How to make bevel jig

Thanks a lot for watching, I hope you liked the video!
Don’t forget to SUBSCRIBE!
Folow me on INSTAGRAM!
/ avknives_

[@robertlangley258]

Beautiful job on bevel device. No music: Thank You. No talk: Thank You Great video. Thank you for sharing your expertise. 👍👍👍

[@gunslingerbones]

Best Jig design I have ever seen. As well as best tutorial. Detailed and straight to the point

[@Mwwright79]

Very nice! Probably the cleanest diy jig I’ve seen. Fact that it can be easily made with simple tools makes it that much better. Outstanding!

[@oldpuebloforge]

Best design and execution I've seen for a knife-making jig. Great work.

[@cooperwelsh3471]

Fully agree the best I have found on KZbin. Would be great if you have a description with sizes and a kind of drawing. I am just a beginner and don't have much tools. Thanks for sharing. Cheers from the Netherlands. Hope you provide all the viewers with a description and drawing

[@dullahanblack3090]

Finally a design that doesn’t require welding!! Thank you

[@codydaniel8312]

Man up! Learn to weld...

[@grantdavid9466]

Cody Daniel It is really handy to know how to do!

[@jmiddlefinger]

This is definitely on my project list. Right after I finish refurbishing my lathe so I can build myself a 2x72 belt grinder...

[@frotz661]

Clean and simple. Minimum of tools necessary. Easy to figure out dimensions for myself. I would countersink the hinges and maybe add a nylon pad and handles.

[@jamesrodgers6538]

Props to those who don't use jigs, I know I need one. I'm very good with my hands but getting good symmetry on the belt sander isn't as easy as the pro make it look. This is a great diy jig, I wanted to make a new one and and seeing how well yours came out I'll have to make one similar 👍

[@patrickfreeman8816]

Finally a video showing a jig used to make a small blade, Scandinavian grind! Brilliant (and no welding!!!)

[@Арбалет64]

Всё просто и красиво😊только при сверлении держать заготовку пальцами не серьёзно,можно и травму получить,берегите руки,они у вас золотые👍👍👍

[@graystone3048]

Love this build. Made my own today and it works great. Thanks for posting!!

[@raymondclark1458]

Nice piece of kit and very well built. Thanks for sharing.

[@bobwilliams5506]

Excellent! The only change I would make is to countersink the holes in the hinges to make the screws flush. Thanks for the vid.

[@RedBeardOps]

This is awesome! More sophisticated than the one I’ve been using for sure! Solid

[@Kotik_Chusik]

Спасибо, это то, что я искал. Все просто и удобно! Лайк и подписка. Привет из России Пермский край

[@Swaffles870]

I am very much estatic to get started in this trade and make my own blades one day and this is gonna save me so much time n ensure my products are what I want to look like. That being said, i am not well enough to have a big proper drill like this. Can an impact driver achieve the same job at getting through the steel block with the right bit n oil?

[@cajunpipesmoker1519]

Nice build!!! Thanks for the video

[@craigpierre2765]

Love the design...and easy to put together with minimal specialty tools. Nothing worse than looking at a how to video and its starts off. Lets head to my metal fabrication shop. LOL

[@trevorteague8430]

Very nicely done! I'll buy it! Lol

[@3674Vladimir]

Один из не многих, кто пользуется нормально заточеными сверлами. Душа прям радуется, а то смотришь тупое сверло, масло льют чтобы не свистело... красавчик👍

[@buddybros2557]

This is by far one of the best bevel jigs I've ever seen. Definitely going to make it!

[@GetUrPhil]

Do you have plans with dimensions? I really like this style of jig.

[@jjforeal2]

Pretty badass. I might steal this. I’ll probably build in the clamp, and countersink the hinges also.

[@sergeiivanov7482]

This is the best I've seen on KZbin. Thanks man for you masterpiece!!!

[@bravofoxable]

Very good idea, also nice that it is aliminium. Very clean and uncluttered, easy to handle. Very nice work

[@59chris1]

Nice work sir 👍

[@deaveedis6295]

Will wood be a suitable replacement? I don't exactly have scraps metal lying around

[@anthonyortegon229]

Add instructions and specific materials in the narrative. Great video!

[@onixsas]

Nice design of the bevel holder. I LIKE IT. What belt grinder you are using ? I mean is it home made or bought from the store ?

[@LockNLoad777]

You never cease to amaze me with your great ideas! You a big help to beginners.

[@11shoksmuzik]

best so far! nice job

[@aries6776]

Excellent. Simple but elegant design.

[@rodhardman5237]

That's a real nice job , what type of bandsaw are you using if you don't mind me asking

[@bocheef]

Simple and effective, well done man that’s awesome

[@luisstanker1491]

Very good Idea. Simple style , easy to make , nice look , perfekt Funktion. THANKS FOR THAT VIDEO.

[@leonciogonzalez7691]

Thanks foto they vídeo. Great idea.... Grettings from Puebla México!!!!!

[@ChristopherSalisburySalz]

Great design! Thanks for sharing!

[@MORIDEUT]

The very best one I have seen!

[@bryanmitiner6863]

Nice job! Well thought out.

[@ringaleavo]

Well done, excellent job

[@stanislavsivashov3111]

Thanks! Very good work! Can you tell all sizes of this beautiful product?

[@foxfam8939]

You have opened my eyes! Great video! You did good work! Do you think I could have your specs so I could create my own?

[@TheLois93]

What a great job! I would like to be able to replicate it. By any chance would you have a plan with the measurements and distances of the set or could you provide me with them? From already thank you very much. Greetings from Argentina!.

[@billfleming6880]

How about showing switching sides??

[@alanbenton1678]

Why did you bevel the screw holes for the hinge screws?

[@darkdragon1054]

....интересный и доведенный до ума вариант,спасибо за видео...

[@mdbazir4472]

Awesome nice creation

[@matthewhegstrom8478]

Looks good, I’m going to give it a try. What kind of sander do you have?

[@survivalist9818]

You have endless skills.

[@johnklein4558]

Very nice work! Great job!

[@geraldstamour1312]

Hella dope, AVmake!

[@ershvv7567]

плавной регулировки изменения угла нет!а это уменьшает свободу действий на приспособе!!! обязательно делайте с винтом и контр гайкой!!! за изделие и работу ,респект!!!

[@earlelzy7243]

It seems like making the jig was just as much fun as making the knife.

[@matthassin9943]

I love your videos and everything you make. Please don’t stop making the awesome videos. How much would you want for one? I’d totally buy one.

[@AVmake]

Thank you very much! I don't plan on selling these,at least for now.

[@matthassin9943]

AVmake I totally understand. If you change your mind, please let me know.

[@albertledesma5173]

AVmake I’d buy one too!

[@starsky2729]

Thank you for sharing valuable vdo.Small job ,But great benefit. 💖💖💖👍👍👍💖💖

[@ronnewton606]

very nice, i use a similar jig but yours is much nicer... thanks

[@Freizeitflugsphaere]

Great! I made all of this just using a file. Still turned out great.

[@paulmendolia8483]

Fantastic Neat work.

[@albertowagner750]

Ahora sí! El primer fresado de valió de nada.

[@garylantinen2819]

Great design I would affix a hard nylon pad to the base and countersink the screws

[@videosvarios7272]

Un buen trabajo felicitaciones 👍

[@christopherreedy3543]

This was a good video, but if you could make a set of instructions with sizes and ect... it would be perfect.

[@ravanabrahmarakshas4263]

Christopher Reedy that is a fancy jig. it is ferrari of jigs. all you need is a L shape and two nuts and bolts on one side to set the angel. this was very nice but i never spend time to make this. L shape and two bolts will do.

[@007Jaredboy]

@@ravanabrahmarakshas4263 The amount of time and effort you put into projects will be reflected in the quality of your knives.

[@stardust6385]

I think 100x250mm is a good measure for one plate

[@jovanperic4214]

Great video. Thank you for sharing with us. Can you create video or post drawings for this jig. Thank you

[@raleheponakki6962]

How long and wide is that aluminum plate???

[@h3d.creaciones]

Hola. Que espesor de aluminio utilizas? Y que dimensiones tiene aprox? Exelente terminaciones. Muy buen trabajo.

[@trainwon5699]

Awesome job thanks

[@chrismccluren6655]

That sure is a nice jig

[@ericmoore2236]

Nice👍

[@dr.seppjausen9778]

Wish I watched this earlier, would made the build of mine less try and error ...but in the end it looks very similar to urs.....I just added a horizontal screw to adjust the bevel more reproductable.... Ur using cubitron 2 grinding belt? I love this belt, grinds so well and makes such an beautiful grindig Face..

[@КошмарКошмар-й2б]

Hi bro 👋👋👋good project and good idea 👍👍👍👍

[@AVmake]

Thank you!

[@FaskaRestoration]

Oh hello, I see you like knives too :D. What a coincidence. XD Do you remember me?

[@trabbipaul]

Simpel,easy and supercool. A little bit Alu,some screws a little bit Time wow. Grind perfect Knives Top Work.

[@williamcarey6592]

Make it out of steel and weld it, last longer and will not take very long to make.

[@roby71sl]

Odličan Jig. Gdje si kupio aluminijum?

[@AVmake]

Imao sam ove plocice od prije, ne znam gdje se moze kupiti na manje komade...

[@mordur2739]

Would you kindly tell me more about a thickness and size of aluminium pieces?

[@mrgooddeeds3115]

When does the kit come out for sale?

[@RustyGunn7]

Yes, sell these, AV. I want one.

[@saarlandschmiede]

Wo hastn die Aluplatten gekauft?

[@ХОББИКОП-с3с]

Неплохо получилось 👏🤝👍!

[@regishollet-marchal7806]

Bonsoir ! WAAAOOUUU ! PERFECT very good job for knyfes !

[@razmah]

how many mm aluminum?

[@joselinoferraez8340]

iI enjoy your video, i definitly will try to do this artefact.

[@Nosoynadie877]

Podias haber ideado algo para sujetar el cuchillo,un par de imanes? Para q no se mueba y no edtorbe la prensilla?

[@leo9021]

Aluminium?

[@markhall912]

Hell yeah good job

[@bobuk5722]

Just a suggestion, show how it's used first, not last. Merry Christmas! BobUK

[@juliohutnik4785]

Muy buen trabajo !!!

[@blacksteel2434]

You need a table for that bandsaw

[@tazo1jd]

would you share your plan ?

[@slathrop]

Could you please Provide dimensions on everything? I definitely want to make one of these for my knife making.

[@espjason]

Do you have one on a file guide too. Please could you do plans for this bevel jig I’m happy to pay for them

[@shultz550]

Excellent piece of work.. great job.. but the instructions are lacking. Measurements,aluminum sizes and distance for holes drilled. A good fab guy can figure it iut but novice knife makers with little fab skills would have trouble

[@peterpanatos5488]

Do you sell these ?

[@152lb.mousehole2]

Nice jig...

[@JF_Projects]

Great video, thanks for sharing. Nice jig also...

[@pikeevans8559]

Seeing as how that was aluminum plate you were tapping.....you could have put your tap in the drill and run it on slow speed. I have done it plenty of times.

[@zlatkodervisic9727]

Prelijepo. pravis svoj licni pomocni alat. Cestitke...

[@AVmake]

Hvala! Snađi se druze hahah

[@IvZCom]

Всё гениальное, просто. Спасибо.

[@FoxRunForge]

Thanks for the demonstration

[@ylknifes2336]

Very nice :) when you sink a hole lower your speed for nicer surfaces and less sound

[@parvizzargari9183]

Perfect job

[@TURBOTHETANK23]

Thats cool !