Make Vinyl Glass Can Wraps with Roland BN2 in Minutes! 😍 This is a great alternative to UV DTF wraps ⭐ SHOP #1 Roland BN2-20A Bundles shrsl.com/47e1c 🥰 All BN2-20A Bundles: shrsl.com/47e1c ❤ All BN2-20 Bundles: shrsl.com/47e18 💯 Recommended BN-20A Bundle with Ink and Media: shrsl.com/47fsk 🖨 Recommended Stand for BN2-20A and BN2-20: amzn.to/3Zei6lj Roland BN2-20 Ink Set CMYKW: shrsl.com/47e4w
@marylena582411 ай бұрын
Is there a process you can show how lamination with the machine will work
@jameshall381411 ай бұрын
Thanks for the videos. How much waste is at the beginning of each print or can you make it roll back to start printing on the edge?
@VinayKumar-oq2jx9 ай бұрын
Can we make prints on the tshirts as well just like you showed on Bn 20? If yes what is the difference and how easy its and how different making tshirts in BN 2 series vs BN 20
@Kevin-u5v9m6 ай бұрын
i struggle finding the right transfer tape for this application, what kind did you use?
@VinayKumar-oq2jx9 ай бұрын
What about the heat press smell on tshirt.. like sublimation has a smell which is at times not good for health on the gas..
@DeannaOsborn-d3y11 ай бұрын
Can you do a video on how to do the 12x12 sheets please
@ashleyrichardi626511 ай бұрын
Hello. Thank you for your videos! You are totally the reason I got the BN2. Would you be able to tell me what speed you are cutting at? So far my default 15 seems to be lifting up edges. Thank you!!!
@SilhouetteSchool11 ай бұрын
If the edges are lifting when you're cutting with black around the edges, try cutting first then printing.
@ynellirosas3 ай бұрын
hats the max print on the width?
@meganromero73376 ай бұрын
Can you tell me what pressure I need to set this at when I did a wrap and went to weed it, it came up as a hole I had to keep pushing each design down so it wasn’t getting pulled up with the weeding. Thanks
@SilhouetteSchool6 ай бұрын
You could try reverse weeding in that case then
@peggykrier-u4b7 күн бұрын
Does it pay to buy UV DTF sheets to put on glass cans? and how do they hold up after being washed?
@SilhouetteSchool5 күн бұрын
If they are printed and cured correctly they hold up great in the dishwasher
@craftycathy844411 ай бұрын
Quick question- can you use this version of flexi versa-works software with the Roland BN-20?
@SilhouetteSchool11 ай бұрын
No, it only works with BN2 and it's only available with the BN2 right now. I'm hoping they will release it as a standalone option for purchase, but I'm not sure that's going to happen.
@mzlibra101710 ай бұрын
Do you have a video for the uv dtf for the roland bn20a
@SilhouetteSchool10 ай бұрын
UV DTF uses a totally different type of printer and ink than the Roland BN-20A which is ecosolvent.
@VinayKumar-oq2jx9 ай бұрын
Also , say if I dont use it for a week or a month any ink clogging etc.
@j.rabbitcrafts8 ай бұрын
You have to keep the machine on sleep mode when it is not being used. Do not unplug it or power it off. When in sleep mode, the machine will clean itself automatically.
@mghtrock4811 ай бұрын
should you laminate the stickers?
@SilhouetteSchool11 ай бұрын
You can, but I am testing now how it performs without laminating. So far so good..even in the dishwasher
@mghtrock4811 ай бұрын
@@SilhouetteSchoolif you did laminate, you could not rerun the sheet through the printer right because the material will be too thick for the cutter?
@mvpro2k811 ай бұрын
@@mghtrock48 You can return it with registrations mark printed. It can cut up to 16 mils. Laminate adds 2-3 mils only.
@mvpro2k811 ай бұрын
Is it wasting initial 4 inches of vinyl just like bn-20a?
@SilhouetteSchool11 ай бұрын
It does need a lead but you now have an option to set the basepoint so you an reduce how much waste
@thehy-chefamily843011 ай бұрын
Maybe I don’t finish the video, but what vinyl is it supposed to use?
@SilhouetteSchool11 ай бұрын
You'll want to use an ecosolvent printable adhesive vinyl. I used GCVP. shrsl.com/499rt
@myriamperso5965 ай бұрын
Is it waterproof please ?
@SilhouetteSchool5 ай бұрын
Yes
@wawacollections9 ай бұрын
Is this uv dtf?
@SilhouetteSchool9 ай бұрын
This is from an ecosolvent printer the Roland BN2-20a!
@ynellirosas3 ай бұрын
Oh my goodness that’s a lot of wasted vinyl 😮😮😮
@DeannaOsborn-d3y11 ай бұрын
Can you do a video on how to do the 12x12 sheets please
@SilhouetteSchool11 ай бұрын
What do you mean? How to print 12x12" patterned vinyl?
@sherrylindberg5 ай бұрын
Do you have a video how to change the square box in flexi design. And also how to do I just do a cut svg file. How can I sign up for one on one help. Just got my BN2-20A.