Make your LED strip to work on USB cable and maybe use it anywhere you want: power bank, tent, home, behind TV, in kitchen etc.
Пікірлер: 148
@SagarAsaga2 жыл бұрын
this is the video is looking for... Thank you
@esp4yu2 жыл бұрын
Thank you for sharing. It seems that the LED are connected in Parallel, hence LED Strip can be cut for shorter length. Voltage need not Change but how about Current? Will Current need to be increased to meet longer LED Strip? I have a 5V 1A adapter for the USB
@theurbanartist775 Жыл бұрын
Thanks for the information 👍🏽
@theresabajorek2 жыл бұрын
exactly the video I was looking for! Thnk you so much :)
@andreeew_kinggg17722 жыл бұрын
stoners already having the wire wya
@wickedskillz1499 Жыл бұрын
Yessssirrr😭
@michaelschurm41632 жыл бұрын
Cutting the isolation of the cable with the multi tool a true horror for an electrician
@palavoyz2 жыл бұрын
Hi does it have a limit for the led strip? how long is the maximum? thanks
@mohisup Жыл бұрын
Depends on the wattage of the adaptor (e.g. if it's 20w it should do 5ft)
@jaystone50363 жыл бұрын
Let me try this then I'll feedback..nice work bro
@Gr0wnUp.2 жыл бұрын
how'd it go?
@cihloun2 жыл бұрын
and he never gave the feedback poor guy
@Design_Jworks2 жыл бұрын
Hahaha
@amiaw12 Жыл бұрын
Died of electrocution😢
@andreassylvan3478 Жыл бұрын
Nice but you could also solder a USB connector onto the strip ;)
@pj.zzzzzzz21472 жыл бұрын
Can a wire have more than more colour wires ? Or it has to be a wire with only red and black inside ?
@sanavk4095 Жыл бұрын
yes it is for data transfer it will not affect anything in this case . only connect red and black
@APaul-se6pe2 жыл бұрын
use ohms laws to determine. Your working with 5 volt DC so you just use those formulas. Paying attention to current( i ) . Some chargers (laptop blocks) go as high as i=3.64 (likely a apple laptop re block) while most are i=0.8 or i= 1.0 A being standard.. Some of the questions being asked here, (MOST) tell me you should not be playing with pwr supplys. The blocks that come with usb led kits like monster are not the same as cell blocks. they have much more wattage, which one could say, is a measure of current and voltaGE potential. 5v at 0.8a is not the same as 5v at 2A. The latter can be up to almost 3 times more in capability.
@atrocitus91982 жыл бұрын
what if the charger brick's volt and strip's volt doesn't match?
@karanrajpure78483 жыл бұрын
Sir 5v led strip ki link milegi for purchase
@abhijith29874 ай бұрын
I've an LED strip of 12v ... can an adaptor of 18v can be used?
@AdityaGuptaX3 жыл бұрын
Mine is not working although I have adapter attached to my lights to control the voltage.. should I remove and try?
@BojanSekulovski3 жыл бұрын
Yes you should. Currently as I understand it seems like you have two adapters one the usb one, and one controlling adapter for the voltage. They interfer with each other.
@saadchaudhary6293Ай бұрын
is that same phenomenon can be used with 12v light??
@farhansheikh32766 ай бұрын
Adapter direct plugged on switch board?
@georgesanchez746510 ай бұрын
I have tried that over and over again and doesn’t work for me.
@BullSit48211 ай бұрын
Incredibil thxx u șso muchhhh
@alexrynk8831 Жыл бұрын
my led lights that i cut have 4 copper connector things labeled 24v+, B, R, and G. How would I do this?
@mattsnow3357 Жыл бұрын
If you just hooked power up to one or more of those primary colors Blue, Red, Green then it would only shine that color at full brightness. You could also power multiple colors with a short length of jumper wire to make secondary colors, or all 3 for white light. To have full control of your multi-colored lights, you would need a controller, or a computer that sends variable signal strength to tell the 3 colors how bright to shine at the same time to produce the full rainbow.
@ananthupavi16844 жыл бұрын
Sir my charger wire have red and a green wires which is +&-
@Spark-pv9js3 жыл бұрын
Well idk man if you have multimeter plug usb in the adapter and in the wall then set multimeter to volts and put red fork on red wire and black fork on green wire. If it shows +5 volts then red is + green - and if it shows -5 volts its the other way arround. But it "should" be red + green -
@rifkiardiansyah6164 жыл бұрын
how if i use green, white, orange, blue usb.
@flickeringthought63493 жыл бұрын
Can you solder a USB wire to a single PICO LED and attached it to a phone charger or will it burnout?
@BojanSekulovski3 жыл бұрын
Haha. Try. The light may broke.
@mbsicko97344 жыл бұрын
So just solder the wire to the strip and plug the usb in for it to turn on?
@QuantumQuest1133 жыл бұрын
Waiting for reply
@mightyprofitgt81413 жыл бұрын
Yes
@haseebsindhu18194 жыл бұрын
5v pa work kara gi?
@kimerimurry9 ай бұрын
What did he use to glue the wire??
@rafabacchin10 ай бұрын
Da certo na de 4 pinos rgb?
@amazonwoman19703 жыл бұрын
Can you connect lights to USB on the back of a flat screen TV on wall
@gonzocrazywastaken3 жыл бұрын
You should be able to
@BojanSekulovski3 жыл бұрын
Yes
@SS-pi2yi2 жыл бұрын
In the video it shows light strips that require 5V DC to work. Are there any light strips that work with 12V DC? Anyone know? Please confirm THANK YOU.
@BojanSekulovski2 жыл бұрын
Yes there are. Search Aliexpress and Ebay
@flyurway2 жыл бұрын
Add a resistor.
@pawhnailitho35433 жыл бұрын
I bought 1 meter legth led strip and tested with 2 wires +&- on my battery but when connected to usb Nothing works at all,i destroy 4 Usb canle 😭
@jithujithu77763 жыл бұрын
Same with me. Any solution ?
@mozzman9030 Жыл бұрын
I know this is old but you need to use a 5 volt led strip. It won't work with a 12volt strip.
@abdirisaqm53763 жыл бұрын
What if I have a white and red wire does that still work???????
@BojanSekulovski3 жыл бұрын
Most probably the white one is - and the red is +. Should work.
@jayant_34 Жыл бұрын
How volt was the charger you used?
@BojanSekulovski Жыл бұрын
5V
@yourmom-ul2gf2 жыл бұрын
Thx bro I bougth battery led lights and they didn't last long
@ir86103 жыл бұрын
I want to connect led lights to my monitor but I don’t have USB ports anywhere on my monitor. What do I do
@zabir2443 жыл бұрын
Dhon chuso dhon
@yagyadattsahu3623 Жыл бұрын
Chalu bhi karke dikhe dete ji to achha lagta
@jetamiemaster3 жыл бұрын
Hi. I have 1 meter of that warm led light. I want to cut and reduce its length like 3-5 lights. So it should be like 3inches. Will it work? Same 5v connector?
@BojanSekulovski3 жыл бұрын
It should work yes, but I don't really know how to make the calculations. For small length it will work.
@jetamiemaster3 жыл бұрын
@@BojanSekulovski thank you so much.
@AVALEA-kc2in3 жыл бұрын
Does it work?
@jamesdelaware95653 жыл бұрын
Some my led lights connected to the phone charger Box it's still not turning on and to plugged up to the back of my TV and it's still not turing on what do I do About this problem
@jamesdelaware95653 жыл бұрын
*so*
@dabigdadyz3 жыл бұрын
@@jamesdelaware9565 you probably have 12v leds. usb delivers only 5v
@AimOnFlame2 жыл бұрын
How do you change the colour afterwords
@georgecirlig35532 жыл бұрын
If you want rgb led, you need more than that. This video teaches about a single color led strip, which has only + - pins. Rgb has 4 pins
@LucaWolfeMurray2 жыл бұрын
what about 5pin LEDs?
@JesseTheG_ Жыл бұрын
5 pin LEDs use the extra pins to control the color/patterns. If you only use the ground and power pins it should just be stuck on white constantly. Or it might not work at all depending on the design/brand
@crustythewanksock2413 Жыл бұрын
Hi, does this void my warranty if it causes my house to burn down?
@tobiasfjeldtvedt28424 жыл бұрын
Can I tape em?
@BojanSekulovski4 жыл бұрын
No, you have to use tin.
@shresthkhare7423 жыл бұрын
Sir my led light in more than 2 meter and its not at all working by this way what's the problem
@BojanSekulovski3 жыл бұрын
Check if your lights line works with only 12V and phone charger is weak for more than 2m
@kingbreezy3004 жыл бұрын
What if u don’t have that kind of glue at your house what can u use?
@BojanSekulovski4 жыл бұрын
You have to use that one... Strong bond needed..
@MTB-ENG4 жыл бұрын
*Solder
@strangestanger63053 жыл бұрын
If u don't have glue. You can spit on it.
@Arjadia3 жыл бұрын
Its not glue its solder, it fuses the wire so power runs to the metal
@ardinsky77543 жыл бұрын
@@strangestanger6305 just use a rice
@nobvirusplayz55203 жыл бұрын
Will this work if my usb plug is au
@BojanSekulovski2 жыл бұрын
Yes
@notgesund Жыл бұрын
not the best soldering but thanks for tutorial :D
@luckykaushik24734 жыл бұрын
Can i connect strip led light to any old mobile a charger is it safe?
@BojanSekulovski4 жыл бұрын
Yes, try, if it is not working, than you need a charger of 9 or 12 volts. The simple LED strips like the one on the video work on 5v without problems.
@luckykaushik24734 жыл бұрын
@@BojanSekulovski thanx for ur suggestion , but one more issue when i cut my charger's wire i see that there are both black colour wire now how do i identify which one is positive and negative ??
@HarshHit3 жыл бұрын
@@luckykaushik2473 Try Once with both if it works good if not then change poles
@luckykaushik24733 жыл бұрын
@@HarshHit is it safe while i trying both poles for checking ? What if my strips get short circuit .
@provatAT8 ай бұрын
Bro it us not working in use data cable but when i connect with a 9volt battery it working. So bro can you told me that why this is happened?
@BojanSekulovski7 ай бұрын
The led strip is not working with 5V, you need 9V or 12V adapter.
@Floyd_ish3 жыл бұрын
What about RGB strip?
@BojanSekulovski3 жыл бұрын
Then you should use a switch
@diybygenomandin3 жыл бұрын
switch like? can you do another video for rbg?
@BullSit48211 ай бұрын
❤❤❤❤❤❤❤❤❤
@tha1unknownmusic2 жыл бұрын
My strip says 24 v on it ?
@azazahsan69943 жыл бұрын
Will this work on 12v led lights?
@zangijetia28073 жыл бұрын
I tried and exploded lol
@enimzx3 жыл бұрын
@@zangijetia2807 damn ggs mate.. 😂
@zangijetia28073 жыл бұрын
@@enimzx 😅
@shiroumxm20522 жыл бұрын
they wont work, they need more power
@murtazakapasi24413 жыл бұрын
I used the default power adaptor (power supply) given by company but it got short as I switched on. Is there a fault in led strip? And can i use USB for 5mtrs of LED strip?
@BojanSekulovski2 жыл бұрын
I don't really think you can work USB or USB charger to supply 5m of LED
@jayant_34 Жыл бұрын
I think the charger he used may have of more volt, right??
@CSIVn4 жыл бұрын
Any limit on the length of LED strip?
@balazsszegedi55243 жыл бұрын
Hi! Yes. It depends on the current consumption of your led strip. An average usb can handle around 500-1000 mA (for example a tv usb if it is not a special power port maybe only 500mA). But if you use a powerbrick it can handle from 1A to 3A or more. But you need to look at the datasheet on the brick.
@ggolympiacos72302 жыл бұрын
@@balazsszegedi5524 I will take a led strip bluetooth with usb.It's 5 meters. Can I put it on my phone charger?
@prasadnikam50964 жыл бұрын
Not working. 12 v led strip and samsung charger output 5.0=1.0A . Plz help
@prasadnikam50964 жыл бұрын
5.0v=1.0A
@abbysimons25983 жыл бұрын
step up converter is probably the missing piece
@danieltrezub81303 жыл бұрын
If your LED strip is 12v, you need a 12v charger. It won't work with a 5v charger.
@singhbrahamdeep4 жыл бұрын
But how do i control the colour of the strips?
@BojanSekulovski4 жыл бұрын
You have RGB strip with more colors?
@singhbrahamdeep4 жыл бұрын
@@BojanSekulovski yes, a multi colour one with 4 wires.
@BojanSekulovski4 жыл бұрын
@@singhbrahamdeep the negative goes to "-" and the positive to one of the R or G or B as you want.
@singhbrahamdeep4 жыл бұрын
Thank you so much. I will give it a try and let you know.
@dousenetworkllc3 жыл бұрын
@@singhbrahamdeep soooo?
@omidnosrati9167 Жыл бұрын
Not working on 12 v led
@BojanSekulovski Жыл бұрын
Yes, it only works on 5v led lights strip
@fuzz2978 Жыл бұрын
You might get more subs not playing that noise in your video.just advise.take it or leave it.
@BojanSekulovski7 ай бұрын
Different times.. I should have talked than, but it is what it is :)
@amanshinde8156 Жыл бұрын
This method is not proof as some led strips' driving voltage can be 8V or greater. So in short the minimum voltage to be given is 8V, otherwise, the circuit may not operate. This method is applicable when the driving voltage is 5V or less.
@BojanSekulovski Жыл бұрын
Just for fun. But you are right and correct!
@lilbigthreetv3 жыл бұрын
If its blue and red what to do?
@BojanSekulovski3 жыл бұрын
Most probably blue is - and red +. Try them on the linghts for a second like that.
@howardmathews55724 жыл бұрын
Can I just tape it? Cause I don't have these YAAY OH MA GAAAAWD SO SCARY tools.
@DJPacoRamirez4 жыл бұрын
No. Harbor freight sells them for a couple $$ its worth having
@Spark-pv9js3 жыл бұрын
You mean soldering kit? XD
@djfourbar79533 жыл бұрын
yeah bra tape does the same thing
@BojanSekulovski3 жыл бұрын
Try, but it will fail instantly :)
@cherryinnit76603 жыл бұрын
I dont understand
@Sistershow73 жыл бұрын
O o ionii
@redslover52933 жыл бұрын
Question: Just how useful is an instructional video WITHOUT verbal instructions?
@BojanSekulovski3 жыл бұрын
I tought that written instructions will work beter on this video.
@xmikywayx3 жыл бұрын
Not everyone has hearing; you can't please everyone. OP took time out of their day to make a video that is freely available to watch! Many people have found this video helpful. There is no reason to be so negative about something freely offered
@simonopen28162 жыл бұрын
funny... my usb cable only has white, red, green and silver/clean
@JesseTheG_ Жыл бұрын
Silver/clean would be your ground (black in this video)
@Toche Жыл бұрын
hum not working for me ... weird
@BojanSekulovski Жыл бұрын
Maybe the led strip is more than 5V
@sameer8383 жыл бұрын
It's fake usb port don't have sufficient power to light such led stripes
@tazmaniachill2 жыл бұрын
Jesus a lesson in how not to solder… rubbish
@BojanSekulovski2 жыл бұрын
This is not a video on how to solder.. Thanks!
@tazmaniachill2 жыл бұрын
@@BojanSekulovski no its not but your doing a professional install so why do you not want the finished result to include a good standard of soldering also? Thanks
@BojanSekulovski2 жыл бұрын
@@tazmaniachill Because I am recording to show my viewers what can they do. I am watching at the camera and many other things in meantime :)
@tazmaniachill2 жыл бұрын
What a poor response, i just hope your viewers don't follow your example and emulate your soldering skills, you would get more respect from the community if you at least looked at a decent soldering technique, your building a definite failure factor. Be lucky 👍🏻
@BojanSekulovski2 жыл бұрын
@@tazmaniachill I can say that you are correct that maybe I should have soldered it with a better technique and make it look better, but after all I feel that you want to hate.. Sorry for sharing my experience on youtube!
@luxephil1232 жыл бұрын
120k views and 955 likes. I don't know if I can follow this tutorial, thanks youtube for this dumb decision.