How to Make a Scraper Plane and all the Hardware - Scrapwood Challenge ep50

My Premier Project Plans: paskmakes.com/...
My Free Plans: paskmakes.com/...
I made the video a scrapwood challenge even though there was some metalworking involved, hopefully you enjoyed it anyway, even if you're not into that sort of thing.
Join My Kumiko Challenge: rlnk.cc/paskma...
As always I'm happy to answer any questions.
If you would like to support this channel you can do so here
/ paskmakes
You can also help me out by purchasing one of my shirts, you can find them here paskmakes.thre...
Check out my new website
paskmakes.com/
Check out my Instagram to see more of my work / paskmakes
Also you can check out my photography at my website (nothing to do with making but you may be interested in what I do) www.neilpaskinp...
My email can be found in the about section of this channel.
For real mail,
Pask Makes
P.O BOX 768
Yandina
Queensland
4561
Australia

[@PaskMakes]

I made the video a scrapwood challenge even though there was some metalworking involved, hopefully you enjoyed it anyway, even if you're not into that sort of thing. Join My Kumiko Challenge: rlnk.cc/paskmakeskumikochallenge The template can be downloaded from here www.paskmakes.com/plans

[@jamesparsons9437]

Don't worry Neil, I'd happily watch you make anything! Maybe it's time to start the cooking show?😂

[@shawnsmith9844]

Amazing skills sir, God bless you

[@SouthpawDavey]

A thing of beauty.Loved when you said for a home made tool it will do.. Anything mass produced wouldn't be half as good as that. Having never come across camphor laurel what does it smell like? Cheers.

[@nicko198718]

Hey mate bit of an odd question but do you have any trouble with that red trojan guide for sharpening. I know it's a cheap bunnings special but I can't seem to get a super accurate angle when tightening it for chisels? Seems to want to shift to one side after tightening it it down did you make any modifications to it to work better or just use it for plane blades? Thanks Nick.

[@TheDrumminjay]

Simply put-its a masterpiece. Really beautiful finish on the camphor laurel. I don't even think a smoothing plane could get you as satin a finish as that. Love your creativity! A real pleasure to watch how your mind works, and how you apply it to projects!

[@garyloko7351]

The author does like to from scratch, kzbin.infoUgkxbnOKZBE4evMO5V2vroHeCjq6d_MV6wJO shaping and trimming wood from large blocks into fine finished products. As another reviewer mentioned, most projects require a lot of high-dollar equipment that most of us don’t have the room or budget for. But, knowing how to do these things, even if we won’t be able to practise the full stack project, is still great.

[@Norm7264]

This plane build is a tour de force, Neill. Just brilliant. Culminating in that beautifully-scraped piece of camphor laurel.

[@PaskMakes]

Thanks very much Les - glad you enjoyed it! :)

[@firefrost8334]

Truly a piece of art, such a pleasure to watch! And really nice to get a bit of a longer video, the longer the better in my humble opinion! It’s so inspiring to see a master craftsman at work so thank you ever so much! We know how much effort goes into videos like this and we really appreciate it :)

[@PaskMakes]

Thanks Sol - glad you enjoyed it! :)

[@theajthomas]

That groove in the dowel is genius.

[@kurnal1983]

I have done some woodworks in the past but this woodwork plan kzbin.infoUgkxZF0EMnrujZvqHhGkxiz559uIABJWR9TG helps me do much in a far lesser time than i used to do i have already built several projects with this plan and i intend to do many more soon. Thank you so much!

[@Violaetor]

Oh man, that slide whistle killed me, beautiful as always Neil!

[@AndiNewtonian]

That turned out absolutely gorgeous! And never apologize for the video being long. I love watching you work. Reminds me of doing woodworking with my late father when I was a kid.

[@n.gravey3735]

Love the longer videos. Its very therapeutic to just sit and watch a master at work.

[@Nono-hk3is]

On the subject of kumiko, I just wanted to shout out the Adrian Preda channel. They do kumiko completely with hand tools, with shooting planes to square up the wood, and homemade router planes and chamfer planes and the whole works. Pask fans would greatly appreciate it.

[@professor62]

Absolutely amazing, Neil! You are both a craftsman and artist par excellence. And please don’t ever feel the need to apologize for the length of your videos. I could watch them all day.

[@Vickie-Bligh]

What a beautiful piece of art. It has all the aesthetics of wood sculpture, can be proudly displayed in a home, and yet remains a valuable part of your wood shop. You are a master crafter, Neil. This was well worth the wait. Thank you for sharing.

[@PaskMakes]

Thanks very much Vickie! :)

[@decomputerleraarable]

Don't worry about the length of the video. It is a pleasure to watch the whole length. And the result is stunning! Rob

[@rxcrcfllptrs]

Been watching a lot of my mechanics, Pask? Creating your own nuts and bolts seems like a fun way to go about it.

[@The_Modeling_Underdog]

38 minutes of pure Pask genius. That plane looks and works beautifully.

[@onlineda1]

This is a work of industrial art Neil. Absolutely beautiful tool and works great.

[@FlashPaperGrind]

Passion and expert craftmanship came together so well in this project and the result is beautiful!!

[@themonkay5]

Just watched this and thought it was just wonderful! I love hand tools and the design of this planer is brilliant! Thank you for keeping “acoustic” tools alive and honored!

[@PaskMakes]

Glad you enjoyed it Kay! :)

[@RichardMerrill3Hawk]

I love how carefully you shaped everything, the bevels matching, etc. My favorite part was you deciding that beautiful knob didn't match the plane, and you made one that perfectly matches the aesthetic, and ties the whole look together. Masterful, and wow, I could see the smoothness of the camphor laurel. We don't have it here, but it sounds a little like elm, which is impossible to split. Fun stuff!

[@BeauSeverson]

I'm absolutely addicted to these videos. I love the process and hearing not only all the commentary on the project, but also all the little things that go wrong and how you go about fixing or dealing with them. Sometimes things on channels like these feel like they need to be so perfect and pristine every time, but even though you're using a shop full of expensive things, you've still made something that feels incredibly attainable. Seeing how nice this looked at first I thought "Maybe someday when I have nicer stuff to work with", but by the end of the video I'm thinking if I can find a few chunks of hardwood I could try and make this. Keep up the great videos!

[@Gogofam123]

Now that’s a PROPER JOB WELL DONE 👏🏻

[@andrewgalbreath2101]

It's beautiful! The chamfer was a nice touch! And "No accuracy here, but they'll have character" is my new shop motto lol

[@VeloLEV]

I learn so much watching your videos. Using the drill press to drill the curves in the handle before band sawing it and carving the channel in the dowel before insertion are two things I've added to my woodworking quiver. Thank you!

[@GetHandsDirty]

Such an amazing project and the final piece is so perfect!

[@daviddolle1410]

je vois que la comunauté se rejoint sur youtube.

[@BOTS9391]

Great job! I didn't know there was such a thing as a scraper plane. Lol. Cool!

[@PaskMakes]

Thanks very much Chase - glad you enjoyed it and that you learned something new! :)

[@TigerCarpenter]

that is just superb! what I learned from you is making the parts that I need rather than sourcing them online, then ordering and waiting for weeks or months, just to realise they are not exactly as I was expecting them to be. I adopted that parts making habit and now I just source the raw material such as stainless steel tubes, rods, bars, and so on.

[@xjamablamax]

Honestly I had no idea how long the video was until I looked after it finished. I was fully involved the whole time. Great work on the plane and video!

[@dalemartin7886]

Your projects and videos are top class. You've got a great mind for engineering and design. It's a pleasure to watch and see what you build. Thanks from Napa, California.

[@dyingsanity3252]

You, sir never cease to amuse and amaze your fans. With that in mind: what is a project you don't think you can do? Either do to time, funds, man hours etc... aka; your "holy grail/dream project."

[@Mikha1y4]

Scraper plane -- a FANTASTIC idea! Never heard about it before. Wonderful! Thank you!

[@stephrandobrico82]

Hello (from France near Toulouse). I am in awe of the work you do, it seems so simple to do when you show it to us. A big BRAVO to you. Sincerely. Etienne ------ Bonjour (de France du côté de Toulouse). Je suis admiratif devant le travail que vous réaliser cela semble si simple à réaliser quand vous nous le montrez. Un grand BRAVO à vous. Cordialement. Etienne

[@stephrandobrico82]

Good evening. You are an ARTIST Bonsoir. Vous êtes un ARTISTE

[@billwilliamson4715]

Woof - fancy. Beautiful and functional. Heirloom piece. I love the dedication to getting all the details right.

[@levinav2297]

Aside from the valuable wood working techniques, it's quite relaxing to watch your videos.

[@NavyNube]

I wouldnt be able to use this thing if handed to me. It is a piece of art in itself man. Beautiful work.

[@donlunn792]

No way was the vid too long.That’s why we are here, to see a detailed vid. Lovely tool. Lovely vid.

[@joeroscillo4015]

I'll never make this or need this tool, but I couldn't stop watching you create it!! Spectacular job!! Your such a craftsmen and I can see from your shop, it's not your first homebuilt tool!!

[@michaelmistry2862]

Only a professional can achieve this considering the accurate measurements and angles along with the beauty...this is a piece art...loved it..

[@calvinnash5527]

Speachless as to how good that that looks and all the hard work put into it... thank you.

[@RobFulcher]

Ha!! I KNEW you were going to remake that knob ;) Agreed, though - the profile of the new one suits the plane much better. Brilliant work, as ever. Thank you so much.

[@PaskMakes]

Thanks Rob! The first one was fine, I just didn't think it suited the plane. :)

[@LostWhits]

@@PaskMakes you'll just have to save it for your next plane.

[@owenparker6651]

As always, a mesmerizing display of design and fab skills to go with my lunch. Someday, a hundred years from now, someone will pick that up at a yard sale and wonder about how it came to be! Make sure you brand it! Thanks for sharing...

[@tommot7755]

The creativity of this guy is amazing, but holy moly what an amount of glue!

[@lynxg4641]

Neil, off the charts. To long, not in the least, sat and enjoyed the full 30 minutes and you could have made it longer and I still would have sat and watched it all. Never heard of a scraper plane before, saw the teaser image in IG and was wondering what the heck it was, but now seeing it and knowing how much I like to try and do my finish with a plane for cut instead of broken fibers, I think of all the planes, I might actually try making this one.

[@victorpapaavp]

"I am putting the slightest burr on the edge..." Proceeds to cut magnificent curliques from a piece of wood. Awesome work Pask, loved it!

[@sobertillnoon]

When I was a kid I used to watch the new Yankee workshop. Every day hoping this time I'd get to see the lathe. The thought that this week maybe I'd get to see the lathe what life to me. Not much has changed in 25 years but the name of the show.

[@yvettewallus119]

I really wish my grandpa was still alive. I do think he’d enjoy watching the beautiful work you do.

[@rdfjfgjyfdhfghy67456]

The theme song just get me so jazzed! Love your work ❤️

[@discerningx3375]

Jack of all trades and master of them too. My respect to you Neill.

[@neilf4128]

You are so creative, frugal and resourceful. I know your probably not at all interested, but I just believe if you made a book, it would really sell.

[@arnoud235]

I've been watching your videos for the last 3 years, and I must say I really love your work, keep it up!

[@PaskMakes]

Thanks very much! :)

[@wolfman2878]

I have never seen this style of plane Neil, thank you for teaching me something and sharing your attention to detail, outstanding sir.

[@petermarsh4993]

Dear Neil, it’s rare to see someone who confidently moves between woodworking and metal machining, well done. I see you also have a 110kg anvil. Does that mean we will start to see some blacksmithing creep onto your work? That would complete the trifecta and would be like heaven on earth for me. Congratulations.

[@PartTimeMakers]

That is just a beautiful tool you made. It is a work of art in itself.

[@JohnMcGrathManInShed]

You should be really proud of that plane its brilliant! Lovely work.

[@samanthadean1083]

Yes!!! Number 50!!! Great job!!!

[@ronkouwenhoven]

Neill, thank you so much for motivating people like me to get into woodworking!

[@PaskMakes]

No worries Ron - it's great to hear that the videos are helpful! :)

[@ColbyClinePenholders]

Casually adds a dolly zoom. Awesome work!

[@PapaDan]

Another well appreciated project Neil. Cheers mate!

[@rjtumble]

I've been looking forward to this as you've been posting updates, great job!

[@IanSmithKSP]

You should give making a knife-plane a shot. Chisel plane is another name for it. Originally the designs were for piano makers, but I think you'll find it an extremely handy tool. I've owned one for about 3 years now and so far it's been "the only tool for the job" in about 5 different ways.

[@wolfparty4234]

Just fantastic!!! Nope, it wasn’t too long at all. I don’t enjoy watching your videos and sometimes feel cheated when they are too short. This one was just right and love the content!!!💪🏼🔥🔥👍🏻❤️

[@norm_olsen]

Your talents never cease to amaze me! Just incredible!

[@mandyleeson1]

Watching a master craftsman at work here. Neil, I always learn so much from your videos. Thank you 🙏🏼

[@bsimpson6204]

Beautiful! all I'll sugest is a s/steel washer each side of the knurled adjusting nuts.

[@robmatthewswoodturning4988]

Ooohhh, that dolly-zoom at the end! Gorgeous stuff, Neil.

[@laughkick]

I struggle with tear out with so many woods. This looks like a great solution. Such a nice surface on that laurel at the end!

[@applemac755]

A

[@applemac755]

W o

[@lloydgarland4667]

Excellent video mate, great photography!

[@michaelbaykara2322]

Paskie your an A to Z craftsman, great work.

[@Zogg1281]

That is a really beutiful Scraper Plain and the finish it left on that piece of Camphor Laurel was amazing and soooooo much quicker then sanding LOL When you put the posts on KZbin the other day I really wanted the video straight away but this video was definitely worth waiting for. Thank you again for all the work you put into these amazing projects 👏👏👏👏👍👍👍👍

[@runningmangray]

That sir is absolutely beautiful. I find your videos are brilliant & inspirational.

[@keggyification]

Stunning Neil, simply stunning sir.

[@cashel1111]

absolutely wonderful! im glad you are back to posting tool making videos im glad for more and more metalworking and finally, im glad to see you making tools that directly help you with the material you have an abundance of! looking forward to more videos!

[@travisbuildsthis8673]

True craftsmanship! As always, enjoyed the video.

[@arimadx]

Man, almost every time I watch one of your videos I'm reminded that I could really use a good set of rasps! I've only been into woodworking for a couple years though so I'm still in the "spend ridiculous money on tools/machines" phase. 😂

[@claudeelliott3993]

Exquisite workmanship, design, ad infinitum!! Beautiful piece to hand down to your children, grand children - - -

[@tonyhirons5445]

Is there anything that this man can't do? Brilliant as usual. Keep them coming.

[@annemuller3526]

Hello! I am a beginner in woodworking and I really enjoy your videos! Something that would help me understand the process better while watching the video is a short explanation of how you want to build your project and explaining which task every piece of wood has. However, I cannot imagine how much time you put into these videos and I can completely understand that that might take too much time.

[@GenePavlovsky]

It all becomes clear when the project is done and showcased :) Perhaps watch the last couple of minutes first, then jump back to the beginning?

[@brianfalls5894]

Nice job on the scraper sir. It looks like a real professional job. Well done sir!

[@frankbombardier7656]

Pask this was absolutely amazing to watch and I must say that it is a beautiful work of art .

[@skmurch]

It turned out great and looks fantastic. You also incorporated several of the tools that you built previously into this build. Very well done.

[@tomas5376]

That’s one beautiful scraper plane!👍✌️😊🙏🏼⚒⚒⚒

[@keithgoldston2859]

Some people just buy pan head screws not pask he just makes them lol I love that he works with what he has and makes it work for him another great video keep up the great content

[@bikefarmtaiwan1800]

Superb! A man with your creative talent deserves to buy himself a metal lathe .

[@diggaboy5006]

Very nice !!!! Your attention to detail is excellent.

[@ghill1010]

Having watched you for a while I didn’t think you could get better. I apparently was wrong. Thanks for all the hard work and showing us what is possible.

[@BruceAUlrich]

What a fantastic build! Enjoyed seeing it all come together.

[@volkangunyeli]

Perfect, high quality, clean workmanship. Congratulations.🙂👏👍

[@JacobLongActingJourney]

I would definitely buy this. Well done!

[@MrJohnnyboyrebel]

You are truly an old world craftsman. Fantastic results!

[@antonyath2950]

I m speechless ! I saw it all at once !

[@derekludlow]

Amazing work! I guess I never realized how many parts and pieces are in a simple plane.

[@vasja_vasin]

A tool that has made itself a pleasure to work with. You have a very beautiful and practical tool. Thank you for the another video.

[@robfisher5284]

Great job on the plane! I love your videos, they are alway very good quality with an “every-man” feeling to them.

[@PaskMakes]

Thanks Rob - glad you're enjoying the videos. :)

[@homestar04]

The unexpected slide whistle was absolutely hilarious

[@stuartschnare152]

Worth every minute! Fantastic results.

[@paulmartinez9908]

I love your narrative voice..every last word sounds the same..you know what I’m talking about.

[@adg1017]

Stunning piece! Functional art. 👏👏👏

[@ukpatriot]

Man of many talents keep up the excellent work.

[@guitfidle]

Wow, what a nice plane! I really like how you reinforced the handle with the dowel- that is a simple but effective way to do it, I love it!! I might have to give this one a try 😀

[@mduvigneaud]

What an absolutely beautiful plane! Such an amazing craftsman. I'm so glad I found your channel recently.

[@PaskMakes]

Thanks Martel - glad you're enjoying the videos! :)

[@petermeijer3019]

Wow nice piece of work and you have great woodworking skills!! Thanks for sharing.