How To Make Your Ford XR6 Turbo Dose!

Today my good friend shows you how to make your xr6 turbo hectic muzz dose
3'' Silicone Joiner- www.ebay.com.a...
3'' 90 Degree Pipe- www.ebay.com.a...

[@stephenrogers9664]

Love seeing new Aussie’s showing the falcons 👍 Well done Nice cars

[@RossReviewsau]

This sounds mint mate😍😍😍

[@JoshVisualsx]

Thanks bro 🥰

[@corywatts80]

Ross reviews is my dad

[@jamesthebond0072]

@@corywatts80😂😂😂😂

[@rx720bfc]

My old BF with a 35/82r only (16psi )i used a stainless 90° and just used a mesh gorze to stop contamination... try stainless man you get that high pitched dose.

[@AliTajik814]

Hey man my turbo is 4 inch how did u fit a 3 inch to it? Did u get a 4 to 3inch silicon?

[@anthonywhelan8373]

One way to fuckup the turbo and like a few states wear out that engine way quicker with no filtration on the intake air but by the sounds of it you know best

[@Benjay1975]

i'd be running a filter on the front of that turbo, it will still make the same sound and it will stop debris potentially entering.

[@JoshVisualsx]

Yeah definitely recommend doing it, just didn’t have a filter on hand at the time

[@johlykonts7419]

If this ain't love, I don't know what is mate. That right there is proper minttt! ❤️

[@carfanatic4397]

Just noticed the plates on the silver ba. I've got 6TJ3T 🤣

[@JoshVisualsx]

Nice mate!

[@nonsensicalvin]

Smiles for absolute miles, how good is a dose ahaha

[@bslothed3211]

Can this hurt the turbo's turbine? Worried about bent blades and shit lol, if all safe, heck gonna do it but will have a filter over it

[@outlawdingo3020]

This 5 minute video felt like a full 30 minute tutorial

[@JoshVisualsx]

That good or bad?😂

[@outlawdingo3020]

@@JoshVisualsx it was full detail of a 30 minute video in 5 minutes because there's no random crap talking in it like most people😂

[@SimplyNordish]

What size door stop is that?

[@IGETvapes]

Great video.bgreat explanation.

[@JoshVisualsx]

Thanks mate 🙂

[@AliTajik814]

@alireza_ta: Hey bro I have an upgraded turbo. Can I still put a 3inch pipe using a “4 inch to 3 inch silicon”?

[@jaydenhemimorleygrey3543]

Do I have to block the crossover?

[@Mr-gl1di]

i want my fg to sound like that XD

[@jacobharimate3642]

Im gonna do this when i get my falcon 😫 it sounds so good

[@Tkay_One]

Ordered my pipe today I can’t fuckjng wait bro might put a small pod on it though don’t wanna suck up any nastys

[@ladebrah6963]

Music to my ears

[@owenmicallef4173]

Should make a before and after sound even making the video now would still help people out

[@noeljackson1501]

Hey mate on a ba it’s literally just adding a 3 inch bit and elbow and nothing on the other end of the elbow? And also just plug the blow of valve ? Just to confirm if I’m correct lol

[@JoshVisualsx]

Yeah you can put a filter or have it exposed, and yeah plug the bov

[@nezihkaya2309]

What brand intercooler is that?

[@JoshVisualsx]

Mace engineering 🙂

[@JackJack-vz5cf]

What turbo do you have?

[@VT97Calais]

not bad, L plater with a worked XR6turbo !

[@cunninglinguist182]

He has a wheelchair waiting.

[@fordfalconkings31]

does that shorten the lifespan of your turbocharger?

[@liamrobinson6063]

a little bit

[@andre9302]

would slapping a cone filter over the 90 bend effect the noise of the dose? open intake into the turbo is asking for trouble in my opinion

[@JoshVisualsx]

Nah doesn’t change the sound at all

[@andre9302]

@@JoshVisualsx i got a tune on my car, will putting a dose pipe fuck my tune up? and if it does what would be the cons? be honest please

[@s4ss.m8]

@@andre9302 shouldn't unless your cars stock mate, if all you're doing is taking that plastic and rubber ANTZ 90° off and swapping it for a metal one it won't do anything, purely sound. If you're going from a stock style to an ANTZ Battery Relocation style then I'd suggest a tune. But if you've got the existing battery Relocation style and already tuned it won't do shit, just make your dose louder.

[@leviward3780]

Would it be a bad idea to face the elbow down

[@s4ss.m8]

Yeah ..

[@Flamerang]

doesn't removing the blow off valve. decrease the life of the turbo?

[@JoshVisualsx]

From my personal and mates experiences it hasn’t made a difference.

[@Flamerang]

@@JoshVisualsx oh wow okay, just would've thought with that excess air pressure over time would've broken the turbine.

[@JoshVisualsx]

@@Flamerang Nope, but when it flutters while you’re on throttle which is compressor surge that’s when it destroys turbos, off throttle is fine

[@Flamerang]

@@JoshVisualsx Yeah Cheers, that makes sense.

[@n1njaweedman]

at lower boost all it does is mildly decrease the life the of your turbos thrust bearing, at higher boost 20psi and up i would use a BoV

[@Djmixemdiscos]

No air filter WTF!

[@JoshVisualsx]

Would have to be really unlucky for anything to enter it lmao

[@WhyForWhatNow]

That exhaust note is lovely How far from stock do I need 5o be for my BA too sounds that sexy Edit Also those chirping launches are the dream

[@JoshVisualsx]

Fg have a different exhaust setup so not sure mate, all that’s done to my exhaust is a middle muffler delete

[@WhyForWhatNow]

@@JoshVisualsx cheers for the reply anyways boss take it easy

[@temzrceez5146]

Do u just block the vaccine lines?

[@88blueonelove]

So does blocking the bov actually affects and harms the turbo it self? Im running 300kw on 16 psi

[@JoshVisualsx]

I have never had an issue with it, been running it like that for 2 years on my ba until I went bigger turbo. Been running no bov on my new one for 6 months 15psi🙂

[@jeepnutscotty]

@@JoshVisualsx 😂 the shaft end play will tell the story...

[@JoshVisualsx]

@@jeepnutscotty Never changed over the 2 years I had it

[@jeepnutscotty]

@@JoshVisualsx so your eyeballs are micrometers? 🤣 i wish i was half as talented as you are

[@waydegod]

I blocked mine, month later connected it back, definitely lost some power wirh it blocked, it's fine now connected.

[@eclipsepheonix8030]

Yes

[@bosnianspetsnaz3457]

Quick question, where is the rocket cover breather hose being connected to if not the air intake?

[@peppino5413]

no rockets here mate

[@tagyoureit4500]

Doing this actually slows Turbine speed and can increase lag a bov is better for on/off throttle response

[@JoshVisualsx]

Well most falcon owners aren’t competitive circuit racers so i can’t see how bad a little lag could be

[@tagyoureit4500]

@@JoshVisualsx performance is everything track or street the boost that you are Sneezing back out the turbo can actually stall and or spin it backwards which isn’t the best option for performance

[@JoshVisualsx]

@@tagyoureit4500 They don’t spin backwards but ok😂

[@tagyoureit4500]

@@JoshVisualsx with enough boost it can been proven but most likely not on low boost applications

[@Andyc351]

You know this is total bollocks right?

[@darwonboyful]

How are you getting away with driving an fg xr6t on your p plates?

[@JoshVisualsx]

I`m on L plates :)

[@damienanderson1685]

Auto or manual

[@ashleyclements654]

Hey man just wondering if you painted your own rocker cover and if so what paint did you use.

[@JoshVisualsx]

Yeah just used VHT metallic paint

[@ashleyclements654]

@@JoshVisualsx thanks for that man much appreciated. What colour did you use.

[@JoshVisualsx]

It’s their orange high temp metallic colour, unsure of exact name sorry haha

[@ashleyclements654]

Okay thank you for that I found one called burnt copper which looks pretty close so I’m gonna go with that

[@JoshVisualsx]

@@ashleyclements654 Yeah that’s the one I’m pretty sure

[@Itscastlebravo]

Why you need the 90 bend on the tube ? A straight tube won’t give you the dose ?

[@JoshVisualsx]

Only thing that fits, tried a straight pipe but hits the power steering res

[@Itscastlebravo]

@@JoshVisualsx thanks i will try 👍🏼 make more videos of the sound of your car bro it sounds good

[@ryderflynn1057]

hey mate could u link your parts and how much it coast

[@JoshVisualsx]

In the description mate

[@cuntbot698]

Can learners and pplaters drive an XR6 Turbo?

[@JoshVisualsx]

Just learner's in Vic :(

[@s4ss.m8]

P platers can in ACT L platers can drive whatever they want in any state, mate was driving his dads VF GTS in SA and i drove my old man's SRT 8 harrop jeep

[@darryllspalding5211]

The art of NOISE????????????????????? Any power gains out of that???????????????????????

[@JoshVisualsx]

Maybe, but really for the noise :)

[@hayden.griffiths]

So Josh what have you done with your vacuum line ?

[@JoshVisualsx]

Just put a screw in it🙂

[@nathanobrien7257]

@@JoshVisualsx can u please make a quick video on how to do it pls bro

[@JoshVisualsx]

Hey mate, send me a message on Instagram🙂 04_JET

[@ahmadabdurrehman528]

Did you get an answer as i am stuck there too

[@hayden.griffiths]

@@ahmadabdurrehman528 put a stainless steel screw in the hose and cable tie the boost line out of the way , or use the boost line for a boost gauge

[@markhayleybeadon]

Dose has no meaning to what your saying. Someone just made it up. It's called a dictionary. Sweet car.

[@DubD615hduw]

And all of which eventually kills the compressor 🤦‍♂😂

[@JoshVisualsx]

Tell me who’s damaged a turbo

[@ilikechickensausages2075]

Turbo Taxi

[@JoshVisualsx]

Yessir

[@cjandersson1313]

P plate legal? Haha

[@JoshVisualsx]

Nah haha

[@peterkelly2220]

dont do this, you really need an air filter

[@davidwilkinson4025]

??? Turbo on learners da fuck

[@jeepnutscotty]

Welcome to “how to fck your turbo in one simple step” & “how to dust your engine”..... why youd willingly destroy your own shit is beyond me... but hey, seems your way smarter than Ford Engineers 🤷‍♂️

[@JoshVisualsx]

Hey mate, seems you have no idea and have never done it🙂 Feel free to show me someone who has destroyed their car from doing this, been 2 years on mine and longer on mates cars with no issues. How about the thousands of other people who do it and have no issues?

[@jeepnutscotty]

@@JoshVisualsx google it Einstein... or simply ask ANY reputable performance workshop about it.... i learnt the hard way, n your not far from it yourself...

[@yajg4432]

Soo true bro

[@cunninglinguist182]

These muppets have zero understanding of the laws of physics. Let's go from 15,000RPM to stationary in a heartbeat. What could possibly go wrong?

[@jamesthebond0072]

This would suck now I’m probably being on your ps and not being able to drive a xr6t 😂🥹

[@JoshVisualsx]

Still drive it though😂 green p’s now and no dramas

[@josephmartin4057]

@@JoshVisualsxjust curious but if ur driving it on your P’s, do you put your p plates on the car? I feel that would give it away to the coppers