How to make stickers using the Silhouette Cameo and Silhouette Studio 4.1 software. Sticker Paper: www.amazon.com/Rock-Paper-Sci...
Пікірлер: 707
@panhandlepilot93636 жыл бұрын
Finally a video that speaks in plain English, simple terms, shows buttons etc, and does from beginning to end. Thanks for taking the time to make this.
@Gunmetalpuppy136 жыл бұрын
Fl Yak Fisher Lol! Thank you for watching 😉
@zivethan72 ай бұрын
😂❤
@everl0stt6 жыл бұрын
You are the best! I kept trying to do this on my own, and I didn't realize how much ACCURACY turning on the registration marks are! Thank you!!
@Gunmetalpuppy136 жыл бұрын
everl0stt yay!! You're welcome! 😀😀😀
@Mrsphomm6 жыл бұрын
Thank you for showing the whole process printing loading and cutting. This was very helpful. One of the few videos using the new update.
@Gunmetalpuppy136 жыл бұрын
Mrsphomm you're welcome! Thank you for watching!! 😁😁😁
@SDChargerfreak4 жыл бұрын
This video taught me so much about the software. I like how she shows every step from start to finish. Great video.
@doloresroy4765 жыл бұрын
Finally, someone that explains it all really step by step! Thank God for people like you! Now I can start learning how my Silhouette basics works!
@kimou8124 жыл бұрын
Thank you so so much, I bought my silhouette off Ebay - no instructions and have watched heaps of videos that only increased my confusion. Your instructions were very clear and helpful for someone like me who is really into journal stickers. Thanks again
@Gunmetalpuppy134 жыл бұрын
I'm glad I could help! Thanks for watching! ❤❤❤
@natscat78035 жыл бұрын
I've watched so many videos on how to make stickers and this is by FAR the best one. So simple and straight to the point. Thank you so much!!
@RNIvy6 жыл бұрын
I bought get my Cameo December of 2017 as a Christmas gift. Now we’re in July and after watching super long videos that did not help, this is THE ONLY video that has helped me design and cut my stickers properly in the first try!!! I can’t thank you enough!!! Almost crying of happiness!!!!!!!
@Gunmetalpuppy136 жыл бұрын
RNIvy YAYYYY!!!! I'm glad you figured it out!!!
@ThatsSoBeba5 жыл бұрын
I’m going through the same! I hope this works when j try if
@bLuNTsMoKe2513 жыл бұрын
I’m new to this sorry but did you use adhesive vinyl for your stickers? or which vinyl do you buy. Thanks agan
@tiffanyroseboro70855 жыл бұрын
Definitely the best video out there for sticker making and thank you for the step by step tutorial. I bought my silhouette specifically for sticker making and after a year of staring at the machine I feel confident enough to have a go at it. thanks again.
@Gunmetalpuppy135 жыл бұрын
Yay!! I'm so glad I could help! Thank you for watching !
@jacquelinedk54285 жыл бұрын
So easy to understand. So many tutorials jump from A - C, leave out B and presume we novices make the jump with them. Also loved that it wasn't just screen-capture instruction, the whole process was shown. Brilliant step by step guide and learned other things I didn't know about the machine as well ! Thanks.
@Gunmetalpuppy135 жыл бұрын
I'm so glad this helped you! Than you for watching!!
@summerbornrose6 жыл бұрын
This is probably the best instructional video I've seen. Thank you for taking the time to show the entire process from creating the sticker in Silhouette Studio, setting cut lines, printing, and cutting.
@Gunmetalpuppy136 жыл бұрын
Rose awe thanks! And thank you for watching!😘😘😘
@meeshelly254 жыл бұрын
Years later and this video is so helpful!!!!! Thank you for going step-by-step!!
@Gunmetalpuppy134 жыл бұрын
Yay! Im glad this helped you! ❤❤❤
@royolivarez805 жыл бұрын
Very helpful video. I've owned my Cameo for about 3 years. You showed me features didn't even know the program had. Can't thank you enough. Have always been into making vinyl decals. This will be my first attempt to make printed stickers. You showed the process from start to finish. Awesome!!!
@Gunmetalpuppy135 жыл бұрын
Yay!! I'm glad I could help! Thank you for watching!
@leighcarte46886 жыл бұрын
This video is THE BEST one I have seen...and I have seen more than I care to say (trying to learn how to make stickers the right way). You not only did an excellent job showing the steps but the WHY behind them. For the first time in 4 months, I truly understand the trace features, and the detach, and grouping. THANK YOU, THANK YOU, THANK YOU!!!
@Gunmetalpuppy136 жыл бұрын
Leigh Carte you're welcome!! Glad this helped you! 😁😁😁
@chuchipuchi6204 Жыл бұрын
I keep coming back on this vid everytime i forgot how to print n cut. The best detailed vid. Salamat po😍🇵🇭
@Gunmetalpuppy13 Жыл бұрын
Yay!!
@amandabarrera87656 жыл бұрын
Amazing tutorial… too many girls dont want to show us how to really make stickers and manuver all the buttons to making good planner stickers but you did and were forever grateful!
@Gunmetalpuppy136 жыл бұрын
Amanda Barrera Lol! I don't know why, it's not really a secret! Haha... but thank you for watching and I'm glad this helped!
@amandabarrera87656 жыл бұрын
Some people even went the extra mile to hide their printers and paper in alot of videos…. they compared revealing that to “ its like giving away their grandmas secret ingredients in a soup”….. REALLLLY??? lol im a stay at home mama that has 4 children…. All i wanted to learn was how to make my own stickers for my planner because i cant afford ETSY every holiday when i need stickers lol. Truly am so happy you made this video.
@Gunmetalpuppy136 жыл бұрын
Wow that's crazy! Lol well I'm glad this helped you! 😁😁😁
@michelleraine47806 жыл бұрын
This is by far the best tutorial I have seen that shows how to successfully accomplish a print and cut with kiss cut on sticker paper. I am a new silhouette owner and nearly ruined my mat with my first three tries. I was able to do my first successful print and cut with kiss cut because of this video. Your best advice was to play around with the blade setting and force. For anyone out there having the same problem as me (I used the default settings in Silhouette Studio for white sticker paper and with these settings my blade cut clean through not only both layers of sticker paper, but my mat too.) I actually had to set my blade to 1 and my force to 1...my blade is brand new so that might have something to do with it. Thanks so much for the awesome tutorial.
@ettajames34946 жыл бұрын
Well this was the most detailed tutorial on making stickers so far. Will give it a try once my sticker order comes through. Well done!!!!
@Gunmetalpuppy136 жыл бұрын
Lisa Griffith thank you! Have fun making stickers!!
@patriciaholland51826 жыл бұрын
This is the best tutorial on how to make stickers. I've learned so much. Thank you!
@Gunmetalpuppy136 жыл бұрын
Patricia Holland awesome!! Thank you for watching!!
@MegensBay5 жыл бұрын
Thank you for taking the time to explain what you are clicking on. One of the best videos I’ve seen so far.
@Gunmetalpuppy135 жыл бұрын
Thank you for watching! ❤❤❤
@penguinlvrpenguin6856 жыл бұрын
Thanks so much! I was finally able to create some stickers as a gift! Print and Cut Tips for people having trouble: overdraw registration marks with sharpie, use flashlights for more light, keep the lid of the machine up, and print on normal or excellent quality
@Gunmetalpuppy136 жыл бұрын
Penguinlvr Penguin awesome!! Thank you for watching!
@serenler97065 жыл бұрын
The best video i have watched ever that explains precisely what you have to do. love it
@Gunmetalpuppy135 жыл бұрын
Thank you! I'm glad I could help 😁😁😁
@diamondgirl474 жыл бұрын
You are Awesome!!! This is the best tutorial I've watched EVER. You're soft spoken and take your time explaining. Most tutorials I've watched, they talk to fast. Thank you so much.
@Gunmetalpuppy134 жыл бұрын
Yay! Im so glad I could help! Thank you for watching 😁
@dawnshearer91224 жыл бұрын
Thanks for talking in “I am not technical at all” directions. This was simply done and I am off to make stickers. Registration marks moving them went fast but going to try. Thank you. Xox
@dinabarboza49726 жыл бұрын
I watched your video and did my first sticker page alongside you. I’m so proud of myself! Thank you for your tutorial! Super easy and fun!
@Gunmetalpuppy136 жыл бұрын
Dina Barboza that's awesome!!! 😀😀😀
@PlannerBrit3 жыл бұрын
This is the most helpful video I’ve ever seen on KZbin!! Thank you!! 🎉
@Gunmetalpuppy133 жыл бұрын
Yay! I'm glad I could help 🙂
@TanGia0014 жыл бұрын
Many thanks. I've a Portrait and still after 2 tears didn't know a few things you've shoved. Learned something new 😊
@sallynwider97014 жыл бұрын
This is literally the only tutorial that has helped me! Thank you so much
@Gunmetalpuppy134 жыл бұрын
Yay!! You're welcome 😁
@pocketalma1885 жыл бұрын
You seriously blew my mind! idk how many silhouette videos I have watched and none of them showed me as much as you have, and I've only watched a couple mins so far XD Thank you
@karrysmith93365 жыл бұрын
This video by far has been the most instructional video i have seen. Thank you for actually showing things up close ans giving a detailed explanation.
@Gunmetalpuppy135 жыл бұрын
I'm glad I could help! Thank you for watching! 😁
@BoojiePanda6 жыл бұрын
Amazing instructions!! This is exactly what I was looking for. The only thing I'd recommend is adding links in the video description for items used in the video (ie; sticker paper).
@Gunmetalpuppy136 жыл бұрын
Sherry Bora good idea! I will work on that the next time I fire up my laptop! Thanks for Watching! 😁
@Iismrgreen6 жыл бұрын
for real
@leticiaramos48825 жыл бұрын
Sherry Bora o
@au-someteacher90186 жыл бұрын
Thank you so much for this tutorial. The light advice was really helpful. I have not gotten my new machine to read my registration marks since September, it is now December. Thank you, this was so helpful and the directions were very clear.
@Gunmetalpuppy136 жыл бұрын
Au-some Teacher I hope you get it to read your registration marks! Thank you for watching!
@judyblaise16396 жыл бұрын
Very good information. I won't be as frightened to do print and cut of stickers. Thank you very much
@atpeaceapparel78985 жыл бұрын
Thank you!!! I've had mine for months and this is the first video that real worked for me!! I am so excited!!
@Gunmetalpuppy135 жыл бұрын
Yay!!! I'm glad this worked for you!
@pmgodfrey5 жыл бұрын
No way! I bought a used cutter, same model, like three weeks ago for $70. I didn't know it could do this. How cool is that!
@Gunmetalpuppy135 жыл бұрын
pmgodfrey Score!!!! Oh the things you can make with this machine!!!
@ashleyrobinsonillustates2 жыл бұрын
This is the best step by step I’ve seen yet!!!!! Thank you!!!!!!!
@michaelborkowski93946 жыл бұрын
I want to thank you for putting this video up, I have gone through it several times to learn sticker making and your video helped me greatly Thank You again.
@Gunmetalpuppy136 жыл бұрын
michael Borkowski you're welcome! I'm glad I could help... thanks for watching!!
@BethanyChanPlans3 жыл бұрын
Possibly the most helpful video on the internet. Thank you for posting this!!
@megane230f15 жыл бұрын
Thankyou for that video, Found it amazing to watch, I have recently purchased a cameo 3, The making vinyl signs printing apparel aint a problem, Making stickers with it is a new learning curve for me, And the time you have taking to make that video and upload it to youtube is highly appreciated, Thankyou again 👍👌🏻🙏
@geminidream43473 жыл бұрын
Thank you for showing how to do this step by step. I am a beginner and I too got gifted the same machine as you when my sister in law upgraded. It's nice to see video's done on the same machine as you use. I dubbed, liked and alarmed because of th is.
@user-vq8lv3lg9b4 жыл бұрын
Thank you for this video! I’ve been sad for days thinking this machine will work well on my first try but the cutting were always off of place because I don’t really understand the steps and i keep trying but it didn’t come up as what I expected😭😭 now i know where is my mistake! Thank you so so so much!!!😭😭😭😭❤️
@auntmoosevlogs8985 жыл бұрын
I’ll have to watch again because the cutting, getting the “bubble” around it is my hardest part. You are very clear though so that helps.
@rindallbroxmitten3 жыл бұрын
Thank you, thank you, thank you. This worked like a charm and I've made some lovely stickers by scanning some wrapping paper which had all kinds of birds on it and turning the images into stickers.
@Gunmetalpuppy133 жыл бұрын
Yay! I'm glad I could help! 😁😁😁
@Anna-de4mu5 жыл бұрын
Oh my goodness😊 thank you so much for this video. I’ve been watching videos but nothing like yours. Thank you for explain it so well. 😊🌸
@Gunmetalpuppy135 жыл бұрын
You're welcome! Thank you for watching!
@NoNegotiations5 жыл бұрын
Best video that I could find about setting it up and cutting it out. Thanks
@bryantisbest90323 жыл бұрын
OMG, girl! Please do more of these videos! You do such a good job mentioning each detail and you don't talk too fast ;)
@serenstardesign97255 жыл бұрын
Thank you for sharing. I'm a newbie to Silhouette, I have a Cameo 3, your video was the easiest to follow that I've seen and I've watched a few! I can't wait to get started now!! I hope I'm not aiming too high, I'm planning on making personalised stickers to go with my daughters party favours...
@Alexxave322 жыл бұрын
it's 2022 and today I printed & got cut a sticker set for my girlfriend meaning this tutorial not only works, but it is relevant even after 5 years! thanks so much for the help!!!!
@cyrillebeau5 жыл бұрын
i dont usually add comments to videos, but this was a really helpful tutorial, exactly what i was looking for. thanks for uploading!
@Gunmetalpuppy135 жыл бұрын
Awesome! Thank you for watching!
@LyreandLiar5 жыл бұрын
Thank you for the video, i've been trying to figure out how to make my stickers to give out for a convention in a few weeks that go with my cosplay. So excited to get back to work!!
@Gunmetalpuppy135 жыл бұрын
Yay!! I'm glad I could help!!
@laurasanchez12734 жыл бұрын
I thought I knew how to do print and cut but you gave so many amazing tips I did not know thanks!!!
@paperballcreative4 жыл бұрын
I wanted to rip my hair out because I was having a ton of alignment issues, and no articles or videos were explaining any solutions well enough to fix my issue, but you saved my night. Thank you for sharing!!! I'd like to send you some stuff as a thank you, so please, reach out!
@pamgde2 жыл бұрын
Awesome tutorial, I’ve seem several and yours by far was the best. Not a lot of boring chitchat to get me confused and uninterested. Thanks
@Gunmetalpuppy132 жыл бұрын
I'm glad I could help 😊 thank you for watching!
@caifandres66945 жыл бұрын
I wish every tutorial on yt was made with this voice. 😃
@ylindley4 жыл бұрын
Thank you for your very helpful step by step tutorial! I’ve been waiting to try making stickers
@Gunmetalpuppy134 жыл бұрын
Yay!! You will have so much fun! 🤩🤩🤩
@lorabrady-welcometoourkitc99316 жыл бұрын
I just bought a new Cameo 3 with the 4.1 Studio software and this is so helpful. You should see me pull my hair out trying all the tools and tabs. You would think this should be a cinch to me since I am practically familiar with just about all the Adobe Graphics program. Thank you so much for the very precise and methodical way you explain the process, such a calm and pleasant voice! You should make more videos in the new Silhouette Studio. Thank you!
@Gunmetalpuppy136 жыл бұрын
Lora Brady oh believe me I was pulling out my hair too in the beginning!! 😂😂😂 I'm glad I could help you! Thank you for watching!
@kiddio719505 жыл бұрын
Best and accurate video I have seen in a long time. Paid 35.00 for a class didn't help. Thank you soooo very much.
@Gunmetalpuppy135 жыл бұрын
😱😱😱 I'm so glad I could help! Thanks for watching!
@kiddio719505 жыл бұрын
Yes make more please. You're my you tube teacher.Thank you
@PolyDellamore6 жыл бұрын
Thank you so much! I buy a Cameo last week and I was so frustrated when I couldn't do the stickers. Now I feel ready to try again and beat the machine this time haha
@Gunmetalpuppy136 жыл бұрын
Paola Riquelme yay!!! I hope this helps you! Thank you for watching!
@conyermud13 жыл бұрын
Yup, great video. Thanks for that demonstration.
@fabiafabia58066 жыл бұрын
First time. I did exactly what you said. Cameo 3. Instead Rachet blade auto blade, same numbers. Perfect! Thanks.!. Greetings from Argentina
@Gunmetalpuppy136 жыл бұрын
Yayyy!!!
@ablelili4 жыл бұрын
OMG!!! You saved me! this is exactly what I need to cut my labels. thank you!
@Gunmetalpuppy134 жыл бұрын
Awesome!! 🙌🙌🙌
@tsvas3136 жыл бұрын
Thanks for taking you time to do this! This video was super helpful!
@Cupcake69076 жыл бұрын
Excellent video! I’ve watched many and I learned the most from yours! Thank you!!
@Gunmetalpuppy136 жыл бұрын
Chawnda Branscome I'm glad I could help! Thank you for watching!
@suescholz46453 жыл бұрын
Excellent video. Easy to follow. I’ll be using this as my instructions to make stickers. Thank you so much. All the way from Australia.
@Gunmetalpuppy133 жыл бұрын
You're welcome! Glad I could help 😁
@Tars_Family3 жыл бұрын
Thank you so much for your help. We come back to this video every time we need help.
@Gunmetalpuppy133 жыл бұрын
I'm so glad I could help 🥰 thank you for watching!
@medinala5 жыл бұрын
I appreciate your help! This tutorial had everything I needed.
@Gunmetalpuppy135 жыл бұрын
Yay! I'm glad I could help you 🤗🤗🤗
@MsBondgirl0694 жыл бұрын
Thank you so much for this video!!!! I have learned more from your video than I have watching a ton of other videos! Excellent!!!
@patriciaevans28674 жыл бұрын
Oh my! You’re brilliant!, I’ve been making stickers and using registration marks for a long time! I’ve had a problem with my lighting as well. I have been holding a desk light ver the registration marks till it’s done reading them bc it has such a hard time! I never thought of using a book light!! Duh.😝 Thank you! I feel kinda silly now Lol! Great idea...
@sweetmandyc6 жыл бұрын
Thank you so much for this video! Very informative and not confusing at all.
@Gunmetalpuppy136 жыл бұрын
matteblacklife Thank you for watching! 😁
@cherylherrin2264 жыл бұрын
This was sooooo helpful!!! Thank you so much for taking the time to make this video!
@Gunmetalpuppy134 жыл бұрын
You're welcome!
@sonjafe3 жыл бұрын
So cool! Great job on the tutorial. Easy to understand and follow.
@BeingBrandy6 жыл бұрын
Very cool! Thank you. Can’t wait to try this 🤗
@hannahstalls43255 жыл бұрын
This is a great tutorial. Thank you so much!
@sedonaag6 жыл бұрын
thanks, I was looking for a tutorial in order to make cake toppers using characters so this helped. I am thinking of buying a Silhouette Cameo 3. I was really interested in seeing how they are printed and then how the silhouette cut them. Thanks so much for sharing!
@WhatsNext9385 жыл бұрын
Thank you! It helped with more than just the sticker. Great job.
@Gunmetalpuppy135 жыл бұрын
Yay! Glad I could help!
@Randillaa6 жыл бұрын
Thank you so much! This was super simple to follow and I got perfect results the first time :)
@Gunmetalpuppy136 жыл бұрын
Randilla yayyy!!! I'm glad this helped! Thank you for watching!
@lillianmays10415 жыл бұрын
That was a perfect tutorial. Thank you so much!
@joan_of_arc14315 жыл бұрын
OMG, your video is awesome....I watched this a few times now but it didn't click until tonight. You are explaining it so simple and make it so easy.
@Gunmetalpuppy135 жыл бұрын
Yayy!! Glad this helped you!! 😁
@DJSam2025 жыл бұрын
It was really helpful, Thank you for all the time you spent making this tutorial .
@penniesmakecents57095 жыл бұрын
This is awesome!!! I have the same silhouette you have and I just tried it and it worked!!
@Gunmetalpuppy135 жыл бұрын
Yayy!!!
@LADYCRAINBOWLADY3 жыл бұрын
Great vlog thanks so much going to try this tomorrow with my new Portrait 3 xx
@craftiness36846 жыл бұрын
Awesome job. You should do a series on using the silhouette. Easy to understand and straight to the point. Thank you!!!
@Gunmetalpuppy136 жыл бұрын
Craftiness awe that's so Sweet of you to say!!... but unfortunately I'm not a pro lol..BUT I am taking a silhouette class next week at Planner Con so I will see what cool tricks they will teach and maybe I might do a video... maybe.. 😁thanks for watching!
@Vectorizeimages2 жыл бұрын
Good job. Beautiful stickers.
@thealt_latinapremed4 жыл бұрын
Watching this in 2020 with a Silhouette portrait 2 and it was super helpful. Thank you!
@Gunmetalpuppy134 жыл бұрын
The Ceej yay! Glad it helped 😁
@sharianddeanmontague7842 жыл бұрын
Thank you for the great walk thru! Please do more tutorials on other Silhouette Cameo features! I received mine as a gift a few years ago and barely use it because I struggle to understand how to work it. I made stickers step by step with your video today and was so excited that it worked!
@Gunmetalpuppy132 жыл бұрын
Yay! I'm so glad I could help you! I have another video on how to make vinyl decals, if that's somethings you're interested in 😊
@sharianddeanmontague7842 жыл бұрын
@@Gunmetalpuppy13 I would like to try and make a shirt iron on with the Silhouette. Have you ever done that before?
@Gunmetalpuppy132 жыл бұрын
@@sharianddeanmontague784 yes! It's super easy... it's almost exactly like making a decal ( my other silhouette video) except before you cut it, you mirror the image because you put it face down when ironing...and for the ironing process, it will depend on with HTV you are using.. they all come with their own instructions 🙂
@geminiburglar5 жыл бұрын
This was a very good tutorial! Thank you so much for getting straight to the point! New subbie!!
@Gunmetalpuppy135 жыл бұрын
Thank you for watching!
@JD-vh4ct4 жыл бұрын
Absolutely the best video! Thank you!!!
@folasko51204 жыл бұрын
Very clear instructions. Super helpful! Thank you ♥ ♥ ♥!
@brooklynsmom411016 жыл бұрын
Using a book light is an absolute genius idea!!
@Gunmetalpuppy136 жыл бұрын
Jennifer Nichols 😁😁😁
@gonzalez-valdez80435 жыл бұрын
thank you for this tutorial and for taking the time to explain and show every step by not talking super fast and doing everything like if you were in a hurry to go somewhere :-)
@_sosonikki6 жыл бұрын
Thank you so much for this video! I ran into a bit of trouble but I figured out with the help of this video!
@Gunmetalpuppy136 жыл бұрын
Nikki Gholston yay!!! I'm glad I could help you!! 😀😀😀
@meanpicker5 жыл бұрын
This is a game changer! Thank you for sharing!!
@Gunmetalpuppy135 жыл бұрын
Thank you for watching!
@patriciawiley996 жыл бұрын
Nice and straight-forward. Thanks!
@Gunmetalpuppy136 жыл бұрын
Patricia Wiley thank you for watching!
@jananstunes Жыл бұрын
Ok I'm subscribing. There are so many videos on this but yours was the easiest to understand
@leslieyowell72395 жыл бұрын
Thanks for the tip about the light. I did not know that.
@kaylastruble53845 жыл бұрын
thank you for making that video, it was very helpful on understanding what I need to do and how to. thank you once again.
@Gunmetalpuppy135 жыл бұрын
Thank you for watching!!
@mcrcrazy3454 жыл бұрын
Your video is sooooo extremely helpful! Thank you very much
@Momcat66 жыл бұрын
Thank you, thank you! I'm brand new to the Silhouette I had to watch about 5 times before I actually 'got it" but I have stickers!
@Gunmetalpuppy136 жыл бұрын
Momcat6 yayyy!!!! 😁😁😁
@frankiclark70466 жыл бұрын
oh thank you so much for your fab video, I was looking for something completely different when i came across it lol.... so pleased I stopped by and watched :-)
@Gunmetalpuppy136 жыл бұрын
franki clark thank you for watching! 😁
@ThePianoSchool6 жыл бұрын
Thank you so much! I just opened my first Cameo and needed help!