This quick draw Knife case goes to the winner of my 700 subscriber contest the winner was "gsrgopedrider247" and the hatchet case's went to blade1234jj and smallgameslayer Thanks for watching and please subscribe .
Пікірлер: 67
@dford45911 жыл бұрын
Where would I find the pattern for this sheath, I'd like to try and make one. Great videos by the way!
@jenkins19792 жыл бұрын
Love your design thank you for video
@jerielyork19852 жыл бұрын
Thank you you're clear explainable to what you've done and what to do except for one thing where do you get the pattern from thank you
@TheLushie11 жыл бұрын
I'm with several of the other fellas - how did you arrive at the template? GREAT idea and implementation, but you went a bit fast for an utter newbie like me.
@douglasreid93 жыл бұрын
Love it
@weaglem200211 жыл бұрын
the swivel knife is not mat to cut threw leather, its made to cut designs into the leather, if you are looking to actually cut the leather use a utility knife or some heavy shears, if you get the leather wet (case it) makes it soft and easier to cut/work with
@rockwool211712 жыл бұрын
lol the mule deer hanging was great.subscribed
@thetimetohunt13 жыл бұрын
@lwilliamsrdr Man i had no clue what one was tell you told me . so I sat down and came up with my own . I made about 5 of them before I could get it to work . you can get those nylon spacers at just about any hardware store . That was the hardest thing to come up with . I was not sure what type of material to use for the blade to ride on . But they make cutting boards out of it . so i think it will work just fine.
@1030brad12 жыл бұрын
man, thats really neat. Be a great hobby to pass some time while you are not hunting, fishing, or working.
@xxIVANxx1312 жыл бұрын
that looks really cool i'm gonna give it a try!!
@Bowfinger638311 жыл бұрын
thank you. I least I won't spend money on a tool that won't do what I want it to. I would like to be able to make a die, so I can stamp or 'click' out the yoke
@thetimetohunt11 жыл бұрын
Na man i got that deer with a 32 Winchester Special . Them swivel Knifes are about 10 to 30 dollars . It just makes it easy to cut and levees a nice edge . Thanks for watching and good luck. Tyler
@weaglem200211 жыл бұрын
That was great Video, thank you very much, im drawing up a design to try and make this myself. :)
@ferellocoazteca5 жыл бұрын
That was a lot of good, thank you.
@davidwatson96983 жыл бұрын
not real familiar with this form of communication but if you could maybe possibly share how you made the pattern or template for that sheath man I'd share it cuz I'd love to make it for the couple buck knives I have thanks man for sharing your video
@mperkins75413 жыл бұрын
thumbs up from me.cool as heck
@thetimetohunt12 жыл бұрын
Yes it is . It is a awesome Knife . Thanks for watching .
@thetimetohunt12 жыл бұрын
Yes I do . I'm asking $ 40.00 + shipping . They take me 3 - 4 days to make . Thanks for watching and take care
@quentinjackson37783 жыл бұрын
Great video do you have a copy of that pattern or where can I get the pattern from
@SW-Video11 жыл бұрын
Where do you get the nylon washer used so it doesn't dull the knife? Do you make them yourself or can they be ordered from somewhere.
@thetimetohunt13 жыл бұрын
@lwilliamsrdr Man I'm so sorry I could not remember who told me . You should have entered my Give away or at least said something since then . I would have said where I got the suggestion from in the video . Once again i'm so sorry . But I have to ask did this video help you out . It sure was fun making . Thanks for watching Tyler Bates
@thomasrichmond79899 жыл бұрын
Great video too by the way!!
@carlosramayo92216 жыл бұрын
Buenisimo m gusta es ojala pudiara hacerla como aprendis
@thetimetohunt12 жыл бұрын
No it wont because the Blade rides on a nylon washer just like a cutting board . Thanks for watching .
@lwilliamsrdr13 жыл бұрын
I gave you this idea!!! Thanks!
@thetimetohunt11 жыл бұрын
Man i got mine at Ace hardware . But you can find them at any hardware store. Thanks for watching .
@thetimetohunt13 жыл бұрын
@Jared432432 Yes I was. Troop 223 out of Rifle , Colorado. I did not learn this in the boy scouts . I learned every thing About leather from Dave at Tandy leathers in Nashville ,TN
@lwilliamsrdr13 жыл бұрын
I have yet to even think about making it, do you have designs for this or did you just make them up?
@jackrabbitslim6611 жыл бұрын
Do you make the sheaths for people who ask for them, or do you just show how thet are done If you sell them how much?
@GSRGOPEDRIDER24712 жыл бұрын
Where can I get the materials? Im looking for that same hard leather you used and I'm having troubles finding it
@ccasey1013729 жыл бұрын
Love to get one
@siegeandspike11 жыл бұрын
Nice video, thanks.
@thetimetohunt11 жыл бұрын
Man you cant find a pattern any where . It took me 3 or 4 time to get it right . Just try it out . good luck and thanks for watching
@thetimetohunt12 жыл бұрын
@YOYOBOY666999 Thank you very much . That is nice to hear sometimes . I try hard to make videos people will understand and Like . It takes some time and hard work but I get a kick out of comments like yours. Thanks again Tyler From the timetohunt
@thomasrichmond79899 жыл бұрын
Where can I get a copy of the pattern you use for the Leather Quick draw knife case? Working over in S. Korea and would like to try n make one. Please let me know if you can help me out.
@davidwatson96983 жыл бұрын
Hey brother , I watched you the quick draw sheath and would to make a couple myself . Can you tell me how you made the template , pattern for it .
@thetimetohunt3 жыл бұрын
I made the pattern myself . Took me about five or six times before I finally got it right . The best advice I can give you is just take it slow with a lot of construction paper until you figure out a good pattern
@thetimetohunt13 жыл бұрын
@mperkins754 Thank you very much . I try hard to make videos I think people would like.
@LuCaSiZaWzOm11 жыл бұрын
Nice dear
@xxIVANxx1312 жыл бұрын
really like this vid, subbed
@sebasopg155 жыл бұрын
where do you guys order the nylon washers and chicago screws from?
@cobra.38867 жыл бұрын
Sweet holster. do you sell them?
@davidcorral83803 жыл бұрын
Do you have a template for your quick draw I’m handicap and I’m just starting out this hobby for myself not for sale to anyone I probably will make one for both my boys before I pass on to greener pastures so is it possible to send me a template or email me your specs I don’t have much money thanks to Uncle Sam lol but I could send some money to you if this would spark an interest in sending me. Anyways thank you david
@brandonpaul88688 жыл бұрын
Great video. I would like to make one for myself. Can you trace out a pattern on a piece of paper and email it to me.
@chrisvaello58387 жыл бұрын
Where did you get your pattern
@glamb691 Жыл бұрын
Just a suggestion why don’t you have the pattern and parts list drawn up on a pdf charge $20.00 for PDF those that wants to make there own they’ll pay the & $20 for the PDF and you’ll make more money than your making now! If not someone will buy for $40 and reverse engineer it and make it off the PDF.?
@leebarker42077 жыл бұрын
Many people have asked for a template how do you determine the shape and holes I have a Case xx that is just about 3/4 shorter than a buck 110 I want yo make one blade is 3 1/5 and overall is 8 1/4 thickness 7/16 help please thanks
@ediblegreens112 жыл бұрын
Will that Rivet Dull the blade?
@douglasreid93 жыл бұрын
If a person won’t one how much and who to order
@Kiowagoodfella10 жыл бұрын
Where do you get the nylon washers ?
@graceminifarm11 жыл бұрын
Where do you buy the leather like that?
@TheRemington27011 жыл бұрын
How did you make the templet if you don't mind me asking
@antoniodeoliveira1849 Жыл бұрын
Do you have a template available
@Machito898 жыл бұрын
Can I buy a pattern from you I really want to make my own instead of buying one I would appreciate it it's for a buck 110
@dannyfowler24058 жыл бұрын
do you produce a pattern for this sheath?
@HarperTn_42313 жыл бұрын
How much would u sell em for?
@lwilliamsrdr13 жыл бұрын
By designs I mean like PDF plans or something like that.
@carlosramayo92216 жыл бұрын
Quisiera hacerlo las medidas son de acuerdo ala navaja si?
@thetimetohunt12 жыл бұрын
@05091101 Hey man i'm sorry but they don't sell patterns . I made this one my self I had to make 5 or 6 of them before it would work . Keep trying and good luck .
@ctrichell12 жыл бұрын
Do you sell these?
@thetimetohunt13 жыл бұрын
@dharper1647 I'm asking $40.00 each . I can custom make them as well with your name or business logos . I can make them just about any color . Thanks for watching my video I hope you enjoyed it . Tyler Bates
@catchndreams10 жыл бұрын
Blade rides on metal rivet. not good. leather isn't thick enough
@catchndreams10 жыл бұрын
Catchndreams has been using a tephlon washer since 1968. Get your stories straight.
@davidwatson96983 жыл бұрын
Not real familiar with this form of
@davidcorral83803 жыл бұрын
Do you have a template for your quick draw I’m handicap and I’m just starting out this hobby for myself not for sale to anyone I probably will make one for both my boys before I pass on to greener pastures so is it possible to send me a template or email me your specs I don’t have much money thanks to Uncle Sam lol but I could send some money to you if this would spark an interest in sending me. Anyways thank you david