Great video, very informative, clear to understand, easy to build and setup. Thank you
@PawPawsWorkShop2 жыл бұрын
You’re very welcome. Thanks for watching
@harldave98504 жыл бұрын
You're always so informative. I love watching your videos and have made some of your projects for myself. This one is a must!
@PawPawsWorkShop4 жыл бұрын
Thank you so much! That is really awesome to hear.
@dicelabiblia74614 жыл бұрын
Thank you so much for the video. Very instructive and CLEAR. Blessings to you
@PawPawsWorkShop4 жыл бұрын
You're very welcome. I'm glad that it helped you.
@thx1138y4 жыл бұрын
Well done Paw Paw´s this is going to my probe collection videos Tks very much!!!
@PawPawsWorkShop4 жыл бұрын
Awesome! Thank you! They do work well.
@ooheaven14592 жыл бұрын
I love the expanding heat shrink tubing ....
@PawPawsWorkShop2 жыл бұрын
Awesome
@sj-kp1ks3 жыл бұрын
Thank you! This is exactly what I needed to see.
@PawPawsWorkShop3 жыл бұрын
You’re welcome
@EnSabac4 жыл бұрын
I love it, Great job explaining every step. You made it look easy.
@PawPawsWorkShop4 жыл бұрын
Glad it was helpful! That's awesome!
@nicobrooks5153 жыл бұрын
Thank you for your service
@PawPawsWorkShop3 жыл бұрын
Thank you very much. I appreciate that
@kuravani19634 жыл бұрын
Very Easy and very cheap ..... Thanks for the video...
@PawPawsWorkShop4 жыл бұрын
Thank you very much.
@garyprice484 ай бұрын
So the purpose is to make sure and have the bit touching the surface that your cutting and your spot on every time. Correct??
@PawPawsWorkShop4 ай бұрын
Yes, that is correct. You must tell the machine where it is exactly
@PawPawsWorkShop4 ай бұрын
Yes, this tell the machine exact where the tip of the bit is located on the z axis
@andrewjohns68234 жыл бұрын
well done, your explanation makes it look simple.
@PawPawsWorkShop4 жыл бұрын
Glad it was helpful! Thank you very much.
@harldave98504 жыл бұрын
Your circle finder you showed how to make is worth its weight in gold!
@PawPawsWorkShop4 жыл бұрын
Thank you very much. It's a great addition to the shop. I use it more than I ever thought that I would. I wonder how I managed without it.
@SimplySellers2024 жыл бұрын
If you had a piece of wood secured to the work surface, could you use the same probe to set the X and Y zeros by placing the metal vertically against the the edges of the board?
@PawPawsWorkShop4 жыл бұрын
Interesting thought. I am going to build a three axis probe, again, I am going to do it with scrap material I have around the shop. It will not be long.
@musicmaze6403 жыл бұрын
I've got an X-Carve with a Z-probe. Do you have a video that shows how to ensure that the machine knows the exact thickness of the puck? I had some strange results tonight. Thanks!
@PawPawsWorkShop3 жыл бұрын
As you go through the machine setup it will ask if you are using the probe. If you say yes it will take you to a separate menu where you will key in the information including the thickness of the probe puck. It will then as you to test and then complete the setup.
@daengtonji13664 жыл бұрын
Hi, this amazing tutorial video, clear and easy to follow, I'm using UGS v2.0, I have tried using the Probe Module plugin and I have a little trouble implementing it, can you make a video using UGS v2.0, I really appreciate it, thanks
@PawPawsWorkShop4 жыл бұрын
I'll look into it. I have not downloaded UGS v2.0.
@billydickens88964 жыл бұрын
As always Paw Paw very informative video. I would like to use this flat bar technique to replace the standard round brass z probe I got with my X carve. How would you change the thickness settings for the new probe in Easel?
@PawPawsWorkShop4 жыл бұрын
When you are in a project you have to go back into the machine setup and follow through with all the steps. When you get to the probe, touch for contact, the screen will pop up with continue or at the bottom is advanced. Click on that selection and you will be able to change all the settings including the plate thickness.
@ScrewThisGlueThat4 жыл бұрын
Paw Paw, in UGS go to Tools, Plugins, Click Probe Manager.... Now you will have a Tab Called Probe Manager. Then you can do this process without having to use Console.
@PawPawsWorkShop4 жыл бұрын
What version of UGS is that found? I do not see that in version 1.0.9 that I am using.
@ScrewThisGlueThat4 жыл бұрын
@@PawPawsWorkShop V2, Nightly Build. I have used it without any issues whatsoever.
@PawPawsWorkShop4 жыл бұрын
I will look at this and may switch. Thank you
@psacentralcoast69704 жыл бұрын
Great vid
@PawPawsWorkShop4 жыл бұрын
Thank you very much.
@GoGreenMan Жыл бұрын
would this probe work with an old x-carve? thx
@PawPawsWorkShop Жыл бұрын
Yes you can use that. Just need to enter correct thickness of the probe
@DrayDigital2 жыл бұрын
Is there a reason my z axis goes up instead? I have tried both positive and negative values. it goes up either way. Running a demon controller on a NewCarve.
@PawPawsWorkShop2 жыл бұрын
It sound like you have a wire reversed. You have four wires. Switch two of them
@tesg9551 Жыл бұрын
Great
@PawPawsWorkShop Жыл бұрын
Thank you very much.
@SeaDaPhotos Жыл бұрын
Why is the video of the screen so blurry and moving so much I can't read what is being done. It does not look like the UGS that I've been using
@PawPawsWorkShop Жыл бұрын
This is an older version of the UGS
@SeaDaPhotos Жыл бұрын
@@PawPawsWorkShop thanks I figured it out, found a James Dean video and got it configured and working, thanks
@mecrocosme31723 жыл бұрын
CarlosCNC App is good for Universal Gcode Sender
@KJ7JHN7 ай бұрын
PCB perf board
@mattwilbur66154 жыл бұрын
Love all of your videos, but 3.1 mm is 0.122 inches, not 0.125 inches - or 1/8 inch: 3.1mm/25.4mm/inch = 0.122 inches. Not a huge deal because you're not risking crashing your bit into the wasteboard with your setup, but you are still 0.003 inches above your board. Keep making the great, and very useful, videos!
@PawPawsWorkShop4 жыл бұрын
That is why when I put it to 0 it went to .002. Thank you very much for this information. You are 100% correct. I believe that I can live with .003 off.
@jest29273 жыл бұрын
de pronto,el ejez sube en vez de bajar
@PawPawsWorkShop3 жыл бұрын
When you wrote the gcode you left put the "-" sign in the wrong place. The "-" will move down .
@jest29273 жыл бұрын
@@PawPawsWorkShop Parece ser,por lo que estoy leyendo,que no soy el único que le ocurre ésto.Los signos estan todos correctos,ademas,da alarma.Fijese en este comentario community.carbide3d.com/t/z-probing-backwards/6290/6