How to make Wheel Cribs

Here is the link to watch how to use them.
• How to use the wheel c...
A how to video on making Wheel Cribs to raise your car off the ground and keep it in the air without using a jack stand.
I take no responsibility if you make these and you don't put them together correctly and they break. Please use common sense and build safely.
I used a miter saw to make all my cuts, you could use a circular saw if that's all you have.
I made them 10 inches wide and 15 inches long. total of 32 10 in boards as well as 32 15 in boards.
I used construction screws #9 x 2 1/2 or #9 x 3.
hope this helps someone who wants to build something themselves.
****Disclaimer****
Do this at your own risk, I do not assume responsibility if you damage yourself or your vehicle. Always work safe when doing work on your car!!

[@jonathanmarois9009]

Impact drills (what you seem to have) help prevent wood from splitting.

[@TJsVette]

Agreed. I have tapped them all first but the type of screw I used helped.

[@pamparker4047]

How many 2x4 s did you use

[@TJsVette]

To be honest I don't remember how many I used, they were all leftover from a previous project that I had.