How to Make GRBL+Arduino based Mini CNC plotter machine at Home

[@christopherlee3045]

I gotta hand it to you, I know how difficult lining up the rails and everything can be with just using diy materials from around the house. It literally looks like it made of garbage but you got it working. Congrats.

[@ShubhamSuresh]

Thanks man for kind words.... :-)

[@shamanthkarthik7276]

Sir what is the dimensions of pvc Casing pieces (For cutting them) Please reply

[@sandeshshirse6274]

Sir why it is important to connect jumper cap on M0, M1 and M2.

[@easycutsolutions6196]

Good explanation...thanks...,👍👍

[@rahuldahalke2707]

Really sir ur every video is awesome and ur work too...keep it up sir👍

[@sensorayiya7404]

thanks, man... it's work for me....

[@omsingharjit]

It seems you have use thread instead of Timing belt or screw For Linear Movement right ?

[@SurajYadav-tx2gy]

Awesome work brother 🔥🔥🔥👌

[@thc0079]

Bro U r Fantastic Seriously

[@ShubhamSuresh]

Thanks bro.!

[@anantajamdhade5683]

really awesome video sir. and very good explanation

[@shantanutiwari9330]

which is best software inkscape or benbox .

[@summytsu2991]

hey nice video but i get this error when for grbl controller File "servo.py", line 52 def bezierslopeatt(((bx0,by0),(bx1,by1),(bx2,by2),(bx3,by3)),t): ^ SyntaxError: invalid syntax can you help me thanks

[@ShubhamSuresh]

I think you uploaded the wrong firmware to ardino

[@Ninjacat9000Ilovebigfloppa]

Sir, can a Nema 17 be used instead of the 28BYJ-48 stepper

[@Comosau]

hello great video i have a question before i try to make it are there any other rails or do i need to use bicycle rails?

[@ShubhamSuresh]

you can use any other rail also

[@kumarnitnarwade6656]

Shubhm sir, I wnt to share one thing with u..yesterday I saw ur cnc making vdo..nd thn i try to make it, sr i don't believe ...its make a properly...thnk u sir....for uploading such types of video....sir i wnt to learn about electronics projects. If hv ur class can I join it sir.

[@ShubhamSuresh]

Thanks Mr. kumar nit for your interest, but we are not running any classes for such training yet, but we provide DIY kits & All components for all the projects. for more check out our facebook page here facebook.com/STROniXTechnologies/

[@poojagavhane5739]

Ok sir

[@atihrot755]

Sir, I would like to ask you why the Mi GRBL AXIS servo controller does not work for me when expanding? Thank you for the good advice.

[@Milos_Animes]

I mounted my cnc 20 in length by 15 cm in width, will it work normally with that size?

[@davitos1000]

Very good ! May ask you , how do you calibrate the Z axis ?

[@amnno9035]

thank you but i have question when i go in inkscape and i click extention and click MI GRBL and when i apply it s show me error what should i do?

[@MauroC74]

Bicycle spokes and pvc casing pieces.... kudos

[@MrInnovative]

Excellent

[@ShubhamSuresh]

Thanks Mr. Innovative.! Actually it's all yours, inspired by you.

[@gonzalobaez16]

Hi! How are you? I'm having trouble setting up my 28byj-48 motors, I don't go a few steps pressing to make it record 1mm. I would be very grateful. Ej: $ 0 = @t (x step / mm) on the x and y axes, what values ​​did you put? Thanks greetings.

[@ShubhamSuresh]

I did it All on default settings. but I made a change in motor connections you can check here kzbin.info?q=https%3A%2F%2Fdrive.google.com%2Fdrive%2Ffolders%2F11KZSVvxdrgIqA8t6cJs33jBR6Z2Ip7j9%3Fusp%3Dsharing&event=video_description&redir_token=_5cf-DD4Q9QB5UpfwKk-4wlYTDZ8MTU4NjY2OTk1MEAxNTg2NTgzNTUw&v=KEvOdXhf_vQ

[@moonnight3847]

also how do you color with arduino ive seen people not only draw but also fill with the pen please teach me

[@filaliboubrahmiakram4210]

I want to ask you if i didn't modify my stepper motors 28BY-j48 to bipolar ,my cnc machine will work ?

[@ShubhamSuresh]

no, it will not work

[@A2Zfarmsupdate]

Shubham the pen is vibrating !! I mean the lines are quite distorted when the are drawn ! Any idea y it can b so ? Regards for d work done buddy @shubham

[@____Potato_____]

can i use the same codes for my cnc

[@moonnight3847]

this is so amazing could you please help me with a project im doing i will like to know how to set up arduino to get the ploter to draw with shadows not just lines, and also how to burn a picture with laser thank you

[@livecanlife2831]

How many voltage you gave.

[@ShubhamSuresh]

12v 1A

[@_DarkKnight]

How did you transformed that unipolar 28BYJ-48 motor to bipolar?

[@piyushchanchlani]

Hey can you please help me out

[@parasagarwal6755]

Sir from ware i can learn ardunio programing plz tell

[@xyzismememe]

Sir, can i run this cnc machine using the gctrl.pde in processing? instead of grbl controller?

[@aincradsky]

what is your inkscape version?

[@ShubhamSuresh]

use 0.47

[@lubnarais3520]

Please tell me why grbl controller does not connect to the UNO when I load MIGRBL code in Arduino UNO. did change some thing in file as my servo is not working on M3 S90 grbl command?

[@ShubhamSuresh]

are you select correct baud rate? baud rate should be 115200

[@ashoknagar3115]

Can i use ul2003 driver

[@vignesh_waran]

how to make this without cnc shield by directly connecting the uln2003 driver to arduino uno

[@charimuvilla8693]

Finally smaller stepper motors getting some love. Do you thing you can make a 3d printer with these? It should be worth a try

[@达恩]

Good

[@brenda.slasluiza5810]

Hi, I am doing a CNC machine but my motors have high levels of temperature , I am working with the same motors of this video , do you have any recomendation and the last question is necessary to activate the micro step?

[@charanop3718]

How did you gave power supply to it, please help

[@dipakgupta1519]

does the length of spokes affect the programing

[@ShubhamSuresh]

No! it dose not affect the programming.

[@jesusconde3685]

Hello my friend, I was reading the another comments and I had read that you used 12 V to source the shield. The cuestión is: Could I use 9 V with the same results that you had or the motors will be lose power?

[@ShubhamSuresh]

with 9V the motors will not move with full power.

[@atihrot755]

@@ShubhamSuresh The motors are on 5V and if you put 12V or 9V, the motors will still overheat. Maybe they will even be destroyed. It is pointless to put so much voltage. Just 6V is enough.

[@rsdudes9115]

Sir can i use dvd motors instead

[@rahilshaikh3782]

Make video for programming and controlling in detail

[@nedjmobouras1954]

kzbin.info/www/bejne/f3LWgaKHhNVjodE kzbin.info/www/bejne/pnSxYZqip5d7eZI this My CNC if you Interested I will share videos how to program It And how to build it

[@ishanchamith3486]

X and y axis bicycle spoke length plz

[@arduinoprojets4718]

i cant upload hex file ..error.. no com.. x red..can you help me please?

[@anitabharti2260]

What if I need to plot something on big sheets like A4 and legal??

[@ShubhamSuresh]

Hello, for A4 or bigger size watch this video kzbin.info/www/bejne/gXbZgJeOncuSrLM You can plot on any size by using this method.

[@vkrishankumar3380]

Sir x axis and y axis rod length

[@ShubhamSuresh]

as par your requirement

[@kashifbabu-wt8ps]

Sir 0.5 ampere not available what about 1 ampere. And I said 28bjy 48 motor 5 volt and adapter 12 volt will not cause any problem.

[@muthukumaran2814]

Iam using l293d ic how to connect grbl programm

[@discoverelectronics9207]

I made it but not workin showing (GRBL Eh servo 0.9j) (G21) WHAT I DO NOW?

[@ShubhamSuresh]

uninstall all the previous GRBL libraries in arduino. and install MiGRBL, and then upload it to arduino.

[@sibgha985]

Arduino coding kyi smaj nhi ayi???

[@AreejMehboobEB]

Can somebody help me with code where to find it?

[@rhugveddangui8020]

After doing all the connections I created a gcode and also clicked begin. But motors are not rotating. Please help.🙏

[@chirantangayakwad126]

What must be the power supply given if 2 Nema 17 motors are given (mention the input Voltage and current)

[@ShubhamSuresh]

12volt 3A will work

[@dipakgupta1519]

Are you giving 5 volt power to CNC chield also ? or 12 volt power

[@ShubhamSuresh]

I'm using 5Volt 2A power supply for CNC Shield.

[@Milos_Animes]

What is the average of the CNC? Her size?

[@dr_venky]

Sir can I use uln2003 instead of cnc shield and driver...and is there any alternative for that timer belt and Pulley

[@ShubhamSuresh]

yes! you can use that but you need to change arduino code also, for more details about code and programming watch this video kzbin.info/www/bejne/npu9mImlj8h7o9U

[@dr_venky]

First thank for the reply... In uln2003 I having the problem that the stepper jst rotate in single direction only that I clockwise it doesn't rotate in Anti clockwise...im using arduino Nano +2 28bjy 48 stepper +sg90 tower pro stepper..I use the problem which is in the link...dono wat to do..pls help me..thank u

[@ShubhamSuresh]

Try L293D IC instead of uln2003

[@chetankumar6158]

sir, your video was awesome i have also made it, both X and Y motors working properly But my servo motor was not responding what is the solution ??? please help

[@siddharth2040]

meriko bhi same prob ho rhi hai what should i do ???

[@sensorayiya7404]

just remove all of the gbrl libraries and then install migbrl library... it's work...

[@piyushchanchlani]

@@sensorayiya7404 can you please provide your contact details social media

[@piyushchanchlani]

How much power supply are you giving to cnc

[@lillysukumar2318]

sir which version of inkscape are you using ? can you give me the link

[@ShubhamSuresh]

inkscape 0.48

[@gamerkid5251]

Best CNC

[@Dingguano]

Why do yo need 12v power adapter?

[@kumarnitnarwade6656]

I'm waiting for ur next video.

[@dipakgupta1519]

ok thaks my friend can u say me the estimate budget of this project

[@vishalgaurav4411]

How to set the zero position (initial position) ?

[@subhashpbalan]

I did this but it's failed because of software issue Soo please make explained step by step programming ,now I subscribed your channel so believe you will makes it Thank you

[@ShubhamSuresh]

Next video on related subject is on the way. keep watching. thanks for subscribe!

[@AbdoKeeper]

can it work for arduino nano

[@ShubhamSuresh]

yes it is....

[@chino5567]

Hola Ing. muy buen aporte a la comunidad de hecho estoy haciendo uno gracias a sus conocimientos, ayúdeme con algo necesito saber por no me esta funcionando el servomotor, y cuanto de voltaje le paso en la calibración de los derives del SHELD v3 muchas gracias

[@ShubhamSuresh]

sorry but I can't understand what you saying. can you say it in english

[@chino5567]

@@ShubhamSuresh Hello Ing. Very good contribution to the community in fact I am doing one thanks to your knowledge, help me with something I need to know why the servomotor is not working, and how much voltage I spend in the calibration of the derives of SHELD v3 thank you very much

[@ShubhamSuresh]

@@chino5567 Which GRBL version you are you using? for v3 shield use 12volt 2 amp power supply

[@chino5567]

@@ShubhamSuresh power source pc power 12 volts porfa help me

[@rexcode9366]

@@chino5567 buy a seperate adapter

[@deepakjain2348]

I want one machine if u can arrange

[@prabhakarasewar7226]

dude I'm here from mr innovatives video I have gathered all the parts except those sliding bars can you tell me the size and one imp thing what is the area it can draw max size of image it'll draw

[@harshitrajsud9hridn]

Really good

[@ShubhamSuresh]

Thanks harshit........It will be great if you share it...

[@anindyamandal86]

can i use Arduino Uno R3 Compatible Board ATmega328P | CH340G | USB Cable

[@ShubhamSuresh]

Yes! you can use any arduino board.

[@anindyamandal86]

Will the programming be same if the audrino differs

[@anindyamandal86]

And the connection with cnc shield will also be same if i use that audrino which wrote in the first comment ??

[@ShubhamSuresh]

Yes! programming and connection will be same if you are using that board.

[@sarinsarin9667]

Sir this machine can draw on a A4

[@ShubhamSuresh]

you need to change diamensions of it

[@sarinsarin9667]

How to change sir please make a vedio of it I buy all the items but the motor is NEMA 17

[@acemioyunda8024]

Kalibrasyon?

[@jayantdangui8383]

How much does it cost

[@discoverelectronics9207]

thank you for reply it showing unfined feed rate.

[@rsdudes9115]

Bro my servos are working but stepper motors are not working pl make a solution

[@piyushchanchlani]

Cause bro you haven't converted stepper to bipolar

[@9700784176]

Please provide grbl settings too..

[@ShubhamSuresh]

watch my resent video for grbl setting here is link: kzbin.info/www/bejne/gXbZgJeOncuSrLM

[@vikramthakur1495]

Nice guruji

[@ShubhamSuresh]

Thanks vikram.....

[@ankitanil1389]

is it an a4 size paper

[@ShubhamSuresh]

No this is not A4 size paper, but if you want to draw on A4 size paper follow this link kzbin.info/www/bejne/gXbZgJeOncuSrLM

[@muhammadabdurrehman1616]

Sir please send it's parts dimensions.

[@vinayakdodakundi1881]

How to remove m18, m300 error

[@224vicky]

bro i need ur help for the programming

[@ShubhamSuresh]

Hello Vikram, in which programming you need help.

[@224vicky]

bro iam using neema stepper motors can i draw using benbox software orelekscam

[@224vicky]

bro can i get ur whats up number i have assembled all the machine just iam unable to run the motors

[@ShubhamSuresh]

for contact details see video description.

[@muhammadijaz4037]

Hi i need this machine how much cost total

[@subhadeepkunduastrophotogr2596]

Sir please help me. Sir are you sold this project At any cost.I will agree . Please sir

[@ShubhamSuresh]

Inbox me for this project. on [e-mail]

[@udayshah3566]

@@ShubhamSuresh Hi ple coast diy mini cng..i need

[@ShubhamSuresh]

@@udayshah3566 Inbox me for price details. on [e-mail]

[@joeynelbongabong3762]

Can i use this as pcb plotter?

[@ShubhamSuresh]

Yes! you can. but you need to change motors. the motors used in this project are not have enough torque for task like milling.

[@joeynelbongabong3762]

@@ShubhamSuresh does changing the pen with permanent marker would also work for pcb plotting? Instead of milling

[@ShubhamSuresh]

@@joeynelbongabong3762 Sure if you want to use permanent marker, it is fine.

[@joeynelbongabong3762]

what version of inkscape are you using?

[@ShubhamSuresh]

@@joeynelbongabong3762 0.47

[@rajchitrashala1912]

Agar is machine Mein pain ki jagah iron Lagaye Tu thermocol cutting ho jayegi

[@abhishekpal4091]

Servo motor not working

[@madrynchubut]

Tus proyectos son muy buenos, solo estaría bien que no pases tan rápido el cursor por la pantalla, es muy difícil seguirte en la programación. Gracias¡¡

[@ShubhamSuresh]

Thank you! but programming is not that much complex

[@A2Zfarmsupdate]

@@ShubhamSuresh sir the micro servo stops responding!! It will work when u reconnect it periodically!! Please help me sir !

[@congtran4129]

hey bros, it's really awesome. can you send me the arduino code for this machine??

[@ajmolhoque2473]

Nice

[@ShubhamSuresh]

thanks!

[@yoyoart4444]

are you program arduino before make this video

[@ShubhamSuresh]

you need to upload program to making this machine alive

[@aincradsky]

Error in saving the .gcode file in inkscape

[@ShubhamSuresh]

which version of inkscape you are using? did you installed mi extension to inkscape?

[@denisatkins3145]

Is there any chance that you might beadle to send me what you did in the programming and calibration, you went to fast. This is where I have ALL my problems,PLEASE Thank you

[@ShubhamSuresh]

yes bro I agreed that, video is fast but if you pause it and follow the steps, I'm sure you will get your output. if not mail me

[@imagine1706]

I made you given mini cnc potter machine watched from you tube . : But my servo motor is not working.. : Plz suggest me. : Its only move 0 degree to 180 degree then stop ..

[@ShubhamSuresh]

ok.. i think you are using GRBL1.1. so first remove all grbl libraries from your pc and then download the MIGRBL zip from the link in description, extract it , then copy the folder MIGRBL and pest it into arduino/ libraries.

[@imagine1706]

@@ShubhamSuresh no sir the same error is coming...

[@ShubhamSuresh]

@@imagine1706 show me snap of error

[@dipakgupta1519]

thanks alot

[@sanchithaudana9610]

super

[@dipakgupta1519]

can i use my phone charger

[@ShubhamSuresh]

Yes you can, if it's output current rating is 2Amps.

[@alishaikh6812]

Total kitna kharcha aayga ye CNC machine banane mai

[@ShubhamSuresh]

approx 2 to 2.5k rupees

[@abhishekpal4091]

Servo motor not work

[@bentarwahyuprabowo7972]

Servo not working. Can you help me?

[@ShubhamSuresh]

is you connect servo correctly....?

[@ShubhamSuresh]

Which Grbl version you are using?

[@bentarwahyuprabowo7972]

I using grbl servo v.09

[@bentarwahyuprabowo7972]

when I try to code the s30 m300 servo it doesn't go down then I tried to code the s50 m300 not going up servo only vibrates and is hot is there something wrong with the PWM settings or do you have other suggestions?

[@ShubhamSuresh]

@@bentarwahyuprabowo7972 which grbl version are you using...

[@atihrot755]

The motors are on 5V and if you put 12V or 9V, the motors will still overheat. Maybe they will even be destroyed. It is pointless to put so much voltage. Just 6V is enough.