How to Manual Reset Canon G3010 Printer and fix 5B00 or P07 Error.

[@srinivasaprasanths886]

This is the only guide where the service mode entry was given correctly 💯 worked perfectly.

[@kiyohashi13]

million thanks for this guide! better than most of the tutorial out there!

[@Tech-aidSupport29]

You're Welcome It's our pleasure to help We are grateful for your support

[@munirajaambadi804]

Thank you so much same problem I solved by seeing your video.

[@Tech-aidSupport29]

You're Welcome

[@prashantbhargave29]

thank u so much same problem I solved by seeing your video. 100% work

[@Tech-aidSupport29]

You're Welcome

[@CamillePasajol]

Wow. Thank you, This guide is simple and very effective! 📢📢📢📢🔥🔥👍🏻👍🏻👍🏻👍🏻

[@Tech-aidSupport29]

You're Welcome

[@nursyarenasuraya8351]

Thank u so much. Its really work on my printer! ☺️👍🏻

[@Tech-aidSupport29]

You're Welcome

[@Krrrimmi]

IT WORKS! NO NEED to waste money on repairs. ARIGAPUT GOZAIMASU! 😃

[@johnbridge7531]

you deserve a subscription.

[@Tech-aidSupport29]

Thank you It's our pleasure to help We are grateful for your support

[@ManHoMay]

VERY HELPFUL

[@RogelieDurana-gr6mu]

Wow!!! It really works.. Thanks to you.. God bless u always

[@Tech-aidSupport29]

You're Welcome It's our pleasure to help We are grateful for your support

[@rahuljoshi1052]

THANK YOU SO MUCH SOLVED MY PROBLEM

[@Tech-aidSupport29]

You're Welcome It's our pleasure to help We are grateful for your support

[@diwisely2187]

It works, Alhamdulillah, shukran..

[@Tech-aidSupport29]

You're Welcome It's our pleasure to help We are grateful for your support

[@amieldorothysantos8406]

thanks much for the help. super helpful.

[@Tech-aidSupport29]

You're Welcome It's our pleasure to help We are grateful for your support

[@grace0819]

Thank you so much for the helpful tips, so easy to follow❤

[@Tech-aidSupport29]

You're Welcome It's our pleasure to help We are grateful for your support.

[@ruri_-ft2tx]

it helps! thank you so much 👍

[@Tech-aidSupport29]

You're Welcome

[@leongkeeng6676]

Very good, many thanks.

[@Tech-aidSupport29]

You're Welcome

[@awareness99]

THANK YOU SO MUCH SIR IT IS VERY USE FULL FOR ME. MY PROBLEM RESLOVED

[@Tech-aidSupport29]

You're Welcome It's our pleasure to help We are grateful for your support

[@pedrozurcher2674]

Super, it works. Solved my problem easey. Thaks a lot

[@Tech-aidSupport29]

You're Welcome It's our pleasure to help We are grateful for your support

[@riodembo82]

Terima kasih atas kontennya yang sudah membantu.

[@santoshchaudhary9419]

THANKS, IT REALY WORKED

[@Tech-aidSupport29]

You're Welcome It's our pleasure to help We are grateful for your support

[@justinmarino5218]

hello can u please make a video for P10? this is currently the display error that i have. my printer can print (after i turned it off and on again) about half a page and then would suddenly stopped printing, followed by the P10. i can connect wirelessly and scan stuff too. so aside from this printing problem, everything works. the ink are also not depleted so idk what to do.

[@vinaypalija8285]

THX DUDE IT WORKED

[@Tech-aidSupport29]

You're Welcome It's our pleasure to help We are grateful for your support

[@Goni2345]

Красавчик ❤❤❤🤝🤙🫡👍

[@ಠ_ಠ-ಸ8ಚ]

THANK YOUU SOOOO MUCHHHHH

[@ronykilava]

EEPROM data can be printed once only?

[@Tech-aidSupport29]

No Just repeat the process then you get the EEPROM data again

[@sider3nokia]

Thank you, that helps me

[@Tech-aidSupport29]

You're Welcome It's our pleasure to help We are grateful for your support

[@rrvelan]

thanks

[@AndrewArcenas]

D=000.0 DL=01000 What does it indicate? I hope you can help please.

[@kairatmynbayev9322]

Thanks a lot, this solved my problem

[@Tech-aidSupport29]

You're Welcome It's our pleasure to help We are grateful for your support ♥️

[@LexiMarkielleBidaja]

helpful lods

[@Tech-aidSupport29]

You're Welcome It's our pleasure to help We are grateful for your support

[@nnextechacademy]

Thank you somuch, it did help

[@Tech-aidSupport29]

You're Welcome It's our pleasure to help We are grateful for your support

[@5133719ify]

謝謝~幫了大忙

[@divyanshukevlog047]

Hello sir mere printer mein p09 error aa raha thik nhi ho raha is method se

[@ronykilava]

mine is not showing 0 waste ink sheet, what to do ?

[@vishalpavithran5499]

but the time to cheak d ink level print shows blank with faded starting

[@Tech-aidSupport29]

Try to print head cleaning

[@harisutradhar5079]

Thanks sir

[@Tech-aidSupport29]

You're Welcome It's our pleasure to help. We are grateful for your support.

[@santoshkalla412]

Good morning sir Followed the same procedure ,but the printer not turned into service mode still orange light is blinking P07 error

[@Tech-aidSupport29]

Try for the second time

[@ninatanangonan]

Same

[@kouayethierrydieun2972]

Merci

[@Tech-aidSupport29]

You're Welcome It's our pleasure to help. We are grateful for your support.

[@saranyan4685]

This method is not working for me.. wat to do..😢

[@PinchuPandaValorant]

what if i never replace pads and keep doing ur method

[@Tech-aidSupport29]

Yes It works even without replacing pads

[@PinchuPandaValorant]

​@@Tech-aidSupport29 work for g6070?

[@varshaam7802]

Hwy while printing its showing Orange light again

[@Tech-aidSupport29]

What is the error code??

[@adith9746]

The test print paper is getting stuck

[@Tech-aidSupport29]

Check paper tray for any foreign object inside that causes paper Jam

[@ZigCube-xs8yz]

Not working on my Canon G3010 with same error code.

[@Tech-aidSupport29]

Turn off the Printer and do it again

[@francineannemartizano1651]

Hello my printed didn’t work but the code is P2

[@Tech-aidSupport29]

Try to move the printhead to left side and clean stain on encoder strip

[@masturamdyon9782]

Mine is not working after press Stop 6 times. Tried it twice

[@Tech-aidSupport29]

Turn off your printer and try again

[@masturamdyon9782]

@@Tech-aidSupport29 did it few times. Still the same

[@akd42768]

👍

[@JimsonOjeda]

Ano Po Ang ibig sabihin ng D=000.0 wla na Po bang ink?

[@Tech-aidSupport29]

Ink Absorber Counter po yan sir

[@greenapple2287]

Bakit sakin sir kahit nasa service mode na nagbiblink padin yung orange

[@Tech-aidSupport29]

Hintayin nyo lang po hanggang ang stable

[@sakinahmajid9574]

My printer doesn't make on

[@Tech-aidSupport29]

Try to replace power supply

[@sadiyavssn]

Not working

[@BalaDhungana]

my printer did not work, I try 10times.

[@Tech-aidSupport29]

It might be a board problem

[@MrHKZ]

It didn't help printer went off

[@liutaichung]

million thanks for this guide! better than most of the tutorial out there!

[@Tech-aidSupport29]

You're Welcome

[@leahlopriego389]

Thanks😊

[@Tech-aidSupport29]

You're Welcome It's our pleasure to help We are grateful for your support.