How To Make Fast Charging Station

Hello friends, In this video you will get the procedure to make a fast charging station using 12v power supply. Simple follow all the step and make your own fast charger station.
Connection diagram : easytechlearn.c...
Share, Support, Subscribe!!!
Subscribe: goo.gl/WfYhoR
KZbin: / easytechzone
Twitter: / easytechzone
Facebook: / easytechzones
Instagram: / easytechzones
Google Plus: plus.google.co...
Cover songs collected from NCS youtube channel: / nocopyrightsounds
Track: TonyZ - Road So Far [NCN Release]
Music provided by NoCopyrightNation
Watch: • TonyZ - Road So Far (I...
Stream/Download: NCN.lnk.to/Roa...
-----------

[@flothetech3526]

The way you have the USB connections are wrong. You have to put a resistant on the two data prongs to make it a fast charger for 5v. If you don't do that your phone will only charge at 350-550 milliamps and not 2 amps as most phones require at least 1.2amps to charge.

[@dyskpierwszy2881]

Do you realize that each of the sockets will charge the device with only 0.5A. No usb middle rises connected

[@hydrolisk1792]

I was thinking the same thing lol

[@kumarhiremath967]

Hi I could not understand your question? Did you mean that 0.5A for each usb is not sufficient? I do not have the answer to your question as I am a beginner and I am trying to understand your question.

[@shadowhunterxxx5891]

I knew nothing about fast charge till I watched this video👍👍

[@paulpease1788]

Well...after this video you know less. If you have more than 2 ports connected your phone wont be charged in 4x the amount it did before. 2 ports...about normal. 1 port...then it's a fast charger

[@Fuchs_Fuchs]

Im crying what is that, are you serious. You have no usb controller for fast charge 😢

[@ArtemKalyta]

Like! I collected such for myself more than a year ago on 5 ports (power supply unit 5A). Only on usb it is necessary to solder average contacts data + and data-, or to solder resistors (depending on what phone) that the charge current was 1 and more amper, instead of 500 mA as in this case as the phone considers that connected to the personal computer, not to the charging device.

[@yeltsinandrew343]

Because it needs a charging protocol charger + and - and TX and RX pins need to be connected to an charging ic if else your phone won't charge if charging it's not charging it's damaging the charge protection and charge ic in your phone which leads to replacement of an ic mostly they won't replace ic instead motherboard needed to be replaced

[@suiyen]

You are absolut Right! But, how can i make this only with 5V y 4Amperes? Do you know?

[@emilyhouse9642]

@@suiyen ebay buck boost converter , cost 10 bucks. 6-40v in --1.2-35 v out at 20 amps. 300w CC CV

[@elvermenzero8626]

How to made fast charger smart phone * first step go to accessories shop * second choose the charger wht u want use for * third step go to the casher make payment * last step there u have it Fast charging charger smartphone The end... Thank me later 😑

[@sanjibbachar2074]

Cheap alternative But the thrill of making a working project is missing

[@shurimanslegacy8729]

Shut up

[@paulstubbs7678]

What about the USB data pins - if these are left unconnected, most devices will assume it is a very low power supply and either charge at 0.5A, or refuse to charge at all. Also most double sided tape & hotmelt glue is far from secure when it comes to mains powered devices (& $1000+ phones)

[@oldblueshirtguy]

There's no way it can work properly as shown, let alone as a fast charger. At a minimum the data pins need shorting together and last time I checked glue is not a conductor 🙂 Then those buck converters are not the right tool for the job (even in the video you can see the voltages are all over the place and risk frying your device). There's also some pretty major safety fails, for example not even heat shrink covering the mains solder connections meaning one loose wire inside could kill you or your devices (the boards that get hot are held together with hot melt glue FFS which is just stupid and likely to kill someone if it's knocked and comes loose)! Seriously folks, don't try and build something like this, like that. At best it won't work properly, at worst you'll kill someone.

[@arungwdan1429]

Advance Rip in your mobile 😂😂😂😂

[@jgq5]

welcome to the smoking phone. Rest In Peace phone

[@shostakovichable]

ㅋㅋ'ㅋㅋㅋ

[@Ravi_Sachchade]

Nice video but instead of music if u will explain the parts, where to join and from where to buy, your video will be more interesting..

[@dtwistrewind7361]

A fast charger can alternate voltage from 5-9v when the device informs it, and it detects it through the data pins on the usb. Your device is incapable of that even if you used the correct quick charge cable, as the voltage is bucked to 5v only. But still nice try and well recorded.

[@heavenplus1]

Yes you have pointed out this flaw correctly.

[@ncmphotography]

Good project 👍😊 Now realy need this one Next day 😊 iam going to make one👍👍✌️thanks bro

[@easytechzones]

Ok

[@dkreativechannel7064]

kzbin.info/www/bejne/jqHboHmhgcysZq8

[@Schjoenz]

@@easytechzones he commented something great an you just replied OK??? THAT IS RUDE!

[@suhaibhabib1586]

@@easytechzones bhai Jan ye Sara saman khn se milega

[@suhaibhabib1586]

@@easytechzones plz guide me

[@bhoopathis9660]

This is not fast charging 🤔🤔. The phone will never recognise this unit as charger, since the data pins of USB aren't connected properly. This system behaves like very slow charger. It's useful only for non standardized applications like project powering etc

[@SUMANSHARMA-dg2ks]

You are right bro I am thinking that thing Nice work bro without data pin any phone couldn't take aftre from 10 watt And also his voltage and current is not stable And also buck converter is lass less efficient than any fast changer

[@SUMANSHARMA-dg2ks]

He has 6 out put every out give around 7 to 8 watt because of loss in buck converter And also his computer power brick / main power supply give 12v at 5 amp = 60 watt at maximum so every usb get 10 watt So this is a power supply which have 6 usb ports and give around 9 ~ 8 watt in every socket Sorry for the creator but you make a power supply to a useless thing

[@bgahn5808]

I agree with you.The buck converter has no charging function, so it's not fast charger. It's only the 5V adapter.

[@allasayegh1411]

it's an advice for everyone, I'm actually using a 3A buck converter from 9V old classic style transformer to staple 5V DC and but i use a car double usb female heads only because its has resistors between data pins it's fast and efficient but not 40W

[@mixme8655]

Thank you for honest comment I like it much I am a beginner and learning from you . ang I also learned from other comments

[@sammy2888]

I am a long time subscriber of all your projects , super friend tks

[@dkreativechannel7064]

kzbin.info/www/bejne/jqHboHmhgcysZq8

[@manaharlotia7233]

Excellent Demonstration.Good for making school projects also.

[@dkreativechannel7064]

kzbin.info/www/bejne/jqHboHmhgcysZq8

[@oryodad2379]

You should replace the two resistors next to Tl431 in the 12 v dc charger instead of using buck converter , this will give you more amper

[@abuahmed489]

Would the charger be rapid? After replacing resisters. Are there already resisters after TI431?

[@emilyhouse9642]

He's wrong use the buck converters there capable of 4 amps I believe

[@oryodad2379]

@@emilyhouse9642 how can buck converter give more Amper more than 12v charger although 12v charger is powering buck converter

[@fadhila_official3810]

welcome RIP your phone...😂

[@shurimanslegacy8729]

Shut up

[@loveispaining3934]

best of luck my dear bro in youtube you have great idea

[@easytechzones]

Thankyou 🙏

[@dkreativechannel7064]

kzbin.info/www/bejne/jqHboHmhgcysZq8

[@wilsoncreative1106]

He is big fan of Pvc box

[@easytechzones]

Yes. Easily available

[@ncmphotography]

@@easytechzones yes

[@hmb.1224]

Of course

[@imth3onelsi]

@@easytechzones 😂yeah

[@freecinemamovies5411]

Thanks Brother

[@easytechzones]

Welcome 😊

[@kabirajabdulmalek7869]

Q

[@TerrororizedCow]

U

[@Avinashkumar-jt4yi]

@@easytechzones *Brother ye table kaha se purchase kiye ho* *please btao please* 🙏🏻😟

[@subhadravasave3850]

Instead of wasting power and money on 12v 5amp smps , perchase a 5v 10-12 amp smps and use it... And don't forget to short data pins in the usb sockets...👍😀 Using a 12v supply and then converting it in to a 5v supply is not a good idea...🤔

[@sarservices]

Rip phone charging IC Dont try this !

[@robbywijayanto9019]

RIP Powerbank module I charge With Ic7805 (5v regulated)

[@mr.electronicsdevicevlog9333]

There are chip that can communicate between the charger and the phone. All cable must connected. 2 more at the centre need to connected to the chip for data. negative and positive connected juat 2 wire can't do fast chargerging This is misleading.

[@theevidenttruth.5361]

Very neat, bro. Nice work 👍

[@haribabug3144]

Your so genious brother

[@JakeJoris]

without shorting usb data pins you wouldn't get faster charging speeds than 0.3A.

[@sat_talk]

Thanks Bro.. but which of the DC-DC buck converter you used ? also pl. make a video on making quick charger 3.0 using IP5328P Dual USB ( with type-c ) module...please

[@nasibullah9632]

Sir your work is very good but one problem ,600 mah is not write for mobile for mobile maximum amps 1 amps

[@kolkatafreefirelover9262]

WOW VERY VERY GOOD WORK😇😇😇

[@relaxingsoundschannel108]

No d+ d- line, no fast charging.

[@NanoCreator]

this is fast charging project!!! kzbin.info/www/bejne/qKGzaqSIl6mNqrs

[@pronehacker9915]

When i watch this vid my mind GOOS LIKE WHAT?😂 And connect the main to a buck/boost dc voltage converter with no protection board like what the hell man trying to born someones phone hahaha. I suggest u make a vid making a powerbank not thinga like this. But this is not a hate comment.

[@Starduster2000]

Nice Project but the Shell for your fast charger It's a little Bit ugly. My main question is can i use all 6 USB charging plugs at the same time with wich Ampere?

[@easytechzones]

Not possible

[@kumarhiremath967]

@@easytechzones Can you explain why is not possible to use all the USB at a time?

[@vaibhavk008]

If you love your mobile phone than never try this. If you want to check how mobile phone blasting than try it

[@HarpreetSingh-nl1li]

Nice one

[@feryyunianto8283]

This is not for smartphones, but for old school phones, hahaha

[@netrapatil2169]

It's gonna be more expensive bro.. Those buck module would be 80rs each and. Power supply cost more than 500rs...nearly a 15 to 16doller project.. I have done this type off project to charge my phone but the ice gets ridiculously hot. glad that they have small heatsink.. Cool. Project

[@raivlogs2253]

Bro you super 👍👍👍

[@easytechzones]

Thankyou

[@sayemmahmud9588]

Nice Fast Charging Station...

[@easytechzones]

Thankyou 🙏

[@sayemmahmud9588]

@@easytechzones Welcome sir

[@HarpreetSingh-nl1li]

How u can say that it's fast 🔋⚡

[@powerelevators7139]

Super bro

[@paulpease1788]

It's hardly fast if you consider how many ports there are. Why do people do this lying thing all the time?

[@A2zos9]

i dont recommend .. this type of charging process harm your mobile phone . it will affect your battery .. because no " emi filter , no dc output filter , no protection , no high current logic level MOSFETs , no input AC filter , cheap output rectifiers diod , 5 volt output need solid state capacitor 5.5 to 6.3 volt 470 to 600mfd ... it will harm your phone .. smart phone charger chopper transformer is very high quality and a small transformer can handles very high current 2 to 3 amps .....

[@stevebabiak6997]

The power supply connected to the AC mains probably has some of those features. But I would still suggest he put a fuse holder and fuse on the AC side as a minimum for safety.

[@user-fc5rx4mv5q]

good

[@ar.technical9110]

Sir please give link👇🏿 of product that you are using in video and next feucher video with MPR other wils great video and your's mind👌🏻🎆😄😃

[@Schjoenz]

Giving out 600mAh is NOT A FAST CHARGING. it should at the very least give out 3,000mAh to consider a fast charger. This just a regular charging station that will take you almost forever to charge your 4000mAh phone. Plus, your circuit doesn't have any protection board. And not to mention that the USB ports you used are just USB Type A ports. A fast charger is using USB 3.0 ports with 5 PINS. Yes, 5 PINS. SO STOP CALLING IT A FAST CHARGER. Peace!!

[@i.3484]

Good

[@omkarselectronicworld7823]

Best video sir...👍

[@mr.m3843]

وحيش

[@abdulwahid8579]

Great job with all the best information

[@a14bionic19]

Buying 3 fast chargers for 15$ and distributor with multi ports would be much efficient!

[@agustinantunez598]

hi... can you connect all the usb and don't lose amperage? that is, if I connect several cell phones, does it not lose output voltage?

[@stevetobias4890]

Don't try it, you will stuff up your phone's charging IC

[@arnoldbencz6886]

Super! Sorry for a my bad english, but why did you used 2 different modules to a 5,2V charging?

[@hamidurrahmanrajib5892]

What a project!!

[@md.smd.s1019]

Bhai video me music mat daliye bol ke bataea apne kya lagaya kitne amr ka laga hai XL 4015 behter rahega aur samaj me aye nice video

[@easytechzones]

Ok. I will try

[@katokirizesitomumusunbires1259]

Thanks you my teacher docta

[@NasehatMotivasi]

Thank's 4 u're knowlage 👍👍👍

[@manaharlotia7233]

Excellent presentation.thanks

[@rfpixel]

Great Work! love it!

[@easytechzones]

Thankyou

[@hennajezop8396]

@@easytechzones wkskjsj

[@hennajezop8396]

👍djddj to get a good morning ma'am please see the attached screenshot for the prayers

[@stevetobias4890]

That's not technically a fast charging box. A typical fast changing USB will initially deliver 5v then speak to the device and then deliver up to 12v. My Samsung initially gets 5v then increases the charging voltage to 9v at around 1.4 to 1.7 amps. Also a true multiple port USB fast charging station would need one module per port. It's a good concept but would have been good to see the total current delivered with 4 to 6 devices charging.

[@ALOKKUMAR-hf5gk]

I need this. Charging station

[@henrikhansen1023]

@EASY TECH 2:25 5 amps?? OK, then you can charge up to 2 units simultaniously 🤣🤣🤣

[@comrade4330]

supper i am try to this projict

[@easytechzones]

Use 12v 10amp smps

[@comrade4330]

ok

[@AyanThecrazykiller]

Diwali me changer with rgb light video banayenge please🙏🙏🙏🙏🙏🙏🙏

[@easytechzones]

Ok 😊

[@Avinashkumar-jt4yi]

Ye green colour ka background jo h vo aap kha se purchase kiye hain btaiye please 🙏🏻🙏🏻🙏🏻

[@easytechzones]

Amazon pe cutting mate search kijiye

[@Avinashkumar-jt4yi]

@@easytechzones sir bhuttt time lga kl dundhne me tb jaa k mila thank you sir

[@uttammajumder1008]

Good job .

[@easytechzones]

Thanks

[@kobitadurgesh6123]

How bootloader in my microntroler in the mobile phone . Please make video in this topic.

[@easytechzones]

Ok

[@creativetechinhindi]

Nice

[@easytechzones]

Thankyou

[@sadanandasahani6633]

Nice background music

[@nosafetyswitch9378]

Funny that 2 USB ports in the end actually shut down due to overload, you can see the meter screen going black 🤣

[@haxemeback9304]

You need more about 12v 8A to use all the outputs

[@mustknowfacts6965]

Its casual charger ,not fast charger

[@arnoldbencz6886]

May be for 3 and 5Ampers?

[@pavankristipati3924]

Bro how much power to send ardinuo (like 5v or 12v or ac)sensor like recently u make one lamp

[@easytechzones]

In this video i didn't use any arduino

[@easytechzones]

In previous video use 5 v

[@pavankristipati3924]

In Any ardinuo only we will generate 5v or any high volt

[@pavankristipati3924]

Bro my mobile was supported 20w fast charging so can I generate 20watts or only 5v

[@HarpreetSingh-nl1li]

5v 5mA dc

[@ulaganathana8365]

Very very good thanks you so much

[@kacpreusz9911]

Good job, but next time short out data pins in USB connectors.

[@joshuvajohnvarghese2372]

This is okay for small 5v uses or its kind of okay for features phones not smart phones because those buck converters are not efficient in more than 1 ampere so it's not practically good.

[@RahulDas-xi9rk]

2nd music name please tell me 🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏

[@thatsoneminuteCUT]

Thanks

[@manuelgomezlopez5090]

great congratulations you could make one like this with wireles charger

[@dkreativechannel7064]

kzbin.info/www/bejne/jqHboHmhgcysZq8

[@ahmedkareem9210]

connect the two center electrodes from the usb and the charger will be faster ... from iraq

[@ahmedsoffy581]

nice work

[@easytechzones]

Thanks

[@OklaChannel]

You'll broke your phone power IC if you do this.

[@haxemeback9304]

Nope the phone will fast charging at 5v and upto 5A if your phone has fast charging if not than it will charging at 5v 1A

[@mdshohagvai2434]

Will there be a short circuit or overload charging problem when charging Android phones and other 5 volt rechargeable devices with this multi port charger?? Please reply

[@igarras5285]

someone explain me plz whats the difference between this and the normal charger? im just new to this type of learnings

[@easytechzones]

You will get 2.5 amp from each port(1st 4 porr)

[@paulpease1788]

This one is garbage for more than 2 ports and will only fast charge on one

[@zidniechannel8891]

mantap👍

[@easytechzones]

thanks

[@vinceb9310]

Nice Job, Thanks for sharing

[@balurajedra28]

Nice work

[@easytechzones]

Thankyou 🙏

[@user-co3ii3fk1y]

wow, you space ingeneer. 👍😮

[@loveispaining3934]

variable suply on 2n3055 and small transister 1 to 24 volt in put

[@easytechzones]

Ok.

[@loveispaining3934]

@@easytechzones ma intizar karu ga

[@kdcreativity6201]

From how many rupees you purchase the 300w buck converter and from where???????

[@easytechzones]

Amazon

[@kdcreativity6201]

@@easytechzones what's the price

[@soumyadeeppatra6246]

Very nice👍

[@easytechzones]

Thankyou 🙏

[@loveispaining3934]

plese i veryneed this suply in this month bro plese i see you all video and like them

[@easytechzones]

Thankyou 🙏

[@loveispaining3934]

@@easytechzones yiu make for me

[@paulpease1788]

It wont work. There are laws of physics that are broken here. If you think this guy has discovered a way to break ohms law, be my guest. Just so you know...he didn't. The more units you connect the less power each unit receives. It quickly becomes an ultra slow charger as you connect devices. Don't fall for this. Research everything you see online

[@paulp9458]

Nice work appreciate

[@arshia8315]

fast charging its 9V

[@easytechzones]

9v??

[@arshia8315]

yes

[@arshia8315]

my phone is fast charg when i connect to my power bank (5v) iti sn't fast charg

[@yeltsinandrew343]

Fast charge protocol must be activated by a usb handshake where your phone communicating with your charger or power bank and ask for 9v or 12 v,15 or 20v,24volts most devices support 9 v type c devices such as one plus charge at the rate of ,20 volts

[@jibin180]

@@easytechzones its for turbo charging at 9v in powerbank & turbo charger...

[@Shu51]

Well, that's very inefficient.

[@easytechzones]

ok

[@yeltsinandrew343]

This is madness an phone or a poer bank needs to be charged atleast 1.5 to 2.0 amps of 5 v without the host and an receiving device synchronisation (USB power delivery protocol) it won't take more an half an amp if you use it for a phone 📱 say good bye to your charging ic

[@robertcartier5088]

In which reality is this a "Fast Charger"? Most phones capable of fast charging will not recognize this power source as being capable of anything above 0.5A, and that is certainly not fast. You have made a nice, slow charger...

[@abuahmed489]

Lol...😂

[@Among_us9999]

@@abuahmed489 يا ابو أحمد

[@dabhiarvindbhai2190]

It was a so nice video 😍😍😍😍😍

[@mohanamapab6369]

very nice jobs tq

[@ericklein5097]

Voltage dropping to 4.50V at 2A on 4/6 ports. Me thinks you have a problem when you put all those buck converters together (or its the wiring itself having voltage drop as it gets further away from the AC/DC power supply.

[@ericklein5097]

The last buck converter in the chain gives you the most stable voltage when you load it up and the other two can't hold their voltage. So I got my money on there being an issue with putting the buck converters together. That's besides the issue of the data pins and I'm guessing you used a dumb load like the light because you probably couldn't get phones to draw any significant amperage.

[@Geva0834]

It's not fast charging before read what is the fast charge

[@user-zx5qo2wk9o]

All you did was make a few holes in the plastic and solder a few wires. Everything else is like a child's construction kit. What's interesting here?😂

[@deadpooltm9088]

Good bro 👍👌

[@easytechzones]

Thankyou 🙏

[@deadpooltm9088]

@@easytechzones welcome bro

[@SomnathDas-ej3ve]

Do I need to short the data pins of the usb socket

[@rakeshjaiswal7273]

Awesome broooo

[@antoniosolis9172]

I don't understand why use two kind of modules, what diference between LM2596 and XL4015?