ice is doing well!

[@Patricksworkshop]

+Kim Shirley thanks for watching Kim Ice is doing good the cat stairs works good for the kitties next up is a cat ... lol thanks for comenting

[@MsAlison74]

hey I was wondering why you used the plywood and not shelf brackets to hang the steps? I'm looking into ideas to make a wall mounted cat tree/wall shelves.

[@izzyswan]

Nice one Patrick

[@Patricksworkshop]

+izzy swan thanks Izzy

[@suzanneanderson4631]

I smashed the Like button!! 😊 And about your video... I want to be your cousin!! So maybe you could make me cat stuff like this!! 😂⁉️ lol I was just thinking as I was watching this vid, for my next bf; I want one that has a workshop like this one so we can create a lot of things!!⁉️ lol Have a great day!

[@foxefoxr4609]

عمل جيد .

[@DebiRose062]

Just a quick question: You used brad nails to connect the pieces that you glued, then later you drilled/countersunk/screwed the same pieces together?

[@Fb33EYE]

Thank you, Patrick. Awesome wall shelf !

[@ILkaterlyn]

Looks just like Vertical Cat creations. interesting video for us cat lovers.

[@Woodtoolsworkshop]

Nicely done! I'm interested to know how the cats take to it. I have a couple who might like something like this, too.

[@Patricksworkshop]

+Wood Tools Workshop well according to my cousin, she says her cats are loving it thanks for watching

[@AwesomeWoodThings]

Can't go wrong with glue and brad nails. Looks great Patrick! Sorry... I mistakenly used gentle force while clicking the LIKE button rather than demolishing it as you suggested. Hope that's okay. Ha ha!!

[@Patricksworkshop]

+Awesome Wood Things ha thanks

[@rogerleslie4282]

Good to have you back Patrick.Keep the videos coming. Take care. Roger Barossa Valley South Australia..........

[@Patricksworkshop]

+Roger Leslie thanks Roger i will keep going thanks for watching

[@keith4154]

Thumbs up looks great. I want to create a similar shelf with just the treads and risers floating.

[@WoodenCreationz]

Meow did a great Job Patrick!!! Meow do you know how fast you were going In that video! Meow what's so damn funny? Meow do I look like a cat? Do you see me sippin milk from a saucer? Meeeeeoooowwwww!

[@Patricksworkshop]

+WoodenCreationz meow thanks for watching

[@ronpalmer1371]

Berk....

[@WesHamstra]

That's a great project. I don't have a cat but this project might be a good reason to get one.

[@Patricksworkshop]

+Wes Hamstra (Wes Hamstra Woodworking) thanks for watching

[@sparklefoxgamer9578]

wow patrick you should open a work shop and make stuff like this and sell them you would get a decent amount for them

[@tonibenedict5751]

Do you take orders for making these? It looks way too complex for me!

[@ChrisGlitzosWoodTinkerer]

Nice job, cats do like heights they think that they are... the kings when it comes to spying on you if not look down on you, if you know what I mean. I have two Persian cats at home and I have a project that I will be doing on my channel when the wood has the age of being outside for more 2 years. It is a certain look that I am looking for that I think, that you would like to make as well when it comes to cat stands. I give your Cat wallmount a Thumbs Up a very well done!

[@Patricksworkshop]

+Chris Glitzos (Wood Tinkerer) thank you sir

[@holdemNE1]

Sure would have liked to see them in use by your cat so we have a better idea of what the end product provides.

[@ronpalmer1371]

Very nice..........a horse could walk up them steps.

[@dogwoodtales]

one might say "better a cat shelf video than a cat video" - lol. You could have some fun with that by mounting the shelf to a stud on balance point so it wouldn't fall, but it would pivot on the wall ... I say I "could" but seriously speaking ... don't. I like cats.

[@SawDustMakerRJM]

Great job on the cat shelf Patrick. One question though. Did you use the screw you had behind your ear?

[@Patricksworkshop]

+Saw Dust Maker ha i totally didnt use that screw ,i found it later on that night still in my ear lol thanks for watching

[@rodriguesbob100]

Is that a Harbour Freight bandsaw in the back ground??? How does it work??? Is is worth the money??? Thanks dude

[@Patricksworkshop]

+Bobby Rodrigues hey yes this is a older harbor freight bandsaw with 4 speeds and i tuned this up and it works great, i am doing some other mods next week to it and will make a vid with all the details so stay tuned , i got it from craigslist for real cheap and i like it thanks for watching

[@LivefreeanddiyTv]

Looks nice, head on over to a carpet store and get some scraps (or samples), glue those on the tops of the stairs, the cats will love it :)

[@houtjeboom]

Cool idea Patrick... need one for my cats.

[@Patricksworkshop]

+houtjeboom thanks Houtje for watching

[@SterlingsWoodcrafts]

Neat Build, Nice work

[@Patricksworkshop]

+Sterling Davis thanks Sterling

[@audiotechlabs4650]

Great! You have stepped up to the plate, my man! The white finish pops. Who did the music? Cannot wait for the next. Thankz

[@Patricksworkshop]

+Audio Tech Labs thanks the music link is in the description its from the youtube music library thanks for watching

[@Irwin-Aviation]

Like button demolished. Nice project Patrick

[@Patricksworkshop]

+Black Widow Woodworks thanks for the like and for watching

[@ivanmills7664]

Apologies I found the video about it.

[@Projectoftheday]

Really good job Patrick.

[@Patricksworkshop]

+Project of the day thanks for watching

[@JPinFuerteventura]

Nice project Patrick. How is Ice doing by the way?

[@Patricksworkshop]

+JP in Fuerteventura thanks Ice is doing well still has anemia but she is ok

[@JPinFuerteventura]

Great - I am glad she is on the mend

[@FredrikRambris]

The cats are gonna have a blast. And I bet lions could use it too without breaking it. Nice job.

[@Patricksworkshop]

+Fredrik Rambris its built strong for her fat cats lol thanks for watching

[@jeffersonairplane6753]

Very great idea using a backboard for it, rather than using underside support beams. You may have had a slightly easier time painting if you did the painting before screwing it together, i know those corners can be tough to paint properly

[@Patricksworkshop]

thanks for watching the painting is like therapy so its no big deal thanks for watching did you see the other cat shelf videos kzbin.info/aero/PLa5WX178M7cc2TTiZi3RXku0eM7ru1Ivi thanks for watching and commenting the aprichated valve is wide open lol

[@Uncle_Buzz]

I have no use for cats. On second thought...I could think of some uses. :O Cheers! Chris

[@Patricksworkshop]

+Cactus Makeshop ha Ice has a cat of her very own thanks for watching

[@OurCatioHome]

Good job Patrick!

[@protect.your.digits.creations]

Hello Patrick . How is ICE . I hope she is felling better now .

[@Patricksworkshop]

+Gregg Voice of Reason she is doing well still has the anemia but shes ok thanks for asking and for watching

[@DaveGatton]

Nice project Patrick. It's great to see you back in your shop making videos my friend.

[@Patricksworkshop]

+Dave Gatton thanks Dave im back at it thanks for watching

[@Bow77tie]

Nice. I like the problem solving and thinking on your feet.

[@Patricksworkshop]

+Josh Caldwell thanks Josh and thanks for watching

[@ivanmills7664]

Question about your radial arm saw table. Where you blade goes back into a box/guard. Could you do a video about it or explain it please. Thanks awesome video.

[@and36351]

Nice job Patrick .. how's your dog ice doing ??

[@Patricksworkshop]

+Andrew Kelley thanks Andrew Ice is doing good

[@freezemanrjbr]

Wow! I'll make some of these to my 3 cats. But my ones I'll cover with sisal twines, to allow them use it to "sharpen" their claws in other place without destroying my couch. Thanks a lot, man.

[@PaulScott_]

Good Job Patrick, I made something similar by stepping up three boxes and use them for book shelves. Now the cats can get from my computer desk to a loft shelf i built into the corner near the ceiling.

[@tooljunkie555]

whats up patrick! nice build man!!-my sister wanted steps made for her lil beagle at the foot of her bed..thanks! man this gives me an idea .

[@Patricksworkshop]

+Joe basementwoodworking right on Joe thanks for watching

[@tooljunkie555]

Patrick's work shop always do when theres a Patrick's Workshop video:]

[@AdventuresInDIY]

Great build Patrick!

[@Patricksworkshop]

+AdventuresInDIY thanks Chris

[@mfwoodshop]

Cool cat shelf, nice job

[@Patricksworkshop]

+Mike Fulton thanks Mike

[@TyMoser]

I like the straight edge you used to get a straight cut on that plywood. Your clamping sled is a good idea too. Is that metal rod on the back for anything in particular or just to help move it around?

[@Patricksworkshop]

+Ty Moser (MonoLoco_Workshop) thanks for watching

[@lizeth987]

Lovely handsome

[@SchurmanScrollWorks]

Great build Patrick. Love the table saw jig.

[@Patricksworkshop]

+Schurman Scroll Works thanks Mark

[@WigWagWorkshop]

Love it! Think I will make some for the office

[@Patricksworkshop]

+WigWagWorkshop thant sounds like a good idea thanks for watching

[@robharrod]

Nice project Patrick !! *Demolished!!!*

[@Patricksworkshop]

+Rob Harrod thanks Rob

[@Cactusworkshopchannel]

Nice build! A few takes of the cats are always useful in the internet! I miss them :P cool job!

[@Patricksworkshop]

+Cactus! workshop next time catus i didnt have a cat on hand and Ice is to heavy lol thanks for watching

[@DavidBishopinc]

Gee thanks Patrick, now my cat wants one.

[@Patricksworkshop]

+David Bishop ha your cat said so let it be so then thanks for watching

[@robertweigandt9449]

Great job I like that you had a back up plain for a mistake.

[@Patricksworkshop]

+Robert Weigandt yeah me to , i liked the first size but cousin wanted it a bit shorter so i made it happen thanks for watching

[@DLee1923]

That was great ! Thanks ! 👍 (But it's a little too elaborate for myself to try to build) ☺

[@FrankFreitas1601]

Nice job Patrick. Hope to cya soon on the next hang out.

[@Patricksworkshop]

+Frank Freitas thanks Frank

[@WoodworkingManiak]

Cool stuff!

[@Patricksworkshop]

+WoodworkingManiak thanks Tim

[@MikeKapotsy]

Nice intro and project Patrick!

[@Patricksworkshop]

+Mike Kapotsy thanks Mike

[@Retroweld]

Cool man! 😎

[@Patricksworkshop]

+RetroWeld thanks Douglas

[@willfultoday]

you got skillz man....love the cat shelves

[@Patricksworkshop]

+willfultoday thank you for watching and for the kind words

[@jpwoodwork]

very cool

[@Patricksworkshop]

+jp woodwork thanks JP

[@DerClaudius]

good project, video too long. cut repetitions out or long processes short

[@Patricksworkshop]

+DerClaudius thanks for the advice ill keep it in mind thanks for watching

[@marvfear]

Can you come to Thailand and make one for me Patrick?

[@Patricksworkshop]

I'll book a flight today.

[@WildmanDesignCo]

That is a purrrrrrrrdy cat shelf.

[@Patricksworkshop]

+WildmanProject thanks brian

[@lennyf1957]

Neat project, you always get my thumbs up Patrick

[@ITSAWOODTHING]

Looks awesome Patrick.

[@Patricksworkshop]

+ITS A WOOD THING thanks Ronnie

[@RenoScruggs]

Love the cat self and the video. I have watched a bunch of your videos and I have been wondering about your table saw. What kind is it ?

[@Patricksworkshop]

+steven reno ithanks for checking out my vids, my table saw is a potercable- pcb220ts is the model number . it cheap and works good , but im looking to upgrade soon . thanks for watching

[@RenoScruggs]

My pleasure

[@moyperezwoodshop1722]

dude that was a great video and project buddy!. great job

[@Patricksworkshop]

+Moy perez woodshop thanks Moy my cousin loved it and thats all that matters thanks for watching

[@paulam18v]

great video, thanks.

[@Patricksworkshop]

+Paul M thank you sir

[@willemkossen]

With toys like that, i wish i were a cat

[@Patricksworkshop]

+Willem Kossen thanks William

[@MikeMerzke]

Great job Patrick!

[@Patricksworkshop]

+Mike Merzke thanks Mike

[@ssgvern]

Whoa, Patrick! What do you take in your coffee...Redbull?! Nice build. I have two cats that would love this.

[@Patricksworkshop]

+Vernon McNabb hi Vernon thanks for watching i take my Coffee with milk no redbull lol thanks for watching and i hope ur kitties like these wall shelf's as much as my cousins kitties do

[@ssgvern]

About half-way through your video, you were talking in fast forward mode...'bout spit my coffee out laughing.

[@Patricksworkshop]

haha thays funny

[@anthonystrazhnikov2741]

Great video and a really nice looking shelf. I think I'll make one for my mom. Also, thank you so much for being so helpful to me on the Facebook forum I thought I was subscribed to you with my KZbin channels account as well, but in not so I'll go over and subscribe.

[@Patricksworkshop]

+Anthony Strazhnikov thanks Anthony

[@gnosticsoul1]

I like both video & project.

[@Patricksworkshop]

+gnosticsoul1 thanks so much and thank you for watching

[@nowaas66]

What a nice project !! Would love to see back n forth pictures of the project when you done building it. Keep up the cool work Patrick.

[@Patricksworkshop]

did you see these videos here is the playlist of the 3 different cat shelves i made for my cousin kzbin.info/aero/PLa5WX178M7cc2TTiZi3RXku0eM7ru1Ivi

[@CharlesDearingScroller]

Excellent simple but useful idea. Great work Pat!

[@Patricksworkshop]

+Charles Dearing thanks Charles

[@crossgrainwoodproductsltd9230]

Cool Build! You gave me an idea for my cats only a bit longer. I like the fact you mounted the stair unto a backer board. Thanks for the idea and good instructions! ~Dolly

[@Patricksworkshop]

+CrossGrain Wood Products,LTD thanks for checking it out Dolly i have several more coming up in the next month so keep a look out for those thanks for watching

[@lishatheghosthunter]

You may have mentioned this in the video, forgive me if I missed it... I want to build this and I'm shopping for a nail gun. What gauge nails did you use here? Thanks!

[@Patricksworkshop]

hi i used 18 gauge nails with a 18 gauge brad nailer but all the strength comes from the glue and the 2 inch screws I used I hope this answers your question thanks for watching my videos and if you have any more questions please feel free to ask

[@KSFWG]

That's just CATastic, Patrick! Glad to see a video from you! Thumbs up fer sure!

[@Patricksworkshop]

+KSFWG thanks Dave

[@sdmcustoms]

looks great ,that angle cuttin sled is great ,good video

[@Patricksworkshop]

+sdmcustom woodworking thanks for watching the sled is my taper jig i made a while back

[@angelh1608]

Those are gorgeous! You’re very talented!

[@dnngskn62]

Cool build Patrick. Nice to see you smiling again. Great vid by the way.

[@Patricksworkshop]

+Donnie G thanks Donnie thanks for watching

[@williamkenyon7081]

Awesome bit of gear, well made and great attention to small details filling and sanding top

[@gnewerme]

nice) so, where is cat ?

[@Patricksworkshop]

+gnewerme cat at cousins not here ill have a cat in the next one thanks for watchin

[@TheShavingWoodWorkshop]

Great build Patrick !

[@Patricksworkshop]

+The ShavingWood Workshop thanks Tommy

[@TheShavingWoodWorkshop]

You're welcome :-)

[@BraxtonWirthlin]

Awesome video, Patrick! I'm sure your cousin will love it!

[@Patricksworkshop]

+Braxton Wirthlin thanks Braxton she loved it

[@Mitermikeswoodshop]

Nice project Patrick, glad your back. I be she will love it, both the cat and your cousin....lol.

[@Patricksworkshop]

+Miter Mike's Woodshop thanks Mike she loved it

[@octoberresseguie6702]

you make it look so easy! thank you . looking forward to your next project!

[@summerswoodworking]

Hey pretty cool bro! I loved the music it reminded me of Metallica. Shelf turned out great!

[@Patricksworkshop]

+Summers Woodworking thanks for watching Brian

[@Pyronics]

Well done!

[@Patricksworkshop]

+Dan Robidoux thanksDan thanks for watching

[@Yourvideossuck247]

Great video Patrick!! That jig you used to cut the angles was awesome, please do a video about it.

[@Patricksworkshop]

+Yourvideossuck247 i have a video on the jig here is a link kzbin.info/www/bejne/Z2W1i2uAfdxod6c thanks for watching

[@DIYTyler]

Nice!

[@Patricksworkshop]

+Tyler G thanks

[@Jer_Schmidt]

Great work!

[@Patricksworkshop]

+Jeremy Schmidt thanks Jeremy

[@MachineRight]

Great video Patrick I'm sure that cats will love it!

[@Patricksworkshop]

+Machine Right thanks Anthony

[@JemmySheng]

The project looks great, the video is awesome! Nice work, Patrick!

[@Patricksworkshop]

+Jemmy Sheng thanks Jermmy

[@bocfus72]

Great project Patrick, good to see you back in the game!

[@Patricksworkshop]

+dana smith thanks Dana good to be back

[@TheMarcball]

cool, man. Keep on trucking ! (from France)

[@Patricksworkshop]

+MakeFix merci pour regarder bonjor

[@NicholasGomez]

Great project Patrick!! Love the paint roller on the stick trick.

[@Patricksworkshop]

+Nicholas Gomez thanks Nicholas for watcfhing

[@GuysShop]

Came out great Patrick!

[@Patricksworkshop]

+GuysWoodshop thanks for watching Guy

[@gillianbc]

Really nicely done.

[@lonelywolf6515]

You're amazing. I really want to build one..

[@Patricksworkshop]

+Kalvyene 007 thanks so much for the compliment they're pretty simple to build so have at it and you can make it any measurements you want thank you so much for watching