How to Make A Touch-Sensitive LED Smart Table? - Full DIY Process

Here is the complete DIY process of this epoxy resin touch-sensitive LED smart table.
1. Cut out hexagons on a CNC machine
Download the CNC file for free:
spetools.com/collections/spet...
2. Polish the edges of the hexagons to remove the burrs
3. Pour epoxy resin into the grooves
4. Flatten the top and bottom surfaces of the board
Router Sled: SpeTool Cratos
spetools.com/collections/rout...
Router Bit: SpeTool ATS coated surfacing router bit (W05002)
spetools.com/products/spetool...
5. Cut out circle grooves for placing LED modules
Router Bit: SpeTool down cut spiral router bit (W04004)
spetools.com/products/spetool...
6. Polish the surface of the table
7. Cut off excess wood on all sides of the board
8. Get the LED modules prepared
LED Modules: spetools.com/products/led-mod...
9. Place the LED modules into the circle grooves and connect them together
10. Fix them in place with hot glue
11. Join the LED table with the base together
12. Flush trim the 4 edges of the table
Router Bit: SpeTool Ranger flush trim router bit (W07037)
Speed: 10000 RPM
Ranger Series: spetools.com/collections/rang...
13. Chamfer the edge with a round-over router bit
Router Bit: SpeTool round-over router bit (W07028)
spetools.com/collections/spet...
14. Apply a clear coat on the surface of the tabletop
15. Fix the table legs
Done!
For any questions about this process, feel free to leave your comment below!
Updated:
Things to note when making this table: pC2h_OQ1NV...

[@murdianitasripan741]

Masya Allah dengan bahan dan teknik sederhana tetap bisa membahagiakan anak-anak 😊 Semoga ilmu dan hartanya barokah. Aamiin.

[@varunkumaran2624]

Hiii nice pcb... Can u tell me the name of the 8 pin ic for touch?

[@tony20187]

I like

[@kishanprajapati9298]

Hello is me konsa sensor hai

[@karstenkruger9129]

Wie dick ist die Tischplatte? Und wie tief wird eingefräst?

[@andrewmogg7315]

Thats funky, think I'd like to make that for grandchildren. Does the Led's only come in a single colour, or are colour changing modules available?

[@spetoolrouterbits8275]

Currently there is only one color

[@devincomiskey3482]

How are you powering the LEDs? That's left out of the video. I definitely want to try this!

[@spetoolrouterbits8275]

Use this: spetools.com/products/led-module-for-river-stream-desk-accessory-power-adaper?variant=42126596767927

[@pro100aksh]

Пологаю тут нельзя менять время загорания светодиода после прохождение рукой по поверхности?

[@romanomantel7548]

Is there a way to use batteries to supply the power so that there is no cord hanging out underneath the table?

[@spetoolrouterbits8275]

That may require a bit of modification on your own, and then you need a battery with enough power energy.😀

[@MngKulaZ]

where can i purchase that kind of led light,,??

[@spetoolrouterbits8275]

spetools.com/products/led-module-for-river-stream-desk-accessory-power-adaper?variant=42220571033783

[@marioocon8820]

Do I have to add an Arduino to make it work? Or just plugt to the power?

[@spetoolrouterbits8275]

just pluge to the power, it will work

[@HamouDjilali1984]

From your chapter, how much does an LED cost per piece and what is the name of the store you bought it from?

[@spetoolrouterbits8275]

spetools.com/products/led-module-for-river-stream-desk-accessory-power-adaper You can buy it from this link.

[@santiagolasala9443]

Hola soy de argentina, me gustaria realizar un trabajo como el del video como puedo conseguir los modulos led? Me podrias asesorar gracias.

[@spetoolrouterbits8275]

spetools.com/products/led-module-for-river-stream-desk-accessory-power-adaper

[@sponutoob]

How deep do you cut out the hexagons and the circles?

[@spetoolrouterbits8275]

At least 10mm, so as to fit the LED module

[@HamouDjilali1984]

​@@spetoolrouterbits8275From your chapter, how much does an LED cost per piece and what is the name of the store you bought it from?

[@MattMadeIt123]

How many LED modules can one power adapter supply power to?

[@spetoolrouterbits8275]

There's no limit, in our case, we used 159 LED modules.

[@mrunion]

They have a bundle offer that gets the modules for a discount id you select it on the module page -- that's cool!

[@meddz8806]

Where can I find these fashion pieces?

[@spetoolrouterbits8275]

spetools.com/products/led-module-for-river-stream-desk-accessory-power-adaper

[@insanegammer109]

Does each board have its own microcontroller that does capacitance sensing and fade in/out the LEDs?

[@spetoolrouterbits8275]

Yes

[@kevinrobinson9574]

What is the power consumption of each led module ? It's to see if I could power them with a battery

[@spetoolrouterbits8275]

0.4W/each

[@gauravsharma280]

kzbin.info/www/bejne/q32pZWBrYrOarq8si=DDbhMdKufBA8qtdW

[@user-eh2vu1pd3e]

Great project. Terrible music.