How to Make LED Chip Welder Remover PTC Heating Soldering GA Station 220V 300W

How to Make LED Chip Welder Remover PTC Heating Soldering GA Station 220V 300W
Materials Required:
1. Aluminum Composite Sheet
2. 20mm Plywood
3. Aluminum Angle Bar
4. 220V 300W LED Remover PTC Heating Soldering Chip - bit.ly/3ex0WsZ
Specifications
Color: Silver
Power: 300W
Voltage: AC 220V
Material: Aluminum + PTC
Size: (L)X(W) 120x70mm / 4.72''x2.76''(appr.)
5. Corner Bracket 16mm x4Pcs - bit.ly/3z9ENIW
6. Power Cable 230V AC - bit.ly/3zbC41M
7. Heatshield Tape - bit.ly/36Gvjc2
Subscribe LahisTech: bit.ly/2JHtlyc
Subscribe for more future creative project videos.
Thank you.
#ledchipwelder #ptcheating

[@wingselectronics]

Hi love from India

[@naturescreater1390]

Dil se baiya thanks

[@andreasama9659]

hello friend, how could I clean the plate from the encrustations that are created by welding the LEDs

[@ManojSharma-xs7im]

Cool

[@RolletUA]

very useful device

[@electronic7979]

Super 👏

[@jabedrayhanashik6070]

Hello. Is this heater machine Made in India?

[@gautamgobind]

Kahan se plete liye ho bhai

[@Yorumcu63]

great video

[@vijaysharma-ww3ij]

हर जगह कोनसा पार्ट मिलना है वह सच हैं गलतियाँ बधाई शुभकामनाएं भैया जान पैदा हुआ है जिवन रूपए देने बाद पुतिन चिन निती

[@boybravo689]

What is the wattage of the heating element did you used tnx sir

[@davidbolha]

300 W

[@sddiymakeitworthit7512]

Super job

[@joaopaulo-dp9vd]

Olá que fita é essa que vc colocou antes do termo retrátil?

[@renatolima3475]

Fita de alta temperatura (fita Kapton)

[@xylosfurniture]

Sorry but I have a couple of questions. 1. Can't you do it with a regular hot plate? 2. Why would you want to remove the LEDs in the first place?🤔

[@nchannel407]

Mujhe chahie kaise milegi bolo Bhai

[@maximoramirez95]

Donde puedo consigir esta piesa nesecito ya

[@kingofcomedy6017]

How many watts is it?

[@davidbolha]

300 W

[@diamondyara9535]

Y kha milega

[@HappyLife-S2A]

Rs kitna mereco 1 milege

[@ramaswamyranganathan9171]

temperature how to control?

[@cfusername]

A PTC element will balance itself, because the resistance changes with the temperature. Usually about 260-270 degrees celsius. If a lower temperature is needed, there needs to be some kind of control loop using a sensor and a means of switching the PTC on and off.

[@Surya-uv3bz]

sir if i want to heat nearly to 700 Centigrade is it possible with a small plate of around 5 *5 cm ?? please reply sir.....

[@davidbolha]

This only gets to 200 °C

[@GiorgosVrakas]

This is dangerous! You need ground.

[@LahisTechLT]

Neutral line is grounded from MCB.

[@erynaelisya696]

​@@LahisTechLTwhat about 2 red wires from hot plate,i dont know how to connect to the switch cable that have brown wire and blue wire..please help me

[@Kakagaming272]

Hiiii

[@MsAxelfoly]

100 degrees is definitely not enough to remove the leds, it should be 400 degrees

[@Elektrotechniker]

That thing gets hot AF - His cheapo room temperature sensor is just rated up to 100°C. I can tell you it's gonna work! Just the missing PE (Protective Earth) makes me uncomfortable, so I suggest adding one by screwing it between the plate and one of the feet to prevent accidents!

[@ManhNguyen-gr2jm]

Hj

[@memyselfandi6422]

LahisTech - on your youtube homepage it says that your location is Australia yet this electrical socket plug 7:25 is not for Australian electrical sockets, so why did you list your location as being Australia when you clearly don't live in Australia ?