Thanks for watching . If you LIKE , please SUBSCRIBE to my KZbin channel . Warning, not for heavy-duty.
Пікірлер: 111
@TNTX20102 жыл бұрын
Very nice. I think I'd want to leave the hex head on the bolt so I could unscrew it later if I needed to disassemble it, but that is so cool.
@John-46494 жыл бұрын
Great idea man, it’s cheap and easy, i did it a while back and it’s still working fine! Good enough for the oilfield!
@jc_hz41964 жыл бұрын
Good idea but if the bolts still have thread on them, the hinges travel as they open, maybe not a big deal but they do translate.
@chriswinfield93963 жыл бұрын
May work out good for my garage door plan on building. As the door opens the seal lifts and scrubs the concrete less.
@VerifyVeracity10 ай бұрын
But if you put more than one of thees questionable hinges on a door make sure the threads are going the same way, & the it lifts up rather than down might be a good idea.
@rockhyoung6 жыл бұрын
Did this on my home made forge... Works good, would look better if I was a decent welder. Thank you!!!
@bizcochodulce10 ай бұрын
Thanks for the video. I tried it. My problem was to make 2 hinges for the same door. They have to be perfectly aligned.
@mttpsg004 жыл бұрын
i appreciate your inventivity. these work for a light gate. and when you need to remove the gate i think it's pretty difficult to apart and then put together again.
@DuncanAitken4 жыл бұрын
...just unscrew the threaded rod.
@davidjames21452 жыл бұрын
...or swap it for a rod that fits through the thread diameter. 🇬🇧
@juanaraoz92375 жыл бұрын
Excellent idea! Thank you!
@web3.0_metaverse_XR2 жыл бұрын
Wow amazing how can we make movement tight ? And add extra torque?
@diegocordova3304 Жыл бұрын
Tons of stupid ppl posting... this is a GREAT idea. I will test it tomorrow on my self made grill.
@trapplord15148 ай бұрын
Did it work bro?
@АлексейКор-ш1э6 жыл бұрын
Для форточки в теплице или оранжиреи самое то.
@perumalsanjeevi2 жыл бұрын
Wow this is simple and great, thanks a ton for sharing
@theartofcraft0112 жыл бұрын
Glad you liked it!
@drekson23 Жыл бұрын
but the weight of the heavy gate I think the thread is not enough to hold forever. it will also slowly tear the thread especially if its ordinary bolts and nut prone to rust.
@ravivarma89196 жыл бұрын
Good, but this works only for less weight ones,for heavy weight Gates and doors the thread will get rubbed,
@theartofcraft0116 жыл бұрын
Yeah , you're right.
@NeilJeanLouis6 жыл бұрын
Ravi Thalari for havy doors or gate biger bolt and nut
@sergiodiazn6 жыл бұрын
It don´t need the thread to work. Just weld the bolt to the nut you prefer and if the thread get rubbed nothing happens.
@akMuratNET6 жыл бұрын
Use it bigger nuts and bolts
@Harinair726 жыл бұрын
@@sergiodiazn right!
@colindante51643 жыл бұрын
You're a genius. Awesome !! ))
@theartofcraft0112 жыл бұрын
Thanks :-)
@japan-e9j6 жыл бұрын
Good idea
@fabiosouzaliviasouza82576 жыл бұрын
Se ficar em um lugar descoberto , depois da primeira chuva você me fala o resultado...
@marichamym10934 жыл бұрын
Good idea thanking you
6 жыл бұрын
Pq não mostrou a solda?
@brandolino552 жыл бұрын
What is the payload? It's for a cage door.
@ticocaradori6 жыл бұрын
Assim não é seguro pois fica fácil corta o parafuso
@jamalh23595 жыл бұрын
Con el calor se aprieta la rosca🤣🤣🤣
@pintobengkel8112 Жыл бұрын
Hadir nyimak boss ku suksesselalu buatbossku 👍👍👍
@amawiteachhakchhuakamawite7864 жыл бұрын
Please how to home made double action hinges ..please upload video.
@АлексейМороз-л5м6 жыл бұрын
Площадь контакта мала износ быстрый
@ПавелСорокин-й8м5 жыл бұрын
Ок
@rebazhamaaminchaqizh26865 жыл бұрын
Ok
@pussinboots11456 жыл бұрын
It's cheaper to buy hinges than buy a welder.
@theartofcraft0116 жыл бұрын
every hinge must be welded
@josemarin69795 жыл бұрын
Its cheaper to stay out of a conv you know nothing about. What you gonna buy hinges and stick them on with chewing gum?
@davidcrumrine11654 жыл бұрын
Sure let's buy cheap hinges and bolt them on so someone can just take the bolts out and walk through. Your comment is just one of the most useless comments. I sure don't see you putting your mind to good use and wasting what brain cells you might have to bring someone who is actually putting their mind to some kind of good use unlike you.
@jamieroberts53525 жыл бұрын
The hinge will climb and drop on the thread so whatever is opening wont sit flush and could catch if it hast to travel more tha 45°. Great idea but not clean enought
@cdawg91493 жыл бұрын
Is it possible to spot weld the nuts to the thread
@EvoKalokoYT6 жыл бұрын
Good idea but i think you need a couple of that for heavy doors
@davidcrumrine11654 жыл бұрын
It is just a demo made out of scrap genius. Anybody with a welder and any kind of fabrication skills knows they need more than 1 hinge to hang a door. The standard door has 3 hinges so I am sure most people will use at least 3 hinges per door.
@stamford704 жыл бұрын
This may be the hinge I’m looking fo to create a hinged cooking grate on my kettle bbq
@habiks2 жыл бұрын
it's all fun until you have to take it apart
@raybukilic18442 жыл бұрын
It's easy to take it apart,just roll the threaded rod either side,that's why is space between nuts
@walpurgispalazzo Жыл бұрын
Zip cut haha
@lemoinexavier4 жыл бұрын
Wow! How did you know what I was searching?? Thank you!
@markanthonymiranda12594 жыл бұрын
Great improvised,,but HINGES have load capacity like Dead load for weight..that tiny invention has limitations please consult your city engineers before using this experiment..door weight HINGES door frame/jamb that will carry the weight of a steel door..use biggest bolts and nuts for DIY Hinges..😎😎
@davidjames21452 жыл бұрын
Consult city engineers? For a farm welded hinge? Oakey dokey city boy. 🇬🇧
@kabrother78942 жыл бұрын
With that you cant open widely
@ИванИванов-ю3т8ч3 жыл бұрын
Резьбу съест, и всё.... Приплыли..
@frankc64303 жыл бұрын
those ends, top and bottom, need to be spot welded or something as the all thread can still unscrewed loose over time...
@theartofcraft0113 жыл бұрын
Yeah , that's true .
@ЕвгенийХусаинов-ц9з3 жыл бұрын
Для ящика самое То👍 на двери думаю не надолго, а так идея👍
@CanalSHAWBE5 жыл бұрын
Interessante vamos ver se funciona 👍
@hectorcalderon30114 жыл бұрын
I usually buy the weldable hinges it cost like $6 a piece this way it cost me less than a dollar to make one thank you very much
@vikramjadhav82315 жыл бұрын
Good boy now next please....
@Nepredstavleaiu6 жыл бұрын
Вариант если нет петли. Полезная идея. Спасибо.
@MenachemPritzker2 жыл бұрын
why such a small pile of hinges?
@fantomas69926 жыл бұрын
Perfect thanks.
@zacksrandomprojects96985 жыл бұрын
Good idea. Ive used small tubing and small round stock that slides inside the tubing before to make hinges, but not nuts and bolts. I like it. I subscribed btw!
@jomongeorge71105 жыл бұрын
good
@RustyInventions-wz6ir9 ай бұрын
Just found your channel and Subscribed. Very nice
@Шам-в7г6 жыл бұрын
Грязь в резьбе постоянно будет
@cucuMobile24702 жыл бұрын
Nice
@wandofiuza84256 жыл бұрын
Bem bacana
@damiandworecki55816 жыл бұрын
No le veo la utilidad por lo menos para mí.
@christosvolikakis15234 жыл бұрын
Great idea for light duty or based on your definition of “heavy duty”. If you’re going to go this route, I would recommend using some washers as spacers in between square tubing while welding to take the guesswork out of it
@boyskilledtv94692 жыл бұрын
Great job 👌👌👌
@theartofcraft0112 жыл бұрын
Thanks dude :-)
@ИскаринаДинара6 жыл бұрын
Куда нибудь в сарай
@cdawg91493 жыл бұрын
DuuuuuuDDDEEEEE. Nice
@theartofcraft0112 жыл бұрын
Thanks! 😁
@odnoradio16886 жыл бұрын
!!!
@ooleg22296 жыл бұрын
SupeRR
@АдряноЧилинтано4 жыл бұрын
Резба сломал
@JsCrazyCutzLLC5 жыл бұрын
👍subscribed
@vladimirkamenskij26346 жыл бұрын
Дверная петля !
@aino51502 жыл бұрын
The Best! I still use your idea to make this easy and simple thing. You Rock!
@theartofcraft0112 жыл бұрын
Thank you! Cheers!
@БекзатМахатов-д5ч5 жыл бұрын
Плохая идея заржавеет резба через 3 месяца и кирдык
@МихаилИванов-р2г4ш5 жыл бұрын
Или песчинки попадут и туго будет, а потом оторвёт!
@евгенийстар-у6я4 жыл бұрын
а если смазать ? Да и какая ещё дверь
@sendangarwana80145 жыл бұрын
Jozzzzz
@ticocaradori6 жыл бұрын
Fora que fica bem mais caro
@jkgkjgkijk2 жыл бұрын
Got zinc?
@IIIoctak6 жыл бұрын
Как потом снять дверь с таким завесом?
@M20Gaz6 жыл бұрын
сергей шостак выкупитть шпильку и всё. Многое раз применял такой способ. Очень удобно.
@oswaldoavendano66636 жыл бұрын
Antiestetico y poca seguridad
@nathanblanchet26484 жыл бұрын
Great way to make custom sized hinges. That is a another great way for me to use my everlast welder to make things.
@tayebcherfa66484 жыл бұрын
Très intéressant. Bravo! Bonne continuation et merci beaucoup.
@chadgiffen60263 жыл бұрын
This should not be classified as heavy duty when those are tack welds. No weld strength considerations.
@enriquegutierrez597 Жыл бұрын
It's just to show how it's done.. you can put a heavy weld if you'd like
@arniekando68464 жыл бұрын
fery nice idea but not for a security gate. To much space between for a crobar to rip it apart in seconds.
@davidjames21452 жыл бұрын
With an enthusiastic weld no crowbar is going to touch that. Post a video if you can prove otherwise. 🇬🇧
@BrianSVT4 жыл бұрын
Life hack... right cuz everyone just has a welder laying around in a junk drawer
@a1crazychewy4 жыл бұрын
Brian England I doo lol 😂
@zacharywaterman1843 жыл бұрын
Me too
@davidjames21452 жыл бұрын
The audience for KZbin videos is normally self-selecting, as in if you don't have a welder then a video about making welded hinges is probably not for you. 🇬🇧
@petrakiaugusto6106 жыл бұрын
bom
@sanjaygoyal79445 жыл бұрын
Try and utilize your creativity in a much better way