Today, in a concrete products workshop, we went to a man who, with simple molds and an easy method, makes concrete pipes that are used to pass water.
Пікірлер: 34
@abdikadirabdulahikirix94849 ай бұрын
Very owesome and Advantage full video raelly
@FromEveryWheree9 ай бұрын
I'm glad you liked this video
@kayto_drone_2018 Жыл бұрын
But what tools were used to create the tools that were used to create the pipes?
@marceloquintao8490 Жыл бұрын
Vcs vendem essas formas
@FromEveryWheree Жыл бұрын
yes
@georgekuttypulickal54052 жыл бұрын
What is th ratio of cement, gravel and water
@Agustin-jo8mv Жыл бұрын
I doesn't look to precise. I think you could have to build your own mix depending on what your needs are. I'm guessing this would be suitable for rain water drainage or may need further processing.
@mehmetcam4624 Жыл бұрын
Selamlar usdam bunların boyu 1 metre eni 30 veya 40 santim varmı
@FromEveryWheree Жыл бұрын
They are produced in different dimensions. It is usually produced at a height of 80 cm
@eduardoseverichs930311 ай бұрын
Como se aclopa
@FromEveryWheree11 ай бұрын
Glad you watched our video
@thomasmcshane71996 ай бұрын
Where do I find this mould?
@FromEveryWheree6 ай бұрын
This work was produced in Iran, my friend
@thomas43154 ай бұрын
Dropping 10% lol ….. get a large flat shovel and weld the end close and cut one side round as the opening .
@FromEveryWheree4 ай бұрын
Thank you very much for your advice
@mdazizulhuqe38022 ай бұрын
আমা ফাইব লাগবে
@FromEveryWhereeАй бұрын
আপনি কি বোঝাতে চেয়েছেন?
@tihoprskalo771927 күн бұрын
@@FromEveryWheree*#fiber*
@user-vb4xk8cg3u5 ай бұрын
Magkano Po presyo Ng hulmaan Ng imbornal salamat sa sagot
@FromEveryWheree5 ай бұрын
Ang mga hulma na ito ay ginawa sa Iran. Ang kanilang presyo ay halos 3 dolyar
@rustombalean63110 ай бұрын
Location
@FromEveryWheree10 ай бұрын
iran
@jesusalvarado1149 ай бұрын
Give me the address
@jesusalvarado1149 ай бұрын
Dirección de la fábrica de pipas de cemento
@mehmetcam4624 Жыл бұрын
Teleton at
@FromEveryWheree Жыл бұрын
👍👍👍
@ronliebermann Жыл бұрын
Cement pipes are a big hassle to make and transport. Smaller clay pipes are sometimes extruded, instead of being poured into a mold. The problem with cement pipes is that they can’t be extruded, because they would collapse. There’s no internal support. So I was wondering: What if strong round internal-support frames were made out of a water-soluble material, like gelatin? So the trench would be dug, and then a cement truck with an extruder on the back-end would extrude the cement pipe directly into the trench, while workers insert the gelatin support frames? The frame would be layered with waterproof-tape all around the outside circumference, so that that it wouldn’t be affected by contact with the wet cement. After the cement cures for couple of days, water would be run through the new pipe, causing the internal gelatin support frame to dissolve. I suppose the cost of the support-frames would be one of the deciding factors. Gelatin isn’t cheap.
@FromEveryWheree Жыл бұрын
Thank you very much for your excellent explanation. Good luck
@scurvofpcp Жыл бұрын
Sand can make a pretty alright support structure. If you are so inclined.
@FromEveryWheree Жыл бұрын
@@scurvofpcp 👍👍👍👍
@marceloquintao8490 Жыл бұрын
?
@FromEveryWheree Жыл бұрын
👍👍
@village.advantures Жыл бұрын
سلام هموطن خوبی.چنتا سوال ازت داشتم تو کامنتا مناسب که بپرسم اگه ایمیل آیدی تلگرام شماره تماسس چیزی بدی باهات ارتباط بگیرم ممنون میشم
@FromEveryWheree Жыл бұрын
درود بر شما. آیدی تلگرام خودتون رو اینجا بزارید، من به شما پیام میدم و آیدیتون رو از رو کامنتا حذف می کنم