How to make a License Plate Sign, Step by Step

  Рет қаралды 19,946

Southern Balance

Southern Balance

Күн бұрын

Пікірлер: 42
@pattyisspoiled7852
@pattyisspoiled7852 3 ай бұрын
Beautiful work!
@_BAD_MERC_
@_BAD_MERC_ 3 жыл бұрын
Those are beautiful. I wanted to make one for me and my wife and just didn't know where to start. Now I know how from start to finish!! Thank you for your unselfish effort to share your craft!!!
@daveconry830
@daveconry830 Жыл бұрын
Cool signs! Thanks for sharing.
@DavidTaylor-ki2ir
@DavidTaylor-ki2ir 7 ай бұрын
I've seen a lot of these and by far yours are created with the highest quality craftsmanship. Hats off to you.
@jamesvondrasek7347
@jamesvondrasek7347 6 ай бұрын
Very Good Man, to take time to show some of your ideas, I Hope your still doing well. Take Care of yourself,
@peterhoytpeterj5155
@peterhoytpeterj5155 2 жыл бұрын
How do you cut the plate pieces so evenly?
@tinahale1471
@tinahale1471 3 жыл бұрын
Im going to check around like at car curshing places ,dmv car lots I don't know but seems like you could ask your local dmv for the plates I need to take care of my daughter and help her make it she not able to work she can paint really well I'm hoping I can get us going soon I'm a new subscriber I've been seeing this alot lately and want to try it I have all the stuff to do it love your work congratulations thank you 🙏
@southernbalance4221
@southernbalance4221 3 жыл бұрын
Hey Tina, whether the license plate signs, or something in one of my future videos.. I'm sure you will be able to find something you and your daughter can make. Thanks for watching!
@chrisreynolds2410
@chrisreynolds2410 2 жыл бұрын
Are you open to suggestions?
@wesleybrabant3595
@wesleybrabant3595 3 жыл бұрын
That's beautiful. Where did you get all the plate pieces from. Nice work
@DavidTaylor-ki2ir
@DavidTaylor-ki2ir 7 ай бұрын
Junk yards often take cars in with the plates still on. Develop a good relationship with a shop and you can buy all they bring in.
@dasfreakster
@dasfreakster Жыл бұрын
Sweet! Where did you finde the weed spacers?
@307Bison
@307Bison Жыл бұрын
Beautifull Project. do you sale letters?
@S30Uploads
@S30Uploads 2 жыл бұрын
I wish we were neighbors
@bubrebel9252
@bubrebel9252 2 жыл бұрын
What size brad nails do you use and what psi on the compressor?
@jennifergarfield9613
@jennifergarfield9613 Жыл бұрын
1:33 What kind of cutter do you use.? Thank you.
@dhduncan
@dhduncan Жыл бұрын
What width are you cutting the letters and numbers?
@christined.3728
@christined.3728 3 жыл бұрын
So you also poly the front sides? And do you only use the big tin snips for cutting the plates or do you use other tools, too? I think they look great!
@southernbalance4221
@southernbalance4221 3 жыл бұрын
Hello Christine, I do not poly the front, only the back. But I also Kilz and paint under the plates to seal it incase a customer uses it outside. I usually use long hand snips that cut straight.
@chrisreynolds2410
@chrisreynolds2410 2 жыл бұрын
You must have a killer handshake
@kdsrbaldwin4621
@kdsrbaldwin4621 Жыл бұрын
Did you cut all of those plates by hand or did you use a band saw?
@nicholastarantino5567
@nicholastarantino5567 Жыл бұрын
where do you get all the license plates
@therustyduck5400
@therustyduck5400 3 жыл бұрын
Awesome video, what kind of tool do you use to cut the plates, there is now way you use tin snips. Band saw?
@southernbalance4221
@southernbalance4221 3 жыл бұрын
Tin snips work fine, but I draw a straight line down it with a pencil and a speed square.
@hsprague77
@hsprague77 Жыл бұрын
Why not stain first before placing the letters?
@PawPawKellum
@PawPawKellum 3 жыл бұрын
Where does one, legally, obtain bulk license plates?
@billygoatracer
@billygoatracer Жыл бұрын
Ebay or the flea market
@mkw36
@mkw36 3 жыл бұрын
Are you using a brad nailer or a pin nailer? Thanks
@southernbalance4221
@southernbalance4221 3 жыл бұрын
Hello mkw36, I'm using a brad nailer. But you can use either, as long as what you're shooting in is short enough and doesn't come out of the back side of the wood you're using. I'll be doing a similar build very soon, its just hard to find the time to film being I work everyday. But stay tuned, you'll see some good future content.
@wesleybrabant3595
@wesleybrabant3595 3 жыл бұрын
What size pin nails you use without blowing through
@dennisg11348
@dennisg11348 3 жыл бұрын
Nice! What color is the stain
@southernbalance4221
@southernbalance4221 3 жыл бұрын
I use all different colors, I don't remember what color I used in the video. Any and all colors look great. You can't go wrong, just experiment.
@geraldbrasington3004
@geraldbrasington3004 3 жыл бұрын
Where do you get so many license plates.
@southernbalance4221
@southernbalance4221 3 жыл бұрын
I'm at the point that people bring them to me knowing I will buy them.
@chrisreynolds2410
@chrisreynolds2410 2 жыл бұрын
If you get back to me tonight and we come to an agreement I’m willing to go out and get as many as say 75-100 tonight and prepared to go as low as $5-$7 per plate. I’m talking about nice plates mew issues no old rusty stuff. I will acquire vanity plates for $10 for you. Hurry we still got time before the sun comes up. Do you have cashapporvenmo?
@chrisreynolds2410
@chrisreynolds2410 2 жыл бұрын
Ok. I problem. I just got bailed out of the police station….but I have some plates still stashed. Want them…at this point I take $4 each if you take them all.
@S30Uploads
@S30Uploads 2 жыл бұрын
Hahahahha its 420 somewhere
@yahkissa5794
@yahkissa5794 7 ай бұрын
Can I buy some letters off you ? I need a o,x,m,a
@shantaymadison5581
@shantaymadison5581 2 жыл бұрын
I am sure it could be improved. Check out the plans on the WoodPrix website.
Barn Found Rusty License Plates Restored and Preserved
8:39
Rocco’s Restorations
Рет қаралды 7 М.
Pendant Light, License Plate Pendant Light, Hand made Light
11:27
Southern Balance
Рет қаралды 5 М.
Всё пошло не по плану 😮
00:36
Miracle
Рет қаралды 5 МЛН
Perfect Pitch Challenge? Easy! 🎤😎| Free Fire Official
00:13
Garena Free Fire Global
Рет қаралды 11 МЛН
What's in the clown's bag? #clown #angel #bunnypolice
00:19
超人夫妇
Рет қаралды 42 МЛН
my business was DESTROYED overnight...
23:18
Spencley Design Co.
Рет қаралды 1,4 МЛН
Making a star with license plates
7:31
Steve “The License Plate Man” Russell
Рет қаралды 3 М.
Plasterboard HACK | Every DIY'er Should Know
11:29
On The Trowel
Рет қаралды 718 М.
How to Make a License Plate Birdhouse - Outdoors with Trav
13:41
Outdoors with Trav
Рет қаралды 3,5 М.
Don't Throw Away Your Old License Plate , Instead Do this
5:20
The Art of Craft
Рет қаралды 3,4 М.
Sublimation License Plate - How to, Tips & Tricks
4:18
Black Swamp Graphics
Рет қаралды 12 М.
License Plate Wrap DIY
11:43
Nicolas N
Рет қаралды 1,3 М.
Melting Copper Wire Into a River Table
16:53
Burls Art
Рет қаралды 2 МЛН
Всё пошло не по плану 😮
00:36
Miracle
Рет қаралды 5 МЛН