How to Make A Mobile Multi Frequency Jammer

[@ETHANWHATSUP]

Sweet. The breadboard is shaped like bread.

[@bmetal21]

Great video. My only suggestion would be to add a wiring schematic and maybe a list of parts?

[@Mc-en3hr]

The CC1101 is a low-cost sub- 1 GHz transceiver designed for very low-power wireless applications. The circuit is mainly intended for the ISM (Industrial, Scientific and Medical) and SRD (Short Range Device) frequency bands at 315, 433, 868, and 915 MHz, but can easily be programmed for operation at otherfrequencies in the 300-348 MHz, 387-464 MHz and 779-928 MHz bands. Features input voltage :3.3V maximum operating speed: 500kbps, support 2-FSK, GFSK and MSK modulation can be modify the baud rate, power, frequency and other related parameters by software high sensitivity (

[@meridianstrat]

Ed Sheeran went back in time and chose a different career path apparently?

[@Brains933]

Ha that's a new one

[@AbhayKumarPaswan-dn1pf]

😂

[@Duxuuuu]

Nahh that’s Simon Pegg

[@tntomega]

No imagination at all dude...

[@jdw9655]

Its crazy how easy things like this are to make!!!! Between this and how any lock can be picked in seconds of horrifying

[@Sidk444]

you mean the flipper zero?

[@RenoSimpson]

@@Sidk444 I'm pretty sure he means "bump key"

[@mayanksingh9528]

What is the range of this jammer

[@Sidk444]

2cm

[@Brains933]

Not far off

[@duanemyhre]

Great video! Can you please provide links to the parts used? I want to understand the construction.

[@Maple-Sizzurp]

Can this do frequency ranges instead of one solid mhz

[@ContingencyLabs]

When you define a frequency, are you defining only that particular frequency (433) or a band that is centered on that frequency (say 400-460ish)? If it does define a band, how do you tune within the band? If it does not define a band, is there a module that you would recommend with that kind of tuning capability?

[@BILBO1]

Very good. I’m a little late to the party, but thanks for sharing!

[@brian95240]

Great video! I have been wondering how someone could make an LRAD (Long Range Accoustic Device). Could creating "sound lazers" be easily done? It would be neat to be able to transmit a lightly spoken word or even a whisper to an individual across a large field; no one else would be able to hear it.

[@Brains933]

I am not sure, maybe though I'm not sure how you would channel it

[@markmikhail4279]

You can with ultrasonic transducer arrays;)

[@brian95240]

@@markmikhail4279 has anyone uploaded any schematics or instructions for it anywhere? If so, that would be great to check out!

[@nickusenko1348]

@@brian95240 bitluni made a video about sonar arrays that might be a good place to start for you

[@brian95240]

@@nickusenko1348 Thanks a ton! I'm going to look now.

[@daleflaherty]

Fantastic video, How far would this reach? a house? cluster of houses ect...?

[@sheikhsadi395]

Can u plz provide the circuit diagram and component details? Im trying to make it in my Engineering project

[@Chamsdlr]

does it work with 1800 mhz?

[@d4ve587]

I've no clue what's going on, but it's fascinating 🤣

[@pierpa_76pierpaolo]

How much does it cost? What functions does it have? Interesting for educational purposes. :) Where did you purchase it? Thank you.

[@jessen00001]

Awesome thanks 🎉

[@saniulalamnibir8274]

Hello mate! Another great video! (hats off) Thank you so much! My supervisor gave me this project but I couldn't find any useful tuitorials on the web! But can you please make another video and elaborate this one? I really hoped you would be doing this project on a bread board, because that would have been really helpful for students like me. If you have the time to spare please make another video.( I would be really greatful! As my final year project depends on it!) And if not can you atleast tell the connections between the pins? Thanks for your support and help!

[@eyyubaydin1370]

#include #include #include #if defined(__AVR_ATmega2560__) || defined(__AVR_ATmega1280__) #define CC1101Interrupt 4 // Pin 19 #define CC1101_GDO0 19 #elif defined(__MK64FX512__) // Teensy 3.5 #define CC1101Interrupt 9 // Pin 9 #define CC1101_GDO0 9 #else #define CC1101Interrupt 0 // Pin 2 #define CC1101_GDO0 2 #endif CC1101 radio; byte syncWord[2] = {199, 10}; bool packetWaiting; unsigned long lastSend = 0; unsigned int sendDelay = 0; void setup() { radio.init(); radio.setSyncWord(syncWord); radio.setCarrierFreq(CFREQ_433); radio.disableAddressCheck(); radio.setTxPowerAmp(PA_LongDistance); } void loop() { const char *message = "Hello world!"; CCPACKET packet; // We also need to include the 0 byte at the end of the string packet.length = strlen(message) + 1; strncpy((char *) packet.data, message, packet.length); radio.sendData(packet); } Code that he is using dont forget to download the packages from the github! And this one is the schematic for the C1101 www.aeq-web.com/arduino-10mw-cc1101-ism-rf-transceiver/?lang=en

[@nicolagillis500]

hi did youmanage to get the builkd instructions for a breadboard?

[@eyyubaydin1370]

@@nicolagillis500 i am searching for that too if i will find it i will paste it here.

[@Brains933]

I have put how to wire up the pins in the description hopefully this helps in the mean time

[@shanmugasundaram.n3964]

@@Brains933 plz plz plz sir i am from india i cant understand ur discription pins plz give it in a animated format

[@jessen00001]

Have you tested this on a phone ? I would think that it shut block 800 - 1900 MHz to block gsm?

[@unofficialengineer9463]

How can I acheive diff frequencies like frequency between 800 MHz to 2300MHz plzz help

[@richardmurphy8764]

Are you using a 3v Arduino ? Everything I’m reading about the cc1101 says it won’t take 5v from input/output pins. Also what sort of range have you tested this to ?

[@thecarnosaurchannel2819]

Now i can bypass my neighbours alarm and rob 3M tax free usd

[@omsingharjit]

Can you make RF SA using magical module Si4463 or 32 With wide band sweeping capability and Also a rf signal source using arduino, esp, pi?and gui tft display?

[@keithking1985]

I wonder if an Arduino program that scan's then jams signals it receives.. or 2 Arduinos.. one scanning and the other jamming... Oh that wouldn't work will it.. No.. But could something like that be used to jam frequency hoping signal's.. Military technology is dodgy to discuss. 😅

[@Brains933]

That is possible...might do a video on it

[@keithking1985]

You should. It's crazy interesting stuff plus you you have a great set up for testing too. 👍🇮🇪

[@prathamesh602]

How cc1101 jam the frequency please show that

[@savvydad8601]

Thank you!

[@740bucksmackers3]

Can something be made that would keep samcera GPS and dual dash camera from working

[@anthonyrickardii6198]

Pretty awesome and impressive. Question? On the receiver, is it possible to use a xbee instead?

[@owencassidy7711]

Can I just buy a finished one from you ?

[@OneOfUs12]

Does anyone of you guys tried to implement the same approach by using NRF24L01? I am looking for Arduino code changes required.

[@pandupradana1431]

make implant transmitter jammer

[@imloo7686]

Hello brains I have an rc car how can I find its frequency according to the manufacturer it is 2.4ghz but I am not sure what it’s band

[@richardhenry371]

How can I create a unit to block a 2 mile or more radius.

[@beautifulsmall]

Can it stop russian tank comms and gps

[@kourosh4197]

Excellent 👍

[@CB-RADlO-UK]

hello man , please can you provide the pins connection between arduino nano and the CC1101 ?

[@ayskendee5693]

Make another video about RF modules for arduino Also if other modules could perform the same function 😍😍

[@user-mi6ht9lm1n]

hi sir can i use nrf24 instead of cc1101I am so sorry that CC1101 is not available in my city

[@harrysappington2951]

do you have a tutorial on making a jammer for sub woofers

[@Brains933]

Unless it is wireless you cant do much to subwoofer with my kit

[@KaraS1]

Someone has an asshole neighbor. The best legal solution is an 8 AM retaliation after their late night with something obnoxious. Anything on the Gitmo playlist at 11 equally loud.

[@harrysmokes9265]

Could you make this with an uno without the power board?

[@spaceadventurer100b8]

Hi. I’m a newbie and would like a ready made drone jammer to stop it prying in the house and garden . Is there any pre programmed modules to buy and or build. Thanks for any help.

[@m4d_al3x]

You have to see how the drone communicates with the pilot. If its wifi, which is common, you can try using a esp wifi deauther (lots of tutorials on youtube, cost 2-5€).

[@egrif9303]

How can i jam a DAB uk radio signal to annoy my dad who loves upsetting lots of people PLEASE? I'm really desperate thanks.

[@aandscrawfoski]

Hi there. Re drones and security. Boundary security is important at my farm .Can you kindly help with a raspberry pi or similar land F band radar unit please? Diy boundary radar theses days is important . Adding a 360 degree rotating co linear panel antenna with a linear 10w Rf output including code for size of object differential algorithm (bird, drone,man or car ) at 700m would be awesome. Im happy to buy a radar kit on your web site ( F band ) pre programed would be fantastic. I can also be keen buy the Gerber file for printing the 18 inch x 18 inch co linear array PCB and have your filter plus a tuned circuit design fitted to pcb aerial. Have potchers on farm problems. Thanks mate for your videos From Andrew

[@vitaliim9393]

Hi! It's a nice idea, just I'm looking for bluetooth jammer, as I see this device is not in range bluetooth, or I'm wrong? Probaply you coud advice some solution - my neighbor use bluetooth loudspecker at night..

[@MCMinerHQ]

Vitalii M bluetooth is wifi so you can find the frequency and set it in the program. Set an interval so it jams on and off so they think thier shit broken 😂

[@shanmugasundaram.n3964]

Sir plz plz give the circuit diagram clearly plz plz plz plz sir

[@habbievara9934]

Sorry Mr, which application used to check frequency during your demonstration

[@nicolagillis500]

hi grant could you please amend or add showing how to do this using a standard breadboard so i know where to put all my wires thanks

[@Brains933]

Yeah I am going to do a Breadboard video soon but if you look at the code from Github it has the wiring and pin numbers at the top. I have also put them in the description

[@user-nl2lf2bq5v]

What is the software you use for frequency analysis?

[@jemussi7842]

transmit a square wave to properly blast them!

[@17people64]

Would this accidentally interfere on my neighbor's stereo? If so, how? Many thanks in advance!

[@mrbillybigrig8487]

Do you have anything on making a radar/laser jammer /blocker TY

[@Dannydawson537]

Hi grant just doing this on my laptop now is there a way to send the (hello word) faster ? I set the send delay to 0 but that’s not affected the send speed ? Any ideas pal

[@ERRTCP]

does this jam mobile phone signal?

[@ketanbhole8748]

What is that par distribution modul ?

[@frequencywatchers]

Why Every Ardurino And Other Similar Type Of Pcb`s Have 45 Degree Ic's?

[@MENSA.lady2]

I can legally transmit 400 Watts of RF at 433 MHz. as holder of an Amateur Radio licence. It will walk all over your punt little jammer

[@ahmedybucheery8906]

Greetings fam, Can you please share detailed wire/devices connections info? Very impressive.

[@eyyubaydin1370]

#include #include #include #if defined(__AVR_ATmega2560__) || defined(__AVR_ATmega1280__) #define CC1101Interrupt 4 // Pin 19 #define CC1101_GDO0 19 #elif defined(__MK64FX512__) // Teensy 3.5 #define CC1101Interrupt 9 // Pin 9 #define CC1101_GDO0 9 #else #define CC1101Interrupt 0 // Pin 2 #define CC1101_GDO0 2 #endif CC1101 radio; byte syncWord[2] = {199, 10}; bool packetWaiting; unsigned long lastSend = 0; unsigned int sendDelay = 0; void setup() { radio.init(); radio.setSyncWord(syncWord); radio.setCarrierFreq(CFREQ_433); radio.disableAddressCheck(); radio.setTxPowerAmp(PA_LongDistance); } void loop() { const char *message = "Hello world!"; CCPACKET packet; // We also need to include the 0 byte at the end of the string packet.length = strlen(message) + 1; strncpy((char *) packet.data, message, packet.length); radio.sendData(packet); } Code that he is using dont forget to download the packages from the github! And this one is the schematic for the C1101 www.aeq-web.com/arduino-10mw-cc1101-ism-rf-transceiver/?lang=en

[@aeromaker_fpv]

mind as well use it for something lol

[@jeffereyjones7894]

Can you make me a jammer to jam 13.56 Mhz signal???

[@Brains933]

Why 13.56?

[@jeffereyjones7894]

@@Brains933 cause I was wanting to do a project.

[@Brains933]

That's in the HF range range. I think used by RFID readers. The antenna for that is pretty big

[@jeffereyjones7894]

@@Brains933 what components would I need

[@jeffereyjones7894]

So are the components for the 433 the same for the 13.56

[@nopopaul7480]

Hey tech guy can you make me one of those little thing that can destroy my chips on my body,please?

[@emadalawami12]

Does it jam the Downlike for GSM Which is the 960 Mhz ? Cuz i saw the data sheet for cc1101 it says the max frequency is 915Mhz which is the uplink for GSM Please I Need help as soon as possible for graduation project

[@Brains933]

No it wont be able to hit the down link for GSM

[@emadalawami12]

@@Brains933 thanks for replying If i build such a project is it gonna jam 2G mobile phones? I have no time to try it so i need help

[@Brains933]

It could. Although if you are just wanting to interrupt 2G GSM phones and have access to good SDRs you can set up a fake base station and DOS the phones that way

[@mickswagger8214]

Can I buy one ready made?

[@Savage.735]

how can i make a 315 mhz jammer

[@travis8623]

Why does the circuit board look like the same shape as bread and called a bread board? 😂

[@Brains933]

Breadboard is just another term for a prototyping board for a circuit and someone at a security conference made that as a badge

[@bharathib7311]

Can we use nrf24l01 module instead of cc1101 module bro....😁

[@micahwilcox3163]

can it jam CDMA

[@roberthullock3568]

This would be criminal, illegal in most places. As in jail time. Also, not difficult to track with simple equipment, like any other interfering gear

[@Brains933]

Correct. I believe I mentioned that in the video. I also have a video talking about why they are illegal and as you pointed out that they are easy to find.

[@dividedwefall9113]

You never get jail time for this in the US... I'm very familiar with us laws/justice system. At most, you'll recieve a fine. That is unless it's used in the commission of another crime.... You guys kill me- constantly crying "THATS ILLEGAL!" I live my life and base my actions on what I feel is right or wrong! Its pathetic how the sheep do as they're told... No chains needed... They know you won't dare escape or even think about breaking masters rules.

[@kellanlaw3984]

Greetings from Florida! I wanted to ask, so I have everything set up correctly and working (as well as an SDR to monitor transmissions) how exactly do you change the frequency? I've been searching for hours on how to and it only seems like I can do it off of some TI software through the registry. I've tried just simply changing the code radio.setCarrierFreq(CFREQ_868) to whatever I want but it doesn't seem to verify correctly because it doesn't recognize the new frequency, any ideas on what I'm doing wrong?

[@Brains933]

I dont have the code in front of me but I would double check the documentation to make sure you are using the correct commands. I will have a look when I get a chance :)

[@kellanlaw3984]

@@Brains933 Alrighty I'll check again, thanks for the reply! Keep up the great work!

[@kellanlaw3984]

@@Brains933 So I actually just figured it out, the way I managed to do it was by first downloading the SmartRF software by TI, finding the CC1101 on the screen, clicking it and choosing "open RF device in offline mode" and then from there it should show you a screen and to the right (you'll need to enable RF Parameters and Register View in the View setting at the top) you'll be able to choose FREQ0, FREQ1, and FREQ2. You'll need the value hex code later. You then simply change the base frequency on the screen to whatever you want, go into the CC1101.h file in the library and then choose one of the frequencies you don't mind getting rid of and simply changing their values in the file. (Just leave it the same name or you may have problems whenever you choose it using the CFREQ_ command). After that simply edit it in the main arduino coding to the frequency in which you edited. Now I may have done this entirely wrong since I'm not the best at understanding script but I did manage to get it done if anyone else has this issue. It would be great if someone could make a library with a bunch of channels together for easy changing. Anyways, cheers!

[@CHASINGPROFITS]

keelan where in florida are you?

[@tfoster32]

What's the range?

[@TheMrjohnson84]

How much to make me one and mail it to San Diego, California??

[@achmaddulfaridhaqiqi8649]

UNTUK RADIO FM BISA KAH YA GAN ?

[@victorsalvinoborges1783]

Hello from Brazil, I have a question, does it work for bluetooth? What is the simplest way to do it for bluetooth?

[@Nexalian_Gamer]

Wi-Fi and Bluetooth both operate on the 2.54ghz spectrum, although some Wi-Fi also works on the 5ghz spectrum. So if you jam the 2.4ghz Wi-Fi you'll also jam Bluetooth.

[@shanmugasundaram.n3964]

Plz give the circuit diagram

[@ayan.debnath]

I am new.... what software is that? Free?

[@MrRed-yx8bp]

Program bro

[@nathanielclark-wright1531]

Does anybody know what software he is using to measure the signal strength in corner? 🌻

[@Brains933]

It was a while ago. It was just some SDR software. Might have been SDR#

[@PhathisizweJokozela]

Kindly send schemtatics

[@patrickwilliams5307]

I have an idea, can You build me the same item? Programed and everything just need to power up.

[@Brains933]

No

[@DJJAW11]

... Could you make me a radio jammer !

[@Brains933]

No, these devices are illegal where I live without the proper permissions and therefore I cant supply or help people build them.

[@TamLe-si7wm]

What is the name of the software he use in the video guys??

[@Brains933]

CubicSDR

[@BrittanyBbabyy]

Can you make me one I'll buy it

[@bossnimbus]

Sir i need parts names

[@pouloukki702]

Hi i need your help to build laser jammer high distance for p0l1cE radar. I need to dedect the signal send to my car pamper from p0l1ce laser radar. Need to dedect the signal from 750nm-1000nm ligth but with mhz signal from 10mhz- 3000mhz. The minimum distance must to be 1000km. Am wondering if this what am asking can be real. I don't care if is legal or not. I am from Cyprus everything is legal and everything is not😂

[@tflcan3724]

Friends, I warn those who want to do this project using an amplifier. You cannot go above 928 Mhz.

[@executorarktanis2323]

Need a amplifier with range above 928 MHz right

[@brothersandsisters5262]

where can I get a cheap power distribution module? anyone?

[@Brains933]

I believe I got that one from amazon

[@brothersandsisters5262]

@@Brains933 Could you link me one that you would recommend? (preferably the cheapest one possible)

[@sargismartirosyan9946]

Wow ! 😮😮 Fr i like arduino af Im arduino fan lol Uk ok seriously so can it create like 5Ghz ? Or 2.4 wifi Ghz ?

[@AkunAp1111-hs9ln]

please tutorial use esp8266

[@Computerbastler27]

Have you PCB Layout ?

[@Brains933]

There is circuit diagram on the discord server but no PCB Layout because I was using proto board and it was not that well planned out.

[@Computerbastler27]

@@Brains933 oky jamming freqenzy 868.958 mhz on C1101 ?

[@Computerbastler27]

@@Brains933 runing on Nano ?

[@Brains933]

Yes and yes, though you can change the frequency from 433Mhz, 800 and 900mhz

[@Computerbastler27]

@@Brains933 900 ist to higt muss jamming 868.958 mhz kann offset on C1101 freuqenzy offset

[@NIGHTMARERICA]

How much to buy something like this? If say I have a POS creep neighbor who uses drones to spy on my family could something be made to stop him?

[@roncaruso931]

So, why would people spend money for these and build them? Hmmm

[@chetpresley8479]

Will you sell me one

[@paulvornicu6104]

Can you build me one that jams wifi and all cellphones battery based 100 meter range

[@haroldvonhelms8304]

COULD I BUY A MULTI FREQUENCY AMMER FROM YOU MAKER VLOG I HAVE A PRIVATE EYE SCRUING WITH ME BAD

[@WorkFromHome-th2eq]

Can you do RF cloning with this?

[@Just_Another_Sunday]

That's usually what people use to steal cars. The program he was running showed what frequency his key fob was. This is strictly a 433mhz chip so you'd need a chip that can change frequencies if you want to clone.

[@robertochavez6569]

how to make a freq jammer..

[@mikemule1964]

Please make a WiFi jammer tutorial

[@washingtonstatepicker3460]

27.000 mghz?

[@Brains933]

27Mhz is within the HF frequency range and way to low for this device

[@bobsnabby2298]

Why do you need a jammer device, for what? Why to support making illegal electronics to make people life miserable? Use your time to do something good.