As I assisted LMS Productions with making some of his engines stronger I thought I would make a video showing the technique I suggested to see if it can help you if you're in a similar situation! I hope this is helpful!
Пікірлер: 63
@freedomcharades5 ай бұрын
This is just the right video. I need. The same thing is going wrong with my tummy Percy. Just the axle gear is not tight enough to the axle.
@caley812studio5 ай бұрын
With Percy, the cog may be cracked so the solution is to add some super glue into the crack
@raventhescottishredengine20055 ай бұрын
I did the same thing with most of my engines like: Donald, Douglas, Oliver, Emily, Plarail Stanley, Molly etc.
@JamesTheSplendidRedEngine5 ай бұрын
thank you for this tutorial! it was very helpful
@caley812studio5 ай бұрын
No worries, glad I could help!
@Kiy11235 ай бұрын
Do You Plan on getting Freddie, Sir Handel, Rusty, Kana, Dart, Stafford, Replacement Hiro & Victor?
@caley812studio5 ай бұрын
Kana - NO. As for the others, they're pretty easy to get (maybe except Sir Handel). At the moment, they are not massive priorities, especially considering I am planning to reintroduce Plarail Hiro at some point. But I may get Rusty soon
@stevennorthrup57905 ай бұрын
I might have to try that sometime. Does it also work with the Trackmaster (Fisher-Price) Engines or just the old models, like Tomy or HiT Toys? Not sure about TM2, tho.
@caley812studio5 ай бұрын
Well with TOMY and Hit Toys models of that type, the plastic is lighter so it can move more easily, unlike the Mattel ones. It is very hard to get movement out of the axle on a Mattel model. With TM2, you can glue in between the two axles to make a engine stronger, but not this trick
@chrishaushalter69835 ай бұрын
Oh no the oldest engine I have is a mattel it's a good thing I didn't do it
@caley812studio5 ай бұрын
@@chrishaushalter6983It might be possible, but you easily hurt yourself while trying it with a Mattel model, so I wouldn't recommend it
@stevennorthrup57905 ай бұрын
Ahh, makes sense.
@gamergod0915 күн бұрын
Can you use anything else to push the gear back in place?
@caley812studio15 күн бұрын
A small coin might work
@gamergod0911 күн бұрын
@@caley812studio I tried it on Mighty Mac with my screwdriver, but I almost cracked the gear.
@gamergod0911 күн бұрын
And I don't want to do that and I will either: 1 - Fix it myself, or 2 - Send it to Custom Trackmasters and tell him what the problem is so he'll understand.
@SplatterStudios156728 күн бұрын
Is there a way to fix Tm2 engines to make them stronger?
@caley812studio27 күн бұрын
@@SplatterStudios1567 I would recommend supergluing the axle by opening up the cog and inserting glue in the middle
@Libyan_Islamist3 ай бұрын
So basically you have to shift one gear to the other gear?
@caley812studio3 ай бұрын
Technically yes
@Libyan_Islamist3 ай бұрын
@@caley812studiodo you believe that it is a problem when the TM1 engines are fighting on TM2 track and are struggling?
@caley812studio3 ай бұрын
@Libyan_Islamist It is only a problem if the axle is broken, otherwise they're fine on TM2 track
@raventhescottishredengine20055 ай бұрын
Do you live in the United Kingdom?
@JamesTheSplendidRedEngine5 ай бұрын
it’s a personal question don’t you think?
@caley812studio5 ай бұрын
Yes
@raventhescottishredengine20055 ай бұрын
@@caley812studioamazing I also live in the UK too.
@raventhescottishredengine20055 ай бұрын
@@JamesTheSplendidRedEnginemaybe, anyway how are the other WSE competitions doing?
@caley812studio5 ай бұрын
@@JamesTheSplendidRedEngine It is, but I personally don't mind being asked
@LMSProductions6094 ай бұрын
812 Studios I have some bad news I lost Hong meis chassis and I can't find it anywhere so chances are Hong Mei will not return anytime soon
@caley812studio4 ай бұрын
I'm aware, and although I'm still a bit dissapointed, it's nothing major, so I can live with it
@LMSProductions6094 ай бұрын
@@caley812studio same
@chrishaushalter69835 ай бұрын
I just watched the live that just finished
@caley812studio5 ай бұрын
Yep, I saw you in the chat
@juani.rodriguez73265 ай бұрын
Why don't give him a drop of grease inside his gearbox?
@caley812studio5 ай бұрын
I'm guessing you're suggesting this to make him run better. I suppose I could at some point
@juani.rodriguez73265 ай бұрын
@@caley812studio you should swap the gear on the motor's shaft too. If it's cracked, he's loud and may not do the clicking noise when you try to stop him.
@caley812studio5 ай бұрын
@juani.rodriguez7326 Well the strength of an engine like Donald is determined by the cog on the wheelset, not in the gearbox. His gear may be loud, but it isn't cracked, so I'm not planning on replacing it unless it was cracked
@juani.rodriguez73265 ай бұрын
@@caley812studio If you say so :)
@caley812studio5 ай бұрын
@@juani.rodriguez7326I could easily be wrong
@Trackmaster12 ай бұрын
This is the video where I found tour channel
@Trackmaster12 ай бұрын
I will try to do that with Salty and Splish Splash Sploosh Emily
@caley812studio2 ай бұрын
@@Trackmaster1 I don't think it would work with SSS Emily because she is Mattel