How To Make A Table Saw Fence For Homemade Table Saw

This time I will shop you, how to make a simple and accurate table saw fence for homemade table saw.
T track rail: shorturl.at/rvBFT
How I made a homemade table saw: • How To Make A Homemade...
How I made a crosscut sled for table saw: • How To Make A Crosscut...
You could support me and my content creation by buying Well Done Tips official outfit: teespring.com/welldonetips
Due to factors beyond the control of WellDoneTips, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. WellDoneTips assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. WellDoneTips recommends safe practices when working with the tools or equipment seen or implied in this video. Due to factors beyond the control of WellDoneTips, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not WellDoneTips.

[@antoniobavia6167]

one of the best and simple solution to realize a diy fence on the web, very good and useful job.

[@mcopado]

Thank you for a really simple design, with clear instructions.

[@AS-pg4mz]

Love your clean and easy tutorials!

[@cannskulls]

Just the thing I was looking for. Thanks for the tip!

[@ArcanePath360]

I was looking at buying a T track but getting one in the UK is difficult, they're so expensive, but your idea of just cutting your own from a square tube is brilliant.

[@fariseudoagreste]

fantastic, i've been searching for homemade tablesaws the last few days and your solution is the best I found. simple and efficient. congratulations.

[@jimnz17]

i must have watched 20 table saw fence vids. your is the simplest

[@leorincon3163]

Detr D .trabajo de carpintería sobre la fi, gii

[@kevinjackson4237]

Great job! So clear and concise. Thank you for sharing this

[@bernym4047]

An excellently produced video. Thanks.

[@claudiodefensor3837]

Thank you, congratulations !!

[@maryjocookson7156]

good idea , well demonstrated, hope to make this for my old tired table saw!

[@rayker6799]

simple pero epektibo....ang galing mo bro.

[@ArcticFlies56]

Great job and simple to build. Very nice.

[@mehranfreeman6192]

I made similar thing years ago when I was young, but yours is much better than I made.very well done

[@hazimzaid3071]

simplicity and elegant design well done

[@habibeghbali5050]

Hey these videos and pictures are great and useful thanks for everything

[@davewilliams355]

Great job.

[@balder326]

Magnífico el soporte, me has dado la idea para hacerme una igual. Like

[@animalier2949]

Excellent Demo!

[@saleemkader2126]

Very nicely done . Step by step. Thank-you I will try to make one I know it won't be as good as yours.

[@MarkMcCluney]

really nice job mate, enjoyed that.

[@nosratollahnikpeyma6335]

Mark McCluney i⑧itsok

[@diegohperez6434]

Very very good easy and it’s plenty room to use hard wood thank you very much

[@abhimanyusingh3234]

One of the best hand made fence and easiest too till now I have been observing on U tube, thanks and best regards!!

[@user-cm3ek6ug6u]

Thank you so much for your so nice show !

[@Mrpepealvarez]

Buenisimo video una gradisima lecion me a encantado gracias por estos videos tan buenos. Un saludo desde Asturias, España

[@Maghanashi]

Good idea, but there's the introduction of flex to the far end of the fence. It would need to have rails and fasteners at each end, both requiring individual adjustment.

[@rupertschott5437]

Excellent video! Well done!

[@MCsCreations]

Really well done! :)

[@vicentealbertopereyrasoto9609]

Opino que en el otro extremo debe llevar con soporte que ajuste a la mesa, pues la vibración o algún otro factor puede abrir la regla y causar un error de corte. Pues hay firmeza al inicio y no a la salida

[@jrm-6892]

buena observacion amigo suerte en tu negocio es muy lindo la carpinteria

[@miriamgarcia8195]

De acuerdo

[@joseantoniogalindocarmona7163]

Completamente de acuerdo. Algo asi como una varilla roscada que jale y ajuste el otro extremo. Saludos

[@frankpayne2126]

really easy to understand thank you a very good job

[@norlanenriquecastillomarti1781]

este señor lo considero mi maestro .y le doy muchas gracias

[@Yahoomediaclub]

Awesome...100% 👍👍👍🍻

[@jordanhenderson3741]

Without a clamping mech on the other side, would your fence not flex if you were to rip a long board?

[@ravingrabbids72]

guys cut a bigger hole out for saw then your safety guard will pop up on your table if using a plundge saw 😃💪👍

[@vedatbajramaga175]

Vrlo jednostavno ali odlicno prikazano Zasluzuje svaku pohvalu.

[@neliorodrigues2249]

Ficou um espetáculo muito bom mesmo brigadão VALEU

[@calogerosantangelo3723]

The most practical and simple saw fence

[@giancarlo4862]

ottima soluzione.. bravo

[@vostock08]

muy buena idea

[@georgehebdon2756]

Absolutely brilliant 😊😀😊👍👍👍👍👍, ace design in its simplicity, a few odd additions when I make mine, (in materials only), many thanks, liked,subscribed. I'm in the U.K.

[@sabahkattan985]

It is the best method, good on you

[@belamj5584]

very nice job

[@user-xm8my9id2x]

bonjour simple et efficace, bravo

[@ksrahmat7789]

Really nice work there

[@TrendMeubel]

good, thanks you

[@rubo1964]

track on opposite side will make it very stable since its placed longer side of the table and fence is pretty long and rather lightly constructed.

[@user-ci6ww1hd1v]

super !!!!

[@neliorodrigues2249]

Muito bacana ficou excelente seu projeto guia de Serra de bancada foi uma ótima apresentação e muito boa à demonstração valeu obrigadao

[@rexmontana3058]

Simple and smart...very nice

[@freshegg5383]

so gooood, thanks you

[@roltol7539]

am, but is it ok to have wobling other fence end ?

[@retrogamescl]

Excelent!

[@michaeldowman8610]

Thanks for the video, the fence that came with my saw broke, so intend making this fence.

[@Rocstoneau]

A clean and neat visual tutorial without all the preamble waffle I'm used to hearing on most other sites. Did i miss the handle being put on?

[@amichief1437]

No , That's the only thing left out, I never saw it either !

[@Darkmatania]

For me it's great. I am from Poland with us all too much complicated projects

[@enceanuoprea1948]

S

[@enceanuoprea1948]

Albine

[@user-gy6th8hb4d]

Сэр, может я ошибаюсь, но мне кажется, что вы мой соотечественник и я безумно рад за вашу смекалку, что вы ведёте канал на не родном для вас языке, оно и понятно почему! Надеюсь, что я не ошибаюсь, т.е. делаю выводы по знакомому мне акценту и произношению "р"!) Собственно хотел вам предложить приделать линейку сбоку и пусть это будет ещё одной идеей для нового отличного видео! =) Пока ещё не посмотрел всех видео, может быть идея уже была воплощена! Подписался! Искренне желаю успехов и развития!

[@jerichdatu9325]

SIMPLE, NICE, EASY, AND ACCURATE....MOST IMPORTANTLY COST IS CHEAP

[@Tukangkayu82]

Perfect tip

[@mailtongomes5814]

Perfect, Show 👏👏🇧🇷

[@fallenseraph5V]

Nice but you can buy the T-track and T-bolts. Can your table saw do angle cuts?

[@Br_Shop]

Great job,

[@jiyouthtalagang5023]

بہترین ورک

[@JiLiiGAN]

Спасибо✌

[@CreativeIdeasMaker]

Great as always, thanks for sharing

[@thuglviz]

Thx man this is what i was needed ;) Did You use a special saw blade for aluminium, or standard for wood for cutting the grove?

[@FransvandenBos]

Nice job

[@peterh2800]

excellent job

[@amichief1437]

Great Video, but one question please . When inserting T nuts, to holes, Why not do T nut recess first after drilling, rather than in the piece without the T nut, just makes sense to me ! Just asking. ???

[@heinzelbers7247]

If you're using T-nuts more or less often, it's worth to buy a counter-bore drill bit to drill the hole and recess for the t-nut in one go. Trend for example has them for 6 and 8 mm t-nuts. I love those drill bits... :)

[@princewarior2554]

Cool design.. Well done..👍🏽

[@JPJ496]

very good, thanks

[@delphinny]

where did you buy the aluminum tubing and what dimensions? also your bolts are 5/16?

[@mohamedalhabsi3948]

Thanks I will try to make my

[@zonasprint3712]

Nice tablesaw 👍 what's the name of bolt you're using for slide ?

[@sudhirpatil3434]

Nice! Appealing!!

[@chavink1]

I like you adaptation of t track and slot screws

[@ArchLinuxTux]

What were the pupose of the t bolts if the middle carriage bolt was the porviding the locking action? Great job.

[@42698]

Thanks you

[@hassanelnaggar1985]

*انت رائع يا عزيزي تحياتي من مصر*

[@tianathesnail439]

what are the dimensions of your table top and the rough placement of the saw on it? (I've seen the other videos)

[@henrycollings6818]

very interesting and a cheap way to make saw fance

[@user-cb5wv4xo9j]

Отлично! Просто и быстро! Удачи!

[@charliephuket]

Wow.It's​ very​ good.

[@mitrovdan]

Hi there, does your saw fence stay straight even at the end? It's a very long fence and i've seen guy's make shorter ones and complain that they moved left to right at the end ...you have the same problem?

[@AntonioLima-pf2so]

Muito bom

[@zabolotskiyyvladimir6646]

класс!!!Просто и функционально

[@tonyrattan8093]

Works great. I did add a rail at the top end of the table though.

[@fabricioandres]

Toma tu merecido Like! Gracias!! 😁

[@philrichmond7567]

Good video

[@bilgaissa5831]

The best i have seen thanks

[@arteportaporta461]

muito bom

[@jaimegenegordon9092]

Muito bom....

[@souhailrider1300]

Very nice ✌👍

[@miltonmainardi2605]

Hello Friend. good video and beautiful circular saw table. what is the name of the part you used to make the cutting guide. the one that is fixed to the side of the table.

[@vipinpatel4545]

Very simple, but effective

[@JUST-UK-JAY]

brilliant subbed

[@viplavanand5077]

Good job. Simple one

[@Tukangkayu82]

Very useful tips

[@enzofaidate2398]

Nice video!

[@phoenixcreations94]

Perfect work .. i can make the same system using aluminum .. it will be like a factory work

[@pilkyish]

Great video, great solution. Can’t believe you got so many thumbs down.

[@krishnamurthykeramalu2487]

💐Very nice work sir 💐👍🇮🇳