How to Make Wind Turbine Generator 2000W Free Energy Generator

[@aleksije21feb]

Serial connection gives more voltage, parallel connection gives more current. Utilizing both types of connection makes the voltage and current get closer to the phase with each other, keeping the power same.

[@balakrishnabhat9977]

2000 W needs atleast 30 bulbs of 60W. Just one bulb does not prove it generates 2000W. Moreover such high speed is not possible by wind.

[@vitalinimattia-s3033]

i dont agre

[@24dev]

2000 watt means per hour

[@hidayetcelik1001]

Palavra 20 tane 100 w ampul yakarsa iki bin w olur en az 20 AMP 100 volt üretim yapması lazım tek telli bobin en fazla beş AMP akım verir çok zorlarsanız tel yanar video izlensin diye insanları yanıltıyorsunuz palavracısınız bilgisi olmayanlarda doğru zannediyor

[@spoiledbeans7402]

I think the point here was a honest attempt of a POC so weldone..

[@drsatan3231]

​@@24devyes and 30 watts per hour isn't 2000w per hour

[@mikejones-vd3fg]

its going to take years of energy harvesting to recoup the cost of all that hand winding, still worth it, well done.

[@MuhammadSaleem-id3vi]

Very good Demo 🎉🎉🎉🎉🎉👍👍👍👍👍👍👍👍 Make it commercially and supply it to the user

[@tareqkarim2926]

Thanks for sharing, would you please test the output of this generator using AVO meter.

[@milanivancevic6217]

Ako sam već vaspitam da vjerujem u postojanje boga nemoram vjerovati baš svugdje onome što ne vidim. Taj projekat daje neki napon nesumnjivo ali tokom eksperimenta se ne vidi baš sa svih strana potencijalno skriveno ožičenje. Da ova sijalica zasvijetli treba mnogo energije. Znate li Vi uopšte šta je to 2000W

[@Suavache]

Rất tuyệt vời với máy phát điện tự chế công suất cao xin cảm ơn đã chia sẻ với khán giả

[@FotojenikMurat]

Hello, how do you generally calculate the kilowatts and watts of the generators or alternators you make?

[@luckydubeinrc5165]

suck his thumb :) that thing cant deliver 200 wattsnvm 2000 watt lol , to weak magnets,, having high voktages is good = less amps, but in his generator the weak magnets is the downfall of the design , also the magnet are to farr away from the field coils , so i call Bulshitttttt 2kw my ass!

[@romanholms1607]

The number 23 is the day of the month. 23 is the number of which the coils were made, the diameter of the wire is indicated on the bobbins with the wire and not the number of manufacture, in your opinion the diameter of the wire is 1.5 mm or less.

[@romanholms1607]

Question to the author, wiring diameter, and another question: how many grams does the coil weigh, or how many meters of the line goes. If you start insisting, then 5 turns of the reins can be only 50 cm, and when 150 turns have already been wound, the length of the wire increases, one turn will not take up 5-7 cm as at the beginning, but more than 15-18 cm, so the question is how much does the coil weigh or how much? meters of wire goes to the coil. Thank you if you give an answer.

[@umarnawabkhan3434]

Could you please tell me, is this generator work as a motor if connected to electricity.

[@dimmer4955]

Take one zero out of a topic's name and divide it by two, and that's its true power.

[@SimonPlatten]

Does the copper wire have some sort of insulation on it? I mean the coils?

[@TheWickerShireProject]

You Need what's called Magnet wire enameled copper wiring. The coating where you attach other wires to bond to is scrapped off so soldering or crimping sticks to make contact.

[@TheWickerShireProject]

make sure it's for Motor windings.

[@abdullahnaggar]

Hello my friend, if you please, where did you get the white piece in which you put the wire coils and where did you get the black piece in which you stuck the magnetic❤❤❤

[@michelfernandez2554]

Nice work! Hey man pleasee , I am not an expert could you please explain to me the wiring, I felt lost with the colors. Greetings from Peru. Blessings!

[@milanivancevic6217]

Ma kakve ove mašine bile one ne rade baš ovako prosto kako autori videa pokazuju. Ovo su obmana video klipovi

[@earthssecretenergy2371]

look up 3 phase moter

[@himanshubhamre2543]

Hi ye project ke liye chahiye to milega kya

[@natalevitale244]

E' possibile conoscere tensione e corrente con cui si alimenta la lampada?. Grazie

[@parfaitkangalegeniecongola2993]

Bonjour félicitations je suis vraiment ému du générateur électrique très facile et très cool

[@joselara9232]

Why the diference in the number o coils and magnets? Can't be the same number of coils and magnets? For example a pair number like 12 coils and 12 magnets?

[@سبحاناللهالعظيم-ج6غ]

What is the liquid substance on those electrical wires, my dear friend? Thank you for listening

[@charledagnebalbuena2487]

Epoxy Hardener and Epoxy Resin

[@lloydleach1352]

What if you added a bedini sg motor to it, would that charge 8 to 10 batteries

[@vilsonib]

For maximum voltage output you need 9 magnets like 9 coils, not 10 magnets.

[@ReyseAwake]

Lo que necesita de forma vital, es un núcleo en el estator, porque un bobinado de cobre no es buen conductor de magnetismo. No en vano todos los motores existentes llevan un núcleo de metal en el estator, y cada bobina va enrollado en su propio núcleo 😊. Yo hice también uno casero, más pequeño que del vídeo, y me genera hasta 400V girando con una cuerda

[@ReyseAwake]

Antes cuando no sabía mucho, creía que un núcleo en los bobinados harían que el giro sea duro a causa de los imanes que lo atraen, pero resulta que no es así siempre en cuando los imanes estén bien fijados a la misma distancia entre cada imán y núcleo del bobinado.

[@y74156]

@@ReyseAwake chắc chắn là khó quay khi có tải, vì đây là máy phát 1 phase ,nam châm và cuộn dây bằng nhau cùng 1 vị trí

[@okaraaze1087]

Nothing to do with the number of magnets. In generators that actually work the voltage is proportional to the speed of the rotor, how powerful the magnet is, and how well the magnet field passes through the coils

[@binhanh296]

How thick was the copper coil used for this generator? I'm a newcomer so I'm not sure about this 😅😅😅

[@pcpatel01]

Use a 23 gauge enamel coated copper wire, build a farma and wrap 300 turns per coil, if you plan to use round magnets this is perfect if you plan to use rectangular then try triangle shaped coils

[@inno050]

Hy there The copper wires 23 number is that 0,35 mm ?

[@joaoalves2281]

Gostei do seu projeto legal joaoalves

[@belajarilmu2009]

the number of coils and magnets should be EVEN.

[@iftikharsoomro2108]

You are most of Ever Great

[@iftikharsoomro2108]

And Green

[@oscarnunezpena.4594]

Súper se le agradece muchísimo que este excelente proyecto, pueda ayudar a miles de personas que hoy más que nunca lo necesitamos, Dios les continúen dando conocimiento y puedan subirlo a cambio de nada, sólo un Like que nunca le falte en cada vídeo que puedan subir. MARANATHA CRISTO VIENE YA, AMÉN.

[@romanholms1607]

bright diameter of the wiring, and what are the dimensions of the coil.

[@josemanuelrodriguez4781]

Cordial saludo desde Colombia disculpe que posicion van los imanes? Le agradezco su respuesta Dios lo bendiga

[@8Ballpoollovers]

Alternate, north up, south up, north up, south up......

[@lethong1462]

Why not use a multimeter to measure Vol .?

[@johnhelbergreligionandarch3878]

Because he is bulshiting people

[@romanholms1607]

author of the video wiring number 23 where you can buy .23 number is the store number, or the street number, the number of something, the shelves in your home. If you give a video, then put out information for people, if you don’t want to give information, show it in your village.

[@FriedPotatoNugget]

What would happen if you used bifilar coils instead of the standard single wrap coils?

[@pcpatel01]

That sounds interesting should try it

[@FriedPotatoNugget]

@@pcpatel01 if you do, I’d love to see a video of the results! 👍

[@FriedPotatoNugget]

I have plans to use something like this powered by clockwork escapements and gears. A short tower outside could produce daily power, and would just have to be wound once a day like a clock.

[@pcpatel01]

@@FriedPotatoNugget this is a nice idea. And can use a small motor to rewind the clock after every 24 hours.

[@pcpatel01]

@@FriedPotatoNugget i was under the impression that you might do it 🤣🤣😂 nevertheless let's both try it am sure one of us would make it work for sure

[@somsakkulchanapakorn95]

Where is it free? when turning the drill

[@dbaznr]

Input power from the drill is less than 300w, so the output power can't be more than 200w.

[@PkGeorgian]

You might get voltage but what about current and frequency?

[@manserva]

No es un generador, es una forma de obtener voltaje que se puede usar para cargar baterias para un sistema inversor !!!!

[@ericyell898]

i also was wondering the samething,seemed like the distance between the magnets and coils had a pretty good gap (distance),but hey good job!

[@tarcisiore2146]

Questo sistema mi piace molto se non vi spiace gradirei conoscere le dimensioni costruttive per vedere come applicarlo al mio motore. Grazie Tarcisio Re

[@JHONNYMNEMONIC63]

Ciao Tarcisio mi è poco chiaro come indica la dimensione spesso del filo di rame . Nel video si legge "Copper wires 23 number " e il numero degli avvolgimenti per ogni singola bobina è di 300 giri . I magneti sono quelli che puoi tecuperare dai forni a microonde . Ne trovi 2 in ogni forno , e più precisamente all'interno delmagnetron ( stai attendo quando smonti un magnetron , non rompere la fiala centrale , contiene un gas molto pericoloso per gli occhi , metti occhiali e guanti ) te ne occorrono 10 per cui dovresti smontarne 5 in totale. Puoi anche trovarli negli autoparlanti ma sono incollati , a differenza di quelli dei forni a micronde, quindi potresti correre il riscio di scheggiarli quando li recuperi e hai il problema che ne dovrai sempre recuperare il numero necessario di stessa esatta dimensione . Nei forni a microonde non sempre sono di esatte e identiche dimensioni . Le altre dimensioni ti verranno fuori da sè , posando su un pianoe in cerchio le bobine . In questa realizzazione sono ad una distanza l'una dall'altra di circa un cm, usa un foglio di carta e compasso per organizzare sia la disposizione delle bobine e avere lo stesso riferimento per i magneti . Le bobine vanno collegare con inizio e fine avvolgimento alternato, ovvero inizi con l'entrata della prima , la sua uscita va collegare con l'inizio ( entrata esterna ) della seconda bobina e cos' a seguire sin quando non hai terminato il giro intero. Cerco nel sito che indica nella descrizione del video e ti richiamo se trovo i dettagli sullo spessore del filo . ciao.

[@kojak1207]

Так генератор не делается, на глазок все прикрутил. Здесь нужно четко выдержать размеры крепления катушек и магнитов,

[@wingedbull1257]

where's 2000W? proof it.

[@aliosman903]

good work, the copper how many millimeter

[@mikeshawbrook-selfreliance]

2000W per hour ? Day ? Week ?

[@MuhammadSaleem-id3vi]

How much voltage and current measured during testing? & rpm?

[@johnhelbergreligionandarch3878]

He bushittt

[@RezaAhmadi-di5fg]

سلام لطف کنید دروغنگید اقای محترم سیم مسی لاک دارشماره.۲۵/.چقدر امپر تولید میکند شما ژنراتورساختید۲۰۰۰وات؟

[@khamisokhan1071]

Nice good project sir I like

[@AL3X-qh3wx]

interesting project but, it is not FREE energy, u toke an help

[@fedhachantal3263]

How did you set the pole of magnet

[@felicisimomalinao1981]

Excellent!

[@qayumsheikh249]

Good bohat khob

[@LilDarkness-m4c]

Good job

[@rsskarthikeyanRtr]

What is the coil size you used?

[@sesa005]

Given no.23 rounded 300

[@sharlydales1762]

Haw much does volts does the generator do

[@elyaabe.inventions]

Thank you 👍 👍 👍 👍

[@Noneyobusiness851]

Is cheap graphite magnets junk . Your windings are efficient too There's a much better way to win this system

[@MultiLeo78]

Hi my name is Leo congratulations for the realization I would like to receive, if possible, information regarding the sizing of the copper coils (number of coils, section of copper insulated cable, dimensions of the same, quantity, etc., etc.) as it is not possible for me to try to create the generator in the absence of the criteria that serve to size it, also the quantity, size and shape of the magnets, in short, everything that is necessary in order to assemble a generator that possesses the parameters or rather that has the parameters of the system that will have to make it move, waiting for your kind feedback I wish you a good evening.Leo

[@johnhelbergreligionandarch3878]

You won't get it because he is bullllshit g you

[@Dark_Phoinix]

aliga imondezza!!!

[@shahabali5197]

Great video butt you haven't put 2000watt load

[@neilenriquez8678]

What is the measured voltage?

[@johnhelbergreligionandarch3878]

He also a bulshitter

[@skepticskeptic]

Exellent guy!

[@newchangeproduct5971]

टोटल बायर का वेट कितना है

[@niazahmedkhushkbaloch9330]

How many RPM this turbine generator

[@framrzparsi4067]

very good project.

[@jeanlerne-np2fw]

I from Haiti my country leave with no power right now I need help to help it

[@muhammadusmanrajput6910]

Good MashAllah

[@hyunjunjo6364]

Are you genius.

[@royallan3717]

Very clever but another light bulb moment

[@Erhan_Cakmak]

2000w generator ?... 60w lightbulb ! ... good ... :-)

[@Abdulhadi-wl6kq]

Could you please explain the winding connection?

[@keto4life197]

+ and - i guess as other connections

[@harrytopia282]

All lies and bullshit, the bulbs would have gradually got brighter as the the drill powered up not flicker and then full brightness.

[@norinoor8046]

Nice 👍👍👍 Sir 👍👍👍

[@abstudio2088]

Bhaijaan yah 220 hai kya 110 hai bhai yah bata do

[@himanshubhamre2543]

Hi

[@kbte6116]

good job ❤❤

[@datacreativechef5249]

Simple 👌👍

[@MNATURAL-w6z]

Well done

[@pimpalkhute]

What is the RPM of disc?

[@chandranathbhattacharya1031]

এটা উইন্ড টারবাইন হলো না😅🎉তোমার মডেল কে ভালো বলছি😅কিন্তু আমি উইন্ড টারবাইনের জন্য পাগল আছি,,, মানে বহু লোককে বলছি, কিন্তু ওই পাগলের প্রলাপ😅🎉 ব্যাপার টা হলো আমি আবিষ্কার করেছি বলছি না❤,,,, বুঝেছি, আর সাইকেল, মটোর সাইকেল, চার চাকার জন্য খাতায় ডিজাইন করেছি, কিন্তু আমি চাইছি,, ট্রেনে এই সিস্টেম থাকুক,, তুমি বোঝো,, ট্রেনে চলন্ত অবস্থায় কি পরিমাণ হওয়া লাগে, সেটাই উইন্ড, কোনো এক উইক এন্ডে, তুমি যদি মোদীকে বোঝাতে পারো, পি এম বিশ্বকর্মা তোমাকে হে ল প করলেও করতে পারেন,, আর না হলে দই কর্মা খেয়ে চলে এসো,, কিন্তু ওই উইন্ড টার্বাইনের সাহায্যে ওভার হেড বিদ্যুৎ, বা ডিজেল ছাড়াই বা সহযোগে, ট্রেন অনেক উন্নত পরিষেবা দিতে পারে এবং নিঃসন্দেহে খরচ কম পড়বে😅😅 জীবনে উন্নতি করো,, আমার মতো, জগন্নাথ হয়ে বসে থেকো না,,, গুড লাক, গড bless you❤

[@prabodhsharma405]

इसको कितने में बना कर दे दोगे ?

[@defequenews5484]

Une lampe de 2000 W ?

[@jeanlerne-np2fw]

Why do you used that liquid

[@familia699]

hola ¿puedes decirme el diametro o la seccion del alambre n° 23 ?

[@jeanlerne-np2fw]

I try it's doesn't work my brother

[@محمدالخطري-ع6ن]

هل ينتج تيار متستمر أم تيار متردد

[@fauzichanel7409]

MANTAB.....

[@tuuljargal2629]

Nice👍👍👍

[@monammahto2145]

One 10 bulbs used in this project..

[@santolara3089]

Abrá que conectarlo a un carro de fórmula 1 y puede que consiga estallar la bombilla 😁😂😂 con 100,000 mil watts

[@Taufikraja4428]

Good

[@romildosantana792]

Sem uma ponte retificadora, eu não acredito que isso dê certo.

[@ceasanselena9745]

drill ko energy chahye ghomny k lye, there is no free energy

[@madllybangali]

i tried it but not get any result

[@SJ72_Argo]

Cewki bez rdzeni są mało wydajne.

[@kuavivo8061]

Maybe 20watts 🤣😂

[@nizamoo4801]

nice

[@bobcole3852]

Turn off the pulsing audio

Ce grosime are firul de cupru

[@MV-ir7sk]

You obviously don't understand the term 'free energy'...cause this ain't it.

[@alternativeenergyresearch4857]

9:47 9:47

[@CarlosDaniel-qp1hc]

U kara nem colou os irmas i tá rodando com uma parrafusadera é mito

[@ВалераРовбо-э3е]

Статор і ротор крутити в різні сторони.

[@antonanton5503]

This is not free energy my friend