How To Make A Wooden Wheel | 4-Ways Woodturning Project

Sam - • Turning Something with...
Mike - • Woodturn a Wheelie Bug...
Richard - • Richard Raffan turns a...

[@Bootes1]

Hey Tomislav, great little project, especially when you’re pushed for time. Don’t you go worrying about keeping this bunch of old wood spinners happy at the moment, we’ll all still be here when you are up to speed again. Now off to see what Richard, Mike and Sam are getting on.

[@whittysworkshop982]

Same.......... Dony be worryin about us, ya have more important things goin on at the moment Tomi. Like Bootes said; we will still be here, so no rush lad 😁

[@tomislavtomasicwoodturning]

Thank you lads🤗

[@alanneel2749]

No apologies necessary, your priorities are where they should be! Your channel has great content and we are always learning from you!

[@christopherharrison6724]

Best looking pizza wheel I’ve seen lucky boy having such a talented Dad

[@tomislavtomasicwoodturning]

Thank you Sir, I'm the lucky one☺️

[@racheldray1057]

It was plenty! I love the idea of a pizza cutter wheel for the project. Nice toy. Thanks for getting it done

[@mootnmike]

Well done with the time you had. That was a bit of history as the last piece from the old workshop 😢.

[@MarklTucson]

That red heart is beautiful wood and the carnauba wax really makes it shine. Appreciate the fact you were able to make a video for this month's 4 ways project given your need to relocate. No need to apologize. Looking forward to seeing what comes from the new shop.

[@tomislavtomasicwoodturning]

Thank you Mark

[@baconsoda]

Tomislav, you don't need to make any apologies or compensate us in any way because I'm sure most of us have experienced sudden changes in circumstances... I sure have and wish I'd been as productive as you when reacting to them. You are doing a great job. Best Wishes, Brendan.

[@MandyDavis-gr5ip]

Nothing to apologise for, thanks for sharing your wonderful video's best of luck to you and your family in your new home and work shop, these things are sent to try us ,☘️

[@randyrockwell6136]

Very well done and we appreciate your taking time out of your busy life to turn this project 🤠🇨🇱

[@tomislavtomasicwoodturning]

Thank You Randy

[@DavidBird-uu8km]

Very nice, good luck on moving into your new shop. off to see the other three.

[@woodymadam]

Tomislav, breathe… relax, we’re all your friends and you never need to apologise to friends, they understand. The move and your family comes first. We’re all here for you and will be when you’re ready. Great little wheel, I bet your son was chuffed. Thank you for all you do.😊

[@RichardRaffanwoodturning]

I hadn't thought of turning that sort of wheel. Very nicely done.

[@glencrandall7051]

That's the beauty of this four way challenge. You each can have a different thought on what to make.🙂🙂

[@tomislavtomasicwoodturning]

Thank you Richard

[@tomislavtomasicwoodturning]

True,that was whole idea and I'm honored to be in company like that

[@StraightThread]

🌝⭐🌟 Good job, Tomislav! 🌀 And the wheels keep turning. 😉

[@kenvasko2285]

No need to apologize. We totally understand. The wheel is done well. Thanks.

[@billstoffle7383]

No worries mate can’t wait for you to be in your new shop

[@glencrandall7051]

Great project idea Tomislav. You put an entirely new thought to what to make. Two race cars, a pull toy and your toy pizza cutter. Well done. Thank you for sharing. Have a great day and stay safe.🙂🙂 PS: Good luck with the move.

[@tomislavtomasicwoodturning]

Thank you mr.Glen, I really appriciate that

[@tonywatson5551]

no need for apologies Tomi. We all wish you well in getting through a very difficult time and family must always come first. can't wait to see your finished new shop. all the best Tony

[@markduggan3451]

You can do in a few minutes, something that would take me half a day. I look forward to seeing you turning again.

[@tomislavtomasicwoodturning]

Thank you Sir

[@DougMilleratWoodSpunRound]

Lovely wheel. I assume this is for a pizza cutter. Nicely done.

[@tomislavtomasicwoodturning]

Yep,for my boy toy pizza cutter ☺️

[@richardwhisler5593]

Nicely done! Especially when you have so much to think about and put into action. I don't think any of us are put off by your presentation. We all realize that getting your new shop functioning is your prime priority. You need to get to making money for your family. It's amazing how much food growing boys require!

[@tomislavtomasicwoodturning]

Thank you Richard, that is sooo true, funny enough younger one is like a termite and eats a lot🤣.

[@stevenhansen8641]

🕶thanks Tomislav

[@William_Kenny]

Nicely done tomislav, don't apologise mate we'll all be waiting and looking forward to seeing you in your new space. Cheers from will 👍 😊

[@tomislavtomasicwoodturning]

Thanks Will,I can't wait as well😀

[@AlienLeader4]

Awesome project. Always learn some new techniques from watching you work. Keep up the awesome work. 👽

[@tomislavtomasicwoodturning]

Thank you

[@johnnyb95678]

The wheel turned out beautifully. Please don't apologize for this one. Life happens and you have a lot going on right now. Thank you as always for sharing your knowledge with the rest of us.

[@tomislavtomasicwoodturning]

Thank you Johnny ☺️

[@renegadezero0]

There's nothing to make up, life happens. Just keep doing what you do, your work is amazing.

[@kaybee2300]

Getting your shop set up is more important....

[@frederickday7600]

I'm impressed that you managed to make any video at all given the amount of work you have to do. Well done..

[@sanctuaryjunction8413]

Glad you made this video. I am going to create those two tools and try them out now.

[@samangeloturns]

Excellent Job.... 😃

[@tomislavtomasicwoodturning]

Thank you Sam

[@alainnoel2198]

Thanks and don’t feel bad… good luck with your moving

[@fern6114]

Good bye old shop…. Hello to the new one with new future, cheers from Luxembourg 🇱🇺

[@tomislavtomasicwoodturning]

Excactly, the feel I have in new shop is so warm and fuzzy☺️

[@robertreihsen9096]

Thanks man! Good luck with the relocation.

[@boooshes]

Hey, we're just here to learn and support you.

[@garthkeck2003]

Don't worry about a short program. We've all been there

[@danangel586989]

Don’t feel bad no apologies needed, we all know you do awesome work and you teach very well. Good luck with your move. Hope everything goes smoothly.😊

[@tomislavtomasicwoodturning]

Thank you 🤗

[@gregdownunderinOz]

Well done Tommi, you don’t need to apologize at all. You certainly have enough going on ATM. Great tool use with scrapers You make them look so easy to use. I’ve tried but am no way any good with them other than finishing bowls and removing fine lines form tool marks

[@tomislavtomasicwoodturning]

Thank you Greg,its just practice and once in a while you need a day or two break to soak in the feel.... That works for me great

[@ianbedwell4871]

So question is there a reason you couldn’t reverse the plate and put is back on the screw chuck? Nice project and best of luck with the shop build

[@tomislavtomasicwoodturning]

Thank You sir for watching 🤗 There is no reason why not to reverse on screw but from expirience it likes to chip the grain on really hard timbers like this red heart

[@ianbedwell4871]

@@tomislavtomasicwoodturning thank you, I have only made pine wheels so wasn’t sure but hardwood chip out makes sense

[@jayscott306]

That is a fine wheel. Looking forward to that first video from the new shop. I hope everything is going smoothly. I need to email you, as well. I'll see if I can find a link in your channel page. Guess I can send on IG, too.

[@tomislavtomasicwoodturning]

Please do, If I can help with something I'll be glad☺️

[@Cementhead48]

Very good video. Great wheel

[@turningwiththewoods]

No apologies needed. Take care of what needs to be done. Thx.

[@BobBlarneystone]

No apology necessary - getting the family and shop settled is far more important.

[@user-zm8kb9ck5h]

no need to apologize

[@jorisdemoel3821]

That is a very red piece of wood! How did it turn? Your kid won't have to pretend there's tomato sauce on his pizza cutter, it's clear there is! No worries, everyone understands you're under a lot of pressure. Thanks for the video!

[@tomislavtomasicwoodturning]

Soo true Joris, its great to turn ,its off cut with splits from that coaster I did for you, should be great once we start the orders and I can't wait to make something bigger out of it

[@bradbyers6865]

Don’t worry, we’ll wait until you can finish it in your new shop.

[@slobodanpjerov3303]

Pozdrav Tomislave. Gledam vašša videa i puno učim iz njih. Veliko vam hvala. Htio sam da mi date jednu informaciju. Imam rp 320dml kao što ste i vi imali i zadovoljan sam da njim, no planiram kupiti još jedan da mogu izrađivati malo veče zdjele. Pretežno koristim suhu maslinu. Nečkam se oko coronet herald ili envoj. A znam da ste imali jedno kratko vrijeme coronet envoj. Možete li mi reći nešto o njima i zašto ste kratko koristili regent? Ako mi možete dati koji savjet super, ako ne i dalje vas rado gledam i učim od vas. Pozdrav iz Splita. Slobodan Pjerov

[@tomislavtomasicwoodturning]

Pozdrav Slobodan, naravno ako mogu rado cu pomoći, nisam imao envoy nego regent, i dobar je tokarski za tu cijenu, envoy takoder jedino ako se ne varam regent ima bolju Siemens elektroniku ali svejedno koji uzmete bit ćete zadovoljni.... Mene smetaju neke stvari na njima koje su vise za proizvodni program koji ja radim pa meni ne odgovara dulje zaustavljanje i slicno...ali za hobiste i polu profi je super stroj. Herald je super stroj ali posto vec imate dml320 onda nije tolika razlika između njih a sa envoy cete ipak moci puno vece i teze stvari....i cesto znaju biti kod Tobi.si na akciji

[@slobodanpjerov3303]

Zahvaljuje na odgovoru. Da, sve nabavlja u robi, si. Pozdrav