Good job, better than paying $1500 for a flashy machine 👍
@DIGITALDREAMSSUBLIMATIONTIPS3 жыл бұрын
You are right...a bit of commonsense can save lots of money 💰😊
@letsgetto1millwithoutvids2 жыл бұрын
Not really all that equipment probably cost more that a cheap I'd card printer
@chingonyayo Жыл бұрын
Can you make me an id?@@DIGITALDREAMSSUBLIMATIONTIPS
@choolwekanjolo2782 Жыл бұрын
Wow, wow, tomorrow I'm going to create mine
@yoseflopez48973 жыл бұрын
Where could I go for lamination and cutting after it's been printed?
@yoseflopez48973 жыл бұрын
@Action What about the PVC? Also, I'll need some better glue cause that Elmer's crap just ain't cutting it.
@yoseflopez48973 жыл бұрын
@Action I'm not sure where to get the PVC like he has.
@yoseflopez48973 жыл бұрын
@Action Sorry I confused that step with another video lol. Any advice on formatting this in MS Word?
@yewfuh8692 жыл бұрын
i was wondering is it waterproof?
@electronixTech3 жыл бұрын
Super job. It looks very professional.
@DIGITALDREAMSSUBLIMATIONTIPS3 жыл бұрын
Thanks a lot 👍😊
@chrisdarby8332 жыл бұрын
Very very good, thats an awesome job
@DIGITALDREAMSSUBLIMATIONTIPS2 жыл бұрын
Thank you so much 💓
@vincepitts92213 ай бұрын
Great I am going to give it a shot !
@rizelmahomok20433 жыл бұрын
what's the difference if I cut with scissors?
@rizelmahomok20433 жыл бұрын
What if we don't have those card cutter?
@TanmayArtiste4 жыл бұрын
Is it the photo printing paper? I mean i can print in any glossy photo print paper?
@DIGITALDREAMSSUBLIMATIONTIPS4 жыл бұрын
Yes,photo glossy paper
@yewfuh8692 жыл бұрын
hi, what if it gets to water, is it waterproof?
@DIGITALDREAMSSUBLIMATIONTIPS2 жыл бұрын
Yes, it's waterproof 👍
@yewfuh8692 жыл бұрын
@@DIGITALDREAMSSUBLIMATIONTIPS how? normal paper right? if you cut at the edge, it supposedly will get wet when gets to water
@yewfuh8692 жыл бұрын
@@DIGITALDREAMSSUBLIMATIONTIPS or u use glossy paper?
@DIGITALDREAMSSUBLIMATIONTIPS2 жыл бұрын
@@yewfuh869 it's glossy paper , after it's laminated ,water won't spoil it , you can check it yourself after making 1 piece using method shown in my video.Lamination will protect it from.water .
@JohnSeed1 Жыл бұрын
I left the British army in 1993andvi lost my army id card .could you make me a replica id card please. The old army id cards in the 80's and 99's were made in these pouches and the layout is photo top left and then numerous details etc. I could find an example to use off Google. Thanks in advance Mike.
@bigkyro39123 жыл бұрын
Whats size of pouch?
@DIGITALDREAMSSUBLIMATIONTIPS3 жыл бұрын
It's 3.25 inch width and 2.5 inches height .Type id card size lamination pouches on Amazon.com to buy them easily ...
@sonofsteve5663 жыл бұрын
how much to have you make 4-me?
@norielmontano934 жыл бұрын
Hi. Thank you for this video. I actually tried this and the result was awesome. But can I ask, how can I secure the sides that has not been laminated? Isn't it going to peel off eventually?
@DIGITALDREAMSSUBLIMATIONTIPS4 жыл бұрын
Use any glue stick to join front and back side of sheet ,then put it in laminating pouch and laminate it in laminating machine
@DIGITALDREAMSSUBLIMATIONTIPS4 жыл бұрын
At 2:50 the doubt will be resolved.
@camerashysd71655 ай бұрын
Great work
@pardakaart15403 жыл бұрын
What machine this is actually?Laminato only
@DIGITALDREAMSSUBLIMATIONTIPS3 жыл бұрын
Yes,its a lamination machine only.
@lindastarzenski8770 Жыл бұрын
Looks great.
@DIGITALDREAMSSUBLIMATIONTIPS Жыл бұрын
Thank you..
@infotechoverloaded7214 жыл бұрын
I used the same techniques a long time ago
@ladellp51354 жыл бұрын
You never showed us how you got that layout with the 2 halves.
@DIGITALDREAMSSUBLIMATIONTIPS4 жыл бұрын
At 1:50 ,I have shown.Watch it carefully.
@DIGITALDREAMSSUBLIMATIONTIPS4 жыл бұрын
At 1:50 ,watch carefully.
@ladellp51354 жыл бұрын
@@DIGITALDREAMSSUBLIMATIONTIPS I don't mean to be a prude. But you started off the video with the two halfs already completed on the layout.
@catinmystomach2 жыл бұрын
@@ladellp5135 you can create a design whatever you like. This is not a video how to design an ID card but how to print it.
@ladellp51352 жыл бұрын
@@catinmystomach WTF... You are replying to this message that was done over a year ago. Are you alright?
@UKsystems5 ай бұрын
Please know this is functionally an ID card but does not need the specifications as some industries require it to meet certain standards of security
@donxchan93344 жыл бұрын
nice thanks
@DIGITALDREAMSSUBLIMATIONTIPS4 жыл бұрын
Welcome....
@lazzywilson7512 жыл бұрын
So much gratitude to @DRIPHACK20 bet World id creator 🌎🌎🌎
@jimcoledriphack20onig932 жыл бұрын
@Driphack20 am grateful for your help, I got the ID and it work verify my EED thanks if got problem he's nice and honest.
@lazzywilson7512 жыл бұрын
So much gratitude to @DRIPHACK20 bet World id creator 🌎🌎🌎
@jimcoledriphack20onig932 жыл бұрын
@Driphack20 am grateful for your help, I got the ID and it work verify my EED thanks if got problem he's nice and honest.