How to Make a Knife Pleated Skirt

[@oksanabula8709]

Thank you for the video!

[@merisacarlosbantugan]

Thank you for watching!

[@carmelitaprospero4714]

Mam maraming salamat po sa dagdag kaalaman na binahagi Po ninyo malinaw Po kyong mag demo mabuhay Po kayo

[@merisacarlosbantugan]

Salamat po at nagustuhan nyo.

[@BageManana-ez1qg]

Thank you cc

[@anastaciabajenting3508]

Thanks for sharing

[@merisacarlosbantugan]

Thank you for watching!

[@sheluvsticth0218]

Thanks for ahareng po dito ako medyo nalilito kasi kahit may ng tturo dito na sakin dito hehe ung isa di ko gusto diskarte ung isa gusto diskarte nya kaso di ko naget gaanu haha pero eto ung sbi kong gusto ko diskarte magkatugama iba lng ing pag kakaintindi ko mas nalinawan po ako nung mkita ko to salamatch mas mganda kasi malinis po ang gawa talgaat dhil po sa tcher kayo mas mlinaw skin panu ko idivid haha naaining ako mabagal kasi ako makaintindi po hehe

[@merisacarlosbantugan]

Salamat po at natuto kayo

[@peterisemin6281]

Pls ma'am, how do calculate the number of pleats in a skirt waist of 37inches with 46inches hips. Pls how do I go about it.

[@merisacarlosbantugan]

Hi! Make sure that the width of your fabric is 60". Divide 37" by 2, it is equal to 18 .5". The number of pleats are 9 counts and the width of the folds are 4". Start from your right (facing the fabric) put 1" allowance for the zipper, then start marking 4" for the first fold then 2.1" for the first pleat, then repeat 5 times, so the total pleats for the first 5 is 10.5", then use 2" width of pleats for the remaining 4 pleats to make 8". If would add 10.5" to 8", now you'ld get 18.5" for the front. Do the same on the back part. All the measurements your folds are 4" and the seam allowances for the sides are 1" for the zipper & pocket. No need to use hip measurement. I hope it helps. Thank you!

[@rhonaguianan5396]

Hi mam, parequest naman Po pattern Ng shorts para sa boys.. school uniform Po ..thank u so much Po..

[@merisacarlosbantugan]

Hi! Sige po bibili po ako ng materials para po sa shorts na uniform. Salamat po sa panonood!

[@huguettetchiapi1126]

where did the measurement of 5 inches come from? did you calculate that? if so how

[@merisacarlosbantugan]

Hi! 5" is the desired width of the fold, you can use 3 1/2" to 5" width depending on the width of the fabric. The wider the width of the fold, the deeper the pleats. I hope it helps. Thank you!

[@KeiQuilatan]

Mam, is it the same marking if pa-opposite side ang pleats? (Example left or right-side pleats)

[@merisacarlosbantugan]

Hi! Basta nagpleats ka, nakaharap ka sa right side of fabric, kung papunta sa right ginawa mong folds or pleats, uulitin mo lang ang procedure sa left para paikot ang way ng pleats. Salamat!

[@KeiQuilatan]

@@merisacarlosbantuganthank you po.

[@ElizabethMepana]

maam , may video ka ba na dahandahan at naka explain. di ako mahilig mag subcribe kasi minsan lang oras ko makatoon sa mga video. kon may price and video ok lang po

[@alicevincent5508]

Nice

[@merisacarlosbantugan]

Thank you for watching!

[@cristabelramos681]

Thank u po❤️ Anu pong tawag sa tela na yan at pwd po ba yan sa slack uniform mam?

[@merisacarlosbantugan]

Hi! Armani fabric po ang ginamit ko dyan, pwede rin po ang Hamilton, Klopman at Katrina. Lahat po iyan pang skirt at pants. Salamat po sa panonood!

[@cristabelramos681]

@@merisacarlosbantugan thank u po❤️

[@cheskalorraine9951]

Ma'am gudam Po paano Po kung ung waistline is 27" paano Po ung tamang sukat Ng pleats? I rerepair kulang Po kc ung uniform ?

[@merisacarlosbantugan]

Hi! Yung magiging sukat ng pleats, 5x na 1.9" and 2x na 2". Kasi waist is 27" ÷ 2 = 13.5", kaya 1.9" × 5 = 9.5" then 2" × 2 = 4", iadd mo yang 9.5" + 4" = 13.5" ang lalabas sa front lang yan, uulitin mo lang sa back kaya pagpinagsama mo ang 13.5" × 2 = 27". Sana nakatulong

[@jasmaychannel7608]

Paano pho if 28 waistlines tapos 5 pleats paano e divide

[@MASTERSEWER]

master sewer here panoodin nyu nmn po ung video ko Bk magustihan nyu Kung Pao ko ipleats ung skirt tipe nyu lng po master sewer thanks

[@merisacarlosbantugan]

Sige po I'll visit your channel

[@arcelimelecio4278]

Hello maam saan nyo po kinuha ang widthbof fold 😊

[@merisacarlosbantugan]

Hi! Based po sa laki ng tela at size ng waistline, the smaller the waistline and the bigger the width of the fabric, the deeper the fold. Salamat!

[@cynthiagenido6978]

Mgknu labor s pggwa ng uniform skirt

[@merisacarlosbantugan]

Hi! Kung 250 to 300 po pag ganyang skirt

[@jessicaabarca9781]

hi, mam is the 5 inches for the fold standard?

[@merisacarlosbantugan]

Hi! No Mam you can use 3", 3 1/2", 4", 4 1/2" and 5" depending on the esist measurement. The bigger the waist size, the narrow the pleats so that it will fit to the size of a 60" width of fabric. Yhank you!

[@crisann8302]

If 22 waistline pano computin ma'am?

[@merisacarlosbantugan]

Hi! Ang fold po lahat pwedeng 4" or 4 1/2" ang width for 7 pcs. Waist ÷ 2 (22 ÷ 2 = 11"). Then yung pleats 5x na 1 1/2" at 2x na 1 3/4" ( 5 x 1 1/2 = 7 1/2" and 2 x 1 3/4" = 3 1/2") kaya ang total 7 1/2" + 3 1/2 = 11" for front and 11" for the back. Salamat!

[@flormartinez3262]

❤❤❤

[@merisacarlosbantugan]

Thank you!

[@chessychawarma4156]

Kapag po 21 ilang plits po

[@merisacarlosbantugan]

Hi! Ang gawin nyo po idivide nyo muna po ang waist sa 2 (21"÷2=10.5"), ang magiging lapad po ng pleats ay 1 3/4" sa 6 na piraso lang po kasi pambata na po ang ganyang waist measurement, kaya 1 3/4"×6=10 1/2". Ang lapad po ng fold ay 4" para malalim, pwede rin pong 3 1/2". Salamat po!

[@chessychawarma4156]

@@merisacarlosbantugan thank you po

[@jonalynrivera2268]

Mam Ilan po Ang lapad Ng waistband?

[@merisacarlosbantugan]

Hi! 3" po kung ang interfacing (patigas sa loob ng waistband) po ay 1", then yung sewing allowance po 1/2" magkabilang sides. Salamat po!

[@jonalynrivera2268]

@@merisacarlosbantugan ah 3 " po Ang cut kasma na oo don seam allowance sa 3"

[@merisacarlosbantugan]

@@jonalynrivera2268 Oo kung ang lapad ng patigas mo sa loob ng waistband ay 1", may 1/2" allowance on both sides