How to make pad printing plate

Рет қаралды 154,435

ENGYPRINT

Күн бұрын

Пікірлер: 49

@alikhojastehtabar7938 Жыл бұрын

What’s the chemicals you use? I mean whats the sensitive fluid and the developer fluid and others

@NatureAndTech 4 жыл бұрын

How deep are the etched areas?

@crispychicken2743 Жыл бұрын

Less than 1mm

@stefanweigel6593 3 жыл бұрын

I am using Etchcut machines from past 19 years, I can say that this machine cannot give that much of precision, First the photo ink that you use should not be transparent, so that you can easily find pinholes, machine oscillation is not with accurate speed and angle, thirdly with this machine I am sure you cannot go deep, We use Nano Crafter technology from Etchcut is far more advanced and serving us well, if anyone need any technical help for making pad printing plates, you can ask me.

@crispychicken2743 Жыл бұрын

This is to long and too much work . Laser is only 3 minutes with out chemicals and perfection every time.

@GameAGuy 2 жыл бұрын

You don't put in oven after air off the plate goes to uv and finishes in oven?

@ebeljoy2343 Жыл бұрын

What's the difference between chemical etching? Why can't you simply print negative and etch the positive and fill ink

@alisoroush1985 3 жыл бұрын

if you used photosensitive ink then why did you use photosensitive laminate too (see sec 2:37)?

@teofredojaducana5171 2 жыл бұрын

Do you supply photosensitive Emulsion and developer that has no methyl cellusolve acetate and ethoxyethanol. thanks

@GameAGuy 2 жыл бұрын

So the exposure of the image film should be the same time as the screen?

@gnimiyluo3184 2 жыл бұрын

Welcome to contact us engytech.en.alibaba.com/?spm=a2700.galleryofferlist.0.0.11563e778tXtaV

@pankajbhatia7580 3 жыл бұрын

How many price for this pad printing plate?

@IamMagPie 3 жыл бұрын

Shouldn't the operator be using gloves to protect the plate from fingerprints etc.?

@AchillesWrath1 4 жыл бұрын

I saw a lot going on but i didn't understand what was happening or the process at all.

@AhmetOzbayy 3 жыл бұрын

You probably now know what happens but I'll try to explain for others. At first step, they coat the metal plate with a photosensitive solution to create a photosensitive layer on it, we'll come back to that in a second. After the coating, they apply a heat treatment, this helps to fix the coating onto the metal. What photosensitive means that when you expose that layer to uv light, the light will interact with the layer and create a dent on it. The process is called photolithography, a very important technique which is even used in the making of the processors of your computer. So, if you only expose a specific shape to uv light on that photosensitive layer, you'll end up with that shape printed on that layer. In this case the black parts on the paper allow uv light to go through and create dents on the photosensitive layer while the rest of the paper doesn't allow the penetration of the light, so the rest of the layer stays still. After that, they wash the piece to get rid of unwanted pieces and contaminants that may have resided from photolithography process. Then, they etch the metal plate so that the shape dented on the layer would be dented on the metal plate itself. Since the layer is already dented the etching agent acts more on there and reaches the metal plate and start denting it. After that, they wash off the remaining photosenstive layer as it completed its task. And at last, they check if the dents on the metal plate has enough depth.

@JackieSunshineOmega 3 жыл бұрын

@@AhmetOzbayy Thanks for the explanation. But is it the same as a Presensitized PCB?

@hoppermind 8 ай бұрын

Muje printing plate chaiye kitne me banta he ?

@Dzuzeppo 5 жыл бұрын

how much cost to create pad printing plate by you? thanks

@engyprint8614 4 жыл бұрын

hi, may I have your contact? Or you can add my wechat+8618076760134

@kishoresoni7917 3 жыл бұрын

Sir, Can you tell me which photoemulsion coat you use here. Give thorough explanation about product name and from where can we buy .

@siddharthakapoor1 3 жыл бұрын

kzbin.info/www/bejne/Y5KWoqecl7ONnJo

@stefanweigel6593 3 жыл бұрын

Use Etchcut coating, these are made in India, much better in terms of resistance and exposing quality, you can easily find them on google " Etchcut International"

@kashifjewellerymanufacture1626 2 жыл бұрын

Sir please tell me the positive sheet name

@monmoon3931 3 жыл бұрын

You can make by leaser CNC machine??

@siddharthakapoor1 3 жыл бұрын

kzbin.info/www/bejne/Y5KWoqecl7ONnJo

@Mr_Chuckles Жыл бұрын

Sheesh, would it not be easier to just use a fiber laser?!

@AlexandreSatoserigrafia 4 жыл бұрын

Onde vende esses produtos para revelação ?

@siddharthakapoor1 3 жыл бұрын

kzbin.info/www/bejne/Y5KWoqecl7ONnJo

@isidoromaich7226 5 жыл бұрын

Instructions not clear. How many machines? I'm sorry, but my english is perfect

@timothyhofer6967 4 жыл бұрын

Hello I enjoyed the video, I thought I had some old tech.. I'm using a newer uvac 600 but am worried my design etches aren't deep enough. Maybe longer times? Or the chemicals during wash process? Any advice helps. It could be in the print end but having so many problems I'm going back to the start.

@stefanweigel6593 3 жыл бұрын

We are using Etchcut machines from past 19 years, you can buy Nano technology from them, its more advanced and you can easily achieve depth, we are in pad printing last 40 years

@MrOner07 Жыл бұрын

"how to etch metal" should be the title... this is not pad printing

@sergaandd2183 4 жыл бұрын

Size and thickness of plate is different in the video.

@stefanweigel6593 3 жыл бұрын

exactly , even machine does not have chemical because color of chemical is brown so this plate is not made in this machine and cannot be made in such a small machine