HOW TO MAKE POWER BANK - DIY

[@ayahsadam9817]

Perpect and great sharing

[@eulogioramirobarrosomachad5155]

Al preparar la batería¿Se pone directo a la la moto para el motor de arranque?

[@SimpleLife-h3x]

How many 18650 batteries can we connect like this for this board?

[@Devansh_Projects]

Hlo plz reply can i use 4batteries of 2000MAH for this?

[@MrSM-ui4zj]

Yes.

[@sharukhmatekuki5830]

Good hit 👍👍 🇮🇳 || Kuki

[@janitha7367]

Voltage අසමාන battry 2k demmata kamak nadda

[@hassanhalilu9168]

Good luck my dear friend and family

[@reztime2825]

Can I add more batteries for the same board ? and what should be the maximum number of added batteries ?

[@MrSM-ui4zj]

Yes, sure. Any number. Then the powerbank charging time will be increased. Thanks.

[@mizanrahman-v2d]

সানফর্ড কোম্পানির লিথিয়াম ব্যাটারি দিয়েই পাওয়ার ব্যাংক বানানো যাবে কি

[@chotkuk8135]

Sar is module Mein 3.7 volt 2 ampere ki battery Lagane se ya module kharab ho gaya what is the reason

[@MrSM-ui4zj]

Module is not genuine.

[@akhilakhil4585]

How may times use power bank bro

[@sin8004]

whats the name of the wire please that are connected to the batteries idontknow what its called

[@depaul-stdvi9989]

Can we charge the powerdank and charge my phone at the same (Does it support passt through charging, two way charging) plz tell i want to buy this powerdank circut, and nice video

[@tahayt6142]

I have a 2600mah battery in a 1 power bank that I modded changed the battery but now it charges way too hot??

[@MrSM-ui4zj]

You can replace the power bank module with a 2.1 A power bank module. I hope the problem will be solved. Thanks .

[@somamondal2451]

It gets very hot when charging the battery and mobile... Is it normal?

[@MrSM-ui4zj]

Battery will warm up. not verry hot but the module will get hot. Thats normal condition. Please check connection. Is it the same module?

[@somamondal2451]

@@MrSM-ui4zj yes... its the same module that you are using.

[@edwardcole7288]

How many battery is advisable to use on the board

[@MrSM-ui4zj]

Change the module with a better one and add more cell in parallel. It is for verry beginner. We should use BMS for each cell actually. Thanks.

[@andrieabellada6993]

Can a solar battery can be used

[@MrSM-ui4zj]

Battery should be 3.7 volt and rechargable.

[@AzharFm]

​​@@MrSM-ui4zjsir this module me can i used to lead acid 4 volt battery is to ok or not

[@mohdfarooq6429]

Bhi ye module kahan se le sakte hein

[@MrSM-ui4zj]

Local market me e milta hay avi. Boliyega dukanme iska nam powerbank module. With display vi milta hay. Thanks.

[@mohammadfaisel2898]

How to make power benk with 12v solar charger??

[@delossantosmarkraivenc.4965]

Hello! Can I use battery holders for this project? Sorry if I'm being ignorant but I really need ot for my research study. 😭

[@mousecursor0]

Yes and you can use any 3.7-4.2v battery

[@Dhavalgangadia]

Charging bord kitane paisha mein atha hai bhai

[@MrSM-ui4zj]

Rs.80 /- in local market. Thanks.

[@stephensiyanga5543]

Can I put batteries of different mah in a power bank?

[@MrSM-ui4zj]

It will work but lower amp cell may be heated.

[@-Deep-Singh]

Sir, how much time it charge mobile ?

[@MrSM-ui4zj]

This is 6600 mh powerbank. After it full charged a smart phone can be charged one time. Then you should charge it. If you connect more cell in parallely the power wil be increased. Thanks for your valuable comments.

[@-Deep-Singh]

Thank you so much sir.

[@jefflegend456]

How much volt does your battery release before being converted to 5v?

[@MrSM-ui4zj]

3.7 volt before convertion. Because all cells are connected in parallel. Thanks for your valuable comments.

[@clintestood5839]

Fantastic job

[@MrSM-ui4zj]

Thanks.

[@rndm9087]

its a power bank...but dose it charge? because if not then its a one time use

[@MrSM-ui4zj]

Yes it does charge. Thanks for comment.

[@kashifSiddiqui1122]

Bro isme battery protection hai

[@MrSM-ui4zj]

Battery protection module me hay.

[@RainbowPlayzo]

Hi sir, how do i know when the battery are full?

[@MrSM-ui4zj]

When the battery will be full charged the red light will be changed to green or blue. Thanks for comment.

[@wardankakhi4294]

@@MrSM-ui4zj I wen the Powerbank on the Smartphone the Powerbank get Out. My charging Module ist with a small black Button.

[@ssstudio1675]

Super bro..

[@MrSM-ui4zj]

Thanks.

[@abdulrosidin5181]

Mantaaaaaap salam dari BOGOR INDONESIA Mr

[@mohammadazizulhaque324]

Dear Sir, why green light turn off after few second battery connecting.

[@MrStyle-sr1yv]

add more usb on same battery ?

[@MrSM-ui4zj]

Yes u can do that. Thanks.

[@MrStyle-sr1yv]

@@MrSM-ui4zj it doesnt work actually they go on and off when charging..unstable..do you know how i can connect them for example 4 pieces on 1 battery thank you

[@MrStyle-sr1yv]

@@MrSM-ui4zj want to make a 4 port diy powerbank

[@ABRAHAMAUDU-h3u]

Very good

[@vbnaidu17]

Hi can we use this for led lights if how meny cells required please gide me

[@MrSM-ui4zj]

At first we have to know what type of led light we shall use and what is the maximum wattage of led light.

[@vbnaidu17]

@@MrSM-ui4zj I want 30 v are below 6 lights

[@delossantosmarkraivenc.4965]

How many hours can it charge before being lowbat? And how many hours should I charge this powerbank?

[@delossantosmarkraivenc.4965]

Please reply. I really need it for a project 😭

[@MrSM-ui4zj]

Red light will be changed to blue or green when it charged fully. Thank you.

[@delineanteitor1]

Hello. My problem is that when I am charging the cell phone after 10 seconds the charge is cut off and you have to disconnect it and reconnect it. What is the cause of that? can this protection be bypassed? Thank you very much

[@MrSM-ui4zj]

The module is weak and over heated. It may be defected. Try with other one.

[@delineanteitor1]

Thanks for your answer. Cheers

[@Harry001by7]

Data sheet of 18650 cells ?

[@arifanjum3336]

How can I know that the battery is full?

[@monipallavdutta]

wait till the battery explodes

[@manofculture2920]

​@@monipallavdutta🤣

[@camptech3397]

How much time does this module take for charging 1battery

[@banduladharmakeerthi7308]

පැයකට ආසන්න කාලයක්

[@sarwarhossain3069]

বোগদার ঘরের বোগদা এটা করতে এত সময় লাগনি?

[@aijazahmadpunjabi4549]

Can i use Lithium polymer batteries of 3.7 volts?

[@nightwolfch]

yes, but don't overcharge

[@haridas4676]

Use solder paste for conucting bateri

[@MrSM-ui4zj]

Thanks for sugestion.

[@kiracom55]

انت حيل في شغلك 👌😂

[@komgaming457]

Can we use 8000 mah battery for this

[@MrSM-ui4zj]

Yes, of course. Thanks for comments.

[@ahmadjod1726]

Thanks for this video but you do not tall us What is the name of this piece and can it charge 3 lithium batteries connected in parallel.. ?? What is the charging current ..??

[@MrSM-ui4zj]

When few cells are connected in parallel the voltage will be the same but the ampere will increase. Module name: power bank module. Thanks.

[@lotfibenamor7195]

12 volts je pense c Bcp pour un téléphone et le module aussi merci

[@mohamedhussein9449]

I had two of these modules and I lost them because they heat up so quickly during charging and even when they are connected to the battery. What is the reason for the problem

[@MrSM-ui4zj]

May be the modules were supplied to you were defected or there are something wrong in your connection. Thanks for your valuable comments.

[@urjitbhavsar3048]

Sir here is one of my videokzbin.info/www/bejne/rWisaaeij8xphdE about a complete review of this module. You may find an answer to your question. Thank you.

[@kirtimishra6191]

Connect B kit ki keemat kya hai.

[@Fox15-q5w]

Watts and amps of the modul?

[@MrSM-ui4zj]

6.6 Amp hour. watt=30.

[@wardankakhi4294]

@@MrSM-ui4zj Hallo. Ich habe folgendes Problem. Wenn ich diese Powerbank (vollgeladen) an das Handy stecke geht sie aus.

[@user-SA579]

Good

[@ichaaulia1257]

Bang untuk 1 modul powerbank bisa angkat berapa buah baterai trims! 🙏

[@manojcs6260]

What was the discharge amperage of the module

[@MrSM-ui4zj]

1 amp (max). Thanks for comments.

[@drsanjaygaikwad80]

Nice n easy

[@MrSM-ui4zj]

Thanks.

[@vsleboss]

18mn for 2 wire and 3 battery 😱

[@shubhankarghosh]

Depends upon the load and charging current

[@amitrathaur68]

Iske is problem ka Hal hai to batao

[@jefflegend456]

For example I used 3.5v battery, does it will be converted to 5v output using the power bank module?

[@MrSM-ui4zj]

Yes sure. This module can do this.

[@kp.baskaran823]

how much houre we want to charge

[@MrSM-ui4zj]

3 to 4 hours. Thanks.

[@dairopena3446]

Buenas noches mira es que tengo un módulo TP4056 este me sirve para cargar 3 baterías igual como en el video, un saludo desde Bogotá Colombia Dairo

[@delossantosmarkraivenc.4965]

Why isn't it working for me?🙁

[@delossantosmarkraivenc.4965]

I did everything like you did though 😭

[@MrSM-ui4zj]

May be the module is damaged.

[@dungkhc8759]

Cai j2 nay con hok

[@mustmust5989]

what the name of ic?

[@MrSM-ui4zj]

The module is available in the market.

[@tanmaydhandale4489]

The Module Is Available On Flipkart & Amazon Too

[@sathiyarajc7691]

Useful video..

[@MrSM-ui4zj]

Thanks.

[@maatiraouki9124]

excellent

[@kramerfink3089]

Nice video but horrible cold welds

[@MrSM-ui4zj]

Thanks for comments.

[@b.r.smarandi7102]

battery name

[@MrSM-ui4zj]

18650 battery 3.7 volt lithium ion Rechargable. Thanks for comments.

[@sajibanwar9390]

It do charge the battery but apms are too low around 100-400ma

[@AkhileshSharma-sz9tm]

इस मॉड्यूल से बैटरी को चार्ज करने में बहुत ज्यादा समय लगेगा क्योंकि ये मॉड्यूल बैटरी को चार्ज करने के लिए 0.8Amp ही सप्लाई देती है।

[@deepamaurya9925]

Bhai maine 8 batter lgai mgar nhi bna Single usb thi please give me reason

[@MrSM-ui4zj]

All batteries should be connected in paralel and you need a power bank module which is available in the local market. Otherwise a single usb will not work. Thanks.

[@احمدزينهمسلامه]

اخي من اين اشتري شنبر تجميع البطاريات اللثيوم

[@rohitsahani373]

Hum maximum kitani battery use Kar sakate hai

[@MrSM-ui4zj]

In parallel connection any number of cell can be added. Thank you for your valuable comments.

[@urjitbhavsar3048]

Sir here is one of my videokzbin.info/www/bejne/rWisaaeij8xphdE about a complete review of this module. You may find an answer to your question. Thank you.

[@sanketwani1391]

Can you charge and discharge simultaneously

[@MrSM-ui4zj]

Yes. But not recommended.

[@abhay7501]

Don't waste your money & time this module is suitable for charging keypad phones with connected one battery on module or you try like this shoen in video it is not working & module is damaged 😊😊

[@sonnyburnett2586]

Podré cargar 8 pilas así en paralelo con ese circuito tp4956 ??

[@dhanushdevadiga23]

Up to how many mAh battery is this supported sir??

[@MrSM-ui4zj]

Any. But all batteries should be same. Thanks.

[@jagseer_machenical]

charge kitna time is power bank ko

[@MrSM-ui4zj]

1 hour approx.

[@jagseer_machenical]

@@MrSM-ui4zj thnx bai

[@infantedelamarina8098]

Ay va a amanecer cargando porque lo primero las baterias tienen que mantener la carga de 4.2 voltio lo segundó el modulo de carga tiene que alterar la corriente de 4.2 voltio a 5.1 o 5.2 o5.3 pero ay modulo que en ves de alterar a esa sifra se mantiene en 4.2 voltio yo fabrique uno con 5 baterias en paralelo y me da 2 carga de 0 a 100 y una de 0 a 25

[@MrSM-ui4zj]

English please.

[@Melfy.Junior]

Podría pasarme el que fabricaste?

[@infantedelamarina8098]

@@Melfy.Junior fíjate hermano el que ise se lo di a un amigo pero conseguí un módulo reciclado igual la baterias recicladas pero en buen estado las cargué las pilas y durante un mes mantuvieron la carga en 4.2 voltio las agarre y las conecte en paralelo explicaba que ay modulos que en vez de subir la corriente de 4.2 a 5.2 algunos llegan a 4.4 no es suficiente el que arme fue reciclado todo y perfecto trabajaba pero lo regale hermanó

[@azkaputrakreatif]

Pada waktu di pakai mencharger hp gk lama kok indikator menyala kedip** crpat kira** kenapa bang yah ?!..

[@मनीषकुमार-ठ3ल5ठ]

Thank you

[@MrSM-ui4zj]

Welcome.

[@JavedKhan-jl3cs]

What is name of dvce I like it verygood keep it up

[@MrSM-ui4zj]

The name of device is '3.7v lithium ion battery charging module.' Is available in the market. Please serch in amazon and flipkart. Thanks for your valuable comment. If any problem write in comment box.

[@AbdulRasheed-sp6oe]

Main ne module lia is k ooper or neeche donon side per battery ka positive or negetive hai main kis k sath battery attach karoon

[@jatinrathod7376]

Dono ek hi he

[@staryi5119]

Температура микросхемы ht4928s достигает 65 градусов Цельсия - аккумулятору будет плохо.

[@infantedelamarina8098]

No usa fundente ni fluk para que agarre el estañó pobre y ese modulo tp4056 es maleta no sirve el lee la carga pero las baterias quedan en un 25%

[@MrSM-ui4zj]

English please.

[@electrologgy5942]

MR SAM. PLS REPLY HOW MUCH BATTERY WE CAN CONNECT TO THE CHARGING 🔋⚡MODULE PLS TELL.... THANKYOU🖤

[@MrSM-ui4zj]

You can add any number of cell in parallel and you can increase the mAH of the powerbank.

[@electrologgy5942]

@@MrSM-ui4zj ok thanks

[@maatiraouki9124]

شكرا جزيلا

[@MrSM-ui4zj]

Please write in english. Thanks.

[@issadon7990]

I try it 1 cell it very hot

[@KHariKHari-fe7cf]

I make but not working

[@MrSM-ui4zj]

Power bank module may be defected. Try with other one. Thanks

[@banduladharmakeerthi7308]

සියල්ලටම කලින් ඔයා හොඳ බවුත් එකක් ගන්න ඔයා පාස්සන විදිහ දැක්කම එපා වෙනවා 😊

[@shafiquemirza5960]

Mera mobile 10minite main 1℅ charge ho raha hai kiya ho sakta hai

[@MrSM-ui4zj]

Battery purana hay to change korna porega. Charger ka usb cable me kuchh garbar ho sakta

[@shaikhamiruddin5848]

5 minuter video ta boka 18 minute lagiye diyeche.👎👎👎👎

[@dwippramanick535]

Can I use this module for 4 batteries

[@MrSM-ui4zj]

You can increase any number of batteries. The connection will be kept the same. Thank you for your comment.

[@urjitbhavsar3048]

Sir here is one of my videokzbin.info/www/bejne/rWisaaeij8xphdE about a complete review of this module. You may find an answer to your question. Thank you.

[@indranilkundu1759]

Aisee mat rakho circuit ko battery ke upor....... Bohot heat generate karta he...... Ye battery ko heat karke zala sakta he!

[@Friend98980]

Agar isko lekar flight me jaye to koi Dikkat to nahi hogi na

[@MrSM-ui4zj]

It is inner part of the Power Bank my friend. We should cover it with a nice enclosure . Thank you for your valuable comment.

[@susiladhamu5579]

At Erode bustand I have buy like this module for 60ruppes

[@MrSM-ui4zj]

Then you can make it. Just few simple connection. Best of luck. Thanks.

[@ajay2k728]

I use single 3.7v battery but did not charge my phone why

[@MrSM-ui4zj]

The smart phone requires 1 amp to 2 amp charger. So we should use multi cell for making Power bank.

[@urjitbhavsar3048]

Sir here is one of my videokzbin.info/www/bejne/rWisaaeij8xphdE about a complete review of this module. You may find an answer to your question. Thank you.

[@HarrisonRafaqat7811]

Sir show the Blue Light Full Charging This Module ??

[@MrSM-ui4zj]

There is a single red light. That blinks during charge itself. When the powerbank charged fully the light will stop blinking.

[@HarrisonRafaqat7811]

@@MrSM-ui4zj Thanks

[@ItsJimdevera]

Disassembled a working powerbank then assemble it back but this time he video record it and upload it to KZbin and call it DIY i see what you did mister😂😂

[@marvinlacuin7370]

Nope haha i can do that but first i will buy powerbank module

[@ModernMindset_0]

Sir aap bole nahi pate

[@무스비-v9p]

멋지네요

[@harshsaini5165]

Sir if we use 3 batteries will it damage the phone....?

[@MrSM-ui4zj]

Here the all cells are connected in parallel. So the voltage will be the same i.e. 3.7 volt. The powerbank module convert 3.7 volt to 5 volt for charging the phone. Without powerbank module we should not try to charge our phone. Thank you for your valuable comment.

[@urjitbhavsar3048]

Sir here is one of my videokzbin.info/www/bejne/rWisaaeij8xphdE about a complete review of this module. You may find an answer to your question. Thank you.

[@AntiGodiMedia786]

पुरे दीन चार्ज मे लगाकर रखोगे तो बैटरी फूल चार्ज नहीं होंगी