Рет қаралды 323
Making a paper phone stand is a simple and practical DIY project. Here's a step-by-step guide to creating one:
Materials Needed:
A sheet of sturdy paper or cardstock (preferably A4 or letter size)
Scissors
Ruler
Pencil
Adhesive tape or glue (optional)
Step 1: Measure and Cut the Paper
Take your sheet of paper or cardstock and place it on a flat surface.
Using a ruler and a pencil, measure and mark the dimensions for your phone stand. A typical size for a phone stand is around 3-4 inches in width and 6-7 inches in length. Adjust the measurements based on your preference and the size of your phone.
Once you've marked the dimensions, use scissors to carefully cut out the rectangular piece of paper.
Step 2: Folding the Paper
With the rectangular piece of paper in front of you, orient it horizontally (landscape position).
Locate the midpoint of the paper along its longer edge and mark it lightly with a pencil.
Fold the paper vertically along the midpoint mark, creating a crease. This fold will serve as the base of your phone stand.
Open up the paper, and then fold the two top corners diagonally downwards towards the center crease. The corners should meet at the midpoint. These folds will form the angled support for your phone.
Fold the bottom edge of the paper upwards along the center crease, creating a triangular support for the base.
Step 3: Final Assembly
Once you've made all the necessary folds, adjust them to ensure that your phone stand can support your device securely.
If you find any areas that need reinforcement, you can use adhesive tape or glue to secure the folds in place.
Test your phone stand by placing your phone onto it. Make any necessary adjustments to ensure that your phone sits comfortably and securely on the stand.
And there you have it! Your DIY paper phone stand is ready to use. It's a simple yet effective way to prop up your phone for hands-free use while watching videos, video calling, or simply keeping your phone upright on your desk.