HOW TO MAKE AUTOMOBILISTA 2 LOOK & FEEL GOOD! Graphics & Force Feedback Guide!

[@Wilayaat]

You are an absolute star mate. The GEForce stuff I already knew about and use in AMS2 (along with a reshader) to make it look much better but you've given me some ideas for tweaking. However, the link to the forum article on FFB is the clincher. I was struggling with AMS2 until I read that; it feels MUCH better now 🙂 Thanks for your efforts and keep up the good work!

[@alexkayracing]

No problem mate I’m glad this could help you! Yeah my FFB was absolutely rubbish until I tried these reccomended settings out. They still aren’t perfect though as I noticed that if you take a very fast corner like say that tetra corner at Le Mans, you won’t feel much FFB if you turn the wheel so suddenly, but bumping up the gain settings could help with that too. Still plenty to tweak!

[@Wilayaat]

@@alexkayracing = Yeah, not perfect so still scope for fine tuning but honestly so much improved from the default; all I need to do now is get better at the actual driving 🙂

[@alexkayracing]

@@Wilayaat get used to their slip angle bro, all the cars basically use it and you need to take advantage of it to be the fastest in this game. You will get there 🔥

[@Wilayaat]

Thanks Alex for the tip, will focus on getting this perfected 😊 ​@@alexkayracing

[@kevbarber]

Thanks for this. Am trying your FFB settings and they do feel very good. I have the gain a bit higher as I'm on CSL DD 8nm.

[@alexkayracing]

Glad it could help you mate👍 yes the gain can be as high or low as you want

[@alexkayracing]

PSA - PLEASE don’t stare directly into the sun to see what sun flares look like, I won’t be held responsible for any damages caused 😂

[@pmacnz]

You should be using the nvidia desktop app. Then turn on rtd hdr to add hdr to games that don't have it. You need hdr monitors and windows 11 for it to work.

[@alexkayracing]

Thanks mate will take a look

[@JosephY88]

Excellent Alex

[@alexkayracing]

Thanks for watching Joe👍

[@steffendetrick]

I thought the same thing about limiting cars, but that’s a no go for me. Because cars just will pop up out of nowhere on the horizon, which really breaks immersion for me.

[@alexkayracing]

I think if you make the number high enough then you shouldn’t have that issue, however you’ll have to test that number. For me 20 cars around is usually good 👍

[@davannagle450]

My issue with the game is the lack of consistency in its bonnet textures and reflection throughout its catalogue of cars. Don't get me wrong, it's my most played sim to date but it's lacking polish consistency in its reflections and textures.

[@alexkayracing]

Yeah that’s true, especially weird how the rear view mirror is pixelated; however the side mirrors and rear view cam are always nice and smooth

[@matthewratcliffe1953]

Nice rig

[@alexkayracing]

Thanks for watching mate👍 if you have any questions about the rig let me know

[@fastforward7670]

Nice video, thanks. But with the shown graphic settings and hardware you will never get 90-100fps in the rain 😊

[@alexkayracing]

Seems fine to me! Thanks to reducing the max visible cars it’s easily possible now 🙂

[@phillipbeharall6271]

Thank excellent 👏👏👏👏👏

[@alexkayracing]

Glad it can help you 🔥

[@benoitparadis602]

thanks for that , good info . but should your resolution be set at something like 7790 x 1440 ? the resolution that you get in the Nvidia control panel after the Surround settings are done ? that is what i see in all other vids about settings triple and that is what i have been using for all games .

[@alexkayracing]

When you use the bezel free kit you don’t need to make any adjustments in the nvidia surround settings so it stays at 7680x1440! You actually have to make the “bezel width” value in simulators a negative value. You can see all my FOV settings for the main sims here: kzbin.info/www/bejne/qJCweYBmhNKWbMUsi=_UUtb31zrRPD7axU

[@benoitparadis602]

yes i run whit the bezel in game values at - 35 ishhh theres always minute adjustement ... ( triple 32 inch ) @@alexkayracing

[@alexkayracing]

@@benoitparadis602 yep same as me triple 32 inch! I only ever touch the bezel value in game. I’ve never had to alter the resolution in nvidia surround. Before I had the bezel free kit I remember I had to do that though.

[@benoitparadis602]

so distance to screen is a set # and not the actual distance from screen ? @@alexkayracing

[@A1ejandro1]

@@benoitparadis602 for me using those set values always felt best for me. If you want to try them just save your value you are using so that if you don’t like my values you can put them back :)

[@_Arthur-]

I'm using Fanatec's recommend settings for my CSL Elite together with the Default+ settings, and although it is a bit light, I can feel the details very good. I also tried the Danielkart custum file, but the steering becomes so heavy and slow an all details in grip loss are lost. I don't see any recommendations for the CSL Elite from Reiza. Are there any?

[@alexkayracing]

Hey mate thanks for watching! There are no recommended settings there for your wheelbase but you did the right thing to choose default + as it is designed for non-direct drive wheelbases to provide more information to make up for the weaker FFB!

[@delthius1386]

I've tried the recommended settings on the link for ffb csl dd pro but it feels very light? 🤔

[@alexkayracing]

I would turn the gain up as it’s only 60% in game. Try that and see how it works. 100% should be fine in AMS2 settingd

[@gil827]

Hi Alex, a question... with these fairly high graphic settings, how do you do it when you want to see a replay? With a replay on 3 monitors it is impossible to have 60fps 🤷. Do you know of a way to watch the replay on a single monitor without changing the resolution settings every time? Thank you

[@alexkayracing]

Hi Gil thanks for watching! To watch a replay even on triple screens I’m pretty sure it was over 60 or at least 60 fps for me. I know this because I used to review the replays after a race on my AMS2 live streams with viewers. Unfortunately for recording though,whenever I need to record replays for content etc I need change the resolution to single screen 1440p as it’s too much stress on the GPU. Hope this helps!

[@gil827]

@@alexkayracing strange... with i9 9900k and a 3080TI I had to put all the settings on medium low to be able to have at least 70-80fps in replay but in certain situations (like at the start with 20 cars) I go below 60fps. I don't understand where I'm going wrong

[@alexkayracing]

@@gil827 that is really weird cos you wouldn’t think that the difference between a 9900k and 10900k would cause something like that. I will check again and record a clip on our discord channel to show you the 60fps But I’m trying to think how you aren’t able to get it with those pc specs. What is your RAM?

[@gil827]

@@alexkayracing RAM Crucial Ballistix 3200 MHz DDR4 32GB (16GB X 2). Everything runs on 3 X 32" full HD monitors (5760X1080 resolution)

[@alexkayracing]

@@gil827 hmm that’s very strange because your specs are like mine but it’s struggling on 1080p triples. I’ll check again to make sure I get 60fps in triple screen replay (I’m pretty certain I do) but yes I’ll have a think to see how we can fix this one because it’s very odd

[@MikkSchleifer]

Nice Video Alex, but please try a custom to get the ffb on top🙏

[@alexkayracing]

Thanks bro, no matter how many different custom ffb files I tried, it didn’t feel good for me :(

[@phillipbeharall6271]

Brilliant thank you 👏👏👏 I've liked and subscribed One question in stall Nvida GeForce experience yes or no My pec spec thank you Windows 10 64 bit Intel i7 10700K 3.8Ghz/5.1 Ghz CPU Gigabyte Z490 Gaming X Motherboard 32GB ADATA XPG GAMMIX DDR4 3000MHz 2 ADATA 1TB SX8200 PRO M2 SSD Samsung 860 EVO 1 TB SATA NVidia RTX2080 SUPER Samsung LC49RG90SSUXEN curved

[@alexkayracing]

My pleasure brother, I answered your question in the other post by the way!

[@FlamingCurtain]

Any tips for simagic alpha mini?

[@alexkayracing]

I haven’t used a simagic wheelbase before unfortunately mate, and the forum post didn’t have that wheelbase on it

[@FlamingCurtain]

@@alexkayracing yeah it’s weird, it’s not like simagic is a small brand or the alpha mini is unknown

[@alexkayracing]

@@FlamingCurtainyeah I think it could also be cos they just haven’t updated the post to accomodate more wheelbases unfortunately

[@jgloc25]

@@FlamingCurtain With my Alpha, I just tried Default and adjusted from there, using very similar settings as @alexkayracing in Simpro (ie. WRS-60, MD-10,MF-3,MI-5,Freq-3). In-game I now have Gain-40, LFB-20, FX-20,Damping-50%.

[@peanutssimracing3834]

give these settings ago AMS2 settings .Default / G 55/LFB 27-28/FX 20/D 19 .DD1 settings Sen aut/FFB 50/Ffs PEAk/Ndp 20/Nfr off/Nin 2 or off/Int 4/Fei 40/For 90/Spr 50/Dpr off/Bli off/Sho off// Brf 80

[@peanutssimracing3834]

And turn car specific FFB down 84-86

[@alexkayracing]

Thanks mate!

[@KingRoby81]

Csl dd 8nm in game ? Post patch

[@alexkayracing]

Hey mate whatever the recommended settings are in that discord link :)

[@KingRoby81]

yes I have already seen the link and signed up to your discord channel but honestly I only found the configuration of the csl dd 8nm but not the in game configuration or should I use the same ones you inserted in the video above? A thousand thanks

[@alexkayracing]

@@KingRoby81 oh wait lemme check

[@alexkayracing]

@@KingRoby81 gain:60 Lfb: 7 FX: 50 Damping:50

[@KingRoby81]

thank you, you were very kind, I will try your settings! type instead? I currently use default +

[@miyagiracer]

when you want to feel it good you have to sold your fanatec !

[@alexkayracing]

Ahahaha I would probably change to simucube pro next :)

[@brtcobra]

nothing can make AMS2 feel better

[@alexkayracing]

Thanks for watching 😁

[@phillipbeharall6271]

Brilliant thank you 👏👏👏 I've liked and subscribed One question in stall Nvida GeForce experience yes or no My pec spec thank you Windows 10 64 bit Intel i7 10700K 3.8Ghz/5.1 Ghz CPU Gigabyte Z490 Gaming X Motherboard 32GB ADATA XPG GAMMIX DDR4 3000MHz 2 ADATA 1TB SX8200 PRO M2 SSD Samsung 860 EVO 1 TB SATA NVidia RTX2080 SUPER Samsung LC49RG90SSUXEN curved

[@alexkayracing]

Thanks for your support mate! Do you mean nvidia surround? You can just turn it on to see how it runs, and then if you don’t like it turn it off again! Your pc specs look decent 👍

[@phillipbeharall6271]

@@alexkayracing no I will it be better installing GeForce Experience 7 min 30 seconds on your video Nvidia Filters & HDR on my pc at 75yrs old I need all the help I can get Thank you again

[@alexkayracing]

@@phillipbeharall6271 oh my apologies sorry, honestly for me I still don’t mind the default colours in AMS2. However if you like them to be a little more pop then yes install it and just see if you like it! Then if you don’t light it just remove the filters :)