How to make Your Own Holographic Silicone Mold | A Mold that Can be Used in so Many Ways | Explained

#holographic #holographicmolds #epoxyresin
#holographicmold #resinart #Epoxyart
Hi every one today we have a fun video on creating holographic Effect on resin with out any molds. We all have created holographic resin art by using holographic papers but this is Different .
I will be sharing many more videos on this technique .
This technique has been used on chocolates using Diffracting grating sheet .
Hope you find it fun and create your own magical molds.
Diffraction grating sheet
Amazon link
👇
amzn.to/37MNctT
Silicone mould supplies:
amzn.to/3lftr10
Music is copyright free.
A tip Jar if you like to buy me a cup of tea :) ☕
paypal.me/teaandart?locale.x=...

[@carolstewart1704]

Idk if it has been mentioned, but u don't necessarily need to make a mold for Holo effect... U can place a piece of the Holo sheet on top of a curing resin piece... (Making sure it doesn't get stuck inside the resin but that it does make contact where u want the effect) and once cured u can pull the Holo film away (and it's reusable) to have the effect transferred to the tip of the resin piece.. alternatives would be to make a resin piece and do a dome or coat of clear over it then lay the Holo film on it til cured ( remember the longer u let it cure before pulling it off the better the effect will be.. for instance if u take it away before full cure, it's likely that the resin will still be shot enough that it levels out again or is easily marred and smooshed by fingers etc) ALSO another alternative would be to have a flat resin piece MADE then pull the clear backing off of the Holo film and sticking THAT BACK SIDE down onto the resin piece (Holo side would be facing up on the resin piece) then mold the entire thing so u can make exact copies with this mold 🥰 say a coaster u stuck the Holo onto.. u would pour the mold with the coasters Holo side facing up and when u pulled the piece fm the mold u can use the mold to make a set of matching coasters😅

[@kimquintero6261]

What Holo film could you use?

[@Julia_Mwa]

although this is good way, i would probably just use the holo mould because you can use it as many times as you want and it wont run out

[@carolstewart1704]

@@kimquintero6261 look up "defraction sheets" 🥰 sry I just saw your question right now! 🥺

[@carolstewart1704]

@@Julia_Mwa u can reuse the same sheet of defraction paper as well tho 🥰 it's also reusable. But yes! There's all kinds of ways to do it! It's all about preference and sometimes ease of use for different projects of course! 💕💕

[@kimquintero6261]

@@carolstewart1704 I bought a sheet and tried it but it didn’t turn out very good. I’ve also bought a holo mold and it’s not very good either. I’m sure it’s me more than the products but I love this effect and want to figure out how to get a really good holo effect!

[@kaijuk]

Finally someone made a vid thank you, people are selling small puddles of silicone or resin that that have dumped onto a diffraction grating sheet and selling them as magical holographic inserts for resin work and other crafts, it's basically a few pennies worth of resin or silicone they are selling at a massive profit when if they bought a diffraction grating sheet for £4 they could make as many as they wanted. Great vid 👍🏻☺️✌🏻

[@teaandart]

Aww thankyou so much its really fun and easy once you get know how they are made .I can't stop making these molds .😁❤

[@naptimecreations]

Very cool 🤗🤗🌈🌈 the the rainbows on this film. Amazing 🌌🌈

[@teaandart]

Thankyou so much ☺

[@naptimecreations]

@@teaandart 🤗🤗🤗🤗🤗

[@tkaneen]

Wonderful and easy. Will be making today for projects. Thank you.

[@funo6581]

Thank you! I’ve been wondering how these holographic molds were made. I knew it wasn’t regular holographic film, I just didn’t know what it was called. I just bought some silicone to make molds, so this is great! I can’t wait to try it! I love diffraction light. I made stained glass windows for our family room and the bevels in the glass would reflect the evening sun bouncing off the ripples in the pond that was just beyond our backyard. Even though the bevels were clear.. dancing colors would reflect off our walls. It was magical

[@teaandart]

Your very welcome so glad you found it useful 😊 👍 thankyou so much for watching 😊

[@lauriewatson2822]

Beautiful!

[@surrilv3381]

Amazing to know how easy that was !! 😌 Super amazed ! Great video . TYSM for sharing this. great job!💕

[@teaandart]

Your very welcome I am glad you find it useful 😊 🙂 ☺️ thankyou so much for watching 😊

[@LiveSleepResin]

Fantastic. Off to do this right now!!!

[@calissaobviouslycannotdeci7419]

Thank you for sharing your processes. I really enjoy your videos and find them very intriguing! Keep up the GREAT videos!!! XOXO

[@teaandart]

Thankyou so for your kindwords and an amazing feed back 💜❣❤💗

[@janesavage4733]

Thank you for your help and information.

[@teaandart]

Thankyou 😊 😊 😊 😊

[@thecrapartistx]

Ya just blew my effin' mind!! I've been pouring for a loooong time and never did I ever see anything this dang awesome.

[@teaandart]

O wow thankyou so much really means a lot 💗 💓 💕 💖 💛 ❤

[@thecrapartistx]

@@teaandart no way!!! Thank you for posting this. I've been playing with it for a week now and i haven't made any "thing" yet but the effect in person is so much more incredible to see!!! Keep pouring!! You are awesome!

[@FolleDart]

Très beau travail bravo

[@kimmie44]

Wauw this is sooooo gorgeous🤩🤩 and thank you so much for sharing 🙌❤️❤️

[@teaandart]

Thankyou so much ☺ 💓 💖 💗

[@annettehill6264]

I watch you all the time but I was a little confused in what you did. I’m not sure why so I will continue to watch this over and over and maybe I will get it. I enjoy what you do and love them. Thank you for sharing.

[@dafish1982]

Evan and Kaitlyn also did this trick. Their explanation was that what causes the halographic effect was microscopic surface texture. So the silicone simply recreates the texture by cutting on top of it.

[@tinytwistresincreations5820]

This is nice

[@abitofeverythin3535]

Hello very nice looks lovely what will you use it for plz?

[@cropduster001]

This video is obviously made for someone knowledgeable about this effect. Can someone please explain exactly what this holographic stuff is and how it works? Thanks

[@carolstewart1704]

Ty for the link to the correct film 😁 the one I purchased previously worked for some resin stuff like I wanted, but wouldn't work to make molds.. its a bit thicker and has something that inhibits the silicone fm curing on it😅😂.. so I'll save the old one for resin only and I'll use this new film for the molds!! 🥰🥰🥰

[@teaandart]

Your very welcome I am really glad you found it useful. Yes there are few different types of products available for this effect but this film is really gives the best results. Thankyou For Watching ❣

[@brittanyslife8138]

Where can I purchase one from the us.? I purchased the one from Amazon and it totally did not work out just peeled right off with the silicone. I was left with a clear film of plastic.

[@teaandart]

@@brittanyslife8138 there are links available in description from where I bought but just to check make sure the right side was facing the silicone.

[@carolstewart1704]

I'm kind of scatter brained rn but wanted to say this in case it was what helps! 😅 There is a protective layer on the backside of the Holo film, what happened maybe is that so far u have only pulled off that film.. try to see it there is ANOTHER layer to peel away.. the one that actually has the Holo design on it😁 I did this before!! Once I realized that there was another layer I pulled it away and THAT gave me the silicone insert WITH the holo!! 🥰 And definitely need to make sure the holo side is what is getting covered with the silicone 🤗 hope that helps?!

[@bethanyblack2256]

Love your videos! All your art is so beautiful 💖Does the effect of the sheeting fade after using it to make molds a few times?

[@teaandart]

Thankyou so much ☺. I am have multiple holographic molds used them many times still they are perfect .I am actually waiting on them if they fade so I can update but they still give amazing results.

[@parvinkiany6945]

I have a question, I would appreciate it if you answered me. is it sticky on the side that has gotten a pattern? the mold you made I mean.

[@ThweJoanne]

It’s so pretty! Could I use iridescent clear film or must it be diffraction grating sheet?

[@teaandart]

Thankyou so much ☺ it should be diffraction sheet and and if you cannot find this sheet you can use rainbow window film it has a different look but look amazing as well.

[@suegore5929]

You can cut it to fit inside molds, too!!

[@teaandart]

Yes I did in previous video where I made cut to size to fit molds 😊.

[@luischong8147]

Thank you very much for sharing your knowledge, my acrylic blanks have engraved drawings, how can I make them holographic? by putting the sheet on top the lines would be covered, please help

[@teaandart]

Your very welcome and thankyou so much for watching. Here Is a tutorial on similar technique I tried on wood blank .Might be helpful 😊. kzbin.info/www/bejne/d4nNc6aYlsaJoNU

[@beverlythomas4119]

Help. I tried this using Lets Resin, Silicone rubber for mold making. I put my vynal inlay down then poured the silicone on top of it, let it sit over night. When I looked at it there was nothing on it, just the clear silicone. What did I do wrong? There was only one side with the hologram on it, so no confusion there.

[@karoliinalitzen6266]

Hello! This looks amazing! If i have clear (no glitter or coloring just resin) and flat resin piece, like a coaster, and i put this holo mold to upper side of my piece, is holo effect also visible from the back side of the piece? Have you tried that?

[@teaandart]

Thankyou so much ☺ 💓 💖 Yes it will show on back as well if the resin is clear .You can try with transparent pigments also.

[@teaandart]

If you watch this video in the beginning I am showing the coasters both sides and you can see the effect on back also. kzbin.info/www/bejne/h6ezlH9rabCbl7s

[@lorihouse1766]

Can you tea0ch how to make holographic mold like hears stars ect...? Please...i cant find any.

[@teaandart]

Sure its a long due request I received so will definitely work on that.

[@janeash5328]

I can't find the holographic sheet anywhere. Where can I get it from please.

[@normandothegreat]

No release agent?

[@tygerstripes]

I know this is a bit late to the party, for the white border you made, is that just caulking like you get from the hardware store?

[@teaandart]

There is always a party time when we are talking about holographic effects 😁😁😁😁. Yes but its 100% silicone.

[@cdaitch]

Could I attach this film to an item to mold, aka to a cube or pyramid, and then mold it and end up with a mold that will cast holographic items?

[@teaandart]

Yes definitely you can 🙂

[@shannonmarie6227]

I need to know the science behind this.. how is this possible?!? Lol

[@genaelgie]

Where can i find that sheet?

[@QuietBloom]

Are you using the soft, extra-soft or medium mold strength please?

[@teaandart]

Hi I am using the soft one.

[@detroitplayboi]

Any idea how you get different holo patterns?

[@teaandart]

Yes you need different grating sheet with different patterns.

[@mirkomoro5984]

Ciao cara. Voglio dirti che sei bravissima. Purtroppo non capisco le tue spiegazioni perché parlo solo L italiano. La tua è una tecnica straordinaria e mi piacerebbe impararla. Mi potresti fare un corso in italiano pagando. ? Resto in attesa di una tua gentile risposta. ❤️

[@teaandart]

ciao grazie mille per le tue parole gentili. Sto usando Google Translater per leggere il tuo messaggio. Sono felice che ti sia piaciuto il mio lavoro :). Dato che parlo solo inglese, non è possibile per me parlare in italiano.

[@d00daniellapaz]

Can you make a tutorial on how you use it?

[@teaandart]

Yes I have few videos here is one of them on how I use this mold. kzbin.info/www/bejne/j6PalYpjrq-brKc

[@deidrebemister9209]

How do you use these? I made several and I don’t know what to do with them.

[@teaandart]

There are a lot of ways to use them here are few videos on how I use these more coming kzbin.info/www/bejne/j6PalYpjrq-brKc kzbin.info/www/bejne/p4LXcp2sadOml7c kzbin.info/www/bejne/d4nNc6aYlsaJoNU kzbin.info/www/bejne/q4rTeIiwi5t9i9k

[@melissavogel42]

I do have a epoxy coaster with this effect. Can i make a mold out of this epoxy piece? Or does it not work that way?

[@teaandart]

Hi yes you can the holographic will transfer it self to the mold.

[@debbiecarrier701]

Can you share link for silicon mix and the holigraphic film you used? Thank you for making this video🙂

[@teaandart]

Thankyou so much for watching 😊 both links are available in description ❤ I am glad you find it useful 😊.

[@marilynjohnson1915]

I'm having a hard time to find holographic silicone

[@teaandart]

@@marilynjohnson1915 you need to find Diffraction grating sheet.

[@teaandart]

@@marilynjohnson1915 www.ebay.co.uk/itm/6-x-12-Diffraction-Grating-Roll-Sheet-Double-Axis-13-500-l-in-Physics-Light-/272934245381?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0

[@debbiecarrier701]

@@marilynjohnson1915 you can make your own. Get two part silicon mix. You will need holographic film. Lay film on flat surface holographic side face up, protecting around the edges. Pour Your silicon mixture directly on top in a thin layey. Let dry overnight is best. When you remove it will have transfered onto your silicon mold. Now you can cut into shapes and use a border around your piece. I used hot glue so the resin does not leak through. Pourur resin on top of the mold and it will transfer. I had to figure this out on my own. Wish I could show you my creations.😍

[@dorothytucker9305]

If you pour it thin enough, can you take your holo silicon and make hemispheres or jewels out of isomalt?

[@teaandart]

It can be tried might work 😊

[@dorothytucker9305]

@@teaandart thank you soo much! I'm gonna give it a try!

[@rkhnd51]

Can you tell me in ounces how much you mixed up for a sheet this size, please?

[@teaandart]

Sure let me check through my notes and get back to you on measurements.

[@rkhnd51]

@@teaandart Thank you. It doesn't have to be exact. I just don't want to make too much.

[@teaandart]

@@rkhnd51 Hi used 200 ml of silicone for this sheet size.

[@stilusalexia]

sorry i don't know what this holographic thing is and i don't understand which side of it is up, i speak another language and even with the subtitle i don't understand, is this a sticker? a foil?

[@teaandart]

Hi this is plastic sheet that has holographic lines embedded on the sheet . So when you pour silicone on the right side it transfers the holographic effect on the silicone. Then when you pour resin on that mold it transfers the holo effect on to the resin . Its basically Diffraction grating sheet .

[@teaandart]

The right side is when you rub your finger it makes a squeaky sound other side is plain and shiny .

[@marilynjohnson1915]

Hello Tea and Art I'd like to know where did you get that holographic sheet I searched everywhere and cannot find it I like to make me some moles for that I searched high low and still cannot find it can you please help me I live in Wilson North Carolina my name is Marilyn Johnson thank you have a blessed day God bless you and be safe and I love your shows all your videos that's why I'm coming to you for information please help me.

[@teaandart]

Blessings lovely soul, Thankyou so much for your kind words and liked my creations 🙂🌙❤❣. I have linked amazon and ebay links for this sheet . Also I have found these on Ali express as well just purchased last night but I have still to get them and see if they work same like these.

[@teaandart]

@@alkanalkan9128 Hi I did find on aliexpress and it took 3 months to arrive but its slightly different from this sheet so I need to check first if its reliable.

[@teaandart]

@@alkanalkan9128 yes don't worry I will be making a video on this in detail even If it didn't worked.😊

[@teaandart]

@@alkanalkan9128 hi there its going up today in an hour 😊

[@Jontif]

I tried this but the silicone just sticks to the grating sheet ? And I can’t get it off Is there something I’m doing wrong ?

[@teaandart]

Hi it shouldn't be stuck to the silicone I have made several molds and never came across an issue like that.

[@Jontif]

@@teaandart how long after you putting the silicone on do you remove it from the sheet ? Also is your silicon soft medium or firm?

[@nadiaito6685]

You put the film with protection or you put without protection, and i dont uderstand the sides, Sorry, help

[@teaandart]

There was no protection I was just making the mold from rhe diffraction sheet. Facing it upwards so the holo transfer it self to silicone 🙂.

[@brittanyslife8138]

I ordered the diffraction sheet from Amazon and it was a total waist of money! Where did you get yours from mine just peeled of completely with the silicone and I was left with nothing but a clear piece of plastic

[@teaandart]

Hi Did you use the right side of the sheet because this happens when the its not facing right I bought from amazon and ebay its actually the same seller .

[@brittanyslife8138]

Is it the side that makes noise 🤔 or do I put the silicone on the side that doesn't sound like anything when you rub your finger nail over it

[@teaandart]

@@brittanyslife8138 yes the side that make squeaky noise that should face the silicone side its a bit matt as well the other side to avoide is smooth and shiny.

[@teaandart]

@@brittanyslife8138 if you just try with little silicone and see . If this happens again then try another silicone .

[@carolstewart1704]

There's a clear plastic film on the back of the Holo film.. u may have only peeled this layer away.. chk to see if there is another layer (can be difficult to tell) and then peel that off and then all that should be left is the silicone mold with the Holo design and b rdy to use!🥰 I did this before too!! Hahaha

[@Taha-gomar-2023]

After how many hours am I allowed to remove the mold from the silicone?

[@teaandart]

I always demold next day 24 hours .

[@marystanford-terrien125]

Audio was really bad on this...couldn't hear a thing.

[@carolstewart1704]

OR.. lmao.. if u just want a pretty, thin random shaped Holo piece.. u could always just cut out a square of the Holo film and pour into it and let it cure.. I'm am SO SRY..I am out of ADHD medication for a few days now 🥺😭plz forgive me!!

[@dianeroberts2986]

Help!!! Why is it getting stuck to it??? Can you just make me one??