How to make cell phone signal amplifier From USB at home || Antenna booster

Hello , I hope you will support us . In this video, we teach you how to make a antenna booster with the highest efficiency. This antenna is made by an amplifier. You can use this amplifier to strengthen your mobile antenna Follow us on Innovation plus one channel
________________________________________
Please subscribe us : www.youtube.co...
________________________________________
Required electronic components:
Old led bulb
IC LM741
Capacitor 2200uF
Capacitor 1000uF
Capacitor 10uF
Resistor 4.7K
Diy cell phone signal amplifier
mobile signal booster homemade
How to make 4G Speed Booster Antenna
How to make 5G Speed Booster Antenna
Mobile antenna amplifier
Cell phone signal booster
Mobile antenna booster
Antenna TV booster
How to make Antenna TV booster
#Antenna #booster #mobile

[@himanshupandey1809]

Amazing,i've been looking for a signalbooster for long

[@InnovationPlusOne]

Thank you for watching the video and comment my friend🙏❤

[@voiceofholybethel7920]

​@@acousticsound7vc v

[@dumitrudurlea9246]

Idiot

[@ferreollbandolo2247]

This is a great and simple Hack for the best antenna booster. Thanks so much

[@InnovationPlusOne]

Glad you like it!

[@InnovationPlusOne]

Glad you like it!

[@devsoni19]

The LM741 integrated circuit (IC) is not suitable for amplifying high-frequency signals like 2500 MHz. The LM741 is a general-purpose operational amplifier that is typically used for audio-frequency applications. For amplifying signals in the MHz range, you would typically need a specialized high-frequency amplifier designed for those frequencies. Amplifiers suitable for RF or microwave frequencies like 2500 MHz are specifically designed for high-frequency applications to ensure accurate signal amplification without distortion or loss of signal quality.

[@InnovationPlusOne]

Thank you for your information

[@joebertevangelista1933]

What could be the best replacement?

[@joebertevangelista1933]

i will try to make one of these here in Philippines.

[@InnovationPlusOne]

@@joebertevangelista1933 Sure my friend

[@monojsarma6619]

Sir I make this it worked

[@InnovationPlusOne]

Thank you for watching the video❤

[@RIANRBRCHANNEL]

Hi friend thank you for sharing great vidio good luck friend

[@InnovationPlusOne]

Thank you, welcome to Innovation plus one channel my friend

[@lipeeno]

Good morning, Thank you for the effort you put into the video. Its clear and consise. And thats where my problem is i build the absolute replica of it including the brown sheath on the cable (thats a bit confusing actually) i've tried both YAGI and ground plane as an input and output aerial but to no avail. Literally zero. I am in the UK . Should i use different transistor(amplifier)? I think our range is both 800 and 2600mhz

[@InnovationPlusOne]

Glad it helped, I will definitely design a new circuit for this frequency, my friend

[@frequencywatchers]

Raange Is Mhz And Ghz For You? You Meant bandwith? Eather Way You Are Talking Just Trash. Jesus, These Commenters Who Have NOT A SINGLE CLUE WHATTHEY ARE TALKINGA BOUT!

[@jonnyfatboy7563]

will this kill me? Great editing btw👍

[@InnovationPlusOne]

Did you like this antenna?

[@beche1838]

It's great, who should I do all this? Will the phone technician do it? thanks

[@InnovationPlusOne]

You must watch this video carefully to build this amplifier

[@beche1838]

@@InnovationPlusOne You look carefully, but I personally couldn't do it, a phone technician will probably do it, I don't know.

[@InnovationPlusOne]

@@beche1838 I'm sorry I couldn't help you my friend

[@beche1838]

@@InnovationPlusOne It is clear, I will show it to the craftsman, if he does it, thank you

[@zeynabkhodaprst7186]

You have very interesting ideas👏

[@InnovationPlusOne]

Thank you! 😊

[@ylajodiste1]

and so fake

[@InnovationPlusOne]

@@ylajodiste1 My friend, instead of judging quickly, make this antenna first, you will definitely like this idea

[@mrinmoybaruah1620]

I made it but when I switched on my ic is heating plz help me out of this problem...

[@byAbhishek]

use heatsink... online buy

[@InnovationPlusOne]

Which IC did you use?

[@mrinmoybaruah1620]

Lm386

[@mustafaaktas33]

First of all, thank you for your efforts. I think this system you are using is for terrestrial broadcasts. Do you have any work compatible with satellite devices?

[@InnovationPlusOne]

Thanks my friend for watching this video, I will upload a new video on this topic soon❤

[@n.vigneshv.c3984]

bro will it help in strengthen 4g mobile data flow in 4g smart phone ?bcoz currently in my location though 40 GB data in 4G smart phone data is not picking up. will this circuit solve this issue ?

[@InnovationPlusOne]

This amplifier can only be used for voice calls, my friend❤🙏

[@SolLuna-ik4kx]

Excelente proyecto, muchas gracias.

[@InnovationPlusOne]

muchas gracias querido amigo❤🙏

[@frequencywatchers]

i hate how everybody cuts the soldering aprta nd it looks like iots magic, NO, soldering is not something that you touch and it perfectly solders it to the metal without any problems especially with this nasty soldering iron tip. you need to hold it there for a second so it can be secured by the solder itself and i would never solder copper to copper with solder and not knowing if the copper on copper contact exists, it 100% Needs To Ecist becauseif not, your sodler will act as a resistor wich will make antenna tranceivings wrong, it needs to be copper to copper and then you can introduce the solder itself, i useally smash the copper flat a lil bit so i know that tthe copper is superclose to the materiaal im soldering it. thisis a good tip for you all, le me tell you, i solder for 26 years now and i know what im talking about,.

[@InnovationPlusOne]

Thank you for your explanation about soldering❤🙏

[@user-zx7hn3ph2m]

Amazing

[@InnovationPlusOne]

Thank you! Cheers!❤

[@shaftarkhan4523]

Any video for both audio video signal bosster in room

[@InnovationPlusOne]

This amplifier can be useful for voice calls for GSM band

[@TheGhostGuitars]

Thank ye, I live in an area with poor cell reception. Ironically that's despite of being surrounded by 4 transciever stations all within half mile to a mile of my location. Unfortunately they all are blocked from direct LOS (Line Of Sight) view of my home by the topography of the valley walls and surrounding series of mid-valley ridges. My cell carrier wanted me to buy an expensive cell booster on a subscription basis. After seeing this video, F that! One final question, am I correct in ASSuming that this will work not only with 3/4G LTE but also 5G too? EDIT: OK, I just read the description, it APPEARS that this booster will work with 5G. …I think.

[@InnovationPlusOne]

My friend, this amplifier is only used when necessary, just to make a voice call, if you want to have 5G, you must use strong and shared amplifiers.

[@MukinZaman]

Sir how much volt the adapter should be ???

[@InnovationPlusOne]

You can use 6 to 9 volt adapters

[@pritambhowmick1090]

What is the voltage of this all capasitor?

[@InnovationPlusOne]

You can use capacitors with a voltage of 50 volts

[@pritambhowmick1090]

@@InnovationPlusOne and what is the watt of resistance 4.7k?

[@badmash_chhora_official_7947]

Kya baat hai bhai

[@InnovationPlusOne]

I have good news, very interesting ideas❤🙏

[@allbdtips6064]

Nice

[@InnovationPlusOne]

Thanks

[@spshivram]

will this signal amplifier work with GPS tracker ? which will have IoT/M2M SIM card ?

[@InnovationPlusOne]

Thank you my friend for watching the video❤ No, GSM

[@itz_ashish_official_01]

Will it encourage the internet speed ? Replyy me sir

[@InnovationPlusOne]

This mobile signal booster can only be effective for improving voice calls my friend

[@splash_impact885]

Can you provide electronic components links please

[@InnovationPlusOne]

Ok my friend💚

[@Mellow-Tkd]

Any alternative of 4.3k registor its difficult to get where im living 😢

[@InnovationPlusOne]

🙏❤

[@sciencemansandera]

I don’t know if it works I presume it does because you made this video but I just wanted to say really cool job on the video. I love the way you animated and everything. Oh what editing program did you do that with that photo shop and Adobe tools or the one from Apple I can’t remember the name of it right now lol

[@InnovationPlusOne]

Thank you my friend for watching the video and supporting me❤

[@petterkonol9020]

@@InnovationPlusOne that's real? Or fake?

[@ylajodiste1]

fake

[@MaxTheGamer001]

It's real cuz metals such as aluminium and copper reflect wifi and cellphone signals, so everything you need to do is just position it correctly

[@heisibm4713]

Thank you for the amazing video. My questions are; What is antenna’s capacity in terms of range? Also how many devices can it accommodate?

[@InnovationPlusOne]

Thank you my friend for asking this question. This antenna can receive medium density signals easily and will support only one TV❤

[@assoseijunior]

I copied your project but in reality it doesn't work. The signal has no improvement.

[@InnovationPlusOne]

What is the working bandwidth of the telecommunication center where you live, my friend?

[@GIGI-dp2ux]

I have two questions: 1) Does it really work? (It doesn't matter which phone network Im user of, for example beeline/Cellfie right?). 2) Is it legal? (If I did something wrong, will they bother me because of unauthorized interference or fault in the telephone network?)

[@InnovationPlusOne]

This amplifier is not very strong, so it does not cause interference in telecommunications

[@stevianusnukak15]

Where can i buy it?

[@InnovationPlusOne]

You can easily make this amplifier at home by watching this video and save money❤❤

[@AsadKhan-fn9tp]

Sir can you help me ... I need little stronger booster then that ....any link etc plz plz

[@InnovationPlusOne]

Hello my friend. You may run into trouble with your country's telecommunication laws to build a stronger amplifier

[@AsadKhan-fn9tp]

@@InnovationPlusOne Thank you so much for your response.. In my country that won't be a problem...even companies mad boosters are available but they r very expensive..and I m not that rich ....so if you could help me ..I would be thankful beyond words ...stay blessed sir❤

[@InnovationPlusOne]

@@AsadKhan-fn9tp Please my friend,Yes Sure

[@arduinomaquinas]

Very good work's, ❤ awesome video👏👏👏 @arduinomaquinas thank you bro🇧🇷😉👍 subscribed

[@InnovationPlusOne]

Thanks for the sub!❤

[@lsdlsdk4845]

Capitors voltage not mentioned, kindly mention the required voltage of the 3 capacitors.

[@InnovationPlusOne]

Voltages of 150 volts can be used

[@anarghya.a9349]

Which terminal of the capacitors should be connected to which side?? Can you please tell for each capacitor?? 2:09

[@InnovationPlusOne]

My friend, the polarity of the capacitors is clear in the video

[@dhrisyavb8160]

Can you please explain the principle behind this

[@InnovationPlusOne]

this amplifier only amplifies voice calls

[@citytravels5536]

Sir how it works Can you please explain if you have no issues

[@InnovationPlusOne]

Yes, I will definitely explain in a video

[@citytravels5536]

But sir I have made it but not working

[@InnovationPlusOne]

How many miles is the nearest BTS to you?

[@citytravels5536]

Sir hmare home me inside 2 ya 3 network singnal aata hai, or jata hai Fix nhi hai Tower 🗼 distance aprx 1 km

[@InnovationPlusOne]

@@citytravels5536 Is the GSM 2G network in your country on the 900 MHz or 450 MHz band?

[@vahidboostani3353]

سلام .. برای من که در ایران زندگی میکنم ..و آنتن ضعیفی داریم ..و در بیابان ها کار می کنم .. آیا سیستم تقویتی برای دریافت شبکه های مخابراتی یا وای فای محلی .پیشنهاد دارید که بتوانم درست کنم ..ممنون میشم که پاسخ دهید دوست عزیز ..و ممنون از کلیپ های عالی شما 🎉

[@InnovationPlusOne]

Soon I will make a strong amplifier for mobile antennas, my friend

[@mazharulislam6231]

really is working as a mobile network signal booster?

[@InnovationPlusOne]

With this mobile booster antenna, you can only increase the GSM signals and be able to make calls to mobile phones in emergency situations.❤🙏

[@gakadaotak1617]

Apakah berfungsi untuk menangkap sinyal wfi?

[@InnovationPlusOne]

Thank you my friend for watching the video❤ No

[@fire9524]

Does it work as bluetooth signal booster too like for my mobile does it catch far bluetooth signals

[@InnovationPlusOne]

No, it only strengthens the mobile antenna to make voice calls

[@fire9524]

@@InnovationPlusOne oh is there any device that can boost my mobile bluetooth network like I can connect to far away devices like 60-70 meters

[@atwoezet]

Will this impact the signal for other people who are outside when we use this at home???

[@InnovationPlusOne]

No, this amplifier has little power

[@progressisimminentjasbir8564]

I m very lazy didn’t try. But have made any effort to build some thing to boost 5 g signal

[@InnovationPlusOne]

You can easily learn how to make this mobile antenna amplifier by watching this video

[@The_Ascension]

Where would you put the LED in the circuit? Would you put it in between pin two and and 4.7 K resistor on the LM741? Would you put it between pin three and the 4.7 K resistor? I’ll breadboard this and see how it operates. I’ll be curious to know if it works for me. If it does, I’ll post back with a link to my KZbin channel video on the circuit.

[@InnovationPlusOne]

I will definitely write down all the explanations in the description

[@AmitSingh-fb9ou]

Did you tried? It works?😊

[@The_Ascension]

@@AmitSingh-fb9ou It did not work. Supposedly LM741 shouldn't work for frequencies that high. Is their a new schematic up?

[@AmitSingh-fb9ou]

@@The_Ascension his video is fake probably, i checked out his other videos, most of them are crap

[@The_Ascension]

@@AmitSingh-fb9ou I replicated the circuit but no success. I never got a reply back on the questions I asked. I did find that the best way to go about this is to design your own antenna for the frequency needing amplifications. Their are may ways to go about this and it can be done, but the mosfet stated is out of spec from 800MHz to GHz levels. Also, The antenna has to be built either specifically for that signal or do a one size fits all. Yagi comes to mind.

[@tvstreamingservicesmaracay]

Greetings. This works with 4G band 4 , frecuency (1700/2100) mhz ?

[@InnovationPlusOne]

My friend, this amplifier includes a lower frequency and can only be effective for voice calls

[@RaineCarlEzekiel]

Sir can you explain why did you put a capacitor on pin1 and 8, but pin8 doesn't have a connection 😅

[@InnovationPlusOne]

We use pins 1 and 8 to turn on the IC

[@RaineCarlEzekiel]

Ohh

[@RaineCarlEzekiel]

I have one more question Why did you connect the pin2 and pin4

[@charithanuwan7004]

Hi, I try this one, easy to find parts, Not much of signal change(like 1bar).Check every component before soled.Did i do some thing wrong..When i put modem close to this it net speed goes down. for 2g signal not that effect. Did any one else try this one.thank you buddy.

[@InnovationPlusOne]

Thank you for watching the mobile signal booster, my friend, this idea can help improve the quality of voice calls❤🙏

[@user-us2ep1oq6u]

Wow.. interesting antenna

[@InnovationPlusOne]

It sure is

[@rubbitiwari1262]

Can this work for 5G as well?

[@InnovationPlusOne]

This booster is for improving voice calls my friend

[@IslamicAuliyaLife]

Bro, please make a booster video for 5G or 4G, we will benefit a lot, thank you

[@InnovationPlusOne]

Thank you for your suggestion, I will definitely upload this video❤❤

[@SB-hd5hu]

Hey man, nice video! I just wanted to ask if you did research about this which I'm sure you did. Can you provide the link to the sites you used. I'm just asking casually

[@InnovationPlusOne]

Thank you my friend for watching the video. Yes, I will write all the information in the description ❤🙏

[@Benbou969]

This device can't work properly cose OA LM741 has max bandwidth 1,5Mhz, but supposed work frequency is 900Mhz.))) It's a bullshit like all other stuff of this moron.

[@paintwithcockatiel9271]

wooooooow how do you can do it? I need more guidance ........... come on ...........

[@InnovationPlusOne]

You can easily make it using the parts you need

[@RaviKumar-jv6yc]

Does it work with bsnl 3g ?

[@InnovationPlusOne]

This amplifier can only be used for voice calls, my friend

[@jhonearltabajonda223]

Hello can i ask if is it okay to use 3 10uf capacitor if it is powered by phone? haha i dont know this kind of stuff hihi

[@InnovationPlusOne]

Hello. no my friend🙏❤

[@-patochini2306]

Hey I can use this for 4G?

[@InnovationPlusOne]

Hello my friend, this idea can only be used for voice calls when necessary❤🙏

[@gakadaotak1617]

Suport Wfi?

[@InnovationPlusOne]

Thank you my friend for watching the video❤ No

[@yagyatrips8903]

I am not tech person, any similar product available online ? Only 1 signal bar or sometime that also not available, fraud people also cheated me in the name of single booster i am in deep trouble with network issues. Please help me brother.

[@InnovationPlusOne]

In which region and country do you live?

[@rockgamerz201]

Can it increases speed of internet

[@InnovationPlusOne]

No, this amplifier can only improve voice calls🙏❤

[@pradeepgowda4910]

In my area the problem is network coverage for internet while no problem for calls. I receive 4g network data at speed of 200 kbps but in 5g sometimes internet disconnects and i have to toggle flight mode or wait for sometime to get back the internet. So i need the stable internet. What you suggest should i try this. 1. If yes this will stable internet connection. 2. There are any effect of this.? 3. Can i use ua741 instead of this ic.? Here is my device network status 4g-- "-115 dbm 25asu" 5g-- "-106 dbm 36asu"

[@InnovationPlusOne]

This mobile booster is for improving voice calls my friend

[@pradeepgowda4910]

​@@InnovationPlusOnethanks for the reply. Do you have any suggestions to improve internet connectivity and i think the reason for the slow or lack of internet is because of poor signal strength, how can i boost it

[@mhyerkhie4112]

Could it be used in a mountain area?

[@InnovationPlusOne]

Of course, you must have a certain distance from the transmitters

[@user-oi6te1dh3s]

is it work for full 4g internet network in any mobile operator network ? like bangladeshi mobile network

[@InnovationPlusOne]

This mobile booster is for improving voice calls my friend

[@randomacts1895]

Broo will it work for 5g and how shall i increase the distance of the antena.

[@InnovationPlusOne]

Thanks for watching the video my friend❤ This idea will only be effective for making voice calls, soon I will make videos for 5G as well

[@hajmeerkaja8020]

Bro, what is the component - brown colour component which you used to connect near 1000 microfarad capacitor bro.

[@InnovationPlusOne]

I don't understand, which piece do you mean?

[@weekendwrench]

is there any way to purchase one already built and ready to plug in?

[@InnovationPlusOne]

My friend, there is no need at all, you can easily make this mobile antenna amplifier at the lowest cost by watching this video

[@weekendwrench]

@@InnovationPlusOne I understand but I don't have the tools or parts I'll tell u what send me a link I will buy it from u if u build it and I will pay shipping

[@matheussilva-ow3bv]

great video! Could you tell me how to test if it's working using an app?

[@InnovationPlusOne]

Thank you for watching the video my friend❤ No need for an app

[@anuj.3kumar]

Which wire is this where can i buy it ?

[@InnovationPlusOne]

You can use lacquered wires or coaxial cable

[@SanderBoff]

3g/4g booster please

[@InnovationPlusOne]

Thank you for watching the video and commenting my friend❤ More for 3G network and voice calls, it can be effective in 450 MHz band

[@ernstoud]

Had a good laugh. An LM741 amplifying a 900Mhz. signal. No way.

[@InnovationPlusOne]

Thank you for watching the video and commenting my friend🙏❤

[@sanjeetgupta581]

Will it work on 5g signals???reply??

[@InnovationPlusOne]

It can help you to some extent for voice data, but it cannot be very effective for the Internet

[@arefinanwar9174]

Bro, does this really work?

[@InnovationPlusOne]

😏

[@Pandawa377]

apakah di indonesia work

[@InnovationPlusOne]

In most places, it depends on the frequency range of your neighborhood and can have different efficiency

[@saurabhsoni6276]

Is this work for internet speed Can be use for boosting the data dawnload or data upload speed... Actually when I am in indore at my home than internet network is very slow so can you please tell me what should I do

[@InnovationPlusOne]

My friend, this amplifier can only work for voice calls when necessary and will not have the power to amplify 5G

[@hannug1877]

how many power sources are you providing?

[@InnovationPlusOne]

You can use a 5V charger to turn on this antenna amplifier

[@Analyst_RP]

Is it really works?? Because I'm tired of this problem in my home so please genuine answer me.

[@InnovationPlusOne]

My friend, this amplifier can only amplify voice calls and also GSM band

[@Frank-ye1ol]

How can I use a smart phone with 100ft wired external GPS anttenna to use underwater. As side form the water prooffing which I have firgured out. I am looking to float a gps anttenna on the surface and use a chart plotter on a smart phone while scuba diving to locate wrecks and reefs off shore. As you know GPS sgnial does not travel underwater so need a wired surface antenna. What do you think?

[@InnovationPlusOne]

Thank you my friend for watching the video❤ Because the risk of this work is high, it is better to buy from corporate GPS, but for more training, I will upload a new video for this idea.

[@Frank-ye1ol]

Do you have a suggestion on where to buy such a GPS antenna?@@InnovationPlusOne

[@lsdlsdk4845]

What is the copper wire swg used?

[@InnovationPlusOne]

Lacquered copper wires

[@sagnikhazra]

What mm ??

[@adityajagdale776]

Where can we get all the necessary material

[@InnovationPlusOne]

from stores

[@himanshu.9176]

What is the volt of all capacitor plz tell

[@InnovationPlusOne]

The voltage of the capacitors is written in the description

[@simplegamesclub137]

Can it amplify all kinds of network

[@InnovationPlusOne]

This amplifier will only be useful for amplifying voice calls

[@himanshu.9176]

What is the volt of 10uf capacitor

[@InnovationPlusOne]

The voltage of the capacitors is written in the description

[@pankajt10]

Plz sell it

[@user-in2yf7ce7p]

Hello friend, the circuit works for the 3g signal (900mHz) and for the 4g signal (b3_ 1800mHz) ???

[@rudyraufrauf2534]

Is it possible to access wifi too?

[@ninjawarriors2838]

Can it catch WIFI signal from afar?

[@InnovationPlusOne]

I will make a clip for Wi-Fi signal booster soon

[@rajeshmohite1163]

What Gauge wire is used for making this.

[@InnovationPlusOne]

We can use lacquered wires

[@rajeshmohite1163]

Hello, How many volts of capacitor should be used?? 2200uF......? 1000uF......? 10uF......? And have you used a Single wire or Different wires???

[@sseth718]

Is that circuit actually works?

[@InnovationPlusOne]

In some areas, this amplifier can strengthen voice calls and GSM bands

[@sagarnath4106]

Sir, will it works in Bangladesh?

[@InnovationPlusOne]

I don't think it will work there my friend because it has different mobile frequencies

[@muhammadaslam-mm1xi]

redy for seal u have .pl figdiagram and parts list for help me

[@InnovationPlusOne]

Yes, of course, my friend🙏🙏

[@aasadd]

Bro please tell me voltage of capacitor

[@InnovationPlusOne]

Thank you for watching the video my friend💚 2200uf 35v 1000uf 6.3v 10uf 25v

[@zyz-nn2rq]

whats it detailed principle？will you answer it plz

[@InnovationPlusOne]

Thanks for watching my friend💚 It can collect weak suspended signals and rebroadcast them by amplifying them

[@biplabdasbairagya866]

I want this device. Please sell it.

[@InnovationPlusOne]

My friend, you can easily make this amplifier at home by watching this video

[@Rassel_Rana]

I am always facing emergency network..when i turn on data only shows EDGE network,,, can this video fix my problem after applying this process?

[@InnovationPlusOne]

Thank you my friend for watching the video❤ This idea does not have much impact on the Internet and can be effective on voice calls

[@surushebadi5546]

❤

[@InnovationPlusOne]

🙏🙏

[@user-ri1lf6lx2s]

1000 km volt

[@InnovationPlusOne]

Thanks for visit

[@_MOVIE-RULZ_]

Can you tell me for very very low network signal in our Village so it will work or not

[@InnovationPlusOne]

Its quality depends on the bandwidth of the telecommunication system in your area, my friend💚

[@dinesh8951]

Can it improve calling signals only or Internet speed also

[@InnovationPlusOne]

Just call❤🙏

[@-patochini2306]

@@InnovationPlusOne If its just call onky is it possible you'll have still internet I mean dead spot having a signal will make you have signal boosted for a data sim?

[@idexterbro]

Can u say the capacitor voltage values plz...

[@InnovationPlusOne]

My friend, all information about this antenna booster is written in the description❤🙏

[@idexterbro]

ya i saw but you have mentioned only uf values of capacitors..@@InnovationPlusOne

[@vivekmistry4598]

how to incresss range?

[@InnovationPlusOne]

Increasing the range of this amplifier may have more costs that are not economical

[@sukanonton8252]

How about wifi?

[@InnovationPlusOne]

We can create better ideas to strengthen Wi-Fi, my friend

[@AadiGamingYt03]

India me kaam karega

[@InnovationPlusOne]

This amplifier is useful for high frequencies of 2600 MHz

[@Lasitha_dayarathna]

What battry type ?

[@InnovationPlusOne]

6 to 9 volt batteries can be used

[@WelsonBey-sv9bq]

Can i need

[@InnovationPlusOne]

You can make this amplifier easily

[@ArunGodzMan]

10 uf capacitor voltage please amd resistor how many wattt in amazon it shows 2 wat 1/4 wat , capacitor 1000 UF Voltage also mention

[@InnovationPlusOne]

Full information is written in the description, my friend❤

[@ArunGodzMan]

Have seen the description but it doesn't mention the voltages and wattt