How to make a Neon Sign | A Beginner to Pro Tutorial

[@prasadj2k]

This is so neat. I have learned so many tricks from this video. Best DIY Neon Sign video on KZbin. Thanks for sharing, mate.

[@khaistneonarts]

Thank you so much Brother for your appreciation ❤️

[@ResinClassics]

There are so many videos on neon art but most of them dont show the real work. Thanks for sharing such a nice video

[@khaistneonarts]

Thank you so much. means a lot

[@gopaltidke9705]

Yes it's unique ❤

[@myronlasko3768]

the fact that neon tubing is not glass makes this a safe art medium to explore. Can't wait. Thanks again for detailing the whole process!

[@khaistneonarts]

Yes brother this is very safe to use. You are always welcome

[@suzaq5022]

This looks like a lot of fun! Would you be kind enough to share your materials (namely the led & wiring). Thanks!

[@khaistneonarts]

I already shown all material names in the start of video. This is Neon LED Strip, and you can use any thin transparent wire for wiring

[@HappyGlobe-qb5ws]

​@@khaistneonarts or strip ko jorna jis k sath us ka name?

[@khaistneonarts]

@@HappyGlobe-qb5ws i am using super glue for this work

[@HazelLewis-j3i]

Thanks for sharing you knowledge very inspiring

[@khaistneonarts]

You are always welcome. Thanks for your appreciation 😊

[@TARUNJAGGI]

pls tell which wire is that | Transparent is it a copper wire !! because i generaly use that red black white whill will not look good

[@zeebakeshop]

Thank you so much for sharing… please how thick is the acrylic used, is it 3mm or 4mm

[@khaistneonarts]

This is 5mm sheet. You can use 4mm also if sign is small

[@dongskirojas]

Thanks I have now an idea because of you. Thank you for sharing your talent and knowledge ❤😊😊

[@khaistneonarts]

You are most welcome

[@daringrosser6242]

After watching, I feel like the answer is NO.....but......... Do I need to buy NEON/LED Rope that is advertised as "Cuttable"? It seems to me that standard, RGB Neon Rope of any length will do the job.....Single color or One Color at a time, full spectrum. The RGB+IC looks like "Cuttable" is the only way since each section can be controlled independently. Am I on the right track? Thanks!!

[@khaistneonarts]

Yes brother 100% Right.

[@16abrm]

Thank you for this! Such great teaching and better understanding. The entire sign is seamless! Perfection!

[@khaistneonarts]

Thank you so much dear. Love to see such nice comments 🌹

[@user-madmusic4badlife]

How much maximum length I can powered up with 12V?

[@khaistneonarts]

I used 12v 5amp power supply for this project. If the sign is big then you can use 12v 8amp supply. 12v is constant only ampere is changed according to size of neon sign.

[@brandonkubenka6439]

@@khaistneonartswhat size wire are you using on your jumpers?

[@DaylohYT]

I really want to know how did you make the acrylic sign. I have been looking all over for answers and everyone is gatekeeping how to make a file for laser cutting or shops to use.

[@khaistneonarts]

Brother making file in computer is a lengthy process. Will try to upload a video on this topic soon. In coming month more videos are coming

[@Тех_Сервис]

Please tell me What kind of glue can be used to glue neon tape to plexiglass and a silicone plug to the tape? I tried to glue the plug to the tape, but it doesn't stick((

[@everydaysgrind2734]

What an astonishing video Sir! I have a question: How do you come up with the size of the acrylic „base“. How thick does the base have to be and how do you come up with the space between Stripe and Neon Tube so it looks nice? Thank you very much for this video and sharing your craft 🤝

[@khaistneonarts]

Thank you for appreciation brother. Acrylic sheet thickness must be atleast 5mm.

[@bethanysmith1781]

Do you countersink your acrylic where your lights are going or glue them directly to the acrylic? Also, have you found a specific type of superglue works better than others? Thanks 😊

[@khaistneonarts]

Glue them directly to the acrylic. Yes we have a better glue. It make the work ao easier for us.

[@noavy]

@@khaistneonarts Love the Video! what is the name i¡of that Glue ?

[@huynguyen-gn3nc]

IT a great things to learn Thanks Bro, All the Best to You 👍👍✨✨✨✨

[@khaistneonarts]

Thank you so much brother

[@topandrun126]

As simple it may look for a beginner this would be a difficult task this would required some experience and skills. Great work it looks amazing.

[@khaistneonarts]

Yes brother it is little difficult for beginner but practice makes a man perfect. Thank for liking my work ❤️

[@Тех_Сервис]

and if the cut point on the neon does not coincide, then where can you cut the tape so that you can bring the end of the tape butt to the next letter?

[@khaistneonarts]

If there is little difference then don't follow the line. Make letter little bigger. I Will show this trick in next video soon 😊

[@myronlasko3768]

totally amazing! Almost looks like it is doable. Many thanks!!!!

[@khaistneonarts]

Thank you so much dear

[@laurentmeus6981]

Very nice work, excellent tutorial, congratulations 👍 I saw that you responded to all the messages ! respect !

[@khaistneonarts]

Thank you so much for your appreciation. Its honor for me that such lovely peoples are watching my videos and doing comments. How can I ignore them??

[@laurentmeus6981]

@@khaistneonarts "How can I ignore them??" Yes is true, You are a good person.

[@alinkkootaishi]

agree with you sir 🙏🏾 … respect to you mr @khaistneonarts 🙏🏾

[@Baro_San]

please answer how do you do the electrical. usb or plug? crucial info. resistors? what?

[@khaistneonarts]

Brother connect DC adapter with +ve and - ve side. No need for resistor or any thing

[@gajo_tv]

Thanks sa napaka-informative na DIY Neon sign-making 💕 More power!

[@khaistneonarts]

Thank you so much 😊

[@hansjhl]

🙂Thanks for your video and nice sign. The letters are very beautiful, which font do you use.

[@khaistneonarts]

This is Barosaki Script Regular Font, don't forget to subscribe brother :)

[@whatyouhavetodowithitdx8cc]

Hello! Hope you're doing well; My laptop is of an older version. It's 8.1 windows. So, I want to know if there is any alternative app or software for making aclyaric background. Please do consider my comment.

[@khaistneonarts]

Brother u can use an older version of Adobe illustrator or coral draw. Try older version I hope it will solve your problem 😊

[@myronlasko3768]

can hardly wait to get into this medium. Just need to noodle a suitable theme. Did you CNC the neon channel and outline? Guess masking tape could be used to position neon pieces on a flat acrylic background.

[@khaistneonarts]

No dear I just cut and marked acrylic sheet with laser machine after making design on computer. Masking tape can not hold neon strip, better u use super glue.

[@TFBTom]

wow i love that :) great video with the real work behind it. looks amazing ty

[@khaistneonarts]

Thank you so much for your appreciation. You are welcome ❤️

[@aadilhussain8173]

Which font is that you used? And which machine you used to cut the sheet ? Please respond ❤

[@debayanghosh9228]

Superglue melts when its hot. So, suppose a sign made like this is put somewhere where sunlight falls directly on the board in the daytime, will that be an issue?

[@khaistneonarts]

Brother i dont know which type of super glue you are using. The super glue I used in this video is dry and strong and is suitable for both indoor and outdoor work

[@debayanghosh9228]

@khaistneonarts Oh I was just talking about Fevi Quick. You didn't show the brand so I didn't know. What glue did you use?

[@michellestilkey3217]

This was really impressive. I like doing things myself but clearly ALOT more goes in to these signs than one would think. Now it wouldn't bother me to pay a higher price for a quality neon sign

[@khaistneonarts]

Thank you so much dear ❤️

[@Ajay_Ki_Seema]

Sir please give a link of neon strip light for 2.5cm cutting point or less. And sir is there any way to cut acrylic sheet without machine

[@khaistneonarts]

I buy this neon from local market. So i dont know any authentic online seller. Yes you can cut acrylic sheet with band saw or jeweler's saw

[@enzowelvaert4595]

What kind of led strip is this? 5v(1cm intervals, 12v(2.5cm intervals)or 24v(7cm intervals)?

[@khaistneonarts]

@@enzowelvaert4595 5V with 2.54cm

[@MaxwellDjanie]

Please line on the acrylic where you are inserting the neon strip do i have to create that too

[@khaistneonarts]

Brother i follow the design on acrylic sheet. You also have to follow the line so that your design is perfect. If you don't draw design on acrylic sheet then you don't know what to do and where to cut.

[@valkyrieschweiger1152]

Im a newbie, I haven't tried this art yet. Im just wondering if you have a tutorial on how did you connect all the strips that were cut. Did you make a single line or wire. Im sorry Im not into circuitry.

[@khaistneonarts]

Dear i already shown in video how to connect all the strips together.

[@ifrahsaleem269]

@khaistneonarts I have a neon sign like this in yellow but I wanted it in warm white. Can I spraypaint white over the yellow silicon to get that affect?

[@khaistneonarts]

If you spray paint it, it will block light. U will see yellow light but it will be very dim.

[@ifrahsaleem269]

@@khaistneonarts is there any way to change the color without changing the silicon then?

[@khaistneonarts]

make turmeric solution and apply on little part of neon. Check if it changes color then apply on all neon.

[@ajlanis]

Can y share link for the glue y using

[@khaistneonarts]

I bought this glue from local market in pakistan. Not available on online flatform. You can buy any Super glue on amazon. First try on a sheet if it is working good then u can start your project. Buy 2 to 3 glues and select the one with good result

[@deatheartmx]

Hello, can two different calibers be used? 22 for neon and 20 for the general connection? or use 22 for everything, thanks (I need to practice soldering, I always burn the copper parts)

[@khaistneonarts]

Welcome... Yes brother you can use these callibers. To avoid burning of copper parts you must use good quality of neon strip, Soldering wire and use right Solder. If you are using high voltage solder then it will burn copper parts. I use 40 watt solder for soldering.

[@khaistneonarts]

In first days you will not be able to solder connections. It will take some time. Just keep practicing 😊

[@Nakazera]

Hello, what do you use to cut the tiny trench to put the led in ?

[@khaistneonarts]

brother i did not get your question.

[@vishnubhupathi428]

what are the small wires called that you used to attach to neon lights?? Would really appreciate if you could let me know

[@khaistneonarts]

Brother i buy this in local market. You can search on Amazon. I will soon open my Amazon account, then all these items will be available on my store. Will share link in coming video.

[@vishnubhupathi428]

@@khaistneonarts what is the name of the wire

[@sayonsok2230]

Where did you purchased the acrylic sheet and how did you cut it

[@khaistneonarts]

I cut acrylic sheet in local market. This design is cut my laser machine

[@sayonsok2230]

@khaistneonarts Thank you

[@nesnoumesain]

Amazing video. Thank you, do you know if this would work with rgb wires the same way? Or does it work only in setups with two wires.?

[@khaistneonarts]

Yes brother this method work for both rgb strips. Will make video on that topic soon 😊

[@abhilashs9178]

Can you please tell me were can i get that transparent wire

[@khaistneonarts]

I found this wire here in local market in dubai. You can get this wire from sign board making companies. I did not see this in online shops. I am going to make an online shop, all the materials will be availabe on that shop. Will share link in new video 😊

[@mickeyleon5876]

What size strip is that? I tried ordering my own and it's really skinny not thick how that light strip

[@khaistneonarts]

Yes ordering online always have this problem. If neon is available near you then go and check it. I dont buy online bcz i face same issues like you. If you want neon I can arrange for you here in dubai

[@khaistneonarts]

Size of strip is 6mm but very good quality strip and bright light

[@MandyNapier-y4z]

What glue do you use?! The ones I've tried leave a cloudy hue behind

[@khaistneonarts]

Yes this is big problem with super glues. I am using "Quickfix super Glue". This glue is better and leave 80% less hue than other glues.

[@FoodBrasil]

youre the best! Thanks for the learning, I will do my first neon sign and let you know!!

[@khaistneonarts]

Thanks brother for appreciation. Best of luck Brother ❤️

[@MalevolentEvol]

Is there specific attributes you look for when choosing a font to use?

[@khaistneonarts]

I choose a font which is suitable for neon sign. When u got enough experience then u know which font to use and which not to use

[@syrennon5149]

do you think that this would work with an LED powered by a remote? sorry if its a dumb question, this is my first time making a thing like this and i want to make sure im doing it right

[@khaistneonarts]

Yes all the process is same. You have to connect +ve wire with positive and - ve side with negative wires. Will soon make a video on this topic

[@syrennon5149]

@khaistneonarts thank you!

[@Boufonamong]

Hey man some advice for one I'm making in my home, the led strip you use, you seem to just cut it anywhere and from I can tell I see solder points, is that due to that specific strip or do all of them that style allow you to cut anywhere

[@khaistneonarts]

No brother all Led Noen strips have cutting points. Some have 1cm cutting point some have 2.5cm.This strip have 1 inch(2.5cm) cutting/Soldering points.

[@leonardoattorri2062]

​@@khaistneonartsbut if there are points indicated where to cut, how do you cut exactly at the point where the letter ends?

[@MousesMortar]

@@leonardoattorri2062u can easely check that during designing in illustrator/coreldraw

[@FernandoRojas-sl3gc]

You cut on the black strip that u see on the led

[@emeyti8076]

What are the laser specifications needed for cutting these acrylic sheets?

[@khaistneonarts]

I cut this sheet with 120 watt co2 laser machine. You can search laser citting machines online too

[@emeyti8076]

@@khaistneonarts thanks 😀

[@yorganyog]

Dear friend. You cut wherever you want? I see some neon strips where I can only cut in 5cm each. Anothers I can only cut 100cm each. I dont understand wich strip you have.

[@khaistneonarts]

There are so many types of neon strip with different cutting points. The one i used in this video is having 2.5cm cutting points

[@enzowelvaert4595]

​@@khaistneonartsdo you look at the cutting points? Of do you randomly cut them and start from a cutting point again?

[@RogerSwiss_]

where and how you cut the acrilic sheet?

[@khaistneonarts]

I make design on computer and then I cut acrylic sheet on laser machine using that design.

[@soapyvanshoey]

Great job. Hi, i have a problem with my neon light. There two lengths of wires with metal plugs that go into a spitter into a transformer when i connect one in it turns the light off when the two are connected the light switch won't turn off any ideas whats wrong?

[@khaistneonarts]

Brother make a video and send to my whatsapp. Will help you but let me check the problem.

[@khaistneonarts]

In some neon strip positive and negative are changed. In some strips positive connections are on top and some have +ve connection at the bottom of strip. First check the connections maybe your problem is solved

[@Lemssy_MMDX]

This make me fall in love with what I want to get into ❤ wish me success

[@khaistneonarts]

Thank you so much for liking it. Wish you best of luck dear 😊

[@MultiLalo78]

Que tipo de cable y calibre usas para las conexiones?

[@khaistneonarts]

This is transparent wire with 2mm thickness. It will be soon available on my amazon store

[@OluchiByLisa]

Hello, Hope all is well I'm reaching out to see if I can pay you to make me a sign? I looked at the video and it seemed like it's easy except I don't understand the back part the sottering.

[@deepaknanda1113]

Its soldering ,connecting 12 volt point in all parallel for dc power supply

[@khaistneonarts]

I can make design for you but i never made for a customer who is so much far away. If possible to deliver you with courier service then i will definitely make for you. Sorry for late reply.

[@callmedad3259]

Hlo can u provide me best neon light on line which one should i buy

[@khaistneonarts]

There are so much brands but before buying i test the quality of neon strip. Most of the time you will get low quality neon. I do not prefer online buying personally bcz so many times I got low quality

[@chiru___9652]

Bro can u send that wire link and that wire gauge also

[@khaistneonarts]

Brother i buy this wire in local market. Its guage is 2mm. Soon it will be available on my amazon store. I will share link soon

[@chiru___9652]

@@khaistneonarts ok bro send the link

[@cassandragracia6317]

⁠@@khaistneonarts do you have the link to your Amazon store? I'd like a link to the electrical wire needed for this project. I'm having a hard time finding it on Amazon. Thank you!

[@EdgarGonzalez-q4w]

Excelente trabajo gracias por compartir , solo tengo una duda como haces para que salga en una sola pieza el acrílico? Cuando haces el formato como haces el contorno de la letra ?

[@khaistneonarts]

I use Adobe illustrator for making my designs. You can search in KZbin how to make outline for letters in adobe illustrator. There are many videos on this topic. I can not tell u the process in coment bcz you have to learn basic designing on computer.

[@SURISETTIDEEPIKA]

Bro pls let me know wt type of glue u r using for better stick

[@khaistneonarts]

I used too many glues. But the one i am using in this video is the best one. Glue name is Quickfix

[@flutterspicz1733]

Hello, How do you isolate those wires? You just attach them without isolation?

[@khaistneonarts]

Brother i use glue gun to cover all the soldered points. Sorry for not showing that part

[@bsa5650]

what brand of glue are you using? i have super glue but it is so rubbish. What is the minimum plastic thickness you would use? great vid thanks

[@ThinkPozitv]

I used quickfix super glue. I tried so many glues and all off them were rubbish. This glue don't leave any mark and reaction time is very less

[@witzerofficiel]

Quelle est la meilleure épaisseur d'un prexiglass pour faire du neon Light ?

[@khaistneonarts]

It depends on size of sign. For small size you can use 3mm plexiglass. But for bigger size you have to use thicker plexiglass to avoide breakage and bending. For this sign I have used 6mm glass.

[@shaezellejackson8839]

What type of laser do I need for the acrylic ? Thanks

[@khaistneonarts]

Search Co2 laser machines on internet. I cut this sheet on my friend machine

[@lovaganesh]

I have a doubt bro.. For a name required 8 meters. Can i connect two 5mts strips for one or multiple input....? Now what i do reply please

[@lovaganesh]

Reply please

[@GlitchwayW]

Is it an 5Volt or 12Volt neon strip you used? or was it an 5Volt strip you powered with 12Volt? Is that possible? Can someone explain?

[@khaistneonarts]

This is Dc 12v neon strip, you can not use 5v power supply for this. It is possible but the light will be very dim

[@reynanjancentestrella2590]

Hi, what type of led strip lights you use? I ordered a strip light i'm not aware it should be cut per meter. I need a led like that, can be cut any size. Thanks

[@khaistneonarts]

When ordering from online site just check the description of product. Buy 1cm or 2cm cutting point neon strip 1cm cut neon is expensive and 2cm cutting point strip is less expensive.

[@Praisworking]

Thanks a lot for this video. Where can I get these neon strips from?

[@shannonmarie6227]

What is the brand of super glue u use that does not create a haze on the clear acrylic once dried? Thank you!

[@khaistneonarts]

This is Quickfix super glue which does not create haze on acrylic sheet

[@MoonRavenTV]

Dang, so many projects already ... and now I got some more ... YAY ... ^^ But first I need to find those materials ^^

[@khaistneonarts]

At the start of video i listed all the items. All the items are available on amazon. You can easily order them online

[@nossapieterse3687]

How did you cut the plastic ?

[@khaistneonarts]

I cut it with laser machine.

[@sacredlife4973]

how can you tell positive and negative connections?

[@khaistneonarts]

Positive wire have thin white line, it's not visible in camera but with naked eye you can see it while negative wire don't have any line.

[@martins7966]

What CNC cutter machine you use to cut the acrilyc board?

[@khaistneonarts]

I cut this sheet by laser machine brother

[@martins7966]

@@khaistneonarts sure its laser machine Whats the brand and model?

[@ThinkPozitv]

Brother i dont know the exact name of laser machine bcz i cut this with my friend's machine.

[@jpwonders1742]

One question what gauge is that wire? Also is it insulated or bare wire

[@khaistneonarts]

This is 1.5mm thickness wire. I buy in local market. You can find it in electrical shops easily

[@arsalanaltaf3346]

Thanks for the complete tutorial.. 😍

[@khaistneonarts]

Always Welcome

[@Hurairah_13579]

Excellent Video...Great Work....really inspiring

[@khaistneonarts]

Thank you so much Brother. Means a lot ❤️

[@vanburk1993]

Where you get the acrylic neon sheet ?

[@khaistneonarts]

I buy from local market. You can search acrylic sheet in your nearby area with google.

[@ibrarmughal10]

Can you please tell me how much is the thickness of acrylic sheet ?

[@khaistneonarts]

Acrylic thickness is 5mm brother

[@armandomote5687]

Excelente!! Eres un Maestro. Gracias por compartir tus conocimientos!!

[@khaistneonarts]

Thank you so much dear.

[@GianniGianni-g4x]

Hey super cool video! That glue looks insane I wound love to get some for 3d print it seem like the drying time is so quick! If you don’t mind me asking what brand of glue is that ? I saw your reply to the one comment saying “better glue” but I can’t seem to find a brand like that!

[@khaistneonarts]

Thanks for appreciation. Yes this glue is good. I buy this from pakistan. Glue name is "Quickfix Super Glue"

[@powerbcm]

how do you make the design for the acrylic?

[@khaistneonarts]

I make designs with Adobe illustrator

[@long.longg97]

Can i ask you what kind of drill you use, can you give me link of it

[@khaistneonarts]

This is mini drill. You can buy on Amazon or other local Apps.

[@kimsesizz]

What font and font size do you use? Thanks.

[@khaistneonarts]

Font name is "HOHO CHRISTMAS" Size of this sign 36 Inches.

[@KASHMIRAADORA]

Is it okay to use this as an outdoor sign?

[@khaistneonarts]

Yes you can use it in outdoor but you have to make it waterproof. In coming videos I will show how to make a Neon Sign water proof

[@AbbasKhan-l6r1f]

Awesome ❤❤❤

[@khaistneonarts]

Thank you so much ❤️❤️❤️

[@manasgarg14]

What font is this and what is the least size to design with neon led?

[@khaistneonarts]

This is Hoho Christmas font. I made this sign on 36x10 inches board.

[@HedikaStudio]

what is wire you are using?

[@khaistneonarts]

This is transparent wire used in signboard work. You can ask from any signage shop in your local area, they can help you provide this wire. You will find it in a shop where they sale signage materials

[@dadafernandez1371]

Im happy cuz ur videos very2x helpfull to others also like me.. More blessing & power..

[@khaistneonarts]

Thank you so much for your appreciation. ♥️❤️

[@angelcastaneda5285]

Nice video man I have a question, what kind of wire you used on the neon strips? The one that goes to the back of the acrylic, like the extension I dont know if im being clear myself

[@khaistneonarts]

This is clear wire with 2mm thickness. One wire is marked with white line which is used for +ve connection and the other wire has no mark on it which I usually use for - ve connection. You have to connect +ve connection of neon strip with +ve wire and -ve connection with negative wire.

[@khaistneonarts]

Still if u got problem you can ask ❤️

[@khaistneonarts]

This is same wire as I used on the back side.

[@sadriski]

Do you have a link for the leds & colored tubing please? 😊

[@khaistneonarts]

You can easily buy it on amazon. I buy it in local matket. Just search Neon LED Strip

whats teh thickness of the plexiglass?

[@khaistneonarts]

5mm

[@shivanisartcraftgallery4483]

Wonderful 😍 i want to try this 😍😍😍

[@khaistneonarts]

Thank you so much. Yes it's fun to do neon art

[@giacomele]

What kind fo glue do you use?

[@khaistneonarts]

Dear this is called super glue. Brand name "Quickfix Super glue"

[@ranamunj266-c8i]

Well-done keep it up You are doing great job 👍👍

[@khaistneonarts]

Thank you so much for your appreciation ❤️

[@zazazelazazel2786]

How do you cut the acrylic

[@khaistneonarts]

Brother i cut acrylic sheets with laser machine in market. You have to make design and then laser machine cut it according to your design

[@scalarenovanta8053]

Can you cut the strip everiwere ?

[@khaistneonarts]

No dear I can cut it after 1 inch (2.5cm)

[@abelsgarage]

There’s usually a little black dot on the back

[@ThinkPozitv]

​@@abelsgarageyes i have same dots on neon strips but it is less visible.

[@jaws21015]

Can you tell me what type of wire and gauge that you are using

[@khaistneonarts]

This is transparent wire with 2mm guage, i buy from china

[@ideadesignstudio304]

can you link me to the materials you used and where to buy? including what neon rope to get?

[@khaistneonarts]

Brother i buy all materials in local market bcz most of the times I received very low quality whenever I buy online. Most of the time i avoid online shoping

[@bryansullivan1769]

Have you made an Amazon Store? I'd love to purchase the same LED strips that you do. Thank you!

[@khaistneonarts]

Brother i will open my Amazon store soon. Will share link in upcoming video 😊

[@martyn334]

how do you make your acrylic? Where do you get all your supplies? really interested in doing this -.-

[@khaistneonarts]

Dear brother i buy all these materials in local market in dubai. If you want i can arrange from here.

[@khaistneonarts]

Brother I just design it in computer and then cut it with laser machine.

[@piotrmielnik1766]

Great work. What kind of neon strip did you use, where did get it from. Thanks

[@khaistneonarts]

I live in dubai and neon is easily available here. You can buy it on amazon too. Just search "Neon Led strip"

[@sadriski]

But there are so many different kinds of strips & companies...do you have an Amazon link please?? Thank you 😊

[@isakmeyer535]

Hi what glue are you using please

[@khaistneonarts]

Brother this is super glue, easily avaibale in markets or hardware shops

[@uswarana20]

How can I install simple neon lights on a mirror

[@khaistneonarts]

You must use mirror like acrylic sheet. It is same like mirror but you can put holes in that sheet. Or glass mirror you can not make holes