How to make a propeller clock

~~~DIY LED propeller clock~~~
~ propeller clock project for pic
old
drive.google.c...
remake
drive.google.c...
NEW
drive.google.c...
Music:
KZbin Audio Library

[@indiangamer5191]

I don't, know guys where u taken like this Materials but I really like this video

[@temmyrichard831]

Hello Dinh! how can i get to build this particular propeller clock, i fall in love with this particular design

[@loekaars]

Just a quick tip: your video is 4:3 letterboxed to 16:9, just export in 16:9 so desktop users don't have to deal with huge black borders

[@akshathrangalbum1685]

I have liked and subscribed your video. Please show me how did you do that.

[@martinarielmartinariel1120]

What happens with the sensor in the minute 1:04 you can not appreciate very well how you are placing

[@matias.olivares]

@DINH NAM Hello I liked your idea of ​​the propeller clock but I do not understand how to do it, I saw the documents that you left on the drive but I do not know how to do it I would appreciate it if you could explain to me since I would love to do this project

[@technicalassamguruji]

nice

[@JdMagtibay721]

Can you please send me a pic of the back of the pcb.

[@LuisAlberto-gq9ej]

Excuse me, what's the component called U2 in the layout? can u send me the code? I'll thank u very much.

[@dinhnam502]

u2 is a real time clock ic. This is my project code drive.google.com/open?id=0Bx-e-c2y8_-eX1hWZ21nRGZGY28

[@joelpincay682]

hey can you help me? can you say the materials use it? i need the materials, please help me

[@Ziamrd]

Components for this circuit : 1x pic16f887, ds1307, 16x 330ohm resistors, 16xleds, A341 hall sensor, magnet, 4x10k resistors, cr2032 coin cell for clock & cell socket, 4x 104 pf or 0.1uf ceramic, 32.768khz xtal for clock, 16mhz xtal for pic, 2x2pf caps, 7805 regulator and 12v dc motor . and a lot of skill.

[@Ziamrd]

one thing more , you can not set the time of this ciruit

[@abdulkhaliqghouri3209]

i want what price

[@rohithachar5872]

it is awesome but you must show how build the circuit on PCB and the circuit diagram

[@g0od_xd82]

hola, disculpen alguno sabe a cuantas rpm debe ir el motor como minimo y cuales son las rpm recomendadas?

[@ludwig8891]

eine gute sache

[@SHZChannel]

bro where to get the components please helpme

[@Sam-ls5sf]

can u make detail tutorial

[@toancong2327]

Can you do it more clearly I readly want to do it.

[@andreocanha3940]

Could you please share the gerber files of the board?

[@prachigoutam6057]

please provide me full components list with detials and aurdino coding

[@nikitakumari1625]

can u provide me the link of coding??

[@nileshpadhiyar81]

CAN I GET THE CODE?

[@dinhnam502]

Sorry, the PIC code of this video has been lost, i have a similar code for msp430, you can use it drive.google.com/drive/folders/0Bx-e-c2y8_-eMmR6Uk9ZckMtZ1U

[@nileshpadhiyar81]

thanks

[@Azlantronics]

Music name plz

[@heatshop6231]

Giúp mình vụ này với, mìn muốn làm 1 cái :(

[@massimilianoburo]

OH MY GOD!

[@danuariwicaksono9409]

DIY led propeller clock shine led lamp and sistem off with timing 3 cm (0)0:00 (0)=3cm =number, alphabet simple working sistem flasher scala fluks circle next 1 second on,2 second off. on 1 second next 1 second off 1 second on. on 1 second 2 second off.(flasher.)

[@davidkraus284]

Dude can you send somewhere screen of program or whole file of program what you used i wanna construct these clock but i am not good in programming :)

[@dinhnam502]

This is a propeller clock project using the msp430 processor drive.google.com/drive/u/0/folders/0Bx-e-c2y8_-eMmR6Uk9ZckMtZ1U

[@davidkraus284]

Ty dude you helped me so mutch ^^

[@luanz.9167]

The idea is very cool, but we didn't understand the conections.

[@dinhnam502]

you can use by connecting the pickit 2

[@luanz.9167]

Sorry, I didn't see the descrition.

[@vamshisaikrishnaarelli9778]

This completely blew my mind 😍😍

[@michaelangelogarcia8442]

make it slower! :( i want to do it

[@michaelangelogarcia8442]

it is cool

[@dinhnam502]

thank you ^^

[@davidkraus284]

I have other questin for these LED diodes must be in same position and have similar degree like on your video? Second thing is they are "conected" or white just for inscription and green for background?

[@zakishaikh7866]

Hii Can you tell me the procedure of how to make this propeller clock step by step. Or send the video of its construction as i want to make it for my science exhibition. Please help.

[@cryofx7538]

Stark tech?

[@booboopancho4220]

hi...can u teach me how to do it step by step?

[@kiranchinche8511]

not understand clearly. can u guide slow n step by steps ?

[@dinhnam502]

my code and circuit the propeller clock drive.google.com/drive/folders/0Bx-e-c2y8_-eMmR6Uk9ZckMtZ1U kzbin.info/www/bejne/e2GpiquYqdJ8idk

[@abigailnicolebalisi125]

can you explain how you used the code please?

[@dinhnam502]

If you do not know the basics of PIC programming then you should use the available hex file to load the controller chip . I found a video tutorial here kzbin.info/www/bejne/e17PqpaooL-Ef6s

[@abigailnicolebalisi125]

Thank you!

[@JdMagtibay721]

Tutorial pls

[@angelodedicatoria1029]

Can I have the programm using pickit 2 for school purposes please

[@dinhnam502]

You can use these two projects. Get it here drive.google.com/drive/folders/0Bx-e-c2y8_-eY29vRzFnTXZQZTA drive.google.com/drive/folders/1GwDHBxIEnHTCalUHrn6NuutYHaEDdFq9

[@angelodedicatoria1029]

Brother what kind of programer did you used micro C??

[@angelodedicatoria1029]

Do you have a code for mplab for these cause my school didn't accept a micro C.. Program..

[@angelodedicatoria1029]

Please

[@dinhnam502]

What kind of software does your school allow?

[@onderleader7714]

How should I make a circuit to operate for a long time in the form of 12 cat sliding lights with a 9 volt battery? What type of LED should it be? 15 days - 20 days to run (10 hours per day)

[@parthgohil4490]

Hey can you help me in making a same one?

[@dinhnam502]

Parth Gohil may i help you

[@rohithachar5872]

can you upload this video by using Arduino nano and how to programme that exactly has you did the welcome and clock thing I had problems with that programming

[@Ziamrd]

I have made the circuit and working fine

[@tatotiteta]

can you tell me in detail about the circuit?

[@Ziamrd]

@@tatotiteta just download pcb and firmware from the link below, part are used in this circuit is pic16f887, 16mhz crystal, 32.768khz crystal, 330ohm resistors, 10k resistors,4.7k resistor ds1307 rtc ic,dc12volt motor, cr2032 battery cell for time keeping, and hall effect sensor with any kind of magnet, 1n4007 diod or any kind of diode and lot of skill and 16 any kind of leds. if you ar new in electronics do not make this circuit.

[@tatotiteta]

@@Ziamrd yeah i just found it out a few minutes ago lol, thank you. Im not really familiar with making these. Just wanted to start with something hard. might gave up in the middle

[@Ziamrd]

@@tatotiteta i will upload my video soon to show you my version of this circuit.

[@Ziamrd]

@@tatotiteta kzbin.info/www/bejne/f6aZqKqApt56rNU

[@abhinavsingh8792]

Can You share the Gerber file of PCB of the old propeller clock? Did you use ISP programmer for loading the program on PIC?

[@dinhnam502]

My old project was deleted when I format the hard drive, I will recreate it and give it to you as soon as possible.

[@abhinavsingh8792]

DINH NAM Did you use ISP programmer for loading program in PIC microcontroller?

[@dinhnam502]

I use a pickit 2 loader module along with the PICkit 2 program

[@abhinavsingh8792]

DINH NAM I mean you used a pair of thin wires which connect your laptop and PCB to load program...what's name of that?

[@dinhnam502]

it name the Pickit2 programmer ae01.alicdn.com/kf/HTB19ciOQFXXXXbxXFXXq6xXFXXXg/PICKIT2-PIC-Kit2-Simulator-PICKit-2-Programmer-Emluator-Red-Color-w-USB-cable-Dupond-Wire.jpg_640x640.jpg

[@cuongha2903]

Can you show me the code, please? file.v or anything else. Thank you.

[@monxo83able]

Muy bueno experimento

[@temmyrichard831]

please how can i get this kits for this project from Nigeria, Africa?

[@karengama268]

Awesome video! Can you share the code? I will really appreciate it

[@grvkr1947]

Sir can you provide whole tutorial

[@josejose-ok8tu]

great. thank. how delete the oring led for only characters please. than.

[@tankdestroyerno.2684]

Okay srsly this video needs more views

[@heatshop6231]

Chú người VN hỉ?

[@kwxj61b]

There's no "How" in this video. It's just show n tell.

[@dinhnam502]

You must download the pcb in folders and creating printed circuit boards

[@chetankadam2956]

Send me code

[@sahabattaka4625]

OMG that cool 😍

[@mercureff4535]

you are a genius

[@Abhishekn2606]

awesome 🤩😍😍

[@muammarzain9466]

How to get +5v to board sir ? Idk to get supply

[@dinhnam502]

You use the LM7805 voltage regulator

[@ma.luisadestreza2392]

Why don't you introduce your creation to the public?

[@epx123]

its in the description

[@Atechtechnology]

What's the diode value ??

[@dinhnam502]

any diode is OK , i use Diode 1N4007

[@Atechtechnology]

Ok thanks ☺️

[@Atechtechnology]

Please tell me how can I solder 470uf pins ?

[@Atechtechnology]

because 470uf capacitor pins soldering is not mentioned in diagram

[@Atechtechnology]

Please send me picture your soldering capacitor on this email : [e-mail]

[@joesanchez9848]

the PIC is the 16F887 without A?

[@dinhnam502]

the only difference was flash memory

[@joesanchez9848]

TY for the info! , im newbie on this...