How to Make a Wooden Speargun - Part 4- Youtube demonetized this video. Why?

[@michaelchand341]

I've gone crazy watching our spear making videos. I have been making spear guns too and thanks to your videos i have learnt more techniques for perfecting my build. Thank u very much. Seriously Cant wait for part five. God bless.

[@MrMyvids4you]

michael chand Hello michael chand,part 5 is out! is good to know that you are making spearguns too! knowing that my videos are helping you with the construction of it, means alot to my! Thanks!

[@TheJmanzano211]

I love your videos so much they show so much detail compared to all the other channels on KZbin

[@MrMyvids4you]

Hello John manzano, I like to make videos with as much information as possible, the challenge is to make videos that are informative and at the same time not boring to wach! Reading comments like yours makes me believe that I may be doing something that most people like! Thanks for watching!

[@ScoutSniper3124]

Should repost this video as "How to make a custom round nose router bit". It's great information all on it's own. Thanks for the video.

[@MrMyvids4you]

Hello Ryan taylor, For now i need to finish these spearguns first! during the summer months I don´t have time to make more videos. Yes you are right, I start to realize that small projects like making router bits and other things that I include in my videos can make interesting videos that can help others achive their projects! Thanks for watching my videos!

[@MrMyvids4you]

***** Hello Nevermind, I like the hobbyist/design enthusiast, making things is something that i been doing since i was a child, i remember making replicas of the guns and the communications devices used on the TV series "Space:1999" and making a simple inverted V shape camping tent when i was 12! Thanks for the comment and for watching my videos!

[@ScoutSniper3124]

It's been several years ago, but I wanted a Reefe spear gun and couldn't afford one. I went to Lowe's, came out with some red oak 1x2's and some brass parts for a gate lock, the kind with a sliding bar. I fabricated the trigger, and rolling bar safety out of stainless steel I had laying around the garage. routed out the trigger housing and glued two pieces of 1x2 together for the body and another piece for the pistol handle (modeled after an M-60 machinegun handle). Used a scrap piece of stainless steel for the shaft and an actual spearhead tip with folding barbs I had found earlier on a dive. The only thing I bought from the dive shop was 3 spear gun bands with the wire for holding into the shaft. Worked like a champ and spend a total of about 40 bucks on it, including the bands. Still have it laying in the closet, the bands are rotted with age and need replacing. But you're right the fun was in the project itself.

[@ScoutSniper3124]

PS. used the brass gate lock piece for the guides the rod traveled through on top of the wood itself.

[@MrMyvids4you]

Ryan Taylor Hello Ryan Taylor, It is amazing what any one can do when there`s a will beind any project in life! thanks for the comment and good dives!

[@robertsmith9587]

Awesome. Just awesome. Looking forward to part 5 of the SpearGun build. I really hope you can put out those plans when you are finished. I'd love to buy them and make my own Plywood Speargun.

[@MrMyvids4you]

Hello Robert, as you know i´m building two spearguns, i decided instead of making two equal speargus why not making a "roller speargun" too! i just finished the Cad design, i´ll post a video soon showing the 3D model, after i´ll start working on part 5 (as time permits!) Making the plans available will take some time, i want to field test every thing for a long time to know that it works, that is reliable and most important that is safe to use! Thanks for watching!

[@hodgeviper]

I really love watching your videos & your craftsmanship.....you're the Master! I had always wanted to build my own speargun & your teaching is awesome....thanks!

[@MrMyvids4you]

Hello Hodgeviper, Thanks for the kind words and for watching my videos! The nest video will take some time to be uploaded, during the summer months my work gets very busy and I get no time to make more videos! Sorry!

[@JamesBond-el1ch]

the best info on how to build a speargun good job.. can`t wait for part 5

[@MrMyvids4you]

Hello James Bond, Just hang on, you can make it! after all you are James Bond!! Thanks for watching my videos!

[@JamesBond-el1ch]

MrMyvids4you :P

[@LuaiGhazali]

Well done MrMyvids4you. Looking forward to part 5...

[@MrMyvids4you]

Hello Luai Ghazali, I know part 5 is well overdue! thanks for watching my videos!

[@docmcpot4651]

very good and clear instructions! your triggermech looks mighty fine! the part that earned you my sub is the conversion of a normal- to a routerbit! im always struggeling to find just the right bit! thank you for this, and all your vids!

[@MrMyvids4you]

Hello Mcpot, some times improvising is the only way! thanks!

[@cemtolun8002]

Keep up The good work! Look forward to your next video.

[@jimmyswing]

your channel has so much potencial....in 2or more years when your famouse remember me...you are awesome

[@helderreis9568]

Hello James Mohammed, Thanks for the support, and for watching my videos!

[@MrMyvids4you]

Hello james, thanks for the support, and for watching my videos!

[@hondablade929]

Nice work mr.i m from malta small island in d mediterrenian with lots of spearfishers.waiting for part 5 as everybody is doing.keep it up

[@MrMyvids4you]

Hello hondablade929, I now part 5 is well overdue, unfortunately it will take me some more time to start working on the speargun project again! The good news is that i´m editing a new video that i´m planing to upload soon, but it will be about Blowguns! As you may now to make these kind of videos takes time and effort, so bear with me and I´ll try to upload part 5 as soon as possible! Thanks for the comment and for watching my videos!

[@makersmark88]

Wow nice work on improvising !

[@MrMyvids4you]

Hello makersmark88, Thanks for the comment and for watching my videos!

[@cid151]

Nice work

[@ibrahimawad9610]

Amazing work

[@MrMyvids4you]

Hello Mr. Ibrahim, thanks for the comment!

[@rachmadsantoso5010]

Nice work,and excellent vid tutorial,i think better to keep the track "V" shape because less friction to the spear, thanks alot

[@MrMyvids4you]

Hello Rachmad Santoso, I suspect the reason the "V" shape wasn`t adopted by the professional makers is because it limits the size of the spear shaft to one size only, the size that the "V" was cut for, using a bigger shaft will move it up on the track and that can prevent it from locking in to the trigger mechanism. That`s my opinion. Thanks for the comment and for watching my videos.

[@sammann4891]

Hi Mrmyvids4you, I have enjoyed your videos and I am making a speargun just like yours. I was wondering if you are going to make a video about the shaping of your gun and how you finish it. Any tips for making it would be appreciated.

[@telbera]

Hello Mr : I can not wait to Part 5

[@MrMyvids4you]

Hello Telbera sky, during the summer months I don´t have time to work on this project or making more videos, however summer is almost over, and if my work permites I will start working on the spearguns soon (one more month!) and part 5 will be the next video! Please be patient!

[@noeltaon6510]

Great...Thank you for sharing your amazing skill.

[@MrMyvids4you]

Hello noel taon, glad that you liked it. Thanks for the comment and for watching my videos.

[@majdq8]

Excellent workmanship skills. I need a friend like that around my workshop! Can't think of any problem that you wouldn't find a solution for!

[@MrMyvids4you]

Hello Majdq8, thanks for the kind words. I visited your channel, I´m verry impressed with the results that you got from those spearguns, congratulations!

[@ramilbanagua6768]

very nice i love to make a spear gun, finally thanks for you video..

[@MrMyvids4you]

Hello Ramil Banagua, Thanks for the comment and for watching my videos!

[@JamesWright1955]

I was wondering where I was going to get that tool. Thank you very well done video.

[@helderreis9568]

Hello James Wright, I´m glad I can help, Thanks for watching!

[@MrMyvids4you]

Hello James Wright, I´m glad I can help, Thanks for watching!

[@iwanacok6189]

Beatifuull Beatifuull

[@MrMyvids4you]

Hello Iwan Acok, I'm glad that you liked it. Thanks for the comment and for watching my videos.

[@tarfayaswayah7460]

شكرا لك يا أخي

[@MrMyvids4you]

Hello tarfaya swayah, Thanks for watching my videos!

[@spearguncc9902]

It is very happy to watch your video . i want to watch part 5 ^_^

[@Achabab]

me too

[@MrMyvids4you]

Hello speargun cc, summer is the busiest time of the year, I have very little time to make more videos, part 5 will take some time, sorry!

[@MrMyvids4you]

Abedelatif ibnouelmhdi Hello Abedelatif summer is the busiest time of the year, I have very little time to make more videos, part 5 will take some time, sorry!

[@bongomaster2291]

Realy Love your Videos But i'm waiting for Part 5 :)

[@MrMyvids4you]

Hello Bongo Master, part 5 will take some time, during the summer months my work gets very busy and I don´t have time to make videos, i´ll resume the construction of the spearguns after the summer is over. Thanks for watching my videos!

[@عبدالعزيزالمناعي-ط2ج]

Nice work and liked it so much I wish you success forward

[@MrMyvids4you]

Thanks for watching my videos!

[@alwinpontemayor5573]

I have been watching this video for how many times juat to see the latest video update or to see the result but its till nothing. Im hoping to see the result. I have made my own speargun and also a trigger mechansm but i wasn't able to upload it due to low connection of my wi-fi. But anyway you are a gret guy and good guy by sharing your skill,.

[@MrMyvids4you]

Hello alwin pontemayor, Part 5 is the video that every one is waiting for! just be patient! Sorry!

[@alwinpontemayor5573]

+MrMyvids4you. You dnt hve to say sori. Thanks for the reply , i just only need an update ,

[@a7bk198830]

Very nice work I am very impressed with the project in which you had made. I'd like to build, but the equipment is not with me.

[@helderreis9568]

Hello Metab, thanks for watching my videos!

[@MrMyvids4you]

Hello Metab, thanks for watching my videos!

[@andreassidi2861]

nice way to make the rail...from a dril???!!! i have a big problem to find the right tip for my router...

[@MrMyvids4you]

I made the cutter from a drill just because i couldn´t find one for my router, and are expencive too! Thanks for watching!

[@susannezellerhirzel1382]

Very nice video again!!! You should buy yourself an angle grinder for metal-cutting-processes. So you can use 1 mm grinding plates and they will cut the hard metals you work with just like butter. These machines are not very expensive but making the cuts much easyer for you. But think about safety gear, the fire problem (wood and flints!!!) and get yourself some practice whith the machine just before you start using it.

[@MrMyvids4you]

Hello Mr. Petrosilius, I do have a small algle grinder, however, the risck of fire is the reason i don´t use it. Thanks!

[@waddahabosaif8089]

thank you mr Myvids4you·

[@MrMyvids4you]

Hello Mr. Saif, thanks for watching!

[@stevenluu4864]

what type of trigger system is that?

[@hadzila]

svaka cast!

[@MrMyvids4you]

Hello Had Zila, Thanks for the comment and for watching my videos.

[@holkoltd1746]

Good job, how r you planning to hold the front of the spear on the speargun?

[@MrMyvids4you]

Hello L SP, the most common way is to wrap the shooting line over the spear shaft!

[@MrMahoozi]

very intersting videos are you going to upload more parts to this video? so exited to see the end

[@MrMyvids4you]

Hello Mr. Mahoozi, yes I will upload more videos, the problem is that at this moment I don´t have much time to work on the spearguns. Thanks for watching!

[@anthonyclarke352]

Bravo!

[@MrMyvids4you]

Hello Anthony Clarke, thanks for the comment and for watching my videos!

[@iwanacok6189]

👍👍👍👍👍👍👍👍👍

[@MrMyvids4you]

Hello Iwan Acok, thumbs up to you too! Thanks for the "comment" and for watching my videos.

[@ligitylag]

Alright thanks anyway I'll just continue watching your videos! Any way you could give my the dementions/measurements of the designs?

[@dmcloughlin1511]

very brave I'm proud of you. Question: how do you know your drill bit in centered after grinder the shaft to 1/4"?

[@MrMyvids4you]

Hello D McLoughlin, it will never be perfect centered, it´s important to keep a steady hand when turning the drill, i checked this tool for run-out and it was very little. With a small diameter like this one and not having the cutter sticking out to much out of the collet and making lite cuts, it works fine. (use it at your own risk) now i´m safe from the lawyers! Ha ha Thanks for the comment and for watching.

[@augustofaria1776]

Bom dia dos Estates Unidos. I'm originally from Lameirinho, Terceira Açores. Your spear gun project is awesome. I'm planning on making 2 spear guns myself. Is it possible for you to make available the trigger plans available in put format so I can print them... Again awesome videos. Keep up the great work, ate a prosima...

[@MrMyvids4you]

Olà Augusto Faria, many people have requested these templates, unfortunately at this time that will not be possible, after i finish these spearguns I want to field-test it for a long time, to guarantee that is reliable and safe to use! only then I will decide if I can make it available. For now the only dimensions that I can provide are: Housing = 65x30x13mm two milimeters thick Trigger and Sear= 5mm thick Material = 316 grade stainless

[@cemtolun8002]

Could you make à double roller in à travel version like The euro traveller from riffe?

[@kuralbekizimbergenov2338]

Hello. I'm interested in your trigger mechanism, whether you are selling?

[@MrMyvids4you]

+Kuralbek Izimbergenov Hello Kuralbek Izimbergenov, no i´m not selling it, this is just a personal project! Thanks for the comment and for watching my videos!

[@yasin_coder_modz2749]

Can u make same thing simple that u can make home without the machine. 😁

[@MrMyvids4you]

Hello yasin_coder_modz, yes I can, but for now I`ll use the machine. Thanks for the comment and for watching. P.S. Visit my channel #Mrmyvid4you"

[@ligitylag]

What are the chances of you making and sending me one of your trigger systems! I have no where near the amount tools needed for this type of building!

[@MrMyvids4you]

Hello Ligitylag, sorry, not possible! Thanks for watching my videos!

[@MakeItOrLetItBe]

do you gonna release the final part?

[@MrMyvids4you]

Davide Marselli Hello Davide,yes i will, i´m working on part 5, i just don´t have much time to do it, please be patient!

[@nikolaantunovic6100]

Hey great video,one question can you make video "how to make speargun reel" or something like that. Thanks

[@MrMyvids4you]

Hello Antunovic, will be some time before i get to the reel, first i need to finish the spearguns! Thanks for watching!

[@elpinguinozt3027]

where I get the trigger as it is called nice video hope your answer.

[@MrMyvids4you]

Hello El pinguino ZT, I don´t know if you are asking for the drawings of the trigger or if you are asking where can you get the trigger already made. I designed the trigger myself and for now i can´t make the drawings available till i finish the spearguns and test it for some time to guarantee that is safe to use, at this time the only demensions that i can provide are: the trigger housing= 65x30x13mm the wall are 2mm thick the sear and trigger are 5mm thick and the material is 316 grade stainless steel

[@luizfranci]

Good night Dear friend; I live in BRAZIL my english is very bad but I would like to congratulate you for your work; Your project was the best I found on the internet; I wrote on your page I would love your favor if possible and of course; And I am unable to work at all for health reasons, but I have some friends who are helping me here; I would like the following if you do not mind; If you have the entire project with the actual measurements of your great project. Thanks in advance, big hug.

[@arnoldavila5962]

how much for one of your spear guns ?

[@MrMyvids4you]

Hello arnold avila, not for sale, just a personal project. Thanks for the comment and for watching my videos.

[@sailingddcircumnavigation5931]

Great work I'm going to try one. Do you have a FBook page?

[@MrMyvids4you]

Hello Sailing DD Circumnavigation, good luck on your project. No Facebook. Thanks for the comment and for watching my videos.

[@WV591]

All you had to do to was to offset the router bit and run it twice opposite and you would get perfect 9mm instead of all this work with drill bit.

[@MrMyvids4you]

+WV591 Hello WV591, that was my first plan, in a test cut piece i fond that it was almost impossible to control the size and to maintain the slot in the center of the speargun stock. Thanks for the comment and for watching my videos!

[@sekret45]

❤

[@orlandopereira4320]

Bem feita

[@MrMyvids4you]

Hello Orlando, thanks for the comment and for watching my videos, great job you´re doing on the sailboat!

[@woodwork1988]

Where did you get the shaft and trigger from?

[@MrMyvids4you]

Hello Wood Work, The shaft I bough it from a local spearfishing store, the trigger mechanism I made it my self, visit my youtube channel "Mrmyvids4you" and watch the series of videos showing the building process of it. Thanks for the comment and for watching.

[@syed.farhan_7]

Sir plss make video how to make a Revolver

[@MrMyvids4you]

Hello Syed Farhan, the way things are in this youtube platform, if I was gonna make what you suggest, it will be the end of this channel. Thanks for the comment and for watching my videos.

[@hungle5234]

Gia bao nhiêu

[@MrMyvids4you]

Hello Hung Le, not for sale. Thanks for the comment.

[@robeljolina4634]

Can u add a plan or blueprint sizes

[@MrMyvids4you]

Hello robel jolina, that will not be possible, however i can give you some overall dimensions of the spearguns. The roller speargun: 1200mm long (end to end) 950mm from the center of the rollers to the edge of the trigger pocket 50mm wide --------- Traditional speargun, 1200m long 950mm from the edge of the rubber bands hole to the trigger pocket 50mm wide from the but plate to the end of the trigger pocket and tapering down to 40mm at the tip (muzzle) Thanks for the comment and for watching my videos.

[@robeljolina4634]

Hello Mrmy tnkx for the reply I'm so happy..can u send me pls the overall plan at my gmail. Tnkx so much godbless and more power to u always in good health

[@garthlindsay8263]

what happened to the finish product? do you sell these spear guns?

[@MrMyvids4you]

Hello Garth Lindsay, I´m making these spearguns and posting the videos at the same time, at this moment the spearsguns are just the way you see it on video: Part 4. This is a personal project, I never made a speargun before or a trigger mechanism! and I don´t sell spearguns! Thanks for watching!

[@garthlindsay8263]

ok cool. but do you actually try them. do you spearfish?

[@MrMyvids4you]

Garth Lindsay Afterr I finish these spearguns, I will make a video showing my first time fishing with these new spearguns, I do spearfishing since I was 16 years old!

[@Achabab]

thank you very mutch

[@adrianolopes2352]

mostre mais dicas gostei

[@MrMyvids4you]

Thanks for the comment!

[@Иван-ф1я8ц]

Show results finishing ))

[@MrMyvids4you]

Hello NBAH, Part 5 will be the next video! just be patient, i´m working on it! Thanks for watching my videos!

[@Иван-ф1я8ц]

MrMyvids4you I look forward to continue. Sam did speargun and your video really helped. thank you

[@jimmyswing]

you should aak for donations for a better camera...you more than deserve it

[@MrMyvids4you]

Hello James, yes you are right, my camera needs to be replaced. I`m saving money to buy a better editing program first, the lighting on my garage is not the best either! Thanks for the comment!

[@emiliososamartinez2056]

hello friend the truth I love your videos I can not speak English is 40% English and is not enough to understand everything you say in your videos xD! and as I write today thanks to # googletraductor but: thanks for your teachings and the high quality of your videos and ami and friends as we are big fans of the sub fishing just hope to someday be able to have all the tools that you've got I'm from Tampico and from here I send you a big greeting and a big thank you for your videos PS: please, please, please-captioned videos plx xD! since I have not actually how to do or look ay elderly donot see the part # 5 of making a speargun again congratulations and thanks

[@helderreis9568]

Hello Mr. Emilio, Thanks for watching my videos!

[@MrMyvids4you]

Hello Mr. Emilio, Thanks for watching my videos!

[@عبدالعزيزالمناعي-ط2ج]

!!!!!

[@jasmineharris9260]

Waht up

[@MrMyvids4you]

+Jasmine Harris part 6 is done and posted! Thanks for the comment and for watching my videos!

[@abdoumir4175]

why cut you the wood and then you paste??? in the others video !!!

[@MrMyvids4you]

Hello Abdou mir, it makes wood stronger and more stable to minimizing wood worping, Thanks for watching!

[@abdoumir4175]

MrMyvids4you no i shudder think you for you tutorials

[@Achabab]

Nice work and liked it so much I wish you success forward

[@MrMyvids4you]

Hello Abedelatif, thanks for watching!

[@iwanacok6189]

👍👍👍👍👍👍👍👍👍

[@MrMyvids4you]

Hello Iwan Acok, thumbs up to you too! Thanks for the "comment" and for watching my videos.