How to Make a Mars Rover / Rocker bogie Robot - Stair climbing

[@NavinKhambhala]

Let's check out website for all major details: navinkhambhala.com/crazynk

[@josuebenjamintejeda2162]

Navin Khambhala # crazyNK why do not you leave the materials you use !! just like I'll guess if I do not know what you're using!

[@hasimasari2775]

Aku beli keteyatifitasmu jual berapa aku beli

[@manojkumarroy7408]

Which place do you live

[@GoutamKumar-rt7gb]

Navin Khambhala # crazyNK 👍👍👍👍$sahil

[@resatkzlok2072]

Oolllo

[@brianbrewster6532]

AMAZED again! Finally got to see you switch over to a remote control unit to eliminate that ridiculous tether I saw in previous videos. This, my friend, is EVOLVEMENT at its finest. 1) If you wanted this "bogie robot" to operate forward/reverse, you should arrange the centrally mounted battery in a suspended cage. 2) I'd consider mounting all electronics underneath the chassis for protective measures. 3) I'd employ complete lateral symmetry. Make the front paired legs the same as the back by making this an 8-wheeled buggy. 4) Consider adding some suspension system with mini-shocks (you could design these yourself and probably will). 5) Extending the top cab portion would allow this to be useful as per a transport vehicle. 6) Ship a working model to NASA with a card reading: See, it doesn't take much engineering to make a cosmic buggy. Give me the $100 million contract and I get to keep what's left over or about $99,999.00 or so.

[@Xactant]

I have got to say that you are very creative. I have been looking at 3-D print plans for different rovers and thinking about the time required to print the needed components. Never occurred to me to use PVC. So quick - could assemble this in the time to print a single component. Great for quick prototyping. Much respect!

[@brianbrewster6532]

Hey - upon further analysis, I determined you could vastly improve the way you mount these wheels to your chassis. 1) Attach PVC tube that slips over motor and attach and upright facing PVC elbow to this. 2) From there, you join top of elbow to bottom leg of your chassis. Another improvement - to hide all your coiled black wiring. Simply solder these to the wheel motors BEFORE beginning assembly, and slip the wire inside cavity of all PVC tubing. My ideas would a) protect the motor from damage, b) keep the wires from being tangled into something that the underside of the chassis might come across, and c) prevent the notched pieces of PVC tubing (where you snaked a hose clamp through) from causing a catastrophic failure from being weakened. If the motors were run hard and showed signs of thermal warming, you could ventilate the PVC collar you slipped over them with tiny drill holes (1/16" or so). Maybe you could make Prototype # 2 of your Rocker Bogie Robot, sir, using some of these recommendations.

[@hongryuljung1268]

No components are special... But the result is AWESOME.

[@FJ348uy8j3]

Truly great design, this type of chassis can be incredibly useful for many robotic projects

[@tapasbhattacharya5582]

Aap logo ki hardwork se Indian youth technology me aage aa raha hai brilliant job

[@jonathanballoch]

this is probably one of the most inspiring youtube robots there is

[@TeamMayku]

This is an awesome project. We're going to try making some outfits for it with the FormBox!

[@mbahcarrier1629]

success always for ....."Navin".....sampean memang hebat

[@oryzasativa3184]

Sir you have different level of creative. Just awesome ideas

[@libanabbasrizvi2862]

Oryza sativa

[@قناتواحدعراقي-ش1ص]

Oryza sativa

[@GoutamKumar-rt7gb]

sahil 👌👌👌👍👍👍☺😊

[@rahulsehrawat4321]

@Talk To Tech who are you?

[@CrazyCoupleDIY]

I like the way you built it all up using just PVC pipes :)

[@Raj-mo1pi]

great! now send it to mars

[@Onerso]

OK...

[@kimbukim2799]

Greetings from Turkey. There are many videos on KZbin but what you do is great. Congratulations.

[@Sean-hz1rt]

This could be so useful for our armed forces. ..bro u need to be in DRDO...jai hind bro

[@kamikazekitten9231]

You wrong tho. also he didnt invent this. just copied it.

[@nemichand6717]

Wow bro best car 👍👍👌👌👌😊😊😊😊

[@dhruvlakra8810]

I needed some material can u help Actually the ring king of thing used to fit the motor . Please send a link

[@Status29099]

My fav experiment in this channel 😉😊

[@parveenkushwaha4281]

Can you give a link from where I can buy this wireless and remote....

[@kgssupercars7398]

I VERY VERY VERY VERY LOVE THIS VIDEO!!!!....😎😎😎😎

[@kavitachoudhary5439]

Amazing sir Make a robot like a car in which 2 persons can sit

[@namichand6445]

viresh talkar hahahahhahaa

[@plaisboardingaspaceship8493]

Kavita Choudhary h

[@alexisgt]

Do you have any ideas on how to make a power wheels two seater run faster?

[@neetuyadav6239]

Nemy Nigam आया

[@neetuyadav6239]

Nemy Nigam आयु पंसारी

[@moimoi2682]

Wow well done really well done

[@energyrovers5794]

From where to buy the wheels?

[@kunalsharma5544]

fsd

[@OliverRathonyiReusz]

you don't also happen to know the board, and motors do you?

[@abdulhameedshaik5472]

Tell me battery capacity with PVC pipes rocker boggi

[@sourabhsharma5943]

12 volts bikes or scooty battary

[@hanumantas580]

Energy Rovers

[@the.shlok__]

Things that I search in whole market today but I don't found ..1:-wheels..2:-45° angular elbow..3:-That thing (2 plates)which is used to connect a pair of wheel with another..

[@johnsikma2776]

Yes we cannot found even online marketing

[@the.shlok__]

@@johnsikma2776 *yes..Bro.I have to submit it till 30 sep but I have not started making it yet because I can't found things..*

[@FaizanKhan-cv1ur]

you should also list the product used in the video and where can we find them?

[@kumarchinchol6246]

h

[@lifeisadream9106]

Yes sir pleas tell us about their all information

[@riyapatidar6204]

See the description .In which he has given link of website you can get list of product and their link from their .

[@STEMpedia]

देसी जुगाड़, सरल एवं सराहनीय | Indian magic - simple yet appreciable. NK, you are an inspiration for STEM entrepreneurs in India :)

[@kalawatidaiya1967]

Please give links to buy all stuffs specially motor, and remote control

[@kiranaswale1251]

Please give things to buy all the stuff of specially motor and remote controller

[@tajindersaini6237]

Its Very Batter technology 👏👏👏

[@ernestoaug]

Hi friend,GENIAL. do you have the link where you buy the pieces? Wheels, motors, electronics, etc. thank you so much

[@sahilkhurana4401]

ERNESTO AUGUSTO did u get the reply from him?

[@ernestoaug]

no

[@riderpikachu7403]

In India we use Amazon or eBay

[@AMbrosWorkshopTips]

MR ANONYMOUS AliExpress

[@hamza1234510]

Great, but can do you where i can purchase the remote controler he used, by looking at other comments, some have suggested this one : robokits.co.in/control-boards/wireless-robot-controllers/rf-2.4ghz-multi-channel-remote-for-2-dc-motors-5a-drive?gclid=Cj0KCQiAjO_QBRC4ARIsAD2FsXMJex0a8ZTBq20qIdLCQb1vioGGBk2vWoWXmf4y1EG8UsyBFpRWq6EaAk9PEALw_wcB& but it is quite different from the one used in this video.

[@eugeniamuniz9844]

I love your videos, knowledge, imagination and creativity.

[@ameerdevito1835]

what a great idea. you should make the body

[@sridharthirupathi4104]

Which board

[@sajidnaushad2532]

AMbros Custom which board it is

[@kiityworld]

AMbros Custom

[@azadhamad627]

vito AJD ١

[@azadhamad627]

vito AJD ت

[@jps99]

Nice job using readily available materials!

[@sadaksk577]

what is the circuit board u have used and remote please give reply soon ... because i need to submit my project by 1 week

[@the.shlok__]

What about your project...It passes 2 years but no one replied 😂😂

[@Riders_8264]

@@the.shlok__ 😂😂😂😂

[@aishwaryasudhakar1682]

i want rocker bogie wheel inf...u have already done project know....please tell me....

[@utkarsh2301]

Channel worth subscribing. The way you connected motors with the pipes were very poor way yet very innovative. I admire. Very nice effort Navin. Could you also give me the details of the wheels you have arranged and the Motors you have used.

[@abunizar8577]

Can anyone plz tell me about the specifications of the motor used in this??? It will help me to find the right one.

[@anndrake492]

Yes!! Brilliant work. Keep on building...

[@sparx4499]

superb work and superb robot but what is the use of this robot for which work u can use this robot plz reply

[@ivaofficial2642]

TECHBOY ABHISHEK .

[@matiurrahman4537]

your car is so nice how you have made

[@asadkhan1499]

it is a stair climbing car

[@voizek]

It's for mars it's supposed to drive on mars

[@kgssupercars7398]

REALLY REALLY REALLY REALLY SUPERB!!!!....😎😎😎😎

[@declanoflynn1055]

I love the design! But I get stumped on how to make my own with a motherboard

[@dinil5566]

It's actually very easier than you think.

[@Saliraza2912]

One day you will become a great scientist

[@ModifywithManoj]

Awesome project

[@gabrieleidelman4607]

Could somebody tell me what the little piece that wraps around the motor is and where to buy it (A link would be preferred)?. I need it soon for a school project. Thanks!

[@aryanarora8580]

send link for remote control system

[@vantakulasairam5401]

PIYUSH ARORA I don't know why this guy is not replying?

[@vantakulasairam5401]

I too wanted to know the same!

[@r.gfunnyclips5513]

Mujhe bhi remote control system chahiye

[@oreotheBdcat]

It’s Aurora not Arora

[@RAHULVERMA-sx3yv]

Awesome manufacturing dude

[@themakercentral5597]

Bro this is totally amazing.... My channel does similar content in this is super interesting👊

[@Rigel0302]

Thank you so much for the inspiration and step by step instructions. I can’t wait to try it out with my kids that are very interested in STEM.

[@innocent_soul2908]

awesome 👌👌👌

[@megansheth2672]

Is there a way to access the website now? I'm looking into the rocker bogey design for my senior design project

[@shahidmsv2992]

Where i get it this remort?

[@satyamsikka6407]

BGM Life search on robokits India you will get I have already purchased

[@priyankasai6866]

+ELECTRICAL GURUJi sir did u use that remote?? Is that working? would u pls upload a pic showing how to connect motor wires to the remote channels. pls sir

[@kapiljangra25]

@@satyamsikka6407 my remote keep on disconnecting after few seconds. Have tried using new aaa batteries. New 12 v amaron battery. But nothing works. Help us please. Kindly contact on 9813719780 (watsapp also)

[@Kady3DPrinting]

Very cool, i built simple one on my channel

[@arghyabiswas8213]

From where to get the remote control

[@polelsimplex]

Pero cual es el nombre de la tarjeta. O del micro controlador

[@jonalex]

Arghya Biswas I agree. The remote system just comes out of nowhere. I know most of this can be bought at servocity.com, but I need the specs of the receiver/ transmitter

[@vipulchoubey3484]

Arghya Biswas here is the link of remote controller robokits.co.in/control-boards/wireless-robot-controllers/rf-2.4ghz-multi-channel-remote-for-2-dc-motors-5a-drive?gclid=Cj0KCQiAjO_QBRC4ARIsAD2FsXMJex0a8ZTBq20qIdLCQb1vioGGBk2vWoWXmf4y1EG8UsyBFpRWq6EaAk9PEALw_wcB&

[@bappidesai1214]

robokits.co.in/control-boards/wireless-robot-controllers/rf-2.4ghz-multi-channel-remote-for-2-dc-motors-5a-drive?gclid=EAIaIQobChMIw4vzlbWW2AIVWwwrCh16qAVfEAQYAiABEgIHSfD_BwE ithink this is the right one

[@priyankasai6866]

+Bappi Desai The remote in this link has only two channels for motor connections and one channel for power supply. But the remote shown in video has 3 channels for motors. Can i use the remote from the link. Is so howw?? Please reply me sir.

[@sanchezton]

Navin we bought the circuit board and remote from the site you mentioned. We are almost done completing this project but when we put the batteries on the remote control both lights are flashing. Yours on the video on has the NEGCON on. Are we doing something wrong?

[@sandippatil2259]

sir aap motar kahase late hi plz batayo 😎😎😎

[@jorgedanieloviedo3137]

Muy bueno son tus trabajo gracias por compartir🖒🖒🖒

[@irfanhony3179]

Wao

[@scottherman3376]

Nice Dude, Nice. Simple and Easy to start. Good Job.

[@overlordarmy8269]

Very great work done Nabin bhai. But plz tell me the name of the black device u placed on it and how to make its connections.

[@Rohit-oz1or]

Ingenious use of pvc pipes & hose clamp

[@MrNams]

Superb video, impressive presentation , thanks man

[@angelizammulig8387]

This is really helpful for everyone

[@roosboom]

The elbow pvc pipes have a larger diameter than the normal pipes. Wich one has size 25mm and what is the other diameter? Thanks!

[@jaanuhoney5931]

Does copper bearing means that ....The bearing that is equipped over the motor shaft ??? Plz respond quick

[@akshatjain6582]

sir can i get a diagram of connection...AND the type of wireless module used in this car...what will be the total expenditure to be spend on this robot...Amazing work sir...for an mechanical engineer you are a true inspiration...Great

[@НуроЗаринХан]

You should send it to Mars ! 👍🏼😊

[@satyamdubeyjii4273]

Your Ideas are at cool level

[@erwinpasia5487]

Wow! That is pretty cool Mars Rover Robot. What DC Motor Model or Specifications did you use in this project? Cheers.

[@mharif292]

You are a very clever man, all the best from the Bangladesh

[@adityadivine]

Thanks from India

[@avnirajtheindiangirl187]

I have watched all ur videos and am inspired

[@ricardozabalayoe2672]

What type of card is that? H-bridge only? Very interesting. How to get more details?

[@cryora]

Can it go up a curb when approaching at an angle instead of head on?

[@jayshelat4360]

Hello Mr. Navin, Will this robot be able to climb the "Regular stairs" which we have almost everywhere, that is 7 inches Rise and 10 inches landing?? If yes then no issue but if it can not, what can be done in such case? Awaiting your reply.

[@manigr8est]

awesomeness unleashed

[@markpottypotaseri9863]

Hey can you tell me what wires you are using for remote control (the red and black wires)

[@rani2836]

Great work brother

[@jiojio910]

Try give all details of what model motors u using etc .. so school kids can learn more from ur channel

[@Baalकलाकार]

Very skilled man

[@dhrubaray3038]

What is the knob that is attached to the mortor at 2:14 can you please tell

[@frequentlyfascinated]

What RPM are your gear motors? Slow and steady really does seem to be the way

[@wahedtany8527]

you are awesome man , brilliant job 👏👏👏👏 keep it up

[@siddharthranjansahoo4137]

Sir plz tell about the version of battery used in this model..

[@pradeep6257]

How much will it cost??

[@anandhindu2804]

@3:20 ... I don't understand why 1-screw on one-side, other has 2; just asking............. anyone can respond......... trying to understand the logic. hope you joined a team that is going to make rovers for moon/mars under ISRO!!! if not, my blessings/wishes!!!

[@premankitsenapaty6715]

Actually on the side where there are 2 screws, the wheels of that side shall move with the centre chasis holding the transmitter and all and side having one screw shall act independently. Like if there is a terrain with one side up and other side low , the rover can move with out difficulties.

[@premankitsenapaty6715]

But if there are 1 screw on each side, then there is a high risk of the centre chasis holding the battery to flip.

[@premankitsenapaty6715]

In 5:19 you see, one side there is a concrete slab and the other side is low ground and due to that particular fitting of screws, it is able to move without difficulties.

[@PromethorYT]

It might be feasible to pass the wires inside the tubing?

[@knightrider9509]

Too good! Nice video! Will try to build one for my son.

[@DIYwithBatteries]

It's incredible sir.

[@ironsmith9769]

I am so conflicted. I love what you made but I cringe at how you made it. Regardless this is a good video and it deserves a thumbs up.

[@thejanamendis9528]

Well done man

[@eduardocarlos7104]

Beautiful project for those with disabilities to get around

[@altafhussain6040]

Can u Please ..send me the list of ..equipment by which you made the Rocker Boogie .

[@mehulkainth3856]

With tyres which type of motor are you using please clarify tyre and motor arrangement in detail.

[@Talha80777]

What lengths have u used to make roof part(upper part with 4 pipes)?

[@timothym2241]

Great job. Are the motors running at 100 percent speed in the video?

[@Explorewithmefrist]

Which motor they usee..and could tell it's ratings

[@Pavan_KalyanK]

It's superb broo....... Plz give me the description of every thing that used to make that mover Plz....

[@siddalingammatambake3302]

It's really good but i didn't get the things you used.1st one is the green box and the chip that you kept in the middle and which connects the circuit.

[@krishnavenips5390]

Great idea.. how much it costs??

[@sniperlater]

Nice work bro!

[@RineshAndrews]

Excellent work !

[@ritimjain892]

Amazing 😃😃

[@NeelamKumari-fw1im]

Can I use bo motor( gearbox) and thin pipes? Would this work with power bank instead of 12v rechargeable battery?

[@vantakulasairam5401]

Yes! Definitely

[@shivanshmourya4586]

Amazing superb wonderful