how to make Propeller LED Pendulum Clock, using Arduino NANO, JLCPCB

[@inventorkr1]

What do you think about watching this click here💚💛💜💛❤️🧡💙🖤👇 kzbin.info/www/bejne/qYTOnJ2cdqmUfas

[@adc-tutorial0.1]

Les liens pour cablage et code ne sont pas valides

[@nageshhiremath8022]

@@adc-tutorial0.1 ye konsa language hai

[@alexfrozen]

Absolutely useless BS. De Cadance.

[@SciHeartJourney]

I love this video! 👍

[@santa_clauszzz]

Is all the products are available in flipkart/Amazon

[@SciHeartJourney]

Back in the 90's I saw a big one of these. It was like a stack of pancakes 4 feet tall and 5 foot radius (about 10 feet wide). So the display was a big curved surface on the side. That also kept people away from this big spinning arm with the LEDS. This is a very cool project!👍

[@dustinmcdermont699]

How interesting! An inductive slip ring!!! Such a simple idea, yet so functional! Honestly this is the first time I have ever seen such a thing, Mind blown!!!

[@inventorkr1]

Thanks for your kind words

[@1_and_only_Crjase]

This video is very helpful to my knowledge. Thank you for the sponsor too and the tool you used to make the circuit boards. I've been looking for these and you've just saved me heaps of time.

[@norliasmith]

Small tip, when you solder stranded wires with holders, heat the wire from the underside and add solder to the top side, that will make the solder wick down into the strands more thoroughly.

[@anthonyayala7167]

This whole video has some bad soldering practices. But for his purpose, I'm sure he doesn't care. Lmao

[@user-dm2bq7wk7y]

@@anthonyayala7167 I guess u know what's going on in Ukraine too

[@freevideoservice]

@@user-dm2bq7wk7y What is going on on Ukraine?

[@user-dm2bq7wk7y]

50 billion dollars should say something

[@masCha_97]

alhamdulillah.. ada orng indo yg bisa bikin project sprti itu, jadi gk bingung klo mau nyimak bahasanya😁

[@TheKaniss]

bukan orang indo mas, dr channel nya dia orang Prancis

[@masCha_97]

@@TheKaniss yaudah" yg pnting kata"nya bsa saya cerna 🤭😁 yuk coba 😎

[@LeeBeasley]

This is so cool. Love the use of the induction coils for power. Addressable RGB LEDs would be an amazing update to this project.

[@AIbeginsDotNet]

That use of wireless power transfer was genius, I might copy that ;)

[@JacobP81]

I love how you don't explain every little detail. It's so elegent the way you go through all the assembly. Really cool video. Love it.

[@bluegizmo1983]

That's cool and all, but without an RTC chip, that thing isn't going to keep accurate time, and without any buttons or wifi, you'll have to keep reconnecting it to a computer via USB to re-adjust the time.

[@ThatOneRobloxDev]

Ikr, there is a Arduino that has wifi. I think it's called: Arduino Wi-Fi

[@yajuvendrasinghrajpurohit7888]

@@ThatOneRobloxDev its esp 32 node mcu

[@seferuzan3163]

@@yajuvendrasinghrajpurohit7888 it is normal ordinary ardiuno nano, atmega 328p

[@ВикторМ-у5э]

Привет из Луганска!

[@jlucasound]

That must have been a lot of work to get that all balanced! :-) That is so innovative how you use the coils to provide power rather than a high friction rotary contact. I am liking this more and more!!

[@inventorkr1]

Thanks for your kind words

[@lesdeuxmondes]

I don't know anything about electronics, do you think I can realize your project that you showed us? I liked what your work you are the best.

[@minecuber653]

This is just another level of nerdyness

[@lynasan8657]

Honestly, I'm still amazed by this video

[@mroplok-othok2888]

Keep your spirit from Indonesia

[@lass1234]

This man is like iron chef CHOP CHOP CHOP CHOP CHOP......

[@harunservice8376]

Nice good...amazing.. From indonesia

[@tafsirnahian669]

The wireless setup was genius. But you can also use brush and commutator for high power application

[@arnoldbailey7550]

Awesome 🍻 I call it: fun with epilepsy 😁

[@dominiksalata4234]

You may forgot the fast flashing lights warning! 😖😵

[@thaythinhdaydien]

Your video was very good for beginers

[@cayenne7792]

the fan is brilliant !

[@КоттМайский]

1:57 После того жёлтых светодиод вспыхнул красным цветом он решил уменьшить напряжение и остановил съёмку.

[@dominiksalata4234]

Itis still awesome that you made that! 👍👍😀😀

[@inventorkr1]

Your comment is important to me, thanks

[@BambangSoetedja38]

I like sir. I'm from indonesia👍👍

[@Ale_giro]

Sono convinto che sto tizio mette il "mi piace+cuore ❤" a tutti.. E per dimostrarlo: ma vattelo a prendere in quel posto!! 😚

[@Ale_giro]

Come volevasi dimostrare 😇

[@jugandoclasicos]

Man thats a first step for hologram keep doing this maybe Youll find the next step for tecnology

[@sunilkumar-em1cp]

This video is very helpful to my knowledge🙌👍

[@ldchappell1]

Very cool. Great project for the bored fix it guy.

[@alex_allier9]

Is a really great protect, but this video raised a lot my OCD

[@banyakbacot4758]

OMG, BEST QUALITY PCB!

[@alexmaker6878]

Всё супер. Проект весьма интересный. В теории. Один вопрос - как обстоят дела со звуком? Шум самого движка, шум воздуха, рассекаемого платой с элементами - мозги не протекут после часа работы таких часов над ухом? Не подумайте не правильно - это не стеб. Это реальный вопрос, потому что, повторюсь, проект сам по себе весьма интересный.

[@TMRu22311]

This is a valid question. I imagine it would be pretty noisy. It really is a cool project though. I would look into making an acrylic case for it to contain most of the noise.

[@luciann5691]

Great project !! I really want all details for that, this year i ve to present the license in electronics and comunications. I will try the same project, maybe with another microcontroller

[@inventorkr1]

inventorkr.blogspot.com/2021/06/how-to-make-propeller-led-pendulum-clock.html

[@hpwan5538]

@@inventorkr1 how can i make something like this, and where can i buy a tool like this video.. because the link in the description can't be typed... what is the name of the shop so I can shop

[@benjaminbadrakh1644]

@@hpwan5538 just click the link

[@mikbart251]

9

[@ferraraweb]

Attenzione. Nello schema e sul PCB il sensore di Hall ha i pin 1 e 3 invertiti. Attention. In the schematic and on the PCB, the Hall sensor has pins 1 and 3 reversed.

[@TejPrakash-tu1pr]

Very Very nice ❤❤❤❤❤

[@thomasmaughan4798]

Looks like a Weller temperature regulated soldering iron. Uses a magnetic tip and at a certain temperature the magnetic force disappears and the switch opens and when it cools down just a little the magnetic force returns and closes the switch.

[@Leksandar1]

Svaka cast,veliki pozdrav...

[@aminrekabi8649]

9:35 Dr. Otto Octavius in Spider-man 2 🤣🤣😅😅

[@yeahhaye436]

​ @inventor KR Incredible project and finish. As an arduino newbie I find it very fascinating. I tried to follow the link to study the code and the "gerber" file but I couldn't find it. Could you upload it again? Thanks

[@원정원-m1v]

Wow is can makes clock and very good project

[@ЕвгенийКоролёв-ы5о]

Поддерживаю движение DIY. Хотя идея не нова, некоторые решения сомнительны, а качество пайки немного хромает. Но все-равно это классно, творите и создавайте.

[@mosqit4324]

JEBUS CHRISTOFF HOW THE HECK IS THIS WORKING SO DAMN COOL

[@vinayagamoorthyravindrakum8464]

Super... Show one video about simply looking digital clock hours. minutes and seconds. Using led. What r need how assembled

[@Arifkhan0203]

This is awesome brother

[@olehshewchenko6556]

Круто друже) давай ще цікавих проектів ) Вітання зі Львова))

[@YantoKriwilMiri]

8:21 How long does this rotating axle last because there is no lubricant? And 9:38 why should it take so much grip? less efficient for me

[@SovereignKnight74]

I wish I could buy one of these pre-assembled, ready to go for a fair price.

[@batugunduz3950]

They used to be really popular back in the day. I remember seeing them through every store window. Guessing they fell out of fashion. Look on ebay, you may be able to find a cheap enough one. If my experience applies to the US too that is

[@oksowhat]

This is the coolest project ever seen

[@jaimeluis1901]

Muito bom!... incrível e funcional.

[@عمادنجم-ش3ر]

The best KZbin channel ever!

[@Globaltalentgt]

Wow what a great idea 💡💜💜💜

[@laconeccionvideo]

Buen diseño, hace 10 años que he querido uno. Finalmente lo podre hacer en casa con CNC y Grabado láser; solo dure un poco en hacer las maquinas.

[@laconeccionvideo]

los diseños incluyen el sujetador de pcbs y algunos aditamentos también hechos con una impresora 3D hecha en casa.

[@adamprout186]

Hi, what psi’s are you using to power the motor and the nano please

[@ConsultingjoeOnline]

Why not us ws2812b leds?

[@fartmaster2933]

I like your voice very clear and calm

[@xxxxxxxx9173]

Very good 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

[@paulstubbs7678]

A bit quick on the soldering, try letting it flow around the legs, some joints looked just shy of dry

[@franziskas.7594]

Amazing video!! Thank you so much for all the Tipps. Super inspiring 🙌🏻

[@inventorkr1]

🖐✅🌹

[@franziskas.7594]

@@inventorkr1 Is there a Bill of Material / Stückliste? I would like to try to recreate it. :)

[@ВиталийКовригин-е3ь]

Все круто, но зачем так усложнять? Можно просто взять кусочек адресной светодиодной ленты с высокой плотностью пикселя и ардуино, и сделать тот же проект...

[@Rin_Media]

Классно, может покажешь как?

[@VG-kw8pt]

сюда очень подходит мем "как нарисовать лошадь". Самая сложная часть - сделать сам пропеллер. Нужно рассчитать, где должен быть центр масс, что за мотор используется (у меня мотор от вентилятора не подошел!), а информации по этой части в видео и по ссылкам "на отъебись"

[@cptnredbeard7303]

А какая разница какой мотор? Главное чтоб сумел разогнать скорость необходимую для полученния еффекта. А частоту вращения ардуинка считает датчиком холла. А вот вес подбирать реально какое то извращение. Уж проще сделать этот пропеллер симетричным относительно оси вращения.

[@VG-kw8pt]

@@cptnredbeard7303 в любом случае это самое сложное, а в видео об этом ни слова

[@veomadonnathebestdog.7936]

Сказиье посалуйта, энто пошти готовиый консрктптор?

[@cathelenaa]

Can you make a ESP 32 and 0.96 OLED crypto price ticker (Which shows more than one crypto)? Asked this question to many youtubers but none made it

[@giuseppevillella9445]

Super creator 😊👏

[@jerrodrollins1509]

Dude, this is soooo cool!!

[@MatthewSuffidy]

So it looks like the thing in the middle is an induction 5v supply, but I don't see any data lines. The sensor on the side of the board seems to be sensing a pass and thus is a timing element for the display. So you would have to somehow set the arduino's time and it is taking care of updating it? Any reason why not to just solder the 5v wires into the through hole? instead of on top of it.

[@Diamond-Daga]

Thank you for such an amazing video, is it possible to have a propeller clock which shows day, date, time, temperature and chimes for hour

[@21wanted75]

Super projet, très intéressant, j'aurais aimé voir le programme Arduino dans la nano svp et un schéma électrique complet

[@pierrek1532]

C’est un beau projet mais qui ne peut pas indiquer l’heure… il n’y a ni wifi ni rtc à l’intérieur …

[@timmorris171]

Would this be possible to do with a compass on the back of a Jeep spare tire cover

[@GetRealwithMike]

How about making one that can disply images, like a bottle of hot sauce for a store? The bottle spins, flips and what ever to get people to buy it. Maybe using a programmable RGB light strip and arduino. PM me if you make it. Thanks

[@waynefitkin1104]

KR, Can you sell a complete kit with all the parts?

[@inventorkr1]

Just the Gerber file and you can install it yourself through this link ko-fi.com/s/f9ec6353f2

[@U2VR_Channel]

Clock without RTC?..

[@yuspianpertamana1347]

SAE pisan kang tutorialna

[@chadellett4696]

its more a recipes then an invention.

[@anushkamore7831]

Can't we purchase the object directly??? Is it only DIY?

[@inventorkr1]

DIY

[@TECHHAMARA]

Garber file not found in the Blog link only pcb and diagram is it.

[@irwankfiransyah201]

Nice video..😎😎🤗🤗🤗🤗

[@aprendiendomaker2288]

Hello Inventor KR. Your work is admirable. It makes me a healthy envy to see everything you are capable of doing. I am writing to you from Spain I see that there are things on the channel that you write in Spanish. In relation to the pendulum clock project made with leds and arduino. where could I buy the printed circuit board you designed? Like the coils to feed the arduino. Thank you very much. Congratulations on your great work. It is a real pleasure to see the work of people like you. A greeting from Spain

[@inventorkr1]

Hello my friend, it is a great honor to be one of those interested in the projects that I present. All information and details can be found through the link below the video in the description box.

[@aprendiendomaker2288]

@@inventorkr1 Thank you very much for answering. All the best

[@harshans7712]

That was really informative and interesting, thanks a lot for this video, I gained some knowledge seeing your video

[@ivand8393]

and how did you balance it?

[@inventorkr1]

By putting weights on one side until you balance

[@user-hv1lk9zd3j]

Why do you solder red and black wire?

[@lancemcque1459]

Where can I get the PCB?

[@buddybuythis3889]

I want some too.

[@theonewhowas7709]

This dude really turned an old boom box into a PSU.. lol.. nice

[@steelbrotherhoodof2359]

hi there peeps. one question for ya. if you put a red led under a bleu led. instead of next to it. will the colors blend ? and with what rotation speed and mounting distance in correlation toowards that speed ? (singing for you a jollu good fellow...)

[@aavezgaming4399]

someone help me what is the name of the card which is using in 00:36 min. Please tell I love this project

[@Hong-zt7tz]

Very cooool design!!!! I am a college student from Taiwan and doing a project related to this. But I don't find the same EasyEDA fils which can import to ,so if you don't mind ,could you share the json document of this project? Appreciate to your help very much!!

[@themen012]

You're supposed to solder before you cut, no?

[@VikasKumar-le6kj]

have you available 5.1 home theatre PCB with use of 5200 transistor

[@robertlaube574]

When i was a kid maybe 10. i thought about something like this on car tires, but an image not the time. Now ots possible , cool.

[@javaidyousuf4113]

Sir mera sawal hai k aghar hum motor ki speed halki ya tez rakhange tau clock kam nhi kare ?

[@jameshauser1507]

nICE PROJECT AND THANK YOU FOR SHARING---BUT BAD SOLDERING TECHNIQUE.

[@RixtronixLAB]

Keep it up, nice video, thank you for sharing it :)

[@MrPao987]

Am I the only one that realized he put the LEDs wrong the first time? Sorry I'm too much of an attention to detail guy, cool video!

[@ianditch]

How do you prevent the electrons from flying out the end?

[@TrapperAaron]

Clock only tics does not toc. Aka only counts seconds at apex of left movement. " normal pendulum clocks" count a second at the end of each stroke.

[@eier5472]

Two tips for when you're assembling it yourself: 1.) Use screws instead of hot glue. Much sturdier. 2.) *FOR THE LOVE OF ALL THAT IS HOLY* don't solder like this guy. You heat both the pin and the pad and apply solder to it. Do not make a glob of solder on your iron and then try to stick it onto your pin - all you do is ruin the soldering iron

[@johnrichards3235]

Love this. So awesome

[@blackjackzygarde1404]

Is it possible to animate an object but using led strips/beads and more complex code?

[@maniac1075]

What is the name of these things in a kids toy form? I bought one last year from K-Mart that was on a wand thing, the blades where just plastic, but it was an Avengers theme of various lights that changed into words and pictures. I bought one for my son, but he accidentally broke it, and now K-Mart don't have them anymore, and I can't find any on eBay or anything. I've tried "Led Disney/Marvel" with "wand", "fans", "propeller" and a bunch of other things, but nothing like it comes up in the results.

[@Francesco105590]

Ciao, non riesco a vedere lo schema e il codice

[@HSBbahner1]

Hello, my question: How does the Time Set?

[@johnjriggsarchery2457]

With a giant bang

[@johncoops6897]

Set in computer when programmed. There is no crystal oscillator used so the time will be completely wrong in an hour or so.