How to Make Kiss Cut Sticker Sheets with Cricut | Easy 2022 Version

This video shows how I easily make my kiss cut sticker sheets with a fully cut sticker backing in Cricut design space .
You can find the sticker paper I use at my Amazon Storefront under Cricut tools. (I do get a small percentage if you purchase after clicking the link with no extra cost to you.) www.amazon.com/shop/girlygrrl...
CONTACT: [e-mail]
pico.link/girlygrrlstyle
SHOP:
Vintage: poshmark.com/closet/girlygrrl...
Modern: Flowerandanchor.com
Hand-crafted: www.etsy.com/shop/Girlygrrlstyle
**************************************************************************
Visit my Amazon Storefront for the tools I use for sewing and to run my small business. (I do get a small percentage if you purchase after clicking the link.) www.amazon.com/shop/girlygrrl...
**************************************************************************
If you are new to Poshmark, use the code "Girlygrrlstyle" when you sign up for $10 towards your first purchase.

[@MaryJean312]

I am literally crying because i found your video!!! I have been searching forever on how this is done and found nothing. Either they leave steps out and want you to buy a program to learn etc. I have Lupus and I want to be able to stay home but learn an income as well. Thank you for this.

[@jovelasquez7312]

I couldn't agree with you more especially when one has a disability. I'm new at this and I need all the help I can get!

[@hersheyqueenlisa]

I have watched a ton of videos about using my Cricut and so far this one seems the easiest to follow. Bless you for helping us to learn.❤

[@allisonilene]

THANK YOU SO MUCH!!!!!! I don't have procreate, I don't have a mac, I don't have an ipad. I searched EVERYWHERE for this tutorial

[@forwkends]

Thank you. I have been making stickers for my planner for a few years. They came out die cut. I had no idea that I could do kiss cut sheets until i happened upon your video. The washi tape selection turned out to be too light a cut, but the sticky notes selection was perfect for kiss cut with my sticker paper (Staples). Again, thank you.

[@macarenamf81]

I spent almost two hours trying to figure out how to do this... I lost a lot of material in the process and THEN fortunately, I got to see your video! You have no idea how much I LOVED IT! Forever grateful =)

[@thecraftygrrl]

Thank you! I'm so glad it was helpful.

[@jovelasquez7312]

​@thecraftygrrl Thank you for sharing. I have a question but to afraid/embarrassed to ask it publicly. Is there another way to ask my question?

[@vanadydaniels416]

Your video was one of the best tutorials for making stickers. I've wasted a few sheets previously. THANK YOU! I LOVE the way you give step-by-step instructions.

[@juliehuddleston4283]

This video was GREAT! I just watched it, paused it, rewound it….and I did it! Such a good video! Thank you for my success!

[@francohen9685]

I found your video to be extremely well done. Very understandable. Clear. Concise. Thank you for sharing.

[@valerieh4280]

This is exactly what I needed! Thank you so much!

[@thecraftygrrl]

Glad it was helpful!

[@jestcy4205]

Cricut could just have a “Kiss Cut” setting and make things a lot easier. This is my biggest issue with this company. They make you jump through hoops just to do one step! 😡 Great tutorial on your end though thank you so much for sharing! ❤️

[@FullHouseFancies]

All vinyl and HTV settings are kiss cut settings. There are also sticker settings already in DS that are kiss cut. You may have to adjust the settings depending on the thickness/type of your sticker paper though. Test cuts are always recommended. 😊

[@lisalind4813]

use removable sticker paper as your material, it has always "kiss cut" for me. I use the actual sticker type if I want individual stickers cut through

[@besterz3127]

Yey now its a new feature of cricut beta desktop(mac, win) 🎉. Not yet on mobile though, which i am xd.

[@mznikicohn8346]

Thank you so much for this video. I would have been lost on how to do the sticker sheets. You video was easy to follow and I was able to make my own graphic background for my sheets. Again thank you so much

[@thecraftygrrl]

You are so welcome!

[@stwoods25]

Best video for a new person like me, very detailed and easy to follow. Thank you!

[@thecraftygrrl]

Glad it was helpful!

[@FullHouseFancies]

Wanted to share a few tips with you and hopefully save you a few steps 😊. After you attach your two “sheets” there’s no need to rotate them, DS will do that automatically when you go to the cut screen. Also, if the machine is going to cut your project, there’s never really a need to turn the bleed off, it won’t negatively affect your project. As a matter of fact, if it was left on, it would’ve helped in this instance because you would’ve seen that you hadn’t flattened one correctly because you would’ve seen the bleed around that one. Lastly, it may help if you create custom cut settings with the pressure/multicut you have found works for your sticker paper etc. That way, it’s easier to find and remember what settings are for what materials. Hopefully, some of that will help make things easier for you. Great video!

[@rachelbloomfield5230]

THANK YOU !! I've been wasting so many sheets of sticker paper trying to perfect the kiss cut, and this worked a treat ! YAY :)

[@thecraftygrrl]

Glad I could help!

[@paperplanner7878]

I've had a Silhouette Portrait 2 for years and my husband bought me a Cricut Joy Xtra for Christmas. Thanks to your excellent step-by-step tutorial, I've just successfully made my first kiss cut sticker sheets using Design Space 😊

[@thecraftygrrl]

That is so awesome! You'll never stop now. ;)

[@JustPassingBy_Yolo]

Omg thank you!! Finally, someone who did not use procreate. Much appreciated!! ❤

[@joycezavala3803]

Ohhhhh my goodness!!!!! This is beyond amazing!!! I’m sooo grateful for this!!!! Thanks for sharing!

[@AM-hz3jw]

We have tried in vain to make kiss cut stickers! It kept doing die cuts or not peeling properly, yadda. So happy to have found this video, I tried your settings, and omg, it worked!! Thank you so much.

[@Jayaluv854]

Omg!! Thank you!! Finally a simple tutorial without using all the outside softwares!!

[@StellasScrappyCrafts]

love the sticker on the cricut lid

[@_atloa]

Thank you so much! I think I found a tidbit of this video on TikTok so glad I found the full version very informative you seem to be very sweet I had a sticker business in the past but lost my mojo but you taught me again! Ty!

[@daniellegodley3021]

This worked like a charm!!!!!! Thanks for sharing Tory!!!!!!!!

[@emeryallison]

Thank you! I tried this on sticker paper (not vinyl) and it worked perfectly!

[@angiedinkins]

Fantastic tutorial! Stickers turned out perfect!

[@designsbyivyrose]

Thank you … I tried all three setting and finally found the perfect kiss cut for my vinyl sticker paper

[@srcreath6860]

You deserve all the pretty things! Thank you!

[@Sophia7421]

This is so awesome, thanks for the clear instructions I was so confused with other videos!

[@mildredsegarra587]

Thank you for sharing! I followed every step and it worked on my iPad Pro. Thank you! ❤️

[@seneritaliaina9139]

Omg thank you for this noone wants to show us how to make these, Im glad i found you thank you so so much lord bless x

[@veggiebernie]

Thank you so much for this video tutorial! I just got a Cricut for Christmas and figured out how to make stickers perfectly from watching your video!

[@thenatnatboy]

it's super professional, you did it!

[@Journal_Jonesy]

Thank you so much! I just followed along with your video and it worked perfectly! 🎉❤

[@Sooz-gh7fb]

Helpful thanks. Very similar process to what I use. I love the phrase on your Cricut machine, how true! x

[@betsybelart-vaia3064]

Wow! Thank you so much for your patient explanation- finally i know how ❤to

[@uinise5307]

Amazing!!! I’m so going to try out what you just shown new favorite crafty person you!! I LOVE!!!

[@AlaneLane]

Thank you for sharing! This is great!

[@hh-kl7zq]

Thank you so much for this thorough tutorial the setting did work for me! very pleased!

[@thecraftygrrl]

Yay! That's awesome!

[@setstudios3557]

The best tutorial on kiss and cut. Thank you

[@thecraftygrrl]

Wow, thanks!

[@kimsinspiredlife]

Excellent tutorial. Inspired to try!

[@kimsplacedesigns2315]

Great video. I've been struggling with cutting stickers out and the Washie setting worked perfectly. Thanks!

[@thecraftygrrl]

Glad it helped!

[@kerrie4075]

To the aussies and other countries that use metric system - change your settings to imperial - I was like why isn’t this working 😅😂. Awesome tutorial ❤

[@btea8046]

I just gotta say that I love your turtle neck 💖

[@jackiewoolard4359]

thank you so much!!! loved this video

[@destinyhutchinson7951]

Cricut is my medicine for ADHD helps so much for my hyper focus and overthinking moments lol

[@TwinFlameTreasures]

I love your hair style, so thinking cute

[@tanianunes1221]

Thank you for sharing 🙏🏻✨♥️

[@hajarulgaming9266]

thank you so much perfect video to learn.. i love it..

[@LoriMcKinnonArt]

SO helpful and I am grateful to learn something new today (with your help)! Thank YOU!! ENJOY! Lori 😉

[@thecraftygrrl]

Thank you!

[@nascar427]

Wow, I'm so excited that I saw this video. Presently I have a Cricut Joy, but will be buying a Joy Xtra soon.

[@lauraw9117]

Great video, thanks for sharing your method! 💜

[@thecraftygrrl]

You are so welcome!

[@Resell_crazy]

Thank you so much....ive been trying to figure out how to get a kiss cut to make sheet stickers....ordering them was way to much!!

[@TheShamwwow]

Awesome thank you

[@DerEchteNapster]

started with kiss cut stickers today.. your video helped alot.. thanks :)

[@thecraftygrrl]

Glad I could help!

[@angel_bern]

Thank you so much for sharing your ideas making stickers specially in making kiss cut stickers. I follow everything you do and guess what? I made it. Once again thank you❤

[@Mollydogdesigns]

OMG thanks so much ❤️❤️👏👏

[@saraarteaga2531]

Wow a video that finally makes sense! Thank you so much! Now I won’t feel so stressed about my Cricut now that I’ve found your videos. Is there a way to do these with a holographic laminate on top? Or would it not work to do a kiss cut?

[@thecraftygrrl]

OH that's a great question. Honestly, I haven't used the holographic laminate yet but I did just get some so seems like the perfect time to experiment.

[@ItGirlPrintz]

U can also do Cmd+d =duplicate

[@MrMrspriscillar]

I ran it 4 times with the square I think I can bring it down to 2-3 with a Cricut maker 3 in washi setting

[@jeraguevarra729]

Hello! i love this video

[@leenaabdel5363]

Great tutorial! So happy I came across your video!! Is that sticker paper waterproof??

[@thecraftygrrl]

This paper I used doesn't state that it is and I've found that it can smear so I'd look at getting a sealant or trying a paper that specifically is waterproof.

[@treathersuite]

Great information! What kind of printer did you use? Does it need to be an inkjet printer?

[@lauriemay5823]

Your instructions were the best!! After I've made them, how can I save the file so they'll be ready to print again?

[@mre9789]

Wow! This is exactly what I have been looking for. Thanks!

[@chloeeleanor3882]

Thank you so much for sharing this! It worked great. However, I can only print one sheet of stickers as Cricut doesn't allow me to print on a full-sized page. Do you know a fix for this? Thank you

[@phyllisdeluca2261]

This is great thanks for sharing! My Cricut didn’t cut the rectangle all the way through. I added a laminate on top before cutting. Do you think if I do more pressure it you’ll work?

[@thecraftygrrl]

It should. I haven't used a laminate yet but have thought about adding it to make them last longer. More pressure should definitely help cutting through though.

[@chelseawynne6844]

So when you did your images in design space, did you do the contour and flatten and then add it to your sticker backing? Also when you added them all to your sticker backing, did you flatten that as well or just attach?

[@dollyhamilton6702]

Thank you for this video. I so wanted to be able to do this. I’ve made stickers with just print and cut but really like the kiss cut method. Problem…when I went to cut, my maker would only cut around the “square” and not the stickers. I tried 4 different things and finally just deleted the square part and sent the stickers to cut and that worked ok, except they cut thru all the way…no kiss cut😒. Wondering what step I did wrong that the stickers themselves would not cut? Still need to figure out the “sweet spot” for the kiss cut. This washi sheet selection didn’t cut thru the sticker paper even after 3 times!

[@kris7200]

Try using the washi tape setting. That will make them just peel off the sheet

[@margaretmurph3609]

Enjoyed your video where did you find the stickers?

[@thecraftygrrl]

Oh I made them in Procreate. :)

[@dysont002]

A fantastic video. I am going to try this. But I don't see the link to the type of paper used. Could you tell me the name? I am having trouble with my inkjet printer & sticker paper. It wants the paper side of sticker paper to be face down. Any clues on how to change that?

[@user-fz7ms9ds6y]

Can they be laminated for turning them into waterproof stickers?

[@Cutiedoki]

How we're you able to cute the rectangular shape and not print the pink color? I'd been wracking my brain how to do it but to no luck. Thank you again!

[@creatingwithyana]

How do you get the background to print that pink color instead of just white?

[@IamRAEdiant]

i dont understand when you mentioned about the offset of the sticker design... and when everything was cut, i dont get when you said abt you forgot to flatten the other sticker sheet. etc. could you explain further pls . thank you

[@pattyknox517]

Where did get your designs from I like them

[@thecraftygrrl]

I made them in Procreate and Canva. :)

[@joerollings6219]

What size do you make your stickers images?

[@karenmoore5669]

How did you do the 8 layers?

[@kellybond3383]

Amazing video. I have been trying so hard to do the backing sheet. One question? If I wanted the backing sheet with my name etc on would I just change it to a print then cut rather than a basic cut?

[@thecraftygrrl]

Yes that should work.

[@brandievaleri2911]

kzbin.info/www/bejne/Y3bdd2ppoMmiqNE Not sure if this is what you’re asking

[@TheRealCardoso]

How do I do this if I want to add a background to my sticker sheet instead of leaving it all white?

[@nascar427]

I love where your brain takes you.

[@thecraftygrrl]

Thank you! hahah It's truly all over the place at once.

[@Bluerose05711]

what size are the stickers?

[@user-bx9wi9zg1o]

You’re a genius! I’ve wasted so much material trying to make kiss cut stickers for my tumblers🤦🏼‍♀️ However, why is my pink backing square printing?? Please help me😭

[@gdelaoneira]

I am having lots of problems with bleeding ink 😕 on the stickers when it comes out of the jet printer... any advice? Please 🙏 anyone

[@ladys702]

Having trouble can you do a video designing the stickers in design space from start to finish so I can follow step by step

[@thecraftygrrl]

Hi there, I'd be happy to. I'll add that to my list of videos so be on the lookout.

[@ladys702]

@@thecraftygrrl good evening thank you I will definitely be looking out. I was also trying to follow with the sticker sheet but no luck

[@bresunflower]

Great tutorial!! It's literally the only one that has worked these last couple weeks I been trying. The only issues I have is that it cuts the 2 squares perfectly (besides leaving a small white part of the paper exposed, but I think that's because I should've left the bleed on), but it didn't cut the 2 boxes down the middle, so it left it as one square. Another issue is that it didn't cut the actual designs out into stickers, so I just have one big square as a sticker instead of cutting it in the middle and making individual stickers lol. If anyone can help with this, it'd be very much appreciated.

[@DivaLike]

Hi, I'm having the same issue with it not cutting the individual stickers, did you get an answer or get it figured out ?

[@bresunflower]

@@DivaLike hey no I didn’t yet. I stopped trying after awhile but I’m going to retry once I’m done moving in the next week and I’ll be sure to let you know how it went!

[@DivaLike]

@@bresunflower ok, thanks for responding. I tried what another person said they did which was remove the background and it printed perfectly.

[@bresunflower]

@@DivaLike remove it right before I send to printer or right after I line them up in Cricut design space? I tried so many ways including changing the paper used and it was so frustrating

[@DivaLike]

@@bresunflower Yes after you get them how you want them to be arranged then remove the background and then send to printer.

[@sharonaheijnen916]

Hello, can you also insert an entire sticker sheet that I have (from google) into Design space? :) So I mean an image of a sticker sheet.

[@jennicormack9811]

Great video ! Just a question 🙋🏻‍♀️ everything cut as it should be the problem I had was the sticker’s didn’t cut properly, they were off if that makes sense, my Cricut cut them off centre. Could anyone shed some light on this please ? 😊

[@thecraftygrrl]

Oh yes, I have that happen all the time. To fix it I have to recalculate my Cricut...there is a whole process where you print out a sheet to use and align the registration marks to get it to realign.

[@danadraghetti8674]

I just tried this and my first attempt I didn't flatten and it began cutting parts I didn't want cut. Second attempt I flattened and it only cut out the outer rectangle. Third attempt I flattened only the stickers but not to the background and it said it could cut. I'm at a loss :(

[@FullHouseFancies]

You would want to flatten each sticker individually and then attach them to the background.

[@gabbysade6477]

This is how u do it: 1. Place ur image down that u want to turn into a sticker (I recommend doing one image at a time when putting multiple stickers onto per sticker sheet/sticker backing) cuz it’s easier that way! 2. Click on “offset” to put the white sticker outline over your stickers (I recommend putting the offset on 0.139) that number works the best for me:) 3. After that, click & hold down on your mouse to highlight over the sticker. Click attach & THEN flatten. (I think she mentions those tips in this video as well I believe) 4. Size down the sticker to your desired size or to fit onto your sticker backing. 5. Repeat these steps for the rest of your stickers that you choose to put onto your sticker backing & then size all of them down to get them to perfectly fit onto your sticker backing. (Watch this video again to learn about the dimensions for the sticker backing/sheet & how to place the stickers successfully on there. 6. Lastly, print the stickers out & then let ur cricut cut it out & ur done!! I really hope this helps💕💕💕

[@MiniMeags]

@@gabbysade6477I’ve done all these things and it’s still only cutting the rectangle :[

[@gabbysade6477]

@@MiniMeags maybe you didn’t click on the option “print then cut” before u even make the stickers. Did u click on that option? Cuz “print then cut” is what prints & cuts out the stickers successfully

[@Sophia7421]

How do you do the custom printing on the sticker sheet itself, I can’t seem to find any tutorials that are helpful

[@thecraftygrrl]

Hi Sophia, would you clarify your question? Thank you.

[@manuelaglade6900]

When I go print the background color disappears and only leaves it white. Any idea what I am doing wrong?

[@withcuratedjoy]

I don’t have that shape .. just the regular square… should that make a diff ?

[@thecraftygrrl]

You can totally just use a square. I like the look of rounded corners. So weird that your design space doesn’t have it.

[@kerrividler6571]

Is there a video on how to add stickers from the beginning at all?

[@thecraftygrrl]

Hey there, are you looking for how to make stickers or upload them to Cricut design space?

[@kerrividler6571]

@@thecraftygrrl how to upload from scratch and do the steps to get the kiss cut method

[@thejohnnymayeffect6638]

how do you get it to not cut ever detail withough Flattening? You didnt have yours flattened. But mine I have to.

[@adriennehonore8484]

You have to flatten to cut stickers. She ended up mentioning toward the end that she forgot to flatten a few.

[@mehrua723]

Hi!! I followed these steps but the cricut did not cut the actual stickers? Where did I go wrong 😭

[@jhebert3022]

When I printed my sheet. It printed the box around. You didn’t say where or not you hid the boxes.

[@lisalind4813]

I just use "removable sticker paper" for my material. Never cuts through.

[@user-rj2tz7te7i]

I tried it and it won't cut the stickers only the outline 😭

[@alyssalopez615]

i’ve watched this so many times but my cricut only cuts out the border (background) of the sheets and not the actual stickers, i can’t figure out what i did wrong

[@alyssalopez615]

turns out it’s a lil different on the ipad omg…messed around and figured it out :)

[@emilyalmonte6150]

How did you figure this outttt

[@alyssalopez615]

@@emilyalmonte6150 before you attach ur cut image to everything else duplicate your cut image aka the layer that will be cut to make ur sticker shapes, click edit, set it as a cut layer, it’s gives you an option to make it a color it can be any color since it will be hidden, then send that layer to the back and then attach everything. check in ur layers n it will be named cut layer, or if anything it’ll be named something w the word cut in it. mine says basic cut for me :)

[@alyssalopez615]

@ around 8:46 in the vid she adds her cut image (the sticker shapes that will be cut) and she sends that to the back, for the ipad you have to duplicate your sticker cut image (set is as cut ) and send that to the back, the other sticker cut image will remain on top and the stickers will cut out !

[@shannonroberts7242]

Before you added your stickers to sticker backing, how did you attach the offset to your images?

[@FullHouseFancies]

You would flatten your images to the offset.

[@JMarylin88]

Hello, what's the point of duplicating the background 8 times ? Thanks for your video !

[@thecraftygrrl]

Hi Julie, since we're using a light cutting selection (washi) we want to make sure the machine is kind of tricked into cutting all the way through with multiple passes.

[@JMarylin88]

@@thecraftygrrl ok understood :) thanks for your reply

[@Jagthunder1]

@@thecraftygrrl Why not just use a setting that makes one pass and doesn’t cut through the backing? I use light card stock for my printable vinyl and it’s one copy, one pass.

[@thecraftygrrl]

@@Jagthunder1 I haven't had luck with that but if you can get that to work it sounds even better!

[@Jagthunder1]

@@thecraftygrrl Yeah, I mean I thought that was what the "pressure wheel' and materials setting was for? So you can adjust how much pressure was needed for the type of material you were using? I'm new to this so still learning.

[@user-fz7ms9ds6y]

Haha I also am in to way too many crafts and ADHD brained