How to make Jigs and Spinnerbaits with the Do It Molds Poison Tail Jig Mold

  Рет қаралды 18,256

That Guy Skimpy

That Guy Skimpy

Күн бұрын

Пікірлер: 92
@swimjigman953
@swimjigman953 4 жыл бұрын
another great time watch this video.
@ThatGuySkimpy
@ThatGuySkimpy 3 жыл бұрын
appreciate the support !
@DaveRmk4
@DaveRmk4 7 жыл бұрын
super dope
@BassGeek
@BassGeek 8 жыл бұрын
dude that's a good looking head. Like the way it stands up and it comes to a slight point. It looks like a good all around head.
@ThatGuySkimpy
@ThatGuySkimpy 8 жыл бұрын
Yeah the poison tail is one of my favorites !!!!!!
@nipstacarter8434
@nipstacarter8434 3 жыл бұрын
The best mold going 3 type baits with it the chatters do you find the wire form stronger then cutting the potion head wire form
@ThatGuySkimpy
@ThatGuySkimpy 3 жыл бұрын
I like using the wire form best
@shellzfordayz7921
@shellzfordayz7921 8 жыл бұрын
Awesome video man
@ThatGuySkimpy
@ThatGuySkimpy 8 жыл бұрын
Thanks brotha !!!
@peterhaskin8924
@peterhaskin8924 8 жыл бұрын
They came out great. Pushing me closer to start doing my own lead.
@ThatGuySkimpy
@ThatGuySkimpy 8 жыл бұрын
Pull the trigger Peter lol. Pouring lead is a blast
@ronniemartin8391
@ronniemartin8391 4 жыл бұрын
Hey Buddy need advice what I bought here, Poison Swingtail Model pst 6 a ... There is no place for a weed guard,is this used for chatterbaits?
@ThatGuySkimpy
@ThatGuySkimpy 4 жыл бұрын
The swingtail isn't weedless. Its the poisontail that is weedless
@ronniemartin8391
@ronniemartin8391 4 жыл бұрын
@@ThatGuySkimpy What vise do you recommend for putting skirts on jugs?
@robertbabb3849
@robertbabb3849 3 жыл бұрын
what wire did you use for that spinnerbait thanks
@ThatGuySkimpy
@ThatGuySkimpy 3 жыл бұрын
store.do-itmolds.com/Spinner-Jig-Form-R-Eye_p_741.html
@robertbabb3849
@robertbabb3849 3 жыл бұрын
@@ThatGuySkimpy thanks
@stevenphillips7437
@stevenphillips7437 5 жыл бұрын
What brand hook do you use and what model number are they?
@ThatGuySkimpy
@ThatGuySkimpy 2 жыл бұрын
Most of the 30* and 28* hooks work. Im loving the VMC hooks
@smalljaw
@smalljaw 8 жыл бұрын
Awesome job Skimpy!!!!
@ThatGuySkimpy
@ThatGuySkimpy 8 жыл бұрын
Thanks brother
@FatBoyDan
@FatBoyDan 8 жыл бұрын
That's one of the molds I want to get
@ThatGuySkimpy
@ThatGuySkimpy 8 жыл бұрын
you should get it ! One of my fav's for sure !!!!!!
@FatBoyDan
@FatBoyDan 8 жыл бұрын
+That Guy Skimpy I'm gone to one day. as I'm gone to load up on molds.
@ThatGuySkimpy
@ThatGuySkimpy 8 жыл бұрын
Yeah its a great mold to get. My other favorite is the Trokar Arky Jig !!!!!!!!
@swimjigman953
@swimjigman953 4 жыл бұрын
hey skimpy what size and model and make of hook do you use for the 1/4oz and 3/8 oz when swimming the poison tail swim jig?
@ThatGuySkimpy
@ThatGuySkimpy 4 жыл бұрын
Mustad 91768BLN In size 3/0 and 4/0. Also use the VMC ones
@swimjigman953
@swimjigman953 4 жыл бұрын
@@ThatGuySkimpy i meant the round bend hooks, not the wide gap? sorry.
@royhawes5111
@royhawes5111 8 жыл бұрын
i need 20 more roy hawes jigs. going to miss ya when i move up north.
@ThatGuySkimpy
@ThatGuySkimpy 8 жыл бұрын
The..........Roy............Hawes
@jeremymiller1926
@jeremymiller1926 6 жыл бұрын
Do those pins come with the mold?? For the weed guard
@ThatGuySkimpy
@ThatGuySkimpy 6 жыл бұрын
Metal pins come with thr molds but the teflon pins you buy separate
@jeremymiller1926
@jeremymiller1926 6 жыл бұрын
@@ThatGuySkimpy thank you for the reply man. You inspired me to make my own jigs i ended up finding out about the teflon pins and base pins shortly after i messaged you haha.
@thesmitty1130
@thesmitty1130 8 жыл бұрын
Awesome video skimpy. One thing I'd highly recommend is fluxing your lead before you pour anything. Add a little piece of paraffin wax to the lead and step back. It will produce a little flame in the pot, but this will help rid the lead of impurities. Just scoop the junk off the top and you're ready to go. Hope this helps.
@ThatGuySkimpy
@ThatGuySkimpy 8 жыл бұрын
Travis Smith thanks !!! I actually do flux it every now and then. The lead I have is pretty "clean". Appreciate the tip though !
@thechavira51
@thechavira51 6 жыл бұрын
Can you use a 5/0 straight shank on the 1/2 or would that be to much? If so do I have to modify where you place the hook?
@ThatGuySkimpy
@ThatGuySkimpy 6 жыл бұрын
5/0 should work
@thechavira51
@thechavira51 6 жыл бұрын
That Guy Skimpy thanks for the help.
@thesmitty1130
@thesmitty1130 8 жыл бұрын
Also, cut down a base hole pin so that it sits just above the head. This will keep all that lead from spewing out when pouring your spinnerbaits. I did the same thing you did for pouring spinnerbaits, but I use the swim jig mold.
@ThatGuySkimpy
@ThatGuySkimpy 8 жыл бұрын
Travis Smith awesome tip !!! I will def try it out. Super appreciate it !
@thesmitty1130
@thesmitty1130 8 жыл бұрын
That Guy Skimpy No worries man. My cousin introduced me to that WA state bass fishing Facebook page. I'm down here in CA, but love seeing some of the tackle that people are producing up there. Not a whole lot of smallmouth action down here as I fish the Delta mainly. Keep up the KZbin videos.
@grantdenbow
@grantdenbow 6 жыл бұрын
Can it still be used to pour jigs after it is altered to pour spinnerbaits?
@ThatGuySkimpy
@ThatGuySkimpy 2 жыл бұрын
Yes it does !!!
@cochrankoi
@cochrankoi 8 жыл бұрын
Awesome jig and spinner bait man. Great video as always!
@ThatGuySkimpy
@ThatGuySkimpy 8 жыл бұрын
Thanks brother !!!!
@03liltonyful
@03liltonyful 8 жыл бұрын
I have the trokar arky jig and swim jig molds and the collars won't pour correctly unless I hear it up each time with a torch. How'd you get you collars to pour all the way.
@ThatGuySkimpy
@ThatGuySkimpy 8 жыл бұрын
Make sure you "smoke" the mold and keep the mold hot. Make sure no dirt or anything is blocking. Cleaner lead helps. If upsizing the hooks yuh can sometimes run into issues. I used to use the pour pot, now I like just using the ladle. I get better results
@gmanlipripper
@gmanlipripper 8 жыл бұрын
killer buddy
@ThatGuySkimpy
@ThatGuySkimpy 8 жыл бұрын
Thanks Gman
@garymccraw1466
@garymccraw1466 7 жыл бұрын
What Size Base hole pin go's in the 1/8 hole on the Pt Jig mold.
@sstefanski23
@sstefanski23 8 жыл бұрын
Jigs look great man. Think I'm going to get a few molds and give it a shot. Where are you buying your materials from?
@ThatGuySkimpy
@ThatGuySkimpy 8 жыл бұрын
Thanks !!!! Yeah it's 1 of my favorite jigs !!!! I get a lot of stuff straight from Do-It Molds. That way you know you are getting the right hooks and stuff. I do get my skirts from FishingSkirts.com though. I sometimes get the skirts from Do-It Molds, but fishingskirts.com has more to chose from. Good luck with whatever molds you get. I would also recommend the Trokar Arkie Jig from Do-It. That thing is awesome !!!!
@Skylineimage
@Skylineimage 7 жыл бұрын
what Pin are you using for the weedless?
@ThatGuySkimpy
@ThatGuySkimpy 7 жыл бұрын
Taylor Frizzell the pin that came with the mold.
@Skylineimage
@Skylineimage 7 жыл бұрын
thanks! I didn't realize one came with it
@ThatGuySkimpy
@ThatGuySkimpy 7 жыл бұрын
Taylor Frizzell no problem. Email sent !
@steveevans4932
@steveevans4932 7 жыл бұрын
thanks for another great video. My wife is starting to hate you, everytime i see your videos i need to buy more stuff. lol
@ThatGuySkimpy
@ThatGuySkimpy 7 жыл бұрын
sorry. I've actually have heard that a few times lol
@motoman3290
@motoman3290 8 жыл бұрын
Another excellent video and this time you showed how you break off the the top of the extra mold piece 👍🏻 I was going to ask about that from your other jig making videos . Nice job
@ThatGuySkimpy
@ThatGuySkimpy 8 жыл бұрын
+moto man Thanks for watching MotoMan !!!!
@garymccraw1466
@garymccraw1466 7 жыл бұрын
Can you use the Jig Mold to Make BuzzBaits, Thanks
@ThatGuySkimpy
@ThatGuySkimpy 7 жыл бұрын
I never tried using it to make buzzaits.
@seancurtin6572
@seancurtin6572 6 жыл бұрын
which hook did you use when you poured the spinnerbait? thanks good video.
@ThatGuySkimpy
@ThatGuySkimpy 6 жыл бұрын
Go Navy I believe it was a VMC spinnerbait hook
@seancurtin6572
@seancurtin6572 6 жыл бұрын
That Guy Skimpy thanks
@fishinglubbock6023
@fishinglubbock6023 7 жыл бұрын
what size hook would u recomend for the 1/4 and 3/8. the recommendations seem a little small?
@ThatGuySkimpy
@ThatGuySkimpy 7 жыл бұрын
You can go up or down a hook size. I even go up 2 sizes on some !!!
@steveevans4932
@steveevans4932 7 жыл бұрын
hey skimpy are you using .040 wire form?
@ThatGuySkimpy
@ThatGuySkimpy 7 жыл бұрын
I believe so
@jeremydickerson4183
@jeremydickerson4183 7 жыл бұрын
what size wire do you use for the spinnerbait
@ThatGuySkimpy
@ThatGuySkimpy 7 жыл бұрын
0.40
@steveevans4932
@steveevans4932 7 жыл бұрын
hey skimp can i use a 4/0 hook in the 3/8 cavity?
@ThatGuySkimpy
@ThatGuySkimpy 7 жыл бұрын
Yes !
@steveevans4932
@steveevans4932 7 жыл бұрын
i know in the video your making 3/8 oz, what hook size are you using for the 1/2 oz & 3/4 oz spinnerbaits?
@ThatGuySkimpy
@ThatGuySkimpy 7 жыл бұрын
4/0 I believe
@garymccraw1466
@garymccraw1466 7 жыл бұрын
Do you use the pin in the 1/8 ounce Jig? I was just wondering
@ThatGuySkimpy
@ThatGuySkimpy 7 жыл бұрын
Gary McCraw the weedless pin? Yes I do when I make them. I don't make them often though. If I remember right, that size needs a smaller weedguard
@mariopadilla7508
@mariopadilla7508 7 жыл бұрын
What round bend hooks you use for this mold? I'm looking for a 3/0 hook for the 1/4oz and the 3/8oz cavities with out modifying mold.
@ThatGuySkimpy
@ThatGuySkimpy 7 жыл бұрын
Mario Padilla anything that's a 30* hook.
@mariopadilla7508
@mariopadilla7508 7 жыл бұрын
That Guy Skimpy did you modify the molds to fit?
@ThatGuySkimpy
@ThatGuySkimpy 7 жыл бұрын
+Mario Padilla no. Just cut the slit for the spinnerbait wire.
@ThatGuySkimpy
@ThatGuySkimpy 7 жыл бұрын
+Mario Padilla if you go to Barlows Tackle they have recommended hooks at the bottom of the page !!!
@mariopadilla7508
@mariopadilla7508 7 жыл бұрын
That Guy Skimpy thanks bro! I wanted to get the mustard 328886 3/0 for the 1/4oz and the 3/8oz but wasn't sure if it'll fit with out modifying the mold
@henrywarren5634
@henrywarren5634 6 жыл бұрын
How do you paint the spinner bait head?
@ThatGuySkimpy
@ThatGuySkimpy 6 жыл бұрын
Henry Warren check out my videos on the ultra minnow spinner jig and the buzzbait. I show how I paint them.
@FishingThePNW
@FishingThePNW 8 жыл бұрын
Dude, I need some 1 oz to punch through some pads!
@royhawes5111
@royhawes5111 8 жыл бұрын
20
@markdenneyjr.9866
@markdenneyjr.9866 8 жыл бұрын
can you still poor jigs after making the spinner bait adjustment? I'd love to see you make a chatterbait out of that same mold as well. awesome vid man!!! thumbs up!!!
@ThatGuySkimpy
@ThatGuySkimpy 8 жыл бұрын
Mark Denney Jr. yes you can. I have made chatterbaits with it as well. Just need to not put in the weedguard pin and need to open the eye a little to put on blade or you can just use 2 split rings.
@gonzasteve
@gonzasteve 8 жыл бұрын
do they make 1oz-2oz molds ?
@ThatGuySkimpy
@ThatGuySkimpy 8 жыл бұрын
Part # 3419 mold has a 1oz. That's the biggest.
Making some Do-It Molds Poison Swingtail jigs
17:34
That Guy Skimpy
Рет қаралды 24 М.
Random Emoji Beatbox Challenge #beatbox #tiktok
00:47
BeatboxJCOP
Рет қаралды 51 МЛН
龟兔赛跑:好可爱的小乌龟#short #angel #clown
01:00
Super Beauty team
Рет қаралды 120 МЛН
Миллионер | 2 - серия
16:04
Million Show
Рет қаралды 1,9 МЛН
Best Jig Mold? Making jigs with the Do-It Molds Poison Tail Jig Mold
10:53
EXPANDING MOLD POSSIBILITIES ~ Do-It Poison Tail Jig Mold
30:49
N2TW_customlures
Рет қаралды 15 М.
How to POUR your own JIG HEADS to SAVE MONEY (EASIEST WAY!)
10:47
Nathan Quince Fishing
Рет қаралды 44 М.
Making a $5 Fire Craw Chatterbait
12:41
The Bait Making Channel
Рет қаралды 13 М.
How to make SPINNERBAITS like WAR EAGLE!
6:00
Dishes and Fishes
Рет қаралды 7 М.
How to make Micro Bladed Jigs
10:19
N2TW_customlures
Рет қаралды 1,4 М.
Modify Your Poison Tail Mold to make Bladed Jigs!
25:42
SDG Custom Lurecraft
Рет қаралды 11 М.
Random Emoji Beatbox Challenge #beatbox #tiktok
00:47
BeatboxJCOP
Рет қаралды 51 МЛН